740143

Casio G-SHOCK GBD-100 - QW-3481 Manual

12
Zoom out
Zoom in
Previous page
1/31
Next page
Setting the Alarm
●
Make sure that the
e
symbol is shown on the
watch display when you perform the
procedure below.
●
If
e
is not displayed, refer to the information
at the link below.
l
Connecting with a Phone
1.
Y
Tap the “G-SHOCK MOVE” icon.
2.
Y
On the menu bar, tap “More”.
3.
Y
Tap “Watch”.
4.
Y
Select your preferred watch.
5.
Y
Select the setting you want to change
and then perform the operation shown on
the screen.
Phone Finder
You can use phone finder to trigger a sound
on the paired phone to help you find it. The
sound operation is performed even if your
phone is in vibrate mode.
Important!
●
Phone finder will not sound the tone
unless G-SHOCK MOVE is running on
the phone.
●
Do not use this function in areas where
phone call tones are restricted.
●
The tone sounds at a high volume. Do
not use this function when listening to
phone output over earphones.
1.
X
Enter the Timekeeping Mode.
l
Navigating Between Modes
2.
X
Hold down (A) for at least two seconds.
This displays the Timekeeping Mode
setting screen.
Pointer
3.
X
Use (A) and (D) to move the pointer to
[PHONE FINDER].
4.
X
Press (C).
5.
X
Use (A) and (D) to move the pointer to
[EXECUTE].
6.
X
Press (C).
This will establish a connection between
the watch and phone, and sound the
phone’s ringtone.
●
It will take a few seconds before the
phone tone sounds.
7.
X
Press any button to stop the sound.
●
You can press any watch button to stop
the phone tone, but only during the first
30 seconds after it starts to sound.
Note
●
Connection with your phone is not
possible while the watch’s Airplane
Mode is enabled. To connect with your
phone, disable the Airplane Mode.
l
Using the Watch in a Medical
Facility or Aircraft
Configuring Watch Settings
After establishing a connection between the
watch and a phone, you can use G-SHOCK
MOVE to configure watch settings and to view
information acquired by the watch.
●
Make sure that the
e
symbol is shown on the
watch display when you perform the
procedure below.
●
If
e
is not displayed, refer to the information
at the link below.
l
Connecting with a Phone
1.
Y
Tap the “G-SHOCK MOVE” icon.
2.
Y
On the menu bar, tap “More”.
3.
Y
Tap “Watch”.
4.
Y
Select your preferred watch.
5.
Y
Select the setting you want to change
and then perform the operation shown on
the screen.
Connection
Connecting with a Phone
Your watch can connect with a phone that is
paired with it.
●
If the watch is not paired with the phone you
want to connect with, refer to the information
below and pair them.
l
C
Pair the watch with a phone.
Important!
●
If you have problems establishing a
connection, it could mean that G-
SHOCK MOVE is not running on your
phone. On your phone’s home screen,
tap the “G-SHOCK MOVE” icon.
Perform the operation shown on the
screen to pair with the watch.
Unpairing
Unpairing the watch from a phone requires
both G-SHOCK MOVE and watch operations.
Note
●
If you are using an iPhone, also delete
the pairing information stored on the
phone.
● Deleting Pairing Information from G-
SHOCK MOVE
1.
X
If the watch is connected with a phone,
enable the watch’s Airplane Mode.
l
Using the Watch in a Medical Facility or
Aircraft
2.
Y
Tap the “G-SHOCK MOVE” icon.
3.
Y
On the menu bar, tap “More”.
4.
Y
Tap “Watch”.
5.
Y
Tap “Manage”.
6.
Y
Tap the watch you want to unpair.
7.
Y
Perform the operation shown on the
screen.
Operation Guide 3481
12
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Casio G-SHOCK GBD-100 - QW-3481 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Casio G-SHOCK GBD-100 - QW-3481 in the language / languages: English as an attachment in your email.

The manual is 2,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Casio G-SHOCK GBD-100 - QW-3481

Casio G-SHOCK GBD-100 - QW-3481 User Manual - German - 31 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info