506040
39
Zoom out
Zoom in
Previous page
1/52
Next page
E-38
System requirements
Operating System: Microsoft
®
Windows
®
95/98 English Version
CPU: i486/66MHz or higher (Pentium 75MHz or higher recommendend)
Connector: RS-232C port (D-sub 9-pin)
RAM: At least 16MB (32MB recommended)
Hard Disk: At least 20MB available for installation ;40MB available for opera-
tion
Monitor: Support for at least 256 colors
CD-ROM Drive
Microsoft Excel 95/97/2000 must also be installed on your system if you plan
to import Excel files using a version of the PC Link application that supports
Excel file import.
Sending Data from your personal computer
This section tells you how to send data from your personal computer to the
label printer.
Important!
Before performing any of the procedures in this section, make sure to load a
single-color tape for monochrome data or a colored tape for color image data.
You need to prepare the cable that comes with the package to connect the
PC to the label printer for data communication.
The FA-930C application that comes with the package, makes it possible for
you to use the label printer to print data created on your personal computer.
To connect the PC to the label printer
1. Turn off the power of the label printer and your PC.
2. Use the cable to connect to the label printer.
3. Turn on the power of the label printer and the PC.
To send data from the PC to the label printer
4. Recall the data you want to send.
See the User’s Guide that comes with the FA-930C for details on how to
recall data.
5. On the label printer, press COMPUTER
LINK.
This causes the message “RECEIVE? SET/
ESC” to appear on the label printer screen.
Press SET to execute the operation, or ESC to quit data communication.
If there are text remaining in the text input screen, a message “INPUT TEXT
WILL BE CLEARED! OK TO CONTINUE? SET/ESC” will appear.
Press SET to clear the text or ESC to return to the text input screen.
6. After pressing SET the message changes to “RECEIVE OK!”.
A communication error occurs on the label printer if it does not start to receive
data within about 20 seconds after the “RECEIVE OK!” message appears on
its screen.
If a communication error occurs on the label printer, press any key besides
OFF, FUNCTION, SHIFT, CODE or ON to clear the error, and then try again.
A message “NOW SENDING” appears on the screen of the label printer while
data is being transferred.
7. The data will be automatically printed.
8. Turn the label printer and the computer off and disconnect the cable.
Important! Label printer functions are disabled while data communication with
a computer is in progress.
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Casio KLC500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Casio KLC500 in the language / languages: English as an attachment in your email.

The manual is 0,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Casio KLC500

Casio KLC500 User Manual - German - 56 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info