506040
32
Zoom out
Zoom in
Previous page
1/52
Next page
E-31
FEED: MANUAL
label 1 label 2
About 21 mm (FUNCTION IMAGE (CUT))
Important!
Auto tape cut is not performed after a tape feed operation (FUNCTION and
then PRINT (FEED)). In such a case, manually cut the tape as required.
Pressing ESC does not stop an ongoing auto tape cut operation. If you want
to interrupt an ongoing auto tape cut operation, wait until the auto tape cut
operation is complete and then press ESC.
Manual Tape Cut
Pressing FUNCTION and then IMAGE (CUT) feeds the tape and then cuts it.
Since the tape is fed automatically before cutting, there is no danger of figures
from the previous print operation appearing at the beginning of the subsequent
print operation.
You can use FUNCTION IMAGE (CUT) to manually cut the tape after interrupt-
ing a print operation by pressing ESC.
Important!
Tape feed is always performed with a manual cut. You cannot perform the cut
operation alone.
FUNCTION IMAGE (CUT) does not work while a print operation is in progress,
while colored tape is loaded, or when there is no tape cartridge loaded.
Affixing a Label to a Surface
The label printer comes with a built-in peeler and a separate peeler tool that
makes it easy to remove the backing paper from printed labels.
Using the Peelers to Remove Label Backing Paper
The following procedures describe how to use the built-in peeler and the sepa-
rate peeler tool to remove the backing paper from printed labels.
To remove backing paper with the built-in peeler
1. Insert the label into the peeler.
Insert the label into the peeler until about 2mm
at the end of the label bends back slightly.
2. Pull the label straight down through the peeler
slot.
3. Repeat steps 1 and 2 until the backing paper works free from the label.
You can use scissors to trim a label to the size you want.
Peeler
Position the printed surface towards
the front of the label printer.
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Casio KLC500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Casio KLC500 in the language / languages: English as an attachment in your email.

The manual is 0,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Casio KLC500

Casio KLC500 User Manual - German - 56 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info