518002
182
Zoom out
Zoom in
Previous page
1/196
Next page
Digital Camera
E
User’s Guide
Thank you for purchasing this CASIO product.
Before using it, be sure to read the precautions contained in this User’s Guide.
Keep the User’s Guide in a safe place for future reference.
For the most up-to-date information about this product, visit the official EXILIM
Website at http://www.exilim.com/
2
As you unpack your camera, check to make sure that all accessories shown below
are included. If anything is missing, contact your original retailer.
*1 The type of USB-AC adaptor included varies according to the country or
geographic area where the camera is sold.
*2 A power cord is included with the AD-C53U USB-AC adapter. The shape of the
power cord plug varies according to the country or geographic area where the
camera is sold.
Accessories
Rechargeable lithium ion
battery (NP-130)
USB-AC adaptor*
1
(AD-C54UG/AD-C53U)
Power cord
*
2
Micro USB cable Basic Reference
Strap
To attach the strap to the camera
Attach strap here.
3
The contents of this manual are subject to change without notice.
The contents of this manual have been checked at each step of the production
process. Feel free to contact us if you notice anything that is questionable,
erroneous, etc.
Any copying of the contents of this User’s Guide, either in part or its entirety, is
forbidden. Except for your own personal use, any other use of the contents of this
manual without the permission of CASIO COMPUTER CO., LTD. is forbidden
under copyright laws.
CASIO COMPUTER CO., LTD. shall not be held liable for any damages or lost
profits suffered by you or any third party due to the use or malfunction of this
product.
CASIO COMPUTER CO., LTD. shall not be held liable for any damages or lost
profits caused by loss of memory contents due to malfunction, repair, or any other
reason.
Note that the example screens and product illustrations shown in this User’s Guide
may differ somewhat from the screens and configuration of the actual camera.
LCD Panel
The liquid crystal panel of the monitor screen uses high-precision technology that
provides a pixel yield in excess of 99.99%. This means that some very small number
of pixels may not light or may remain lit at all times. This is due to the characteristics
of the liquid crystal panel, and does not indicate malfunction.
Read this first!
Take test shots
Before shooting your final image, shoot a test shot to ensure that the camera is
recording correctly.
4
Contents
Contents
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Read this first! . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
General Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Monitor Screen Contents and How to Change Them . . . . . . . . . . . . . . . . . . . 10
]\
Quick Start Basics 14
What you can do with your CASIO camera . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
First, charge the battery prior to use.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
] To load the battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
] Charge the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Configuring Basic Settings the First Time You Turn On the Camera. . . . . . . . 21
Preparing a Memory Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
] Supported Memory Cards. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
] To load a memory card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
] To format (initialize) a new memory card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Turning the Camera On and Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Holding the Camera Correctly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
To shoot a snapshot. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
] Selecting an Auto Recording Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
] To shoot a snapshot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Viewing Snapshots . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Deleting Snapshots and Movies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Snapshot Shooting Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
]\
Snapshot Tutorial 36
Selecting the Recording Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Using the Control Panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Using the Self-timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .(Self-timer) . . 39
Adjusting White Balance . . . . . . . . . . . . . . . . . . . . . . . . . . (White Balance) . . 40
Selecting a Focus Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Focus) . . 42
Specifying ISO Sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (ISO) . . 44
Recording Beautiful Portraits . . . . . . . . . . . . . . . . . . . . . .(Make-up Level) . . 45
Correcting Image Brightness . . . . . . . . . . . . . . . . . . . . . . . . . . . (EV Shift) . . 46
Using Flash . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Flash) . . 47
Specifying the Metering Mode . . . . . . . . . . . . . . . . . . . . . . . . . (Metering) . . 49
Shooting with Zoom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
] Monitor Screen Information when Zooming . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
] Zooming with Super Resolution . . . . . . . . . . . . . . . . . . . . . . . . (Zoom (SR)). . . 53
] Expanding the Zoom Range to
Shoot Clearer Snapshots . . . . . . . . . . . . . . . . . . . . . . . . . .(Multi SR Zoom). . . 54
Shooting a Burst of Images . . . . . . . . . . . . . . . . . . . . . . (High Speed CS) . . 54
Using Focus Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
] Shooting with a Blurred Background . . . . . . . . . . . . .(Blurred Background). . . 58
] Shooting with Full Focus Macro . . . . . . . . . . . . . . . . . .(All-In-Focus Macro). . . 59
5
Contents
Shooting with Artistic Effects . . . . . . . . . . . . . . . . . . . . . . . . (ART SHOT) . . 60
] Saving a Second Normal Image When
Shooting With HDR Art . . . . . . . . . . . . . . . . . . . . . . . . .(Double (HDR Art)). . . 62
Shooting with Triple Shot. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
]\
Recording Movies 64
To record a movie . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
] Audio. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Recording a High-definition Movie. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Recording a High Speed Movie . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Using Prerecord Movie . . . . . . . . . . . . . . . . . . . . . . . . (Prerecord (Movie)) . . 69
Recording a Movie for YouTube . . . . . . . . . . . . . . . . . . . . . (For YouTube) . . 71
Shooting a Snapshot while Shooting a Movie . . . . . (Snapshot In Movie) . . 72
]\
Using BEST SHOT 73
To shoot with BEST SHOT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
Creating and Using Your Own Setups . . . . . . . . . . . . . (CUSTOM SHOT) . . 75
Digitally Correcting for Overexposure and Underexposure . . . . . . (HDR) . . 76
Shooting Bright Images in the Dark
without Flash . . . . . . . . . . . . . . . . . . . . . . . . . . . . (High Speed Night Shot) . . 77
Shooting with a Super Wide Angle of View . . . . . . . . . . . . . . (Wide Shot) . . 78
Shooting a Panorama Image . . . . . . . . . . . . . . . . . . . . .(Slide Panorama) . . 81
Shooting with Priority on Subject Faces . . . . (High Speed Best Selection) . . 83
Configuring the Camera to
Help You Better Time Your Shots . . . . . . . . . . . . . . . . . . .(Lag Correction) . . 84
Using Continuous Shutter with Auto Focus . . . . . . . . . . . . . . . . . (AF-CS) . . 86
Shooting RAW Images . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Raw Image) . . 87
Shooting with High Speed Anti Shake . . . . . . . . (High Speed Anti Shake) . . 87
Shooting Snapshots . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Snapshot) . . 88
Using a TV Screen to Shoot Snapshots . . . . . . . . . . . . (HDMI TV Output) . . 89
]\
Advanced Settings (REC MENU) 91
Configuring Recording Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
Assigning Functions to the Control Dial . . . . . . . . . . . . . . . . (Control Dial) . . 92
Assigning Functions to the [4] and [6] Keys . . . . . . . . . . . . . . . (L/R Key) . . 93
Saving a Second Normal Image When
Shooting With HDR Art . . . . . . . . . . . . . . . . . . . . . . . (Double (HDR ART)) . . 93
To select the snapshot image size . . . . . . . . . . . . . . . . . . . . (Image Size) . . 94
Specifying Snapshot Image Quality . . . . . . . . . . . . . . . . . (Image Quality) . . 96
Movie Image Quality Settings . . . . . . . . . . . . . . . . . . . . . . (Movie Quality) . . 96
Specifying ISO Sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (ISO) . . 97
Specifying the ISO Sensitivity Upper Limit . . . . . . . . . . . . (ISO High Limit) . . 98
Zooming with Super Resolution . . . . . . . . . . . . . . . . . . . . . . .(Zoom (SR)) . . 98
Specifying the Auto Focus Area . . . . . . . . . . . . . . . . . . . . . . . . . (AF Area) . . 99
6
Contents
Reducing the Effects of Camera and Subject Movement . . . .(Anti Shake) . 100
Optimizing Image Brightness . . . . . . . . . . . . . . . . . . . . . . . . . . . (Lighting) . 101
Shooting with Continuous Auto Focus . . . . . . . . . . . . . . (Continuous AF) . 101
Shooting with Face Detection . . . . . . . . . . . . . . . . . . . . . (Face Detection) . 102
Turning Digital Zoom On or Off . . . . . . . . . . . . . . . . . . . . . . (Digital Zoom) . 103
Reducing Wind Noise during Movie Recording . . . . . . . (Wind Noise Cut) . 103
Recording Beautiful Portraits . . . . . . . . . . . . . . . . . . . . . .(Make-up Level) . 103
Correcting Image Brightness . . . . . . . . . . . . . . . . . . . . . . . . . . . (EV Shift) . 104
Adjusting White Balance . . . . . . . . . . . . . . . . . . . . . . . . . . (White Balance) . 104
Selecting a Focus Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Focus) . 104
Using the Self-timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .(Self-timer) . 104
Specifying the Metering Mode . . . . . . . . . . . . . . . . . . . . . . . . . (Metering) . 104
Specifying Flash Intensity . . . . . . . . . . . . . . . . . . . . . . . . . (Flash Intensity) . 105
Controlling Image Sharpness . . . . . . . . . . . . . . . . . . . . . . . . . (Sharpness) . 105
Controlling Color Saturation . . . . . . . . . . . . . . . . . . . . . . . . . . (Saturation) . 105
Adjusting Image Contrast . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .(Contrast) . 105
Using the Auto Focus Assist Light . . . . . . . . . . . . . . . . . (AF Assist Light) . 106
Displaying the On-screen Grid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Grid) . 106
Turning on Image Review . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Review) . 107
Using Icon Help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Icon Help) . 107
Configuring Power On Default Settings . . . . . . . . . . . . . . . . . . . (Memory) . 108
]\
Viewing Snapshots and Movies 109
Viewing Snapshots . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109
Viewing a Movie. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109
Viewing a Panorama Image. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110
Viewing Continuous Shutter Images . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .111
] Deleting Continuous Shutter Images . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112
] Dividing Up a CS Group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114
] Copying a CS Group Image . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115
Zooming an On-screen Image . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115
Displaying the Image Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116
Viewing Snapshots and Movies on a TV Screen . . . . . . . . . . . . . . . . . . . . . . 116
]\
Other Playback Functions (PLAY MENU) 119
Playing a Slideshow on the Camera . . . . . . . . . . . . . . . . . . . . (Slideshow) . 119
] Transferring Music from Your Computer to Camera Memory . . . . . . . . . . . . . . 120
Creating a Snapshot of Movie Frames . . . . . . . . . . . . . (MOTION PRINT) . 121
Editing a Movie on the Camera . . . . . . . . . . . . . . . . . . . . .(Movie Editing) . 122
Optimizing Image Brightness . . . . . . . . . . . . . . . . . . . . . . . . . . . (Lighting) . 123
Adjusting White Balance . . . . . . . . . . . . . . . . . . . . . . . . . . (White Balance) . 124
Adjusting the Brightness of an Existing Snapshot . . . . . . . . . (Brightness) . 124
Selecting Images for Printing . . . . . . . . . . . . . . . . . . . . . . (DPOF Printing) . 125
Protecting a File Against Deletion . . . . . . . . . . . . . . . . . . . . . . . . .(Protect) . 125
7
Contents
Editing the Date and Time of an Image . . . . . . . . . . . . . . . . . (Date/Time) . 127
Rotating an Image . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .(Rotation) . 127
Resizing a Snapshot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Resize) . 128
Cropping a Snapshot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Trimming) . 128
Copying Files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Copy) . 129
Dividing Up a Continuous Shutter Group . . . . . . . . . . . . . . (Divide Group) . 129
Combining CS Images into a Single Still Image . . . . . . . . (CS Multi Print) . 130
Editing a CS Image . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .(CS Frame Edit) . 130
]\
Printing 131
Printing Snapshots. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131
Connecting Directly to a PictBridge Compatible Printer . . . . . . . . . . . . . . . . 131
Using DPOF to Specify Images to be Printed and
the Number of Copies . . . . . . . . . . . . . . . . . . . . . . . . . . . . (DPOF Printing) . 133
]\
Using the Camera with a Computer 138
Things you can do using a computer... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 138
Using the Camera with a Windows Computer . . . . . . . . . . . . . . . . . . . . . . . . 139
] Viewing and Storing Images on a Computer. . . . . . . . . . . . . . . . . . . . . . . . . . . 139
] Playing Movies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 142
Using the Camera with a Macintosh . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143
] Connecting the Camera to Your Computer and Saving Files . . . . . . . . . . . . . . 143
] Playing a Movie. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 145
Using an SD Memory Card with Built-in LAN . . . . . . . . . . . . . . . . . . . . . . . . 146
] Transferring Images with an Eye-Fi Card . . . . . . . . . . . . . . . . . . . (Eye-Fi). . 146
] Using a Smartphone to
Play Back Images Stored on a FlashAir Card . . . . . . . . . . . . . . . (FlashAir). . 148
Files and Folders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150
Memory Card Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 151
]\
Other Settings (SETTING) 153
Enabling Power Saving . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (ECO Mode) . 153
Adjusting Monitor Screen Brightness . . . . . . . . . . . . . . . . . . . . . .(Screen) . 153
Turning off Eye-Fi Card Communication . . . . . . . . . . . . . . . . . . . . (Eye-Fi) . 154
Configuring FlashAir Card Communication Settings . . . . . . . . . (FlashAir) . 154
Configuring Camera Sound Settings . . . . . . . . . . . . . . . . . . . . . (Sounds) . 154
Creating an Image Storage Folder . . . . . . . . . . . . . . . . . . (Create Folder) . 155
Time Stamping Snapshots . . . . . . . . . . . . . . . . . . . . . . . . . . .(Timestamp) . 155
Auto Image Orientation Detection and Rotation . . . . . . . . . . (Auto Rotate) . 156
Specifying the File Name Serial Number Generation Rule . . . . . (File No.) . 156
Configuring Sleep State Settings . . . . . . . . . . . . . . . . . . . . . . . . . . (Sleep) . 157
Configuring Auto Power Off Settings . . . . . . . . . . . . . . . (Auto Power Off) . 157
Configuring [r] Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .(REC) . 158
Configuring [p] Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (PLAY) . 158
8
Contents
Disabling File Deletion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .(Delete Key) . 158
Configuring World Time Settings . . . . . . . . . . . . . . . . . . . . . (World Time) . 159
Setting the Camera’s Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Adjust) . 160
Specifying the Date Style . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Date Style) . 160
Specifying the Display Language . . . . . . . . . . . . . . . . . . . . . . (Language) . 161
Configuring USB Protocol Settings . . . . . . . . . . . . . . . . . . . . . . . . . .(USB) . 161
Selecting the HDMI Terminal Output Method . . . . . . . . . . . (HDMI Output) . 161
Formatting Built-in Memory or a Memory Card . . . . . . . . . . . . . . .(Format) . 162
Resetting the Camera to Factory Defaults . . . . . . . . . . . . . . . . . . .(Reset) . 162
]\
Appendix 163
Safety Precautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 163
Precautions During Use. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 170
Power Supply. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 173
] Charging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 173
] Battery Precautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 174
] Using the Camera in another Country . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 174
Using a Memory Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 175
Reset Initial Default Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 177
Using the On-screen Histogram to Check Exposure . . . . . . (+Histogram) . 179
When things don’t go right... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 181
] Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 181
] Display Messages. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 186
Number of Snapshots/Movie Recording Time . . . . . . . . . . . . . . . . . . . . . . . . 188
Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 192
9
The numbers in parentheses indicate the pages where each item is explained.
