563576

Casio GW3500B-1A-5121 Manual

4
Zoom out
Zoom in
Previous page
1/6
Next page
4
Operation Guide 5121
Use 9. D (+) and B (–) to change the
m
Day setting.
If you want to change the time setting at this time, •
press C and then perform the procedure starting
from step 3 under “To change the current time setting
manually”.
After the settings are the way you want, press
10.
A to
return to regular timekeeping.
This will cause the •
x
Second Hand to move
automatically to 12 o’clock and resume movement
from there.
The day of the week indicated by the •
v
Left Dial Hand
changes automatically in accordance with the date
(year, month, and day).
Note
The watch’s built-in full automatic calendar makes allowances for different month •
lengths and leap years. Once you set the date, there should be no reason to change
it except after you have the watch’s rechargeable battery replaced or after power
drops to Level 3.
Using the Stopwatch
The stopwatch measures elapsed time and split times.
Hand Functions
x
x Second Hand: Indicates the stopwatch 1/10-second
count.
v
v Left Dial Hand: Indicates the stopwatch 1/100-second
count.
n
n Right Dial Hands: Indicate the stopwatch minutes and
seconds.
To perform elapsed time measurement
Use 1. C to move the
v
Left Dial Hand to 0.
This indicates the Stopwatch Mode. •
Now you can perform either of following stopwatch operations.2.
You will not be able to perform any stopwatch operation while the hands are •
moving to their initial positions after you enter the Stopwatch Mode.
To perform an elapsed time operation
B
B
B B
D
Start Stop (Restart) (Stop) Reset
To pause at a split time
B
D
Normal stopwatch hand movement will
resume automatically after fi ve seconds.
B
D
Start Split Stop Reset
Note
The Stopwatch Mode can indicate elapsed time up to 23 minutes, 59.99 seconds. •
In the following cases, the hands of the watch are moving, so pressing • D or B will
not perform any stopwatch operation.
While the hands are moving to elapsed timekeeping after you enter the Stopwatch −
Mode
While the watch is changing dates at midnight −
Once started, stopwatch timing continues until you press • B to stop it, even if you
exit the Stopwatch Mode to another mode or timing reaches the stopwatch limit
defi ned above.
Whenever you enter the Stopwatch Mode, the hands of the watch move to their •
initial Stopwatch Mode positions. If you did not reset the stopwatch the last time you
used it, the hands will return to the positions they were in the last time you exited the
Stopwatch Mode.
The •
x
Second Hand indicates the 1/10-second count for the fi rst 30 seconds of
a stopwatch elapsed time operation. After that, the hand stops at 0. 1/10-second
timing continues internally after the fi rst 30 seconds, and the
x
Second Hand will
jump to the current value whenever B (Stop) or D (Split) is pressed.
Though the •
v
Left Dial Hand is stopped while an elapsed time measurement
operation is in progress, the watch keeps track of the 1/100-second count internally.
The
v
Left Dial Hand will jump to the current 1/100-second reading whenever you
stop the stopwatch or perform a split time operation.
Checking the Current Time in a Different Time Zone
You can use the World Time Mode to view the current time in one of 29 time
zones around the globe. Each time zone has a “city code”, which is a three-letter
abbreviation of a representative city in the zone. The representative city of the time
zone that is currently selected in the World Time Mode is called the “World Time City”.
Hand Functions
x
x Second Hand: Indicates the currently selected World
Time City.
v
v Left Dial Hand: Indicates the current STD (standard
time) or DST (daylight saving time)
setting of the currently selected World
Time City.
n
n Right Dial Hands: Indicate the current time in the
selected World Time City in 24-hour
format.
To view the time in another time zone
Use 1. C to move the
v
Left Dial Hand to STD or DST.
This indicates the World Time Mode. •
Use 2. D to move the
x
Second Hand to the city code you want to select as the
World Time City.
The •
n
Right Dial Hands will move to the current time in the currently selected
World Time City. At this time, the
z
Hour Hand and
c
Minute Hand will continue
to indicate the current time in the Home City.
For full information on city codes, see the “City Code Table”. •

