506037
22
Zoom out
Zoom in
Previous page
1/68
Next page
19
E
To affix a tape label to a surface
1. If necessary, use a pair of scissor to trim the tape to the size and shape
you want.
2. Peel off the backing of the label and affix it to the surface you want.
When using the CONT HALF CUT or FULL+HALF CUT
tape cut mode
Carefully twist the tape at the position where the tape is half cut, and peel off
the backing paper.
Half cut
When using the FULL CUT tape cut mode
Bend a corner of the tape and peel off the backing paper.
Note that pasting a label onto a surface can cause adhesive to remain on
the surface when you remove the label.
Important!
Do not affix tape labels to objects and in the locations described below.
Locations exposed to direct sunlight or rain
On the skin of a person or animal
On property belonging to others, utility poles, etc.
In parks, train stations, or other public places.
Containers that will be used for heating in a microwave oven.
To create margins to the left and right of label text
1. Before text is printed or after text printing is complete, press FEED.
This feeds the tape approximately 21 millimeters (
13
/
16
").
To cut a tape when NONE is selected for the MAR-
GINS setting
Automatic tape cutting is not performed at the end of printing when NONE is
selected for the margins setting (page 30). Perform the following step to cut
the tape manually.
1. After printing is complete, press CUT.
Important!
Make sure that the printer is level when performing a tape cut operation.
Also, do not pull on the tape or open the cassette cover.
To exit the printing operation
1. When the screen shown above is on the display, use and to select
EXIT, and then press SET twice.
This will display the initial screen.
See page 45 for information about using the STORE option on the above
screen.
Incompatible Surfaces
The label tape may not adhere properly to the following types of sur-
faces.
Surfaces that are rough
Surfaces that are wet, oily, dusty, etc.
Surfaces made of special plastics (silicon, PP, etc.)
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Casio KL7400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Casio KL7400 in the language / languages: English as an attachment in your email.

The manual is 1,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Casio KL7400

Casio KL7400 User Manual - German - 67 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info