General Guide
1
Mode dial
(pages 28, 36, 64)
2
Zoom controller
(pages 29, 50, 115)
3
Shutter button
(pages 26, 28)
4
[Õ] (Continuous
Shutter) button (page 54)
5
[ON/OFF] (Power)
(pages 21, 26)
6
Flash (page 47)
7
Flash switch (page 47)
8
Front lamp
(pages 39, 106)
9
Lens
bk
Microphones (page 65)
bl
Back lamp
(pages 18, 20, 26, 29,
48)
bm
[0] (Movie) button
(page 64)
bn
[r] (REC) button
(page 26)
bo
Strap hole (page 2)
bp
Terminal cover
bq
[USB] port
(pages 17, 19)
br
[HDMI OUT]
HDMI output (micro)
(pages 89, 117)
bs
[MENU] button
(pages 64, 91)
bt
[p] (PLAY) button
(pages 26, 32)
ck
[SET] button
(pages 38, 64, 91)
cl
Control dial
([8][2][4][6])
(pages 10, 38, 64, 73,
91, 92)
cm
Monitor screen
(pages 10, 28)
1234675
bk 89
ckcl bt bs
bm
cm
bl bn bo bp
bq
br
Front Back
cp cncq co
Bottom
cn
Battery/memory card slots (pages 16, 24)
co
Battery cover
cp
Speaker
cq
Tripod hole
Use this hole when attaching to a tripod.
10
. Control Dial
In addition to using the up, down, left, and right buttons, you can also use the control
dial to perform operations.
Depending on the function, certain operations cannot be performed using the
control dial.
The monitor screen uses various indicators, icons, and values to keep you informed
of the camera’s status.
The sample screens in this section are intended to show you the locations of all the
indicators and figures that can appear on the monitor screen in various modes.
They do not represent screens that actually appear on the camera.
. Snapshot Recording (1 Shot)
Monitor Screen Contents and How to Change Them
1
Self-timer mode (page 39)
2
Face Detection (page 102)
3
Recording mode (page 28)
4
Image deterioration indicator/
Zoom (SR) indicator (page 52)
5
Remaining movie memory
capacity (page 64)
6
Remaining snapshot memory capacity
(page 188)
7
Snapshot image size/Quality (pages 94, 96)
8
Movie quality (FHD/STD movie)
(pages 64, 67)/
Recording speed (high speed movie) (page 67)
9
Focal distance
(Converted to 35 mm film format.) (page 51)
bk
Anti Shake (page 100)
bl
Timestamp indicator (page 155)
bm
Histogram (page 179)
bn
AF Area (page 99)
bo
Date/Time (pages 21, 160)
bp
Focus frame (pages 29, 99)
bq
Battery level indicator (page 21)
br
Metering mode (page 49)
bs
Flash (page 47)
bt
Exposure compensation (page 46)
ck
Make-up level (page 45)
cl
ISO sensitivity (page 44)
cm
Focus mode (page 42)
cn
White balance (page 40)
[8] [2] [4] [6] : Press the applicable button (up, down, left, right).
Control dial
8
9
bk
bo
bl
bm
13567
bq
ck
bs
br
bt
cm
cn
cl
2
4
bn
bp
11
NOTE
The semi-transparent gray frame on the monitor screen indicates the area that is
recorded when shooting a movie. The area within the frame is recorded for a
movie.
Depending on recording settings, the aperture, shutter speed, and ISO sensitivity
values may not appear on the monitor screen. These values will be red if the Auto
Exposure (AE) is not correct for some reason.
. Snapshot Recording (Burst Shooting)
. Movie Recording
1
Continuous Shutter (CS) speed (page 55)
2
Recording mode (page 28)
3
Allowable CS time/number of CS images
(page 55)
4
Continuous Shutter mode (page 54)
5
Prerecord CS shots (page 56)
6
Maximum CS shots (page 55)
1
Snapshot recording mode (Snapshot In Movie)
(page 72)
2
Audio recording disabled (page 67)
3
Recording mode (page 64)
4
Movie recording time (page 64)
5
Remaining movie memory capacity (page 64)
6
Movie recording in progress (page 64)
7
Movie quality (FHD/STD movie)
(pages 64, 67)/
Recording speed (high speed movie) (page 67)
8
Remaining snapshot memory capacity
(page 188)
123
4
5
6
6
5
42
3
7
8
1
12
. Snapshot Viewing
. CS Image Viewing
. Movie Playback
1
File type
2
Protect indicator (page 125)
3
Snapshot image size (page 94)
4
Folder name/file name (page 150)
5
Snapshot image quality (page 96)
6
Recording mode (page 28)
7
Histogram (page 179)
8
Date/time (page 160)
9
Metering mode (page 104)
bk
White balance (page 124)
bl
Battery level indicator (page 21)
bm
Flash (page 47)
bn
Exposure compensation (page 46)
bo
Shutter speed
bp
Aperture value
bq
ISO sensitivity (page 44)
br
Focal distance
(Converted to 35 mm film format.)
1
Number of images in the group (page 111)
2
CS group icon (page 111)
1
No audio data available
2
Movie recording time (page 109)
3
Recording mode/Movie quality/speed
(pages 64, 67, 67)
4
YouTube (page 71)
2413
6
5
7
bk 9bl
bo
bn
bm
bq
bp
br
8
12
1 2
3
4
13
. Configuring Monitor Screen Settings
Each press of [8] (DISP) will cycle through display settings that
display or hide on-screen information. You can configure separate
settings for the REC mode and PLAY mode.
REC mode
PLAY mode
Information on Displays setting information.
Information on,
histogram on
Displays setting information and a
histogram (page 179) on the right side of
the display.
Information off Hides setting information.
Information display
on
Displays settings when shooting, current date and time,
and other information.
Information on,
histogram on
Displays settings when shooting, current date and time,
histogram (page 179), and other information.
Information display
off
No information displayed when shooting.
[8] (DISP)
Histogram
14
Quick Start Basics
Quick Start Basics
Your CASIO camera is packed with a powerful selection of features and functions to
make recording of digital images easier, including the following main functions.
What you can do with your CASIO camera
ART SHOT
A variety of artistic effects help to make even common,
ordinary subjects become more novel and exciting.
“ART SHOT” provides the following effects: HDR Art,
Toy Camera, Soft Focus, Light Tone, Pop, Sepia,
Monochrome, Miniature, Fisheye.
High Speed Night Shot
The camera shoots a series of images and then
merges them into a final image. The result is a bright
image, even if shot in the dark without a flash.
Triple Shot
Pressing the shutter button shoots a burst of three
images and stores them in memory. This feature is
great for making sure you don’t miss those special
moments when kids are around.
Blurred Background/All-In-Focus
Macro (Focus Control)
Focus Control shoots and analyzes a burst of multiple
images and combines them in a way that produces
either image in which the background is blurred or
everything is in focus: from nearby objects to distant
objects.
*See page 60 for more information.
*See page 77 for more information.
*See page 63 for more information.
*See page 58 for more information.
15
Quick Start Basics
Premium Auto Pro
Select Premium Auto Pro recording and the
camera automatically determines whether you
are shooting a subject or scenery, and other
conditions. Premium Auto Pro delivers higher
image quality than standard Auto.
Wide Shot
With this feature, a number of images are shot and
then combined to produce an image with a super-wide
angle of view that exceeds the widest angle of view
possible with the lens. Converted to 35 mm
equivalents, the focal distances available with this
feature enable shooting with approximate angles of
view of 15 mm and 19 mm.
High Speed Movie
Movies can be recorded at up to 1000 frames per
second. This makes it possible to clearly view
phenomena that are invisible to the human eye, in
slow motion.
FHD Movie Recording
You can record movies in high-quality FHD.
(1920
x
1080 pixels 30 fps)
*See page 28 for more information.
*See page 78 for more information.
*See page 67 for more information.
*See page 67 for more information.
16
Quick Start Basics
Note that the battery of a newly purchased camera is not charged. Perform the steps
below to load the battery into the camera and charge it.
Your camera requires a special CASIO rechargeable lithium ion battery (NP-130)
for power. Never try to use any other type of battery.
1. Open the battery cover.
2. Load the battery.
With the EXILIM logo on the
battery facing downwards (in the
direction of the lens), hold the
stopper next to the battery in the
direction indicated by the arrow as
you slide the battery into the
camera. Press the battery in until
the stopper secures it in place.
3. Close the battery cover.
First, charge the battery prior to use.
To load the battery
EXILIM logo
Stopper
Battery
OK
NG
17
Quick Start Basics
To replace the battery
1. Open the battery cover and
remove the current battery.
2. Load a new battery.
You can use either of the two following methods to charge the camera’s battery.
USB-AC adaptor
USB connection to a computer (Using the included micro USB cable.)
. To charge with the USB-AC adaptor
The adaptor lets you charge the battery while it is loaded in the camera.
While the camera is turned off, connect in the sequence shown below.
Charging time: Approximately 240 minutes
Charge the Battery
Stopper
1
3
2
4
3
2
USB-AC adaptor
(AD-C53U)
u mark of the small (micro
USB) connector facing the lens
side of the camera.
[USB] port
USB-AC adaptor
(AD-C54UG)
Micro USB cable
(included with camera)
Power cord
18
Quick Start Basics
IMPORTANT!
A battery that has not been used for a long time, or ambient temperature extremes
can cause charging to take longer than normal. If charging takes longer than about
five hours, a timer will terminate it automatically, even if the battery is not fully
charged. This is indicated by the back lamp flashing red. If the battery has not been
used for a very long time, charging may be terminated automatically and the back
lamp may start flashing red after only about 60 minutes. In either case, disconnect
the USB cable from the camera and then reconnect it to resume charging.
Make sure that you insert the cable connector into the [USB] port until you feel it
click securely into place. Failure to insert the connector fully can result in poor
communication or malfunction.
Note that even while the connector is fully inserted, you
still will be able to see the metal part of the connector as
shown in the illustration.
The USB-AC adaptor will become warm during charging.
This is normal and does not indicate malfunction.
The shape of the power plug depends on each country or
geographic area.
Back Lamp Operation
Lamp Status Description
Lit Red Charging
Flashing Red
Abnormal ambient temperature,
USB-AC adaptor problem, or battery
problem (page 173)
Off Charging complete
Back lamp
19
Quick Start Basics
. To charge using a USB connection to a computer
USB connection lets you charge the battery while it is loaded in the camera.
While the camera is turned off, connect in the sequence shown below (
1
,
2
).
If the camera is on, press [ON/OFF] (Power) to turn it off before connecting it to
your computer.
IMPORTANT!
The first time you connect the camera to your computer with the USB cable, an
error message may appear on your computer. If this happens, disconnect and then
reconnect the USB cable.
A battery that has not been used for a long time, certain types of computers, and
connection conditions can cause charging to take more than approximately five
hours, which will trigger a timer that terminates charging automatically, even if the
battery is not fully charged. If this happens, disconnect and then reconnect the
USB cable to restart charging. To complete charging faster, use of the included
USB-AC adaptor is recommended.
If the battery has not been used for a very long time, charging may terminate
automatically and the back lamp may start flashing red or go out after only about
60 minutes. In either case, use of the USB-AC adaptor that comes with the camera
is recommended.
If you turn on the camera while charging over a USB connection to a computer is in
progress, the camera will establish a USB connection with the computer. Though
charging normally should continue at this time, certain types of computers or
connection environments may stop charging if supply power is low. This will be
indicated by the camera’s back lamp lighting green.
Charging is not performed while the connected computer is in the hibernate mode.
USB
2
1
Micro USB cable
(included with camera)
u mark of the small (micro USB) connector facing the lens side
of the camera.
[USB] port
USB port
Computer
(power turned on)
20
Quick Start Basics
Back Lamp Operation
The information in parentheses in the above table shows the lamp status while the
camera is turned on during charging.
Other Charging Precautions
With the two charging methods described above, you can charge the camera’s
battery (NP-130) without removing it from the camera. You also can charge the
battery using an optionally available charger unit (BC-130L). Never use any other
type of charger device. Attempting to use a different charger can result in
unexpected accident.
This model can be charged only via from USB 2.0 specification USB port only.
USB charging devices and power supply devices are subject to fixed standards.
Use of an inferior device or a device that is not up to standard can cause
malfunction and/or failure of your camera.
