587024

Casio KL-G2 Manual

32
Zoom out
Zoom in
Previous page
1/70
Next page
30
EN
Setting Item Description
DIRECTION Specifi es either vertical or horizontal text.
ALIGN
Specifi es alignment (LEFT, EQUAL, CENTER,
RIGHT) of the text within a block.
→
page 33
PITCH
Specifi es the space between characters in the
range of 0 to 31.9mm (0 to 1
1
/
4
").
•
The tape length is also adjusted in accordance
with the character pitch setting.
•
Specifi cation of character spacing is not
supported when EQUAL is specifi ed for PITCH
or when FIX is specifi ed for BLOCK-LENGTH.
BLOCK-LENGTH
•
AUTO: Automatically adjusts the block length in
accordance with the number of characters in the
block.
•
If you want to specify the block length manually,
select FIX for this setting.
→
page 31
7.
After all of the settings are the way you want, press SET.
Specifying the Print Format of All Text
Settings you confi gure with the procedure in this section is applied to all of the
text in a label, even if there are multiple blocks.
1.
Input text.
2.
Press FORM.
•
If there is only one block in the label, advance to step 4. In this case,
you can confi gure either block print format or overall print format
settings.
3.
Select ALL FORM and then press SET.
4.
Confi gure the settings of each item.
•
Use the
and arrow keys to select a setting item and then use
and
to change its setting.
Setting Item Description
MIRROR
Enables/disables mirror image printing. Select
NORMAL to print normal (not mirror image) text.
•
Select mirror image text when printing with an
iron-on transfer cartridge (sold separately) for
transfer to a handkerchief, T-shirt, etc.
•
MIRROR setting is not required when printing to
iron-on fabric tape (sold separately).
•
Mirror image text can also be printed with a
transparent tape cartridges (sold separately)
and affi xed to the back of glass or some other
transparent surface.
PROPORTIONAL
ON: Adjusts the character pitch in accordance
with differences in the width of each alphanumeric
character.
OFF: Character pitch disabled
SMOOTHING Enables/disables character line smoothing.
BLOCK-SPACE Specifi es the spacing between blocks.
MARGINS
Specifi es the size of leading and trailing margins.
•
You can select one of the margin settings below,
or NONE (page 20).
NARROW: Approximately 3mm (
1
/
8
") wide leading
and trailing label margins
MEDIUM: Approximately 10mm (
3
/
8
") wide leading
and trailing label margins
WIDE: Approximately 19mm (
3
/
4
") wide leading
and trailing label margins
Important!
Margin cut may not be performed when the tape
is short as defi ned by the following: approximately
28mm (1
1
/
8
") or less with NARROW margins;
approximately 35mm (1
3
/
8
") or less with MEDIUM
margins; approximately 44mm (1
3
/
4
") or less with
WIDE margins. After printing, use scissors or
some other implement to trim the margins.
TAPE LENGTH
•
AUTO: Automatically adjusts the label length in
accordance with the number of characters.
•
If you want to specify the label length manually,
select FIX for this setting.
→
page 32
… 32 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Casio KL-G2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Casio KL-G2 in the language / languages: English as an attachment in your email.

The manual is 7,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Casio KL-G2

Casio KL-G2 User Manual - German - 71 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info