709554
18
Zoom out
Zoom in
Previous page
1/35
Next page
16
EN
Part 6 Confi guring Form Settings
You can use the procedures in this section to confi gure tape length, vertical
text, and mirror text.
x
For information about text alignment and pitch, see “Confi guring the Printer
Setup”(page 21).
Tape Length Setting
You can use either of the methods below to specify the tape length.
x
AUTO:
Automatically adjusts tape length in accordance with the input
characters.
x
FIX:
Maintains a fi xed tape length in the range of 0cm to 99.9cm.
To have tape length set automatically (AUTO)
1. Press
FUNC
and then .
2. Use
and to select
AUTO
, and then press
OK
.
To specify a fi xed tape length (FIX)
1. Press
FUNC
and then .
2. Use
and to select
FIX
.
3. Use
and
to specify the tape length and then press
OK
.
x
You can also input a value for the tape length.
Note
x
Brackets to the left and right of the display tape length value provide the
information described below.
[ 6.0 cm]: Print will be the specifi ed length.
( 6.0 cm]: Print will be the specifi ed length, but text will be compressed
horizontally.
6.0 cm]: Print will be longer than that specifi ed length. (Text will be
compressed 50% in the text direction. Print will be longer than
specifi ed length.)
Vertical Text Printing
Use the procedure below to print text that reads vertically, from top to bottom.
To enable or disable vertical text printing
1. Press
FUNC
and then .
x
This causes the vertical print indicator to appear.
x
To cancel vertical text printing, press
FUNC
and then press
again.
Mirror Image Text
This setting makes it possible to print a mirror image of text.
x
Select mirror image text when printing with an iron-on transfer cartridge (sold
separately) for transfer to a handkerchief, T-shirt, etc.
x
Mirror image text can also be printed with a transparent tape cartridges
(sold separately) and affi xed to the back of glass or some other transparent
surface.
To confi gure the mirror image text setting
1. Press
FUNC
and then .
x
This causes the mirror image printing indicator to appear.
x
To cancel mirror image printing, press
FUNC
and then press
again.
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Casio KL-130 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Casio KL-130 in the language / languages: English as an attachment in your email.

The manual is 0,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info