Operation is not guaranteed in the case of a computer built or modified by you.
Even in the case of a commercially available computer, certain USB port
specifications may make it impossible to charge via the USB cable.
A battery that is still warm immediately after normal use may not charge fully. Give
the battery time to cool before charging it.
A battery discharges slightly even when it is not loaded in the camera. Because of
this, it is recommended that you charge the battery immediately before you need to
use it.
Charging the camera’s battery may cause interference with TV and radio reception.
If this happens, plug the USB-AC adaptor into an outlet that is further away from
the TV or radio.
Actual charging time depends on current battery capacity and charging conditions.
Do not use the USB-AC adaptor with any other device.
Never use the power cord with another device.
Use only the USB-AC adaptor and USB cable specified in this manual for charging.
Use of any other type of devices may result in improper charging.
Lamp Status Description
Lit Red,
(Lit/Flashing Amber)
Charging
Flashing Red
Abnormal ambient temperature,
charging taking abnormally long, or
battery problem (page 173)
Off, (Lit Green) Charging complete
Back lamp
21
Quick Start Basics
Checking Remaining Battery Power
As battery power is consumed, a battery indicator on the monitor screen indicates
remaining power as shown below.
indicates battery power is low. Charge the battery as soon as possible.
Recording is not possible when is indicated. Charge the battery immediately.
The level shown by the battery indicator may change when you switch between the
REC mode and PLAY mode.
Leaving the camera for about 30 days with no power supplied while the battery is
dead will cause its date and time settings to be cleared. A message telling you to
configure time and date settings will appear the next time you turn on the camera
after restoring power. When this happens, configure date and time settings (page
160).
See page 194 for information about battery life and number of shots.
Battery Power Conservation Tips
Entering the “ECO Mode” enables low-power operation (page 153).
When you do not need to use the flash, select ? (Flash Off) for the flash setting
(page 47).
Enable the Auto Power Off and the Sleep features to protect against wasting
battery power when you forget to turn off the camera (pages 157, 157).
Select “Off” for “Continuous AF” (page 101).
The first time you load a battery into the camera, a screen appears for configuring the
display language, date, and time settings. Failure to set the date and time correctly
will cause the wrong date and time data to be recorded with images.
IMPORTANT!
A screen for language selection will not appear in step 2 of the procedure below if
you purchased a camera intended for the Japanese market. To change the display
language from Japanese in this case, use the procedure under “Specifying the
Display Language (Language)” (page 161). Note that a version of this manual in
the language you select may not be included with a camera intended for the
Japanese market.
Camera models sold in certain geographic areas may not support display language
selection.
Remaining Power High Low
Battery Indicator ***
Indicator Color White * White * Red * Red
Configuring Basic Settings the First Time You Turn On the
Camera
22
Quick Start Basics
1. Press [ON/OFF] (Power) to turn on the
camera.
2. Use [8], [2], [4], and [6] to select the
language you want and then press
[SET].
3. Use [8] and [2] to select a date style and then press [SET].
Example: July 10, 2015
YY/MM/DD
* 15/7/10
DD/MM/YY
* 10/7/15
MM/DD/YY
* 7/10/15
4. Set the date and the time.
Use [4] and [6] to select the setting you want to
change and then use [8] and [2] to change it.
To switch between 12-hour and 24-hour format, select
“24h” and then use [8] and [2] to change the setting.
5. After setting the date and time, use [4] and [6]
to select “Apply” and then press [SET].
NOTE
Each country controls its local time offset and the use of summer time, and so they
are subject to change.
Removing the battery from the camera too soon after configuring time and date
settings for the first time can cause the settings to be reset to their factory defaults.
Do not remove the battery for at least 24 hours after configuring settings.
If you make a mistake configuring display language, date, or time settings with the
above procedure, refer to the following pages for information about how to correct
the settings.
Display language: page 161
Date and time: page 160
[ON/OFF] (Power)
23
Quick Start Basics
Though the camera has built-in memory that can be used to store images and
movies, you probably will want to purchase a commercially available memory card for
greater capacity. The camera does not come with a memory card. Images recorded
while a memory card is loaded are saved to the memory card. When no memory card
is loaded, images are saved to built-in memory.
For information about memory card capacities, see page 188.
SD Memory Card
SDHC Memory Card
SDXC Memory Card
Use one of the above types of memory card.
The above are supported memory card types as of January 2013.
This camera supports use of SD memory cards of the following types and
capacities: SD memory cards up to 2GB, SDHC memory cards from 2GB up to
32GB, SDXC memory cards from 32GB up to 2TB. Note that the ability to use any
particular card with this camera, even if it satisfies the above capacity and type
requirements, is not guaranteed.
This camera supports use of Eye-Fi cards and FlashAir cards.
. Memory Card Handling Precautions
Certain types of cards can slow down processing speeds, and even can make it
impossible to store High Quality movies correctly. Also, use of certain types of
memory cards slows down data transfer and increases the time it takes to record
movie data, which can result in movie frames being dropped. The Y indicator on the
monitor screen turns yellow to indicate that frames are being dropped. In order to
avoid problems such as these, use of an Ultra High Speed Type SD memory card is
recommended. Note, however that CASIO makes no guarantees about the operation
of any Ultra High Speed Type SD memory card used with this camera.
Preparing a Memory Card
Supported Memory Cards
24
Quick Start Basics
1. Press [ON/OFF] (Power) to turn off
the camera and then open the
battery cover.
2. Load a memory card.
Positioning the memory card so its front
is facing upwards (towards the monitor
screen side of the camera), slide it into
the card slot all the way in until you hear
it click securely into place.
3. Close the battery cover.
IMPORTANT!
Never insert anything besides a supported memory card (page 23) into the memory
card slot.
Should water or any foreign object ever get into the card slot, immediately turn off
the camera, remove the battery, and contact your retailer or nearest CASIO
authorized service center.
To load a memory card
Front Back
Front
25
Quick Start Basics
To replace the memory card
Press the memory card and then release it.
This will cause it to pop out of the memory
card slot slightly. Pull the card out the rest
of the way and then insert another one.
Never remove a card from the camera
while the back lamp is flashing green.
Doing so can cause the image save
operation to fail and even damage the
memory card.
Format a memory card on the camera before using it for the first time.
IMPORTANT!
Formatting a memory card that already has snapshots or other files on it, will delete
its contents. Normally you do not need to format a memory card again. However, if
storing to a card has slowed down or if you notice any other abnormality, re-format
the card.
Be sure to use the camera to format a memory card. Formatting a card on a
computer will result in a non-SD standard format, which can greatly slow down
processing time and cause compatibility, performance, and other problems.
Before formatting a new Eye-Fi card to use it for the first time, copy the Eye-Fi
install file from the card to your computer.
Formatting a FlashAir card with the camera will delete files on the card that are
required for communication. For details about formatting, see the instructions that
come with the FlashAir card.
1. Turn on the camera and press [MENU].
2. Press [4], use [8] and [2] to select the “
¥
SETTING” tab, and then
press [6].
3. Use [8] and [2] to select “Format” and then press [SET].
4. Use [8] and [2] to select “Format” and then press [SET].
5. Use [8] and [2] to select “Yes” and then press [SET].
To format (initialize) a new memory card
26
Quick Start Basics
. To turn power on
Pressing [ON/OFF] (Power) enters the REC mode so
you can record images. Pressing [p] (PLAY) while
in the REC mode enters the PLAY mode, which you
can use to view snapshots and movies (pages 32,
109).
You also can turn on the camera by pressing [p]
(PLAY).
•Pressing [r] (REC) or the shutter button while in
the PLAY mode returns to the REC mode.
Take care to ensure that nothing is restricting or
coming into contact with the lens as it extends.
Holding the lens with your hand so it cannot
extend creates the risk of malfunction.
About 10 seconds after you press [p] (PLAY) to
enter the PLAY mode, the lens will retract into the
camera.
The Sleep function or Auto Power Off (pages 157,
157) will turn off power automatically if you do not
perform any operation for a preset amount of time.
. To turn off the camera
Press [ON/OFF] (Power).
NOTE
You also can configure the camera to turn on or off when you press [r] (REC)
(page 158).
The camera can be configured so power turns off when [p] (PLAY) is pressed
(page 158).
Turning the Camera On and Off
[p] (PLAY)
Back lamp
[ON/OFF] (Power)
[r] (REC)
Shutter button
27
Quick Start Basics
Your images will not come out
clearly if you move the camera
when you press the shutter
button. When pressing the
shutter button, be sure to hold
the camera as shown in the
illustration, and keep it still by
pressing your arms firmly
against your sides as you shoot.
Holding the camera still,
carefully press the shutter button
and take care to avoid all
movement as the shutter
releases and for a few moments after it releases. This is especially important when
available lighting is low, which slows down the shutter speed.
NOTE
Take care that your fingers and the strap do not
cover any of the areas indicated in the illustration.
To protect against accidentally dropping the
camera, attach the wrist strap and make sure it is
around your fingers or wrist while you are
operating the camera.
Never swing the camera around by its strap.
The supplied strap is intended for use with this
camera only. Never use it for any other purpose.
When the “Auto Rotate” setting is turned on, the
camera will detect whether it is being held
vertically or horizontally when a snapshot image is
shot. When you display an image shot with the camera held vertically, the image is
rotated automatically 90 degrees when displayed on the monitor screen (page
156).
Holding the Camera Correctly
Horizontal Vertical
Hold the camera so the flash is above the lens.
Front lamp
Lens
Flash
28
Quick Start Basics
You can select one of two auto recording modes (Program Auto or Premium Auto
Pro) according to your digital imaging needs.
1. Press [ON/OFF] (Power) to turn on the camera.
The camera will enter the REC mode.
If the camera is in the PLAY mode, press the shutter button.
2. Align the mode dial with [P] (Program Auto) or [Ÿ] (Premium Auto
Pro) to select Auto recording mode.
To shoot a snapshot
Selecting an Auto Recording Mode
Setting
REC Screen
Icon Display
Description
Program
Auto
This is the standard Auto recording mode.
Premium
Auto Pro
With Premium Auto Pro recording, the camera
automatically determines whether you are shooting a
subject or scenery, and other conditions. Premium
Auto Pro recording delivers higher image quality than
Program Auto recording.
It also requires more power (and runs down the
battery quicker) than Program Auto.
P
Ÿ
Auto recording mode icon
Shutter button
Mode dial
[ON/OFF] (Power)
Remaining Snapshot Memory
Capacity (page 188)
Monitor screen
29
Quick Start Basics
1. Point the camera at the subject.
If you are shooting with Premium Auto Pro, text will
appear at the bottom of the monitor screen describing the
type of shot the camera has detected.
You can zoom the image, if you want.
To shoot a snapshot
2. Half-press the shutter button to
focus the image.
When focus is complete, the camera
will beep, the back lamp will light
green, and the focus frame will turn
green.
When you half-press the shutter button, the
camera automatically adjusts exposure and
focuses on the subject it is currently pointed at.
Mastering how much pressure is required for a
half-press and a full-press of the shutter button
is an important technique for good-looking
images.
Appears when the
camera detects it is
stationary on a tripod.
w Wide Angle z Telephoto
Zoom controller
If the camera decides that it needs to shoot a series of images with Continuous Shutter
(CS), it will display “Š”. Take care to avoid any camera and subject movement until
shooting of all of the CS images is complete.
Focus frame
Back lamp
Half-press
Press lightly
until the
button stops.
Beep, beep (Image is in focus.)
30
Quick Start Basics
. If the image does not focus...
If the focus frame stays red and the back lamp is flashing green, it means that the
image is not in focus (because the subject is too close, etc.). Re-point the camera at
the subject and try to focus again.
. Shooting with Auto
If the subject is not in the center of the frame...
“Focus lock” (page 43) is the name of a technique you can use when you want to
shoot an image in which the subject to be focused on is not within the focus frame in
the center of the screen.
To track the movement of a moving subject
Half-press the shutter button to follow and focus automatically on a moving subject.
See “
O
Tracking” (page 99) for more information.
3. Continuing to keep the camera still,
press the shutter button the rest of
the way down.
This records the snapshot.
Recording a Movie
Press [0] (Movie) to start movie recording. Press
[0] (Movie) again to stop movie recording. See the
following pages for details.
Standard movie (STD movie): page 64
High-definition movie (FHD movie): page 67
High speed movie (HS movie): page 67
Full-press
Snap (Image is recorded.)
[0] (Movie)
31
Quick Start Basics
. Shooting with Premium Auto Pro
In addition to shutter speed, aperture, and ISO sensitivity, the camera
automatically executes the following operation as required when shooting with
Premium Auto Pro.
Continuous AF (page 101)
Intelligent AF (page 99)
Face Detection (page 102)
High Speed Anti Shake (page 87)
Shooting with Premium Auto Pro can cause vibration and noise to occur due to
lens operation. This does not indicate malfunction.
When Shooting with Premium Auto Pro, the message “Processing Premium Auto.”
may appear on the monitor screen. If you feel the camera is taking too long to
process data, try shooting with standard Auto instead.
In some cases, Premium Auto Pro may not be able to interpret the shooting
environment correctly. If this happens, shoot with standard Auto.
If “Š” is displayed, the camera will shoot a series of CS images and merge them
into a final image. Take care to avoid any camera and subject movement until
shooting of all of the CS images is complete. If you do not want to shoot CS
images, select “Off” for the Control Panel (page 38) “HS Scene Shooting” item.
Certain flash settings (page 47) can limit environmental factors detectable by
Premium Auto Pro.
32
Quick Start Basics
Use the following procedure to view snapshots on the camera’s monitor screen.
For information about how to play back movies, see page 109.
For information about images recorded using continuous shutter (CS), see page
111.
1. Turn on the camera and press
[p] (PLAY) to enter the PLAY
mode.
This will display one of the snapshots
currently stored in memory.