> 5
@

> 6
@

>
6
@
If you think that the time indicated for the selected World Time City is not correct, •
it probably means that there is something wrong with your Home City settings.
Use the procedure under “To confi gure Home City settings” to correct the Home
City settings.
To specify standard time or daylight saving time (DST) for a time zone
Hold down
A for two
seconds

6>

In the World Time Mode, use 1. D to select the city code
for the time whose setting you want to change.
Wait until the •
n
Right Dial Hands complete their move
to the time in the currently selected World Time City.
You will not be able to perform step 2 of this procedure
until the hands stop moving.
Hold down 2. A for about two seconds until the watch
beeps. This will cause the
v
Left Dial Hand to toggle
between DST (daylight saving time) and STD (standard
time).
Note that you cannot switch between • STD (standard
time)/DST (daylight saving/summer time) while UTC is
selected as the World Time City.
Note that the • STD (standard time)/DST (daylight
saving/summer time) setting affects only the currently
selected time zone. Other time zones are not affected.
Swapping your Home City and World Time City
You can use the procedure below to swap your Home City and World Time City. This
capability can come in handy when you frequently travel between two locations in
different time zones.
The following example shows what happens when the Home City and World Time
City are swapped while the Home City originally is TYO (Tokyo) and the World Time
City is NYC (New York).
Home City World Time City
Before swapping
Tokyo
10:08 p.m.
(Standard time)
New York
9:08 a.m.
(Daylight saving time)
After swapping
New York
9:08 a.m.
(Daylight saving time)
Tokyo
10:08 p.m.
(Standard time)
To swap your Home City and World Time City
In the World Time Mode, use 1. D to select the World
Time City you want.
In this example, you would move the •
x
Second Hand
to NYC in order to select New York as the World
Time City.
Wait until the •
n
Right Dial Hands complete their move
to the time in the currently selected World Time City.
You will not be able to perform step 2 of this procedure
until the hands stop moving.
Hold down 2. B for about three seconds until the watch
beeps.
This will make the World Time City ( • NYC in this
example) your new Home City. At the same time, it will
change the Home City you had selected prior to step 2
(TYO in this example) to your World Time City.
After swapping the Home City and World Time City, •
the watch will stay in the World Time Mode. The
x
Second Hand will point to your new World Time City
(TYO in this example).
The •
n
Right Dial Hands will indicate the current time in
your new World Time City.
Note
If your current World Time City supports time calibration signal reception, making it •
your Home City enables calibration signal reception for that city.
Using the Alarm
When the alarm is turned on, an alarm will sound for about 10 seconds each day
when the time in the Timekeeping Mode reaches the preset alarm time. This is true
even if the watch is not in the Timekeeping Mode.
Hand Functions
x
x Second Hand: Indicates the current alarm ON/OFF
setting.
v
v Left Dial Hand: Points to ALM.
n
n Right Dial Hands: Indicate the current alarm time
setting in 24-hour format.
To change the alarm time setting
Use 1. C to move the
v
Left Dial Hand to ALM.
This indicates the Alarm Mode. •
Use 2. D (+) and B (–) to change the alarm time setting.
Each press of either button will move the •
n
Right Dial Hands one minute.
Holding down • D or B will start high-speed hand movement in the applicable
direction. To stop high-speed hand movement, press any button.
The alarm always works based on the time kept in the Timekeeping Mode. •
The watch will return to the Timekeeping Mode automatically if you do not perform •
any operation in the Alarm Mode for about two or three minutes.
To turn the alarm on or off
In the Alarm Mode, press A to toggle the alarm on and off. The
x
Second Hand will
indicate the current ON/OFF setting.
To stop the alarm
Press any button.

6
@

6
@

6
@
>
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Casio GW3500B-1A-5121 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Casio GW3500B-1A-5121 in the language / languages: English as an attachment in your email.

The manual is 1,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info