506028
9
Zoom out
Zoom in
Previous page
1/27
Next page
G-8
Rückstellung des Speichers
Vor dem erstmaligen Gebrauch des Etikettendruckers, nach längerem
Nichtgebrauch oder wenn bei Einschalten des Stroms - selbst nach dem
Batteriewechsel - nichts passiert, sollte der Speicher des Etikettendruckers
rückgestellt werden.
Wichtig!
Mit dem Rückstellen des Etikettendrucker-Speichers werden alle
eingegebenen Daten gelöscht.
Rückstellen des Speichers
1. Sicherstellen, daß der Etikettendrucker ausgeschaltet ist.
2. Während Sie die Tasten PRINT und ESC
gedrückt halten, ON drücken, um den Strom
einzuschalten.
3. PRINT und ESC gedrückt halten und nur die
ON-Taste loslassen.
4. SET drücken, um den Etikettendrucker zu initialisieren, oder ESC drücken,
um die Rückstelloperation abzubrechen, ohne den Etikettendrucker zu
initialisieren.
Informationen über die Standard-Anfangseinstellungen des Etikettendruckers
nach der Rückstelloperation finden Sie unter Initialisierung des
Etikettendruckers auf Seite 21.
Ausschaltautomatik
Wird etwa sechs Minuten lang keine Taste betätigt, schaltet sich der
Etikettendrucker automatisch aus. Zum erneuten Einschalten ON drücken.
Etikettenband-Kassetten
Verwenden Sie die nachfolgenden Verfahren zum Einlegen einer Etikettenband-
Kassette in den Etikettendrucker. Nach dem Einlegen der Etikettenband-Kassette
müssen Sie dem Etikettendrucker nach dem unter Spezifizieren der Bandbreite
auf Seite 9 beschriebenen Verfahren die Breite des verwendeten Etikettenbands
mitteilen.
In
Ordnung!
Bänderführung
INT?
Wichtig!
Versuchen Sie niemals, das Etikettenband in die Kassette zurückzuschieben.
Wenn Etikettenband aus der Kassette herausgezogen ist, kann es nicht wieder
aufgewickelt werden. Der Versuch, das zu tun, kann zu Betriebsstörungen
des Etikettendruckers führen.
Mit diesem Drucker sind die folgenden Bandbreiten verwendbar: 6mm,
9mm, 12mm, 18mm.
Einlegen einer Etikettenband-Kassette
1. Sicherstellen, daß der Etikettendrucker ausgeschaltet ist.
2. Die Rückabdeckung öffnen.
Wenn sich bereits eine Kassette in dem Gerät
befindet, diese mit Daumen und Zeigefinger an
beiden Seiten greifen und gerade herausheben.
3. Die Halteklemme von einem neuen
Etikettenband entfernen und überprüfen, daß
das Etikettenband bereit zur Verwendung ist.
Stellen Sie sicher, daß sich das Etikettenband
unter der Bänderführung befindet und nicht
gebogen oder verdreht ist.
Nein!
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Casio KL70E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Casio KL70E in the language / languages: German as an attachment in your email.

The manual is 1,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Casio KL70E

Casio KL70E User Manual - English - 25 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info