Information about the displayed
snapshot also is included (page 12).
You also can clear the information to
view only the snapshot (page 13).
You can zoom in on the image by rotating the zoom controller towards z
(page 115). If you are recording a snapshot that is very important to you, it is
recommended that you zoom the image and check its details after recording it.
2. Use [4] and [6] to scroll between images.
Holding down either button scrolls at high speed.
NOTE
Half-pressing the shutter button while in the PLAY mode or while a menu screen is
displayed will switch directly to the REC mode.
Viewing Snapshots
[p] (PLAY)
[6]
[6]
[4]
[4]
33
Quick Start Basics
If memory becomes full, you can delete snapshots and movies you no longer need in
order to free up storage and record more images.
IMPORTANT!
Remember that a file (image) delete operation cannot be undone.
For information about images recorded using continuous shutter (CS), see page
112.
If you select “Disabled” for the “Delete Key” setting on the “
¥
SETTING” menu
(page 158), the delete menu will not appear when you press [2] ( ) (Delete).
You can delete files only while “Enabled” is selected for “Delete Key”.
. To delete a single file
1. Press [p] (PLAY) to enter the PLAY mode and then
press [2] ( ).
2. Use [4] and [6] to scroll through the files until the one
you want to delete is displayed.
3. Use [8] and [2] to select “Delete” and then press [SET].
To delete other files, repeat steps 2 and 3.
To exit the delete operation, press [MENU].
If a CS group (page 111) is displayed when you perform the above procedure,
all of the images in the currently displayed CS group will be deleted.
. To delete specific files
1. Press [p] (PLAY) to enter the PLAY mode and then press [2] ( ).
2. Use [8] and [2] to select “Delete Files” and then press [SET].
This displays a file selection screen.
3. Use [8], [2], [4], and [6] to move the selection boundary to the file
you want to delete, and then press [SET].
This will select the check box in the lower left corner of the selected file’s image
and move the blue boundary to the next image.
You can enlarge the selected image before deleting it by rotating the zoom
controller towards z ([).
4. Repeat step 3 to select other files, if you want. After you are finished
selecting files, press [MENU].
5. Use [8] and [2] to select “Yes” and then press [SET].
This deletes the files you selected.
To cancel the delete operation, select “No” in step 5 and then press [SET].
Deleting Snapshots and Movies
34
Quick Start Basics
. To delete all files
1. Press [p] (PLAY) to enter the PLAY mode and then press [2] ( ).
2. Use [8] and [2] to select “Delete All Files” and then press [SET].
3. Use [8] and [2] to select “Yes” and then press [SET] to delete all files.
This will cause the message “There are no files.” to appear.
Operation
Never open the battery cover while the back lamp is flashing green. Doing so can
result in the image you just shot being saved incorrectly, damage to other images
stored in memory, malfunction of the camera, etc.
If unwanted light is shining onto the lens, shade the lens with your hand when
shooting an image.
Monitor Screen when Shooting Snapshots
Subject brightness conditions can cause monitor screen response to slow and can
cause digital noise in the monitor screen image.
The image that appears on the monitor screen is for image composition. The actual
image will be recorded at the quality set for the image quality setting (page 96).
Shooting Indoors under Fluorescent Lighting
Minute flickering of fluorescent lighting can affect the brightness or color of an
image.
Other Precautions
The slower the shutter speed, the greater the possibility that noticeable noise will
be generated in an image. Because of this, the camera automatically performs a
noise reduction at slow shutter speeds. The noise reduction process causes it to
take longer to record images at lower shutter speeds. The shutter speeds for which
noise reduction is performed depend on the camera setup and shooting conditions.
A noise reduction process is performed when ISO sensitivity is set to a high value.
This can cause the camera to take relatively longer to be ready to shoot again after
you press the shutter button. Do not perform any key operation while the image
recording operation is in progress.
Due to the characteristics of the imaging element used by the camera, very fast
moving objects in an image may appear distorted.
Snapshot Shooting Precautions
35
Quick Start Basics
. Auto Focus Restrictions
Any of the following can make proper focus impossible.
Solid color wall or other very low contrast subject
Strongly back lit subject
Very shiny subject
Blinds or other subject with a repeating horizontal pattern
Multiple subjects at varying distances from the camera
Subject in a dark location
Subject that is too far away for light from the AF assist light to reach
Camera movement while shooting
Fast-moving subject
Subjects outside the focus range of the camera
If you cannot focus properly, try using focus lock (page 43) or Manual Focus (page
42).
36
Snapshot Tutorial
Snapshot Tutorial
Your camera has a variety of different recording
modes. Before recording an image, rotate the mode
dial to select the recording mode that suits the type
of image you are trying to record.
Selecting the Recording Mode
PProgram Auto
Standard Auto recording mode. This is the mode you normally should use
(page 28).
Ÿ Premium Auto Pro
With Premium Auto Pro recording, the camera automatically determines
whether you are shooting a subject or scenery, and other conditions. Premium
Auto Pro recording delivers higher image quality than standard Auto recording
(page 28).
BEST SHOT
Simply select one of a collection of built-in sample scenes and the camera sets
up automatically for beautiful images every time (page 73).
E Focus Control
You can use Focus Control to configure the camera so the background is
blurred and only the foreground subject is in focus (Blurred Background), or so
everything is in focus (All-In-Focus Macro) (page 58).
ART SHOT
A variety of artistic effects help to make even common, ordinary subjects
become more novel and exciting.
Multi SR Zoom
This feature uses super resolution technology and multiple Continuous Shutter
(CS) images to expand the zoom range for overall images of higher quality and
clarity (page 54).
D Triple Shot
Shoots a burst of three images, making this feature is great for capturing all
those special moments when kids are around (page 63).
Mode dial
b
C
j
37
Snapshot Tutorial
IMPORTANT!
In the S mode, ISO sensitivity (page 44) always operates according to its “Auto”
setting. The ISO sensitivity setting cannot be changed while in the S mode.
The flash > (Auto Flash) and ¥ (Red Eye Reduction) flash modes are not
supported while A, S, or M is selected for the recording mode. If you want the flash
to fire, select < (Flash On) as the flash mode.
The displayed ISO sensitivity, shutter speed or aperture value will turn red when
you half-press the shutter button if the image is overexposed or underexposed.
M M (Manual Exposure) mode
This mode gives you total control over aperture and shutter speed settings.
1
Press [SET] to open the Control Panel.
2
Use [8] and [2] to select
A
(Aperture), and then press [SET].
3
Use [8] and [2] to change the aperture setting, and then press [SET].
4
Use [8] and [2] to select
S
(Shutter Speed), and then press [SET].
5
Use [8] and [2] to change the shutter speed setting, and then press [SET].
S S (Shutter Speed Priority) mode
In this mode, you select the shutter speed and other settings are adjusted
accordingly.
1
Press [SET] to open the Control Panel.
2
Use [8] and [2] to select
S
(Shutter Speed), and then press [SET].
3
Use [8] and [2] to change the shutter speed setting, and then press [SET].
You also can select the EV shift setting located under the shutter speed
setting and then specify an exposure value (EV shift), if you want.
A A (Aperture Priority) mode
In this mode, you select the aperture and other settings are adjusted
accordingly.
1
Press [SET] to open the Control Panel.
2
Use [8] and [2] to select
A
(Aperture), and then press [SET].
3
Use [8] and [2] to change the aperture setting, and then press [SET].
You also can select the EV shift setting located under the aperture setting
and then specify an exposure value (EV shift), if you want.
38
Snapshot Tutorial
2. Use [8] and [2] to select the setting you want to change, and then
press [SET].
This will select one of the Control Panel icons and display its settings.*
3. Use [8] and [2] to change the setting.
4. After the setting is the way you want, press
[SET].
This will apply the setting and return to the REC
mode.
NOTE
You also can use on-screen menus to configure settings other than those listed
above (page 91).
Using the Control Panel
The Control Panel can be used to configure camera
settings.
1. In the REC mode, press [SET].
You can also display the Control Panel by
pressing [2].
1
Self-timer (page 39)
2
White balance (page 40)
3
Focus (page 42)
4
ISO sensitivity (page 44)
5
Make-up Level (page 45)
6
EV shift (page 46)
7
Flash (page 47)
8
Metering (page 49)
* Items displayed in the Control Panel depend on the recording mode.
[SET]
[8] [2] [4] [6]
1
5
3
4
7
8
2
6
Control Panel
39
Snapshot Tutorial
With the Self-timer, pressing the shutter button starts a timer. The shutter is released
and the image is shot after a fixed amount of time.
1. In the REC mode, press [SET].
2. Use [8] and [2] to select the (Self-timer) Control Panel option, and
then press [SET].
3. Use [8] and [2] to select the setting you want and then press [SET].
The front lamp flashes while the Self-timer countdown is
in progress.
You can interrupt an ongoing Self-timer countdown by
pressing [SET].
Using the Self-timer (Self-timer)
Setting
REC Screen
Icon Display
Description
10 sec 10-second Self-timer
2 sec
2-second Self-timer
When shooting under conditions that slow
down the shutter speed, you can use this
setting to prevent image blur due to camera
movement.
×3
(Triple Self-
timer)
Shoots three images: one image 10 seconds
after the shutter button is pressed, and the next
two images as soon as the camera is ready
after shooting the previous image. How long it
takes for the camera to get ready to shoot
depends on the image size and quality settings,
whether or not a memory card is loaded in the
camera, and the flash charge condition.
Off None Turns off the Self-timer.
Front lamp
40
Snapshot Tutorial
NOTE
The Self-timer cannot be used together with the following features.
High Speed CS with Prerecord CS, Prerecord (Movie), Lag Correction,
Slide Panorama, Wide Shot, Triple Shot
The Triple Self-timer cannot be used together with the following features.
Movie, High Speed CS, Multi SR Zoom, High Speed Night Shot, High Speed Best
Selection, For YouTube, Blurred Background, All-In-Focus Macro
You can adjust white balance to match the source of light available where you are
shooting and avoid the blue cast that results when shooting outdoors when it is
cloudy, and the green cast that results when shooting under fluorescent lighting.
1. In the REC mode, press [SET].
2. Use [8] and [2] to select the (White Balance) Control Panel option,
and then press [SET].
3. Use [8] and [2] to select the shooting condition you want and then
press [SET].
Adjusting White Balance (White Balance)
Setting
REC Screen
Icon Display
Description
Auto WB None
Configures the camera to adjust white balance
automatically.
Daylight For shooting outdoors on a clear day
Overcast
For shooting outdoors on an overcast rainy day,
in the shade, etc.
Shade
For shooting on a clear day in the shade of trees
or buildings
DayWhite
Fluorescent
For shooting under white or day white
fluorescent lighting
Daylight
Fluorescent
For shooting under daylight fluorescent lighting
Tungsten For shooting under light bulb lighting
¤
'
«
41
Snapshot Tutorial
When “
Auto WB” is selected for the white balance setting, the camera
automatically determines the white point of the subject. Certain subject colors
and light source conditions can cause problems when the camera tries to
determine the white point, which makes proper white balance adjustment
impossible. If this happens, select the white balance setting that matches your
shooting conditions (Daylight, Overcast, etc.).
Manual
WB
For configuring the camera manually to suit a
particular light source
1
Select “Manual WB”.
2
Under the lighting
conditions you plan to
use when shooting, point
the camera at a blank
white piece of paper so it
fills the entire monitor
screen and then press
the shutter button.
3
Press [SET].
The white balance setting is retained even if you
turn off the camera.
Setting
REC Screen
Icon Display
Description
·
Blank white paper
42
Snapshot Tutorial
1. In the REC mode, press [SET].
2. Use [8] and [2] to select the (Focus) Control Panel option, and
then press [SET].
3. Use [8] and [2] to select the setting you want and then press [SET].
*1
The focus range is the distance from the lens surface.
*2 The focus range depends on the current optical zoom position.
*3 During High Speed Movie recording, focus is fixed at the position where it was
when recording started. To focus an image, half-press the shutter button for Auto
Focus or focus manually before you press [0] (Movie) to start recording.
To focus with manual focus
1. On the monitor screen, compose the image so
the subject you want to focus on is within the
yellow boundary.
2. Watching the image on the monitor screen use
[4] (nearer) and [6] (further) to adjust focus.
At this time the image that is within the boundary
will enlarge and fill the monitor screen, which aids
in focusing. If you do not perform any operation for
two seconds while the enlarged image is displayed,
the screen in step 1 will re-appear.
When the “Control Dial” (page 92) is set to “MF” (Manual Focus), you can use
the control dial for focusing.
Selecting a Focus Mode (Focus)
Settings
REC Screen
Icon Display
Type of Shot
Focus Mode Approximate Focus Range
*
1
Snapshot Movies Snapshot Movies
Q
AF
(Auto
Focus)
None
General
recording
Automatic Automatic
*
3
4 cm to
9
(infinity)
(1.6" to
9
) (Wide Angle)
*
2
´
Macro
Close ups
4 cm to 50 cm
(1.6" to 19.7")
(Wide Angle)
*
2
W
MF
(Manual
Focus)
When you
want to focus
manually
Manual
4 cm to
9
(infinity)
(1.6" to
9
) (Wide Angle)
*
2
Yellow boundary
43
Snapshot Tutorial
NOTE
An Auto Macro feature detects how far the subject is from the lens and
automatically selects either Macro Focus or Auto Focus accordingly.
Use of the flash together with Macro Focus can cause the light of the flash to
become blocked, which may result in unwanted lens shadows in your image.
Whenever you perform an optical zoom operation while shooting with Auto Focus,
Macro Focus, or Manual Focus, a value will appear on the monitor screen to tell
you the focus range, as shown below. Note that the focus range is displayed
including the Auto Macro range only when shooting with Auto Focus.
Example: oo
* cm - 9
* oo is the actual focusing range value.
