723265
2
Zoom out
Zoom in
Previous page
1/2
Next page
Statistical Calculations (SD Mode)
• Press F l to enter the SD Mode for statistical
calculations using standard deviation.
If FIX or SCI is on the display, press F 9 first.
Data input always starts with A u.
Example: To calculate n1, n, o, n,x, and x2 for the
following data: 55, 54, 51, 55, 53, 53, 54, 52
Enter SD Mode. F lSD
0.
Input Data. A u 55 }
54 } 51 }
55 } 53 } }
54 } 52 }SD
52.
Sample standard deviatio
n
A qSD
1.407885953
Population standard deviation A pSD
1.316956719
Arithmetic mean A `SD
53.375
Number of data A rSD
8.
Sum of values A oSD
427.
Sum of squares of values A aSD
22805.
} } inputs the same data twice (as above).
You can also input multiple entries of the same data using
-. To input the data 110 ten times, for example, press 110
-10 }.
The above results can be obtained in any order, and not
necessarily that shown above.
To delete data you have just input, press A [.
kMaking Corrections During Data Input
Example 1: To change data you have just input.
Correct Actual Correction
51 }50 }A
[
51 }
130 -
31 }
120 -t
130 -
31 }
130 -
31 }
120 -
31
t130 -
31 }
Example 2: To change data you previously input.
Correct Actual Correction
51 }49 }49 A [
51 }
130 -
31 }
120 -
30 }
120 - 30 A [130 -
31 }
Technical Information
kKeys and Their Functions
• General
All clear ................................................ t
Arithmetic calculations ......................... +, ,, -,
.............. \, =
Backspace ........................................... Q
Clear (retains memory) ........................ k
Number input ....................................... 09, l
Power on; All reset ............................... 5
Sign change ......................................... E
• Memory
Memory in ............................................ A Y
Memory minus ..................................... A {
Memory plus ........................................ |
Memory recall ...................................... Z
• Special
Display/memory swap ......................... A N, A d
Exponent .............................................. e
Internal rounding .................................. A b
Parentheses ......................................... O, P
Pi (3.1415926536) ................................ A x
Select mode ......................................... F
Sexagesimal ........................................ I, A O
Shifts key functions ..............................A
• Scientific Functions
Arc cosine ............................................ A V
Arc sine ................................................ A j
Arc tangent ...........................................A g
Common antilogarithm ........................A Q
Common logarithm ..............................R
Convert to degrees .............................. A F 4
Convert to grads .................................. A F 6
Convert to radians ................................ A F 5
Cosine .................................................. W
Cube .....................................................A N
Cube root ............................................. A D
Engineering .......................................... A J, A P
Factorial ............................................... A f
Fraction* ............................................... C
Fraction* ............................................... A B
Hyperbolic ............................................ M
Natural antilogarithm ...........................A U
Natural logarithm ................................. T
Percent ................................................. A v
Polar-to-rectangular ............................. A z
Power ................................................... w
Random number .................................. A c
Reciprocal ............................................A X
Rectangular-to-polar ............................ A y
Example: The following operation uses 4 levels and 5
nested parentheses.
2
- O O O 3 + 4 - O O 5 + 4
The table below shows register contents following the
above input.
Register Contents
x4
L1(( 5
L24
L3((( 3
L42
L5
L6
kFormulas and Ranges
The following are the formulas and ranges that are applied
to various calculations that can be performed using this
calculator.
Coordinate Transformation
With polar coordinates,
θ
can be calculated within a range
of180°
θ
180°. The calculation range is the same for
radians and grads.
