506040
19
Zoom out
Zoom in
Previous page
1/52
Next page
E-18
2. Move the cursor to the start block from which
you want to change the font and then press
SET to register your selection.
3. Move the cursor to the end block up to which you want to change the font
and then press SET to register your selection and change the font.
At this point, the label printer returns to the text input screen.
To change the font for lines of text
1. After performing the two steps under “To change the font for displayed text”,
use u and i to highlight “LINE” and then press SET.
2. Move the cursor to the start line from which you want to change the font and
then press SET to register your selection.
3. Move the cursor to the end line up to which you want to change the font and
then press SET to register your selection and change the font.
At this point, the label printer returns to the text input screen.
To change the font for specific characters
1. After performing the two steps under “To change the font for displayed text”,
use u and i to highlight “CHARACTER” and then press SET.
2. Move the cursor to the start character from which you want to change the
font and then press SET to register your selection.
3. Move the cursor to the end character up to which you want to change the
font and then press SET to register your selection and change the font.
At this point, the label printer returns to the text input screen.
To find out current font settings
Use the t and y cursor keys to move the cursor around the display. The font
indicator shows the current font setting for the character where the cursor is
located.
Important! Neighboring characters with different font settings, may overlap
on the printed tape. You can correct for this by changing the PITCH setting on
the BLOCK FORMAT menu (see page E-25), or by inputting a space between
the overlapping characters.
Character Styles
There are ten character styles: normal, bold, outline, shadow, raised, italic, italic-
bold, italic-outline, italic-shadow, and italic-raised.
The following sections describe how to change the character style for displayed
text, and how you can find out what the character style setting is for text on the
display.
To change the character styles
1. While there is text on the display, press
STYLE.
2. Use u and i to highlight the style you want
to change to and then press SET.
What you should do next depends on the
range you want to use.
The range setting procedures are the same
as those for font range settings.
ALL: See “To change the font for all the text”.
BLOCK: See “To change the font for blocks of text”.
LINE: See “To change the font for lines of text”.
CHARACTER: See “To change the font for specific characters”.
Important! Normal and Italic style settings can be applied to illustrations
(ILLUST).
The following table shows how STYLE settings affect illustrations (ILLUST).
STYLE SETTING
Normal
Italic
Bold
Outline
Shadow
Raised
Italic+Bold
Italic+Outline
Italic+Shadow
Italic+Raised
EFFECT ON
ILLUSTRATIONS
Normal
Italic
Normal
Normal
Normal
Normal
Italic
Italic
Italic
Italic
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Casio KLC500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Casio KLC500 in the language / languages: English as an attachment in your email.

The manual is 0,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Casio KLC500

Casio KLC500 User Manual - German - 56 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info