The operations assigned to the [4] and [6] keys with the “L/R Key” setting (page
93) are disabled while Manual Focus is selected as the focus mode.
The “Focus” setting is always fixed at “AF” (Auto Focus) whenever “Face
Detection” is being used. If you want to change the “Focus” setting, first select “Off”
for “Face Detection”.
Using Focus Lock
“Focus lock” is a technique you can use when you want to
compose an image in which the subject you want to focus
on is not within the focus frame in the center of the
screen.
To use focus lock, select “U Spot” or “O Tracking” for
the Auto Focus area (page 99).
1. Align the monitor screen’s focus frame with
the subject you want to focus on and then half-
press the shutter button.
2. Keeping the shutter button half-pressed
(which maintains the focus setting), move the
camera to compose the image.
When “O Tracking” is selected as the Auto Focus
area, the focus frame will move automatically and
follow the subject.
3. When you are ready to shoot the image, press the shutter button the
rest of the way down.
NOTE
Focus lock also locks exposure (AE).
Subject to be focused on
Focus frame
44
Snapshot Tutorial
ISO sensitivity is a measure of sensitivity to light.
1. In the REC mode, press [SET].
2. Use [8] and [2] to select the (ISO Sensitivity) Control Panel option,
and then press [SET].
3. Use [8] and [2] to select the setting you want and then press [SET].
While “Auto” is selected, Anti Shake corrects for subject movement only (page
100).
Since higher ISO sensitivity values tend to result in digital noise in images, the
camera performs a noise filtering process. Because of this, it may take
relatively longer for the camera to finish recording an image after it is shot. You
will not be able to perform any key operation while image recording is in
progress.
Specifying ISO Sensitivity (ISO)
Setting
REC Screen
Icon Display
Description
Auto None
Adjusts sensitivity automatically according to
conditions.
ISO80
Lower
sensitivity
Higher
sensitivity
Slow shutter speed
Fast shutter speed
(Set for shooting in
dimly lit areas.)
Less noise
Some coarseness
(increased digital
noise)
ISO100
ISO200
ISO400
ISO800
ISO1600
ISO3200
45
Snapshot Tutorial
The Make-up Function smoothes the skin texture of the subject and softens facial
shadows caused by harsh sunlight for better looking portraits. You can select a make-
up level within the range of “0 (Off)” to “+12 (Max.)”.
1. Enter the REC mode, and then press [SET].
2. Use [8] and [2] to select the (Make-up Level) Control Panel option,
and then press [SET].
3. Use [8] and [2] to select the Make-up Level setting you want, and then
press [SET].
You can select a make-up level within the range of “0 (Off)” to “+12 (Max.)”.
4. Shoot the image.
NOTE
Selecting any Make-up Level setting from +1 (Min.) to +12 (Max.) causes the
settings below to be configured automatically.
Face Detection: On
Focus Mode: AF (Auto Focus)
Make-up cannot be used with the following functions.
Some BEST SHOT scenes, ART SHOT, Multi SR Zoom, High Speed CS
Recording Beautiful Portraits (Make-up Level)
46
Snapshot Tutorial
You can manually adjust an image’s exposure value (EV value) before shooting it.
Exposure Compensation Range: –2.0 EV to +2.0 EV
Unit: 1/3EV
1. In the REC mode, press [SET].
2. Use [8] and [2] to select the (EV Shift) Control Panel option, and
then press [SET].
3. Use [8] and [2] to adjust the exposure compensation value.
4. Press [SET].
This applies the exposure compensation value. The exposure compensation
value you set remains in effect until you change it or turn off the camera (which
causes it to revert to “0.0”).
NOTE
When shooting under very dark or very bright conditions, you may not be able to
obtain satisfactory results even after performing exposure compensation.
Correcting Image Brightness (EV Shift)
[8], clockwise:
Increases the EV value. A higher EV value is
best for light-colored subjects and backlit
subjects.
[2], counterclockwise:
Decreases the EV value. A lower EV value is
best for dark-color subjects and for shooting
outdoors on a clear day.
To cancel exposure compensation, change the EV value to 0.0.
Exposure compensation value
47
Snapshot Tutorial
If you plan to use flash, you need to slide the flash switch
to open the flash unit.
1. In the REC mode, press [2] ( ) once.
2. Use [8] and [2] to select the flash setting
you want and then press [SET].
3. Slide the flash switch to open the flash unit.
If you half-press the shutter button while the flash unit is not open when
surrounding light requires flash, the message “Open the flash unit.” will appear
on the monitor screen. The flash will not fire if you go on and fully press the
shutter button. Slide the flash switch to open the flash unit before shooting.
Using Flash (Flash)
Setting
REC Screen
Icon Display
Description
Auto Flash None
Flash fires automatically in accordance with
exposure (amount of light and brightness)
conditions.
Flash Off Flash does not fire.
Flash On
Flash always fires. This setting can be used to
brighten a subject that normally comes out dark
due to daylight or backlight (daylight synchro
flash).
Red Eye
Reduction
Flash fires automatically. This type of flash can
be used to reduce the chance of redness in the
subject’s eyes.
Flash
Flash switch
[2] ( )
48
Snapshot Tutorial
4. Press the shutter button to shoot.
For information about Flash Range, see page 193.
IMPORTANT!
Even if you have the Control Panel setting configure for flash, the flash will not fire
unless the flash unit is open.
When not using flash, press down on the flash unit until it locks into place with a
click.
Foreign matter on the flash window can react with the light of the flash, producing
some smoke and abnormal odor. Though this does not indicate malfunction, oil
from your fingers and other foreign matter when left on the flash window can
become difficult to clean off later. Because of this, you should make it a regular
habit to wipe the window clean regularly with a soft, dry cloth.
NOTE
Take care so your fingers and the strap do not block the flash.
The desired effect may not be obtained when the subject is too far away or too
close.
Flash charging time (page 193) depends on operating conditions (battery
condition, ambient temperature, etc.).
Shooting with flash turned off when lighting is dim results in a slow shutter speed,
which can cause image blur due to camera movement. Under such conditions,
secure the camera with a tripod, etc.
With red eye reduction, the flash is fired automatically in accordance with
exposure. It does not fire in areas where lighting is bright.
The presence of outdoor sunlight, fluorescent lighting, or some other light source
can cause abnormal image colors.
Select ? (Flash Off) for the flash setting when shooting in areas where flash
photography is prohibited.
The flash > (Auto Flash) and ¥ (Red Eye Reduction) flash modes are not
supported while A, S, or M is selected for the recording mode. If you want the flash
to fire, select < (Flash On) as the flash mode.
Back lamp
Flashes orange while the flash is charging to
indicate that image recording is disabled.
You will not be able to take another flash
snapshot until the lamp stops flashing orange,
which indicates that charging is complete.
< indicates the flash will fire.
49
Snapshot Tutorial
Red-eye Reduction
Using the flash to shoot at night or in a dimly lit room can cause red spots inside the
eyes of people who are in the image. This is caused when the light from the flash
reflects off of the retina of the eye. When red-eye reduction is selected as the flash
mode, the camera fires a pre-flash to cause the irises in the eyes of any people in the
image to close, which reduces the chance of red eye.
Note the following important points when using red-eye reduction.
Red-eye reduction does not work unless the people in the image are looking
directly at the camera (flash).
Red-eye reduction may not work very well if the subjects are located far away from
the camera.
The metering mode determines what part of the subject is metered for exposure.
1. In the REC mode, press [SET].
2. Use [8] and [2] to select the (Metering) Control Panel option, and
then press [SET].
3. Use [8] and [2] to select the setting you want and then press [SET].
Specifying the Metering Mode (Metering)
Setting
REC Screen
Icon Display
Description
Multi None
Multi-pattern metering divides the image into
sections and measures the light in each section for
a balanced exposure reading. This type of
metering provides error-free exposure settings for
a wide range of shooting conditions.
Center
Weighted
Center weighted metering concentrates on the
center of the focus area to measure light. This type
of metering is best when you want some level of
control over contrast.
Spot
Spot metering takes readings at a very small area.
Use this metering method when you want
exposure to be set according to the brightness of a
particular subject, without being affected by
surrounding conditions.
B
N
˜
50
Snapshot Tutorial
Your camera is equipped with various types of zoom: optical zoom, HD Zoom, Single
SR Zoom, Multi SR Zoom, and digital zoom. The maximum zoom factor depends on
the image size setting and the digital zoom on/off settings.
1. In the REC mode, rotate the zoom controller to zoom.
2. Press the shutter button to shoot.
NOTE
Use of a tripod is recommended to protect against image blur due to camera
movement when shooting with telephoto.
Performing a zoom operation changes the lens aperture.
Zoom operations are supported during movie recording. Zoom operations are
disabled during high speed movie recording. To use zoom, perform the zoom
operation before you press [0] (Movie) to start recording.
Zoom operations are not supported while shooting with the following feature. The
zoom setting is fixed at full wide angle.
Slide Panorama, Wide Shot, All-In-Focus Macro
Shooting with Zoom
Optical zoom
Zooming is performed by changing the lens focal distance, so
there is no deterioration of image quality.
HD Zoom
Allows greater zoom capabilities by cutting out a portion of the
original image and enlarging it, without deterioration of image
quality.
Single SR Zoom
Applies super resolution technology to suppress image
deterioration (page 53).
Multi SR Zoom
Shoots a burst of high-speed images, which are then combined
into a final image in a way that lessens deterioration of image
quality. Multi SR Zoom is enabled only when the “Multi SR
Zoom” recording mode is selected. (page 54)
Digital zoom
A digital process is used to enlarge the center of the image, so
there is deterioration of image quality.
w (Wide Angle): Reduces the size of the subject and broadens the range.
z (Telephoto) : Enlarges the subject and narrows the range.
w Wide Angle z Telephoto
Zoom controller
51
Snapshot Tutorial
A variety of information is shown on the monitor screen while a zoom operation is in
progress.
. Zoom Mode Icons
The table below shows what appears on the monitor screen based on the zoom
mode.
Monitor Screen Information when Zooming
Zoom mode REC Screen Icon Display
Optical zoom None
HD Zoom None
Single SR Zoom ¨ (White)
Multi SR Zoom ¸ (Black)
Digital zoom ê
Focusing Range
(Displayed for Auto Focus,
Macro Focus, and Manual
Focus.)
Focal distance
(Converted to 35 mm film
format.)
Image quality limit
(Deterioration starts from
here.)
Zoom bar
Zoom mode
52
Snapshot Tutorial
. Interpreting the Zoom Bar
During a zoom operation, a zoom bar appears on the monitor screen to show the
current zoom setting.
. Zoom Factor
The digital zoom factor depends on the image size (page 94), the super resolution
zoom setting, and on whether or not “Multi SR Zoom” is selected (page 54).
Multi SR Zoom is enabled only when the “Multi SR Zoom” recording mode is
selected.
Image size
Optical
zoom
Maximum zoom factor where image
deterioration can be suppressed
Total maximum
zoom factor
(In combination
with digital zoom)
Zoom (SR): Off
(HD Zoom)
Multi SR Zoom
Zoom (SR): Single
16M 18.0X 18.0X 36.0X 72.0X
3:2 18.0X 18.0X 36.0X 72.0X
16:9 18.0X 18.0X 36.0X 72.0X
10M 18.0X 22.7X 45.5X 90.9X
5M 18.0X 32.4X 64.8X 129.6X
3M 18.0X 40.5X 81.0X 161.6X
VGA 18.0X 129.6X 258.7X 286.9X
Range where image deterioration is
suppressed.
Wide Angle Telephoto
Zoom pointer
(Indicates current zoom.)
Point from which image deteriorates
The location of this point depends on the image size, the “Zoom (SR)
setting, and whether Multi SR Zoom is enabled.
Optical zoom limit point
Deteriorated image range
53
Snapshot Tutorial
There are two types of Super Resolution Zoom: Single SR Zoom and Multi SR Zoom.
Single SR Zoom uses super resolution to expand the zoom range in which image
quality deterioration is minimized. Multi SR Zoom shoots a series of High Speed CS
images, which are then combined into an image that enables shooting at higher zoom
ratios without loss of image quality. For information about the effective zoom factor
ranges in which Super Resolution Zoom is effective, see page 52.
The procedure below shows how to configure Single SR Zoom settings. For
information about Multi SR Zoom, see page 54.
1. In the REC mode, press [MENU].
2. Press [4], use [8] and [2] to select the “
r
REC MENU” tab, and then
press [6].
3. Use [8] and [2] to select “Zoom (SR)” and then press [SET].
4. Use [8] and [2] to select “Single” and then press [SET].
NOTE
Single SR Zoom is effective when you want to capture delicate textures.
Single SR Zoom does not work during movie recording.
The following functions are disabled when shooting with Single SR Zoom.
Triple Self-timer, ART SHOT, Multi SR Zoom, Triple Shot, some BEST SHOT
scenes
Zooming with Super Resolution (Zoom (SR))
54
Snapshot Tutorial
This feature uses super resolution technology and multiple Continuous Shutter (CS)
images to expand the zoom range for overall images of higher quality and clarity
(page 53).
1. Align the mode dial with [j] (Multi SR Zoom).
2. Press the shutter button to shoot.
NOTE
Multi SR Zoom is effective when you want to capture delicate textures.
The following functions are disabled when shooting with Multi SR Zoom.
Single SR Zoom, Triple Self-time, Sharpness, Contrast
With Multi SR Zoom, the flash setting automatically becomes ? (Flash Off).
Shooting with this function automatically sets Anti Shake to “Standard” (page 100),
but large movement of the camera or subject make it impossible to achieve the
desired shot.
Depending on shooting conditions and image composition, Multi SR Zoom may not
be able to produce the desired result.
When shooting with this feature, “ISO 3200” cannot be selected for “ISO
Sensitivity” (page 44).