\
<
;
3[\
[
U
<
3RO
5HF
;
θ
θ
3U
Permutation
Input range: n r 0 (n, r : integers)
• Formula: nPr
Combination
Input range: n r 0 (n, r : integers)
• Formula:
nCr
Population Standard Deviation
Q Q
L 1
Q([L[)2
Q
[2 – ([)2 / Q
Sample Standard Deviation
Q1 Q– 1
L 1
Q([L[)2
[2 – ([)2 / Q
Q– 1
Arithmetic Mean
oQ
L 1
Q[L[
Q
Input Ranges
Functions Input Range
sinx
cosx
tanx
(DEG) x9109
(RAD) x5107π rad
(GRA) x11010 grad
However, for tan x:
x 90(2n1):DEG
x π2·(2n1):RAD
x 100(2n1):GRA
sin–1x
cos–1xx 1
tan–1xx 1
10100
sinhx
coshxx 230.2585092
tanhxx 1
10100
sinh–1xx 5
1099
cosh–1x1x 5
1099
tanh–1xx 1
logx/lnx1
10–99
x 1
10100
10x–1
10100
x
100
ex–1
10100
x 230.2585092
[0x 1
10100
x2x 1
1050
x3x 2.154434690
10
33
1/xx 1
10100 ;
x
0
[
3x 1
10100
x!0
x
69 (
x is an integer)
nPr/nCr
0r n
n11010
(n and r are integers)
RP
x2 y2110100
PR
0r 110100
(DEG)
9109
(RAD)
5107π rad
(GRA)
11010 grad
°’ ”
Input and Results:
Total of hour, minutes, and seconds digits
must be 10 or fewer (including separator
symbols)
Decimal Sexagesimal Conversions
x 2777777.777
xy
x0: –110100ylogx100
x0: y0
x0: yn;1
2n1(n is an integer)
However: –110100 ylogx100
x1/y
x0: y 0
–1101001/y logx100
x0: y0
x0: y2n1; 1
m(m 0; m and n are integers)
However: –110100 1/y logx100
a b/c*
Total of integer, numerator, and denominator
must be 10 digits or less(including division
marks).
n!
(nr)!
n!
r!(nr)!
Root ...................................................... A s
Sine ......................................................S
Squ are .................................................. K
Square root .......................................... A L
Tangent ................................................ h
Permutatio n .......................................... A m
Combination ......................................... A n
* fx-82SOLAR II/fx-260SOLAR II only
• Statistics (SD Mode)
Arithmetic mean ................................... A `
Data delete ........................................... A [
Data input ............................................. }
Number of data .................................... A r
Population standard deviation .............A p
Sample standard deviation .................. A q
Statistical register clear ....................... A u
Sum of squares of values .................... A a
Sum of values ...................................... A o
kExponential Display Formats
This calculator can display up to 10 digits. Larger values are
automatically displayed using exponential notation. In the
case of decimal value, you can select between two formats
that determine at what point exponential notation is used.
• NORM 1
With NORM 1, exponential notation is automatically used
for integer values with more than 10 digits and decimal
values with more than two decimal places.
• NORM 2
With NORM 2, exponential notation is automatically used
for integer values with more than 10 digits and decimal
values with more than nine decimal places.
To switch between NORM 1 and NORM 2
Press F 9. There is no indication on the display of which
format is currently in effect, but you can determine the
setting by performing the following calculation.
1 \ 200 =5. –03 NORM 1 format
0.005 NORM 2 format
All of the examples in this manual show calculation results
using the NORM 1 format.
kWhen you have a problem......
If calculation results are not what you expect or if an error
occurs, perform the following steps.
1. F 0 (COMP mode)
2. F 4 (DEG mode)
3. F 9 (NORM mode)
4. Check the formula you are working with to confirm it is
correct.
5. Enter the correct modes to perform the calculation and
try again.
kMaking Corrections During Calculations
If you make a mistake when inputting a value (but did
not yet press an operator key), use Q to backspace and
delete input digits one-by-one. Or you can press k to
clear the input entirely and start again.
In a series of calculations, press k while an intermediate
result is displayed to clear only the last calculation
performed.
