586048
197
Zoom out
Zoom in
Previous page
1/254
Next page
7-8 Berechnung der Zinstage
(Datumsberechnungen)
Sie können die Anzahl der Tage zwischen zwei Datumsvorgaben berechnen (Anzahl der
Zinstage), oder Sie können eine zukünftige oder zurückliegende Datumsangabe in der Form
ermitteln, dass Sie ausgehend von einem vorgegebenen Datum eine bestimmte Anzahl von
(Zins-)Tagen vorwärts oder zurück rechnen.
Drücken Sie 2(DAYS) im zweiten Teil der TVM-Eingangsbildschirmanzeige, um das
folgende Eingabefenster zur Zinstage- oder Datumsberechnung zu öffnen.
6( g) 2(DAYS)
d1 .......... Datum 1
d2 .......... Datum 2
D ........... Anzahl der Tage
Das Datumseingabeformat ist: <Monat> . <Tag> <Jahr>
Es müssen immer zwei Stellen für den Tag eingegeben werden, was bedeutet, dass bei den
Tagen 1 bis 9 jeweils eine 0 vor der Zahl einzugeben ist.
Beispiel: Januar 2, 1990 Dezember 31, 2099
b.acbjja bc.dbcajj
Zur Eingabe von Monat, Tag und Jahr drücken Sie nach jeder Eingabe die w-Taste.
Nachdem Sie die Vorgabewerte eingegeben haben, werden Sie eines der folgenden
Funktionsmenüs sehen, um die entsprechende Berechnung auszuführen.
• { PRD } … {Anzahl der Tage von d1 bis d2 (d2 – d1)}
• { d1+D } … {d1 plus eine Anzahl D von Tagen (d1 + D)}
• { d1–D } … {d1 minus eine Anzahl D von Tagen (d1 – D)}
• Falls Eingabewerte nicht korrekt sind, erscheint eine Fehlermeldung (Ma ERROR).
Verwenden Sie das folgende Funktionsmenü, um auf die Eingabebildschirmanzeige zu
wechseln.
• { REPT } … {Bildschirmanzeige zur Dateneingabe}
7-8-1
Berechnung der Zinstage (Datumsberechnungen)
# Die Einstellanzeige kann dazu verwendet
werden, um entweder das 360-Tage-Jahr
oder das 365-Tage-Jahr für die weiteren
finanzmathematischen Berechnungen
voreinzustellen. Die Zinstage- oder
Datumsberechnungen werden in
Übereinstimmung mit dem voreingestellten
360- bzw. 365-Tage-Jahr realisiert, jedoch kann
im 360-Tage-Modus keine Datumsberechnung
ausgeführt werden:
Tag Jahr ist eingestellt. Falls Sie es trotzdem
versuchen, kommt es zu einem Fehler aufgrund
eines nicht übereinstimmenden Typs.
(Datum) + (Anzahl der Zinstage)
(Datum) - (Anzahl der Zinstage)
# Für die Berechnung zulässig ist folgender
Zeitbereich: 1. Januar 1901 bis 31. Dezember
2099.
197


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Casio fx-9750GA PLUS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Casio fx-9750GA PLUS in the language / languages: German as an attachment in your email.

The manual is 7,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info