Expanding the Zoom Range to Shoot Clearer Snapshots
(Multi SR Zoom)
Shooting a Burst of Images (High Speed CS)
Pressing [Õ] (Continuous Shutter) toggles
between the Continuous Shutter mode and the
Single Shot mode (page 28).
[Õ] (Continuous Shutter)
55
Snapshot Tutorial
. Shooting with High Speed CS
With High Speed CS, recording continues as long as you
keep the shutter button depressed.
The table below shows the settings that can be specified
for the CS speed and the number of images per High
Speed CS operation.
1. Align the mode dial with [P] (Program Auto).
2. Press [Õ] (Continuous Shutter).
This will display Š (High Speed CS). If this does not happen, press [Õ]
again.
3. Press [SET].
4. Use [8] and [2] to select the (High Speed CS fps) Control Panel
option, and then press [SET].
5. Use [8] and [2] to select the continuous shutter (CS) speed you want,
and then press [4].
Use a higher “High Speed CS fps” setting when shooting a fast-moving subject.
6. Use [8] and [2] to select the (Maximum CS Shots) Control Panel
option, and then press [SET].
7. Use [8] and [2] to select the maximum number of shots and then
press [SET].
8. Press the shutter button the rest of the way and hold it down.
Shooting of images will continue as long as you depress the shutter button or until
the maximum number of images specified by “High Speed CS fps” is reached.
CS Speed
(High Speed CS
(fps))
3 fps, 5 fps, 10 fps, 15 fps, 30 fps
fps = frames per second
Maximum CS
Shots
5, 10, 20, 30
Maximum CS shots
CS speed
High Speed CS icon
56
Snapshot Tutorial
. Shooting with Prerecord CS
Half-pressing and holding the shutter button causes a pre-record buffer to be
continually updated with images. When the shutter button is fully pressed, buffer
contents are recorded along with a series of real-time images. Use Prerecord CS
when you want to make sure you do not miss fast-moving action.
1. Align the mode dial with [P] (Program Auto).
2. Press [Õ] (Continuous Shutter).
3. Press [SET].
4. Use [8] and [2] to select the (High Speed CS fps) Control Panel
option, and then press [SET].
5. Use [8] and [2] to select the continuous shutter (CS) speed you want,
and then press [4].
Use a higher “High Speed CS fps” setting when shooting a fast-moving subject.
6. Use [8] and [2] to select the (Maximum CS Shots) Control Panel
option, and then press [SET].
7. Use [8] and [2] to select the maximum number of shots, and then
press [4].
8. Use [8] and [2] to select the (Pre-record CS Shots) Control Panel
option, and then press [SET].
9. Use [8] and [2] to select the number of Prerecord (Still) images and
then press [SET].
Settings: 0 shots, 3 shots, 5 shots, 10 shots, 15 shots, 20 shots, 25 shots
If you select “0 shots”, no pre-record images will be stored when you half-press
the shutter button.
Shutter button
half-press
Recorded images (up to 30 images)
Pre-recorded images
Shutter button
full-press
Shutter button
release
Continuous recording of images until shutter
button released
57
Snapshot Tutorial
10.
Half-press and hold the shutter button to start pre-recording.
A pre-record buffer is continually updated with images as long as the shutter
button is pressed.
The camera will not emit shutter sounds as it pre-records images.
Releasing the half-pressed shutter button will cause the contents of the pre-
record buffer to be deleted.
11.
Full press and hold down the shutter button.
This will record the images in the pre-record buffer followed by real-time recorded
images. Shooting of images will continue as long as you depress the shutter or
until the maximum number of images specified by “High Speed CS fps” is
reached.
. Continuous Shutter Precautions
You can use the Manual Mode while a continuous shutter mode is selected. To do
so, set the mode dial to [A], [S], or [M].
The greater the number of shots, the longer it takes to save them after shooting is
complete.
When using a continuous shutter mode, keep the camera still until shooting is
finished.
Zoom is disabled during continuous shutter operations.
When shooting with this function, the snapshot image quality automatically
changes to “Normal”.
When shooting with this function, exposure and focus for the first image are applied
for successive images as well.
When shooting with this function, the flash setting automatically becomes
? (Flash Off).
The following image sizes cannot be selected while shooting with this function:
“3:2”, “16:9”. Entering the High Speed CS mode while any one of these image
sizes is selected will cause the image size setting to change to “16M”
automatically.
The Triple Self-time cannot be used when shooting with this function.
The Self-timer cannot be used in the Prerecord CS mode.
Single SR Zoom and Multi SR Zoom cannot be used when shooting with this
function.
58
Snapshot Tutorial
You can use Focus Control to configure the camera so the background is blurred and
only the foreground subject is in focus (Blurred Background), or so everything is in
focus (All-In-Focus Macro).
This function analyzes a burst of consecutive images and then blurs the background
behind the main subject. This creates an effect that really makes the subject stand
out, just like photographs taken with a single-lens reflex camera. The blur effect can
be set to one of three levels.
1. Align the mode dial with [E] (Focus Control).
2. Press [SET].
3. Use [8] and [2] to select , and then press [SET].
4. Use [4] and [6] to select “Blurred Background” and then press [SET].
5. Press [SET] and then use [8] and [2] to select the (Blur Effect)
Control Panel option, and then press [SET].
6. Use [8] and [2] to select the Image Blur level you want, and then
press [SET].
The Image Blur level can be set to Level 1, Level 2, or Level 3.
7. Press the shutter button to shoot.
Get as close as possible to the subject. Also, the background should be as far
away as possible from the subject. The required distances depend on the
zoom factor being used.
This will cause the message “Busy... Please wait...” to appear. Do not move
the camera while this message is displayed. The recording process takes
some time to complete after the message appears.
Using Focus Control
Shooting with a Blurred Background (Blurred Background)
Shot with “Program Auto”. Shot with “Blurred Background”.
Example: When zoom is set to full wide (W), the distance between the camera
and subject should be 30cm, while the distance between the subject
and background should be at least 1 meter.
59
Snapshot Tutorial
NOTE
The current “Zoom (SR)” (page 53) setting is ignored when shooting with this
function.
With this function, the flash setting automatically becomes ? (Flash Off).
Shooting with this function automatically sets Anti Shake to “Standard” (page 100),
but large movement of the camera or subject make it impossible to achieve the
desired shot.
Depending on the shooting environment, image composition, and subject, this
scene may not be able to produce the desired result.
If the camera determines that it is unable to blur the background of an image for
some reason, it will display the message “Blurring failed. Normal background
recorded.”. Note, however, that the image will be saved, even if background
blurring is not possible.
All-In-Focus Macro shoots and analyzes a burst of multiple images and combines
them in a way that produces an image in which everything is in focus: from nearby
objects to distant objects.
1. Align the mode dial with [E] (Focus Control).
2. Press [SET].
3. Use [8] and [2] to select , and then press [SET].
4. Use [4] and [6] to select “All-In-Focus Macro” and then press [SET].
5. Press the shutter button to shoot.
Move the camera as close to the subject as possible, and take care to avoid
camera movement and subject movement as you shoot.
After you press the shutter button, the message “Busy... Please wait...” will
appear on the monitor screen to let you know that shooting is in progress. Do
not move the camera while this message is displayed. The recording process
takes some time to complete after the message appears. Image shooting is
disabled while the message is displayed.
Shooting with Full Focus Macro (All-In-Focus Macro)
“Program Auto” image All-In-Focus Macro
60
Snapshot Tutorial
NOTE
When shooting with this function, zoom is fixed at wide angle.
When shooting with this function, the flash setting automatically becomes
? (Flash Off).
Shooting with this function automatically sets Anti Shake to “Standard” (page 100),
but large movement of the camera or subject make it impossible to achieve the
desired shot.
Depending on shooting conditions, image composition, and the subject you are
shooting, this scene may not be able to produce the desired result.
The message “Image merging failed.” will appear if the All-In-Focus Macro process
cannot be performed for some reason. The images shot by the camera will be
saved even if they cannot be merged.
A variety of artistic effects help to make even common, ordinary subjects become
more novel and exciting.
Shooting with Artistic Effects (ART SHOT)
Scene Description
HDR Art
Applies HDR (High Dynamic Range, page 76) photography
to transform snapshots and movies into works of art that
provide a greater degree of expression than conventional
imaging.
Toy Camera
Darkens the periphery and changes hues for a toy camera
effect.
Soft Focus Blurs overall focus for a mysteriously soft effect.
Light Tone Weakens contrast to create an elegantly subdued effect.
Pop Strengthens saturation for richer colors.
Sepia Sepia colors are used to create a retro effect.
Monochrome Enhances contrast to create a grainy print effect.
Miniature
Blurs some of the focus to make the image look like a
miniature.
Fisheye
Humorous effect that looks like it was shot with a fisheye
lens.
61
Snapshot Tutorial
1. Align the mode dial with [C] (ART SHOT).
2. Press [SET].
3. Use [8] and [2] to select , and then press [SET].
4. Select the ART SHOT scene you want to use and then press [SET].
5. Press [SET], use [8] and [2] to select the fifth Control Panel option
from the top, and then press [SET].
The intensity of the selected effect can be adjusted as described below.
6. Use [8] and [2] to change the setting.
7. Press [SET].
8. Press the shutter button to shoot.
Select from among: HDR Art, Toy Camera, Soft Focus, Light Tone, Pop, Sepia,
Monochrome, Miniature, Fisheye
Scene Adjustment
HDR Art Effect level
Toy Camera Hue
Soft Focus Effect level
Light Tone Hue
Pop Effect level
Sepia Effect level
Monochrome Effect level
Miniature Focus area
Fisheye Effect level
62
Snapshot Tutorial
. Using the Scene Information Screen
To find out more about a scene, select it with the boundary
on the scene menu and then rotate the zoom controller in
either direction.
To return to the scene menu, rotate the zoom controller
again.
To scroll between scenes, use [4] and [6].
To configure the camera with the settings for the currently
selected scene, press [SET].
NOTE
Depending on the “ART SHOT” scenes, some of the items on the menu that
appears may not be usable.
With this “ART SHOT” scene, the flash setting automatically becomes
?
(Flash
Off).
With HDR Art Movie, the “Movie Quality” setting can be either “HD” or “STD” only
(page 96). When any “Movie Quality” setting other than “STD” is selected in
another mode, the “HD” setting is used when shooting with HDR Art Movie.
When using “HDR Art” for movie recording, the intensity of the art effect is fixed in
accordance with movie settings.
You can configure the camera to save two images when shooting with HDR Art: one
image with HDR Art effects applied in accordance with the scene you selected plus
another normal (Program Auto) image without any effects applied.
1. Align the mode dial with [C] and then press [MENU].
2. Press [4], use [8] and [2] to select the “
r
REC MENU” tab, and then
press [6].
3. Use [8] and [2] to select “Double (HDR Art)” and then press [SET].
4. Use [8] and [2] to select “On” and then press [SET].
While “Off” is selected for the above step, only a single HDR Art image is saved
(normal image not saved).
5. Press the shutter button to shoot.
Saving a Second Normal Image When Shooting With HDR Art
(Double (HDR Art))
63
Snapshot Tutorial
Triple Shot shoots a burst of three images and stores them in memory. This feature is
great for making sure you don’t miss those special moments when kids are around.
1. Align the mode dial with [D] (Triple Shot).
2. Point the camera at the subject and then half-press the shutter button.
The camera will start pre-recording images at this time.
If you release the half-pressed shutter button before pressing it the rest of the
way down, all of the images currently in the pre-record buffer will be deleted.
3. Press the shutter button all the way down to record.
This will record three images: one of the action before the shutter button is fully
pressed plus two real-time images.
Pressing the shutter button all the way without first half-pressing it will result in
only two images being recorded.
NOTE
The settings in the table below are fixed while shooting with this function.
* If you select “I Multi” or “O Tracking” for this setting in another mode and then
shoot with Triple Shot, shooting is performed using the “U Spot” setting.
Shooting with Triple Shot
Self-timer Off
Flash Flash Off
Image Quality Normal
Single SR Zoom Off
Face Detection On
Focus Mode AF
AF Area “Intelligent” or “Spot”*
64
Recording Movies
Recording Movies
The following procedure explains how to record a standard (STD) movie.
This camera supports Premium Auto Pro movie recording (page 65).
See the pages indicated below for more information about movies.
High-definition movie (FHD movie): page 67
High speed movie (HS movie): page 67
1. Align the mode dial with [P] (Program
Auto) or [Ÿ] (Premium Auto Pro).
2. Press [MENU].
3. Press [4], use [8] and [2] to select the
r
REC MENU” tab, and then press
[SET].
4. Use [8] and [2] to select “Movie
Quality” and then press [6].
5. Use [8] and [2] to select “STD” (Standard),
and then press [SET].
Recording is performed with an aspect ratio of
4:3, an image size of 640
x
480 pixels, and a
frame rate of 30 frames per second (STD
Movie). Image size setting cannot be changed.
The semi-transparent gray frame on the monitor
screen indicates the area that is recorded when
shooting a movie. The area within the frame is
recorded for a movie.
6. Press [0] (Movie).
This will start recording and display Y on the
monitor screen.
Movie recording includes stereo audio.
7. Press [0] (Movie) again to stop recording.
Each movie can be up to 29 minutes long. Movie
recording stops automatically after 29 minutes of
recording. Movie recording also will stop
automatically if memory becomes full before you
stop movie recording by pressing [0] (Movie)
again.
To record a movie
[0] (Movie)
[MENU]
[SET]
[8][2][4][6]
Mode dial
Semi-transparent gray
frame
Recording time
Remaining recording time
(page 189)
65
Recording Movies
Recording Movies with Premium Auto Pro
When Premium Auto Pro is enabled (page 28), the
camera automatically make judgments about the
subject, shooting conditions, and other parameters. The
result is higher quality images than those produced by
Program Auto recording. The shooting environment detected by the camera is
displayed at the bottom of the REC mode screen.
Premium Auto Pro is enabled for FHD movies and STD movies only.
Using Premium Auto Pro uses up the battery charge more quickly than using
Program Auto recording.
Shooting with BEST SHOT
With BEST SHOT (page 73), you can select the sample scene that matches the type
of movie you are trying to shoot and the camera will change its setup accordingly, for
beautiful movies every time.
Minimizing the Effects of Camera Movement during Movie Recording
You can use Anti Shake (page 100) to configure the camera to minimize the effects of
camera movement during FHD and STD movie recording. Note that Anti Shake
cannot be used with HDR Art Movie and that Anti Shake does not prevent image blur
due to subject movement.
Your camera has built-in microphones that can be used to record audio (stereo)
during movie recording.
Your camera has a function to reduce wind noise (Wind Noise Cut) when recording
movies (page 103).
. Recording Precautions
The camera also records audio. Note the following points
when shooting a movie.
Take care that the microphones are not blocked by your
fingers, etc.
Good audio recording results are not possible when the
camera is too far away from what you are trying to
record.
Performing a zoom operation while shooting can cause zoom and/or auto focus
noise to be in the audio recording.
Operating camera buttons while shooting can cause button noise to be picked
up in the audio.
When shooting with the “HS” movie mode at a frame rate setting of “30-120 fps” or
“30-240 fps”, audio is recorded only while the camera is shooting at 30 fps. Audio is
not recorded at any other frame rates.
Audio
Microphones
66
Recording Movies
IMPORTANT!
Spending a long time using movie recording will cause the camera to become
slightly warm to the touch. This is normal and does not indicate malfunction.
Shooting movies for long periods in areas where temperature is relatively high can
cause digital noise (dots of light) to appear in the movie image. A rise in the
camera’s internal temperature also may force movie recording to stop
automatically. If this happens, stop recording and allow the camera to cool down,
which should cause normal operation to resume.
Using the camera’s built-in memory or certain types of memory cards can slow
down processing speed. Whenever possible use an Ultra High-Speed Type
memory card. Note, however, that not all operations can be guaranteed even if an
Ultra High-Speed Type memory card is used. Certain movie quality settings can
result in too much time being required to record data, which can result in breaks in
the image and/or audio during playback. If this happens, the Y will turn yellow on
the monitor screen.
NOTE
Zoom operations are supported during movie recording (page 50). Zoom is
disabled during high speed movie recording. To use zoom for high speed movie
recording, perform the zoom operation before you press [0] (Movie) to start
recording.
Both Single SR Zoom (page 53) and Multi SR Zoom (page 54) are disabled during
movie recording.
The effects of camera movement in an image become more pronounced when you
shoot close up or with a large zoom factor. Because of this, use of a tripod is
recommended under these conditions.
Except for High Speed Movie, Continuous AF (page 101) is performed during
movie recording while “AF” (Auto Focus) or “Macro” is selected for the “Focus”
setting.
Face Detection is disabled during normal FHD and STD, and high speed movie
recording. Face Detection is enabled when shooting movies with Premium Auto
Pro (FHD and STD).
The following functions do not support movie recording.
Blurred Background, All-In-Focus Macro, Triple Shot, Multi SR Zoom, some BEST
SHOT scenes
The A, S, and M recording modes are not supported when shooting a movie, or
when using the “Prerecord (Movie)” and “For YouTube” BEST SHOT scenes. In
these cases, the recording mode is always P (Program Auto).
67
Recording Movies
This camera supports recording of high-definition (FHD) movies. The aspect ratio of
an FHD movie is 16:9, the image size is 1920
x
1080 pixels, and the frame rate is
30 fps. Image quality and image size settings cannot be changed.
1. Align the mode dial with [P] (Program Auto) or [Ÿ] (Premium Auto
Pro).
2. Press [MENU].
3. Press [4], use [8] and [2] to select the “
r
REC MENU” tab, and then
press [SET].
4. Use [8] and [2] to select “Movie Quality” and then press [6].
5. Use [8] and [2] to select “FHD”, and then press [SET].
6. Record the movie the same way as you would a normal movie (page
64).
Press [0] (Movie) to start and stop recording.
This camera supports recording of high speed movies at a maximum speed of
1000 fps. The aspect ratio of movies recorded with this mode depends on the frame
rate (recording speed).
When recording with the frame rate setting of “30-120 fps” or “30-240 fps” frame
rate setting, audio recording is supported during 30 fps recording only. Audio is not
recorded at any other frame rates.
1. Align the mode dial with [P] (Program Auto).
2. Press [MENU].
3. Press [4], use [8] and [2] to select the “
r
REC MENU” tab, and then
press [SET].
Recording a High-definition Movie
Recording a High Speed Movie
68
Recording Movies
4. Use [8] and [2] to select “Movie Quality” and then press [6].
5. Use [8] and [2] to select the frame rate (recording speed) you want
and then press [SET].
A fast frame rate (such as 1000 fps) will result in a smaller image size.
6. Record the movie the same way as you would a normal movie (page
64).
Press [0] (Movie) to start and stop recording.
During High Speed Movie recording (HS120, HS240, HS480, HS1000), focus
is fixed at the position where it was when recording started. To focus an image,
half-press the shutter button for Auto Focus or focus manually before you press
[0] (Movie) to start recording.
Continuous AF is operational when recording at 30 fps with “HS30-120” or
“HS30-240”. However, focus becomes fixed whenever you switch to 120 fps or
240 fps.
When “HS30-120” or “HS30-240” is selected as the frame rate, recording
always starts with a frame rate of 30 fps. You can switch the frame rate
between 30 fps and 120 fps or between 30 fps and 240 fps only while recording
is in progress. Press [4], [6], or [SET] to switch speeds. Audio is recorded
only while shooting at a 30 fps.
Movie
Quality
REC Screen
Icon Display
Frame Rate
Image Size
(Pixels)
HS1000 1000 fps 224
x
64
fps (frames per
second) is a unit of
measurement
indicating the
number of images
recorded or played
back per second.
HS480 480 fps 224
x
160
HS240 240 fps 512
x
384
HS120 120 fps 640
x
480
HS30-240 30-240 fps 512
x
384
HS30-120 30-120 fps 640
x
480
69
Recording Movies
NOTE
The higher the frame rate (speed), the more lighting is required when shooting.
When shooting a high speed movie, shoot in a well-lit environment.
When recording certain types of movies, the image that appears on the monitor
screen may be smaller than normal. When recording a high speed movie, there are
black bands along the top, bottom, left, and right of the screen.
When recording a high speed movie, light source flicker can cause horizontal
bands to appear in the image. This does not indicate malfunction of the camera.
Monitor screen content switching is disabled during high speed movie recording.
Prerecord (Movie) maintains a pre-recording of approximately five seconds of action
(approximately two seconds for High Speed Movie). When you start real-time
recording, the pre-recorded content is stored followed by the real-time recording, to
help make sure you do not miss anything by being late pressing the record button.
. To set up the camera to shoot with Prerecord Movie
1. Align the mode dial with [b] (BEST SHOT).
2. Press [MENU].
3. Press [4], use [8] and [2] to select the “
r
REC MENU” tab, and then
press [SET].
4. Use [8] and [2] to select “Movie Quality” and then press [6].
5. Use [8] and [2] to select the movie mode you want to use for shooting
and then press [SET].
Using Prerecord Movie (Prerecord (Movie))
[0] (Movie)[0] (Movie)
Movie
Real-time recording start
Approximately 5-second prerecorded part (from the buffer)
Approximately two seconds for high speed movie
Real-time recording end
70
Recording Movies
6. Press [SET].
7. Use [8] and [2] to select , and then press [SET].
8. Use [8], [2], [4], and [6] to select the “Prerecord (Movie)” scene and
then press [SET].
This causes (Prerecord (Movie)) to appear on the monitor screen, indicating
that the camera is prerecording to its buffer.
. To shoot a Prerecord Movie
1. After using the above procedure to set up the camera for Prerecord
Movie, point the camera at the subject.
2. When you are ready to record, press [0] (Movie).
This will save the approximately five seconds of action that was prerecorded in
the buffer before you pressed [0] (Movie) (two seconds if you are using high
speed movie) and start real-time recording.
3. Press [0] (Movie) again to stop recording.
To turn off Prerecord Movie recording, align the mode dial with [P] (Program
Auto) or [Ÿ] (Premium Auto Pro).
When shooting with the high speed movie “HS30-120” and “HS30-240” setting,
you cannot change the speed (fps) setting while the camera is pre-recording to
the buffer in step 1 of the above procedure. You can change the speed (fps)
setting after you press [0] (Movie) to start real-time recording.
NOTE
While the camera is set up for shooting with Prerecord Movie, pressing the shutter
button will not shoot a snapshot unless movie recording is in progress. With high-
definition (FHD) and standard (STD) movie, you can shoot still images while
realtime movie recording is in progress.
When shooting with Prerecord Movie in combination with high speed movie,
rotating the control dial will not change the EV shift or white balance setting, even if
“EV Shift” or “White Balance” is assigned for the “Control Dial” function. To change
the EV shift or white balance setting in this case, use the Control Panel.
71
Recording Movies
The “For YouTube” scene records movies in a format that is optimal for uploading to
the YouTube movie site, which is operated by YouTube, LLC. “For YouTube” can be
used when shooting a standard (STD) movie, a high-definition (FHD) movie, or a high
speed (HS) movie.
1. Align the mode dial with [b] (BEST SHOT).
2. Press [MENU].
3. Press [4], use [8] and [2] to select the “
r
REC MENU” tab, and then
press [SET].
4. Use [8] and [2] to select “Movie Quality” and then press [6].
5. Use [8] and [2] to select the movie mode you want to use for shooting
and then press [SET].
6. Press [SET].
7. Use [8] and [2] to select , and then press [SET].
8. Use [8], [2], [4], and [6] to select the “For YouTube” scene and then
press [SET].
This causes Ê to appear on the monitor screen.
9. Record the movie.
The movie file will be stored in a camera folder named “100YOUTB”.
Installing YouTube Uploader for CASIO simplifies uploading of movie files you
recorded with the “For YouTube” scene to YouTube.
To exit “For YouTube”, align the mode dial with [P] (Program Auto) or
[Ÿ] (Premium Auto Pro).
NOTE
Movies recorded with the “For YouTube” scene are stored in a special folder to
make them easy to locate for uploading (page 151). “For YouTube” movies are
shot using the image size, recording speed, and quality settings configured in the
Movie Mode (page 64).
Snapshots cannot be shot (regardless of whether you are recording or not) while
the “For YouTube” scene is selected.
A single movie can have a maximum file size of 2,048MB or a playback time of
15 minutes. The actual maximum recording time depends on the movie mode used
for recording (page 190).
Recording a Movie for YouTube (For YouTube)
72
Recording Movies
You can shoot snapshots while movie recording is in progress. When the camera is in
the Single Shot mode, you can shoot snapshots one-by-one. In the CS mode, holding
down the shutter button will record up to seven consecutive images at a speed of
approximately 10 images per second (fps). You can shoot a maximum total of
28 images during a single movie recording operation.
NOTE
Note that the flash cannot be used when shooting a Snapshot In Movie.
Note that shooting a snapshot while shooting a movie is supported during FHD
movie and STD movie recording only. It is not supported during other types of
movie recording.
Snapshots shot with Snapshot In Movie cannot be focused individually. The focus
will be the same as the movie being recorded.
The field of view of a snapshot shot while FHD movie recording is in progress will
be wider than the field of view of the FHD movie.
The snapshot image quality automatically changes to “Normal”.
The P (Program Auto) recording mode is used when you shoot a snapshot during
movie recording.
Shooting a Snapshot while Shooting a Movie
(Snapshot In Movie)
1. While a movie is being recorded, press the
shutter button.
In the CS mode, images continue to be shot as long
as you keep the shutter button depressed.
Movie recording is not interrupted while snapshots
are being shot.
While movie recording is in progress, you can toggle
between the Single Shot Mode and the CS mode by
pressing [Õ] (Continuous Shutter), [4], [6], or
[SET]. Note that this method for mode switching is
possible only during movie recording. The CS mode
is indicated when is white (on the monitor
screen), and the Single Shot mode is selected when
t is white.
Number of recordable
snapshots
Snapshot
recording mode
73
Using BEST SHOT
Using BEST SHOT
BEST SHOT provides you with a collection of sample “scenes” that show a variety of
different types of shooting conditions. When you need to change the setup of the
camera, simply find the scene that matches what you are trying to achieve, and the
camera sets up for it automatically. This helps to minimize the chance of ruined
images due to poor exposure and shutter speed settings.
. Some Sample Scenes
1. Align the mode dial with [b] (BEST
SHOT).
2. Press [SET].
3. Use [8] and [2] to select , and then
press [SET].
This will display a menu of BEST SHOT
scenes.
4. Use [8], [2], [4], and [6] to move the
boundary to the scene you want to
select.
You can scroll to another page of scenes
by pressing [8] or [2].
To return to normal snapshot recording,
align the mode dial with [P] (Program
Auto).
Portrait Scenery
High Speed Night
Scene
High Speed Night
Scene and Portrait
To shoot with BEST SHOT
Currently selected
scene (with boundary)
Scene number
Scene name
[b][SET]
[8] [2] [4] [6]
74
Using BEST SHOT
5. Press [SET] to configure the camera with the settings for the currently
selected scene.
This returns to the REC mode.
To select a different BEST SHOT scene, repeat the above procedure from
step 1.
6. Press the shutter button (if you are shooting a snapshot) or [0] (Movie)
(if you are shooting a movie).
. Using the Scene Information Screen
To find out more about a scene, select it with the boundary
on the scene menu and then rotate the zoom controller in
either direction.
To return to the scene menu, rotate the zoom controller
again.