To change the operator key (+, ,, -, \, w, As,
etc.) you just pressed, simply press the correct operator
key. In this case, the operator of the last key you press is
used, but the operation retains the order of precedence of
the operation for the first key you pressed.
kOverflow or Error Check
The following conditions make further calculation impossible.
a. When a result (whether intermediate or final) or a total
accumulated in memory is greater than ±9.999999999
1099. (E” indicator appears on the display.)
b. When function calculations are performed using a value
that exceeds the input range. (E” indicator appears
on the display.)
c. When an illogical operation (such as an attempt to
calculate o and σn while n 0) is performed during
statistical calculations. (E” indicator appears on the
display.)
d. When an illegal mathematical operation (such as division
by zero) is performed. (E indicator appears on
display.)
e. The total number of nested parentheses levels exceeds
six, or when more than 18 pairs of parentheses are used.
(“ 1” indicator appears on the display.)
To clear any of the above conditions, press t and
perform the calculation from the beginning.
In the case of condition e, you could also press k. This
clears the intermediate result just prior to the overflow, so
you can continue with the calculation from that point.
No error occurs when the result is within the range of
(11099) to (11099). Instead, the display shows all
zeros.
kPower Supply
This calculator is powered by a solar cell that converts
available light into electrical power.
Solar Cell Precautions
The solar cell requires at least 50 lux of light to provide
power.
If available light is too low, the display may become dim,
calculation functions may become impossible, or the
contents of the independent memory may be lost. If this
happens, move to an area with more light.
kOrder of Operations and Levels
Operations are performed in the following order of
precedence.
1. Functions
2. xy, x1/y, R P, P R, nPr, nCr
3. ,
4. ,
Operations with the same precedence are performed
from left to right, with operations enclosed in parentheses
performed first. If parentheses are nested, the operations
enclosed in the innermost set of parentheses are
performed first.
• Registers L1 through L6 store operations. There are six
registers, so calculations up to six levels can be stored.
Each level can contain up to three open parentheses, so
parentheses can be nested up to 18 times. RJA536287-001V02
Functions Input Range
SD
x 11050
n 110100
n, o : n 0
n –1 : n 0, 1
* fx-82SOLAR II/fx-260SOLAR II only
For a single calculation, calculation error is 1 at the 10th
digit. (In the case of exponential display, calculation error
is 1 at the last significant digit.) Errors are cumulative
in the case of consecutive calculations, which can also
cause them to become large. (This is also true of internal
consecutive calculations that are performed in the case of
xy, x1/y, x!, 3x, nPr, nCr, etc.)
In the vicinity of a function’s singular point and point of
inflection, errors are cumulative and may become large.
Calculation Capacity:
• Input/Basic Calculations
10-digit mantissa; or 10-digit mantissa plus 2-digit
exponent up to 10±99
kSpecifications
Power Supply: Solar cell
Operating Temperature: 0°C40°C (3104°F)
Dimensions: 9 (H)70.5 (W)121.5 (D) mm
3/8" (H)2-3/4" (W)4-3/4" (D)
Weight: 55g (1.9oz)
CASIO COMPUTER CO., LTD.
6-2, Hon-machi 1-chome,
Shibuya-ku, Tokyo 151-8543, Japan
Manufacturer:
CASIO COMPUTER CO., LTD.
6-2, Hon-machi 1-chome
Shibuya-ku, Tokyo 151-8543, Japan
Responsible within the European Union:
Casio Europe GmbH
Casio-Platz 1
22848 Norderstedt, Germany
www.casio-europe.com
fx-82SOLAR260SOLARIINFEN161212.indd2fx-82SOLAR260SOLARIINFEN161212.indd2 16/12/1210:5116/12/1210:51
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Casio FX-82 Solar II at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Casio FX-82 Solar II in the language / languages: English as an attachment in your email.

The manual is 0,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Casio FX-82 Solar II

Casio FX-82 Solar II User Manual - German - 2 pages

Casio FX-82 Solar II User Manual - Dutch - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info