709554

Casio KL-130 Manual

27
Zoom out
Zoom in
Previous page
1/35
Next page
25
EN
Error Messages/Display Messages
Message Possible Causes Action
ILLEGAL
CHARACTERS!
•
You are attempting
to input and print
characters that are
not allowed for the
bar code you are
printing.
• Re-input using proper
characters. (page 19)
INITIALIZE!
•
Data in memory has
become corrupted for
some reason.
• Press any key to initialize the
Label Printer.
LONGER
THAN SET!
OK/CANCEL
•
This message
appears when the
length of the tape
that will actually be
printed is longer than
the specifi ed tape
length.
• To print, press OK.
• To cancel printing, press .
You can then decrease the
number of characters, change
to a longer tape setting, or
select auto tape length.
LOAD A TAPE
12mm OR 18mm
• You are trying to use
the Logo function
or the bar code
function while a
6mm or 9mm tape
cartridge is loaded
in the printer.
•
Turn off the printer and
replace the tape cartridge
with a 12mm or 18mm
cartridge, and specify the
tape width setting on the
printer.
LOW BATTERY!
• Battery power is
low.
• Ambient
temperature is
below 10°C (50°F).
• Replace the batteries with
new ones or use the specifi ed
AC adaptor.
• Use the printer in a location
within the operating
temperature range (10°C to
35°C; 50°F to 95°F).
NO DATA!
• You are attempting
to recall data from
memory when there
is none stored.
• Store the data in memory and
then try again.
Message Possible Causes Action
NOT ENOUGH
DIGITS!
• You are trying to
print a bar code that
does not have the
required number of
digits.
• Re-input the correct number
of digits.
NO INPUT
TEXT!
• You are attempting
a print or preview
operation when no
text is input.
• Input the text and then try
again.
ODD NUMBER
OF DIGITS!
• There is an odd
number of input
digits when printing
an ITF bar code with
NO specifi ed for the
check digit.
• There is an even
number of input
digits when printing
an ITF bar code with
YES specifi ed for
the check digit.
• Re-input with a leading zero.
(page 19)
• Re-input with a leading zero.
(page 19)
PRINT ERROR!
• The tape became
jammed during
printing.
• Turn off the printer and
remove the tape cartridge.
Next, remove the jammed
tape.
• If the steps described above
do not clear the error message,
contact your retailer or your
nearest CASIO service center.
TOO MANY
LINES!
• The number of line
breaks you input
caused the label to
exceed the maximum
number of lines for
the tape you are
using.
• Use wider tape or reduce
the number of lines. The
maximum number of lines
for each tape width is shown
below.
6mm tape...1 line
9mm tape...1 line
12mm tape...Up to 2 lines
18mm tape...Up to 3 lines
… 27 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Casio KL-130 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Casio KL-130 in the language / languages: English as an attachment in your email.

The manual is 0,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info