To scroll between scenes, use [4] and [6].
To configure the camera with the settings for the currently
selected scene, press [SET].
. BEST SHOT Precautions
Sample images shown on BEST SHOT scene screens were not shot with this
camera. There are provided to illustrate the effects and merits of each scene.
Images shot using a BEST SHOT scene may not produce the results you expected
due to shooting conditions and other factors.
You can modify the camera settings that are configured after you select a BEST
SHOT scene. Note, however, that the BEST SHOT settings revert to their defaults
when you select another BEST SHOT scene or turn off the camera.
Snapshot shooting is disabled while the following BEST SHOT scenes are being
used.
Prerecord (Movie), For YouTube
Movie recording is disabled while the following BEST SHOT scenes are being
used.
High Speed Best Selection, Lag Correction, High Speed Anti Shake, Wide Shot,
High Speed Night Shot, Slide Panorama, Snapshot, HDMI TV Output
When the movie mode is FHD/STD, movies are recorded using the settings of the
selected BEST SHOT scene. For high speed movie recording, BEST SHOT scene
settings are ignored and movie recording is performed as it normally is.
BEST SHOT scenes that use High Speed CS ignore the “Zoom (SR)” setting.
With the BEST SHOT scenes below, certain shooting conditions can cause the
image area to become narrower than normal.
High Speed Night Scene and Portrait, High Speed Night Scene
The maximum zoom factor is 2.0X when using the BEST SHOT scenes below.
Fireworks, Sundown
75
Using BEST SHOT
You can register up to 999 setups, based on snapshots shot with the camera, as
“CUSTOM SHOT” scenes. Selecting a registered “CUSTOM SHOT” scene
configures the camera with its settings. The setups of snapshots recorded with the
following modes and features can be registered as “CUSTOM SHOT” scenes.
Program Auto
A Mode
S Mode
M Mode
BEST SHOT (Excluding “Prerecord (Movie)”, “For YouTube”, and “HDMI TV
Output”)
. To register a “CUSTOM SHOT” scene
1. On the BEST SHOT scene menu, select the scene named “CUSTOM
SHOT (Register User Scene)” and then press [SET].
2. Use [4] and [6] to select the snapshot whose setup you want to save.
3. Use [8] and [2] to select “Save”, and then press [SET].
Your scene will be assigned the name “Custom Scene”, along with a scene
number.
NOTE
A movie setup cannot be registered as a “CUSTOM SHOT” scene.
You can check the settings of the currently selected “CUSTOM SHOT” scene by
displaying the camera’s setting menus and looking at its settings.
“CUSTOM SHOT” scenes are assigned numbers in the sequence: U1, U2, and so
on.
The following are the settings that are saved for each “CUSTOM SHOT” scene.
Face Detection, Focus, EV Shift, White Balance, Flash, ISO, Metering, Lighting,
Flash Intensity, Sharpness, Saturation, Contrast
“CUSTOM SHOT” scenes are stored in built-in memory (page 151) in the SCENE
folder (snapshots).
Formatting the camera’s built-in memory (page 162) deletes all user “CUSTOM
SHOT” scenes.
Use the following procedure when you want to delete a “CUSTOM SHOT” scene.
1
Display the information screen (page 74) of the user BEST SHOT scene you
want to delete.
2
Press [2] ( ), select “Clear”, and then press [SET].
Creating and Using Your Own Setups (CUSTOM SHOT)
76
Using BEST SHOT
. To record with a registered CUSTOM SHOT scene
1. Align the mode dial with [b] (BEST SHOT).
2. Press [SET].
3. Use [8] and [2] to select , and then press [SET].
4. Select the registered “Custom Scene”, and then press [SET].
5. Press the shutter button to shoot.
With HDR (High Dynamic Range), the camera shoots a series of CS images using
different exposure settings and combines them into a final image to correct for
overexposure or underexposure of subjects of different brightness levels.
1. Align the mode dial with [b] (BEST SHOT).
2. Press [SET].
3. Use [8] and [2] to select , and then press [SET].
4. Select “HDR” and then press [SET].
5. Press [SET] and then use [8] and [2] to select the (HDR Level)
Control Panel option, and then press [SET].
6. Use [8] and [2] to select the HDR Level setting you want, and then
press [SET].
The HDR Level can be set to Level 1, Level 2, or Level 3.
7. Press the shutter button to shoot.
NOTE
HDR works best when shooting with the camera mounted on a tripod.
Shooting with this function causes the flash setting to change automatically to
?
(Flash Off).
Anti Shake correction performed to compensate for camera movement while
shooting with this function results in an image area that is narrower than normal.
The desired HDR effect may not be attained if the camera or subject moves during
shooting.
Depending on shooting conditions and image composition, this function may not be
able to produce the desired result.
Digitally Correcting for Overexposure and Underexposure
(HDR)
77
Using BEST SHOT
The camera shoots a series of images and then merges them into a final image. The
result is a bright image, even if shot in the dark without a flash.
1. Align the mode dial with [b] (BEST SHOT).
2. Press [SET].
3. Use [8] and [2] to select , and then press [SET].
4. Select “High Speed Night Shot” and then press [SET].
5. Press the shutter button to shoot.
Take care to avoid camera movement and subject movement as you shoot.
You should be able to see the subject(s) on the monitor screen when
composing the image.
NOTE
When shooting with this function, the “ISO Sensitivity” (page 44) becomes “Auto”
(fixed).
If camera movement occurs when shooting with this function, the anti-shake
process will result in an image range that is narrower than normal.
When shooting with this function, the 16M, 3:2, and 16:9 image size settings
cannot be selected. If one of these sizes is selected in another mode, the image
size will change to 10M when this function is selected.
Shooting Bright Images in the Dark without Flash
(High Speed Night Shot)
Shot with “Program Auto”, without flash Shot with “High Speed Night Shot”
78
Using BEST SHOT
With this feature, a number of images are shot and then combined to produce an
image with a super-wide angle of view that exceeds the widest angle of view possible
with the lens. Converted to 35 mm equivalents, the focal distances available with this
feature enable shooting with approximate angles of view of 15 mm and 19 mm.
1. Align the mode dial with [b] (BEST SHOT).
2. Press [SET].
3. Use [8] and [2] to select , and then press [SET].
4. Select “Wide Shot” and then press [SET].
5. Press [SET] and then use [8] and [2] to select the (Wide Level)
Control Panel option, and then press [SET].
6. Use [8] and [2] to select the width setting (angle of view) you want
and then press [SET].
There are two settings available: “19 mm” and “15 mm”.
“15 mm” shoots a wider area than “19 mm”.
7. Hold the camera so it is
upright, with the shutter
button and other controls
at the bottom.
Do not point the camera
straight down at the ground
at this time. If you do, the
camera’s built-in vertical/
horizontal position sensor
will not operate properly
and may make it impossible
to start shooting.
Shooting with a Super Wide Angle of View (Wide Shot)
25 mm (lens widest angle) 19 mm 15 mm
Shutter button
Control dial
79
Using BEST SHOT
8. Point the camera at the
subject you want in the
center of the image and then
half-press the shutter button
to focus.
The outer blue boundary on
the screen indicates the
recordable range of the image.
9. Press the shutter button the rest of the way
down and slowly move the camera in
accordance with the instructions and arrow that
appear on the monitor screen.
Holding the camera firmly with both hands, follow
the instructions that appear on the monitor screen to
slowly slide the camera horizontally or vertically at a
constant speed in an arc centered on your body.
When sliding the camera horizontally, do not allow
your body to move left or right. A vertical line
running through your body should serve as the
axis.
When sliding the camera vertically, do not allow your body to move upwards
or downwards. A horizontal line between your shoulders should serve as the
axis.
Take care not to slide the camera diagonally and be sure to maintain a firm
grip on it.
The camera will start composing the super-wide image internally when the
slide cursor reached the other end of the movement range.
Image composing also will start automatically if you stop moving the camera
during super-wide shooting. After you stop moving the camera, the message
“Busy... Please wait...” appears as the camera processes the image. Wait until
this message disappears before using the camera. Image shooting is disabled
while the message is displayed.
Desired image
Center part at the start of the
shooting operation
Blue boundary
Arrow
Instructions
80
Using BEST SHOT
NOTE
The “15 mm” and “19 mm” angle of view values are approximate and are provided
for reference only. Actual angle of view values are not guaranteed.
Zoom operations are not supported during Wide Shot shooting. The zoom setting
is fixed at full wide angle.
This function makes it possible to shoot images with a maximum angle of view of
15 mm or 19 mm. Note, however, that shooting conditions can result in a smaller
angle of view.
The following conditions are not compatible with Wide Shot shooting.
Subject whose brightness is very different from that of its surroundings due to
artificial light, sunlight, etc.
Rivers, waves, waterfalls, or other subject with constantly changing patterns
Sky, beach, or other subject with continuous patterns
Camera too close to the main subject
Moving subject
Panning upwards on a skyscraper or some other very tall structure or object
Dark surroundings
Any of the following can cause Wide Shot operation to stop part way through.
Subject or camera movement
Camera movement that is too fast or too slow
Camera movement outside of the required route
Camera movement in the wrong direction
Shooting a Wide Shot image after half-pressing the shutter button to perform Auto
Focus may not produce the desired results if there are considerable differences in
the brightness, color, and/or focus of the individual images. If this happens, try
changing the focus position by focusing on a different subject, etc.
Since a Wide Shot image is created by joining multiple images together, there may
be some roughness at the point where two images are joined.
Shooting under a flickering light source (such as fluorescent lighting) may result in
uneven brightness and/or coloring in the final Wide Shot image.
The exposure and white balance when shooting Wide Shot images are fixed at the
levels measured when you half-press the shutter button at the beginning of the
operation.
With this BEST SHOT scene, the flash setting automatically becomes ? (Flash
Off).
81
Using BEST SHOT
With Slide Panorama, you move the camera to compose and record multiple images,
which are then combined to a panorama. This feature lets you shoot a panorama of
up to 360 degrees, which is dramatically greater than the physical capabilities of the
lens.
The final panorama image can be one of the two sizes shown below.
Slide Direction is Right or Left: Maximum 11520
x
1080 pixels
Slide Direction is Up or Down: Maximum 1920
x
7296 pixels
Zoom operations are not supporting during Slide Panorama shooting. The zoom
setting is fixed at full wide angle.
You can use Slide Panorama to shoot a horizontal image up to approximately
360 degrees and a vertical image up to approximately 180 degrees.
If you shoot a horizontal Slide Panorama image that is less than 360 degrees, the
image size will become 60, 120, 180, 240, or 300 degrees.
1. Align the mode dial with [b] (BEST SHOT).
2. Press [SET].
3. Use [8] and [2] to select , and then press [SET].
4. Select “Slide Panorama” and then press [SET].
5. Press [SET] and then use [8] and [2] to select the (Slide Direction)
Control Panel option, and then press [SET].
6. Use [8] and [2] to select the direction you are planning to move the
camera while shooting, and then press [SET].
You can select one of four directions: Right, Left, Up, or Down.
7. Point the camera at the start of the panorama and half-press the
shutter button to allow the camera to focus automatically.
Shooting a Panorama Image (Slide Panorama)
82
Using BEST SHOT
8. Press the shutter button the rest of the way down
and a slide cursor will appear on the monitor
screen. Slowly move the camera in the direction
indicated by the arrow on the screen until the
slide cursor reaches the other end of its
movement range (i.e. all the way to the right
when moving the camera to the right).
The camera will start composing the panorama image
internally when the slide cursor reached the other end
of the movement range.
Image composing also will start automatically if you
stop moving the camera during panorama shooting.
After you stop moving the camera, the message
“Busy... Please wait...” appears as the camera
processes the image. Wait until this message
disappears before using the camera. Image shooting
is disabled while the message is displayed.
NOTE
The following conditions are not compatible with Slide Panorama shooting.
Subject whose brightness is very different from that of its surroundings due to
artificial light, sunlight, etc.
Rivers, waves, waterfalls, or other subject with constantly changing patterns
Sky, beach, or other subject with continuous patterns
Camera too close to the main subject
Moving subject
Dark surroundings
Slide Panorama may stop part way through in the following cases.
Subject or camera movement
Camera movement that is too fast or too slow
Shooting a Slide Panorama image after half-pressing the shutter button to perform
Auto Focus may not produce the desired results if there are considerable
differences in the brightness, color, and/or focus of the individual images. If this
happens, try changing the focus position by focusing on a different subject, etc.
Since a Slide Panorama image is created by joining multiple images together, there
may be some roughness at the point where two images are joined.
Shooting under a flickering light source (such as fluorescent lighting) may result in
uneven brightness and/or coloring in the final Slide Panorama image.
The exposure and white balance when shooting Slide Panorama images are fixed
at the levels measured when you half-press the shutter button at the beginning of
the operation.
Shooting with this function causes the flash setting to change automatically to
? (Flash Off).
Slide cursor
83
Using BEST SHOT
With High Speed Best Selection, the camera automatically shoots a series of images,
and selects the best one based on facial image blur, and facial expression (whether
the subject is smiling or blinking).
1. Align the mode dial with [b] (BEST SHOT).
2. Press [SET].
3. Use [8] and [2] to select , and then press [SET].
4. Select “High Speed Best Selection” and then press [SET].
5. Press the shutter button to shoot.
This will cause the message “Busy... Please wait...” to appear. Do not move
the camera while this message is displayed. The recording process takes
some time to complete after the message appears.
NOTE
Shooting with this function causes the flash setting to change automatically to
?
(Flash Off).
If one or more of the faces are blurred in all of the images that are shot, they will be
blurred in the final image as well.
The following conditions may make it impossible for the camera to determine if the
subject is blinking or smiling. This may result in a final image in which the subject is
blinking or not smiling.
Faces that are partially or completely darkened by shadows, etