587024
55
Zoom out
Zoom in
Previous page
1/70
Next page
53
EN
User Maintenance
A dirty print head or rubber roller will make proper label printing impossible.
Perform the procedure below to clean the print head and the rubber roller as
required.
Important!
Use a cotton swab or some other soft object to clean the print head and the
rubber roller. Use of a thin cotton swab is recommended.
1.
Press the tape compartment cover open button and open the cover.
If a tape cartridge is loaded in the printer, remove it.
Important!
The print head is hot immediately after printing, so wait until it is cooled
down before removing the tape cartridge.
2.
Use a cotton swab moistened with alcohol to wipe the surfaces of the
print head and rubber roller.
Take particular care when wiping
the points where the print head and
rubber roller come into contact.
Pressing FUNCTION and then
will cause the rubber roller to rotate.
You can also use a commercially available cassette tape recorder head
cleaning set for cleaning.
Troubleshooting
This section explains reference information that comes in handy when you
experience problems with printer operation. If, for any reason, you cannot fi nd
the solution to your problem here, contact your original retailer or authorized
CASIO service center.
Nothing appears on the display when I press ON.
Display contrast needs to be adjusted.
Adjust display contrast. (page 51)
The AC adaptor is not connected securely.
Correctly connect the AC adaptor. (page 13)
Batteries are dead or you are using the wrong type of batteries.
You are using the wrong type of AC adaptor.
Use the specifi ed AC adaptor or replace the batteries with new ones (sold
separately).
Batteries are not loaded correctly.
Remove the batteries and correctly reload them. (page 52)
Printing is unclear.
Printout is dirty.
Printing is light.
Dirt, dust, or other foreign matter is on the print head and/or the
rubber roller.
Clean the printer. (page 53)
There is slack in the ink ribbon.
Take up ink ribbon slack and correctly re-load the tape cartridge. (page 16)
Batteries are dead or you are using the wrong type of batteries.
You are using the wrong type of AC adaptor.
Use the specifi ed AC adaptor or replace the batteries with new ones (sold
separately).
Print density is not correct.
Adjust print density. (page 51)
Print head
Rubber
roller
55


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Casio KL-G2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Casio KL-G2 in the language / languages: English as an attachment in your email.

The manual is 7,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Casio KL-G2

Casio KL-G2 User Manual - German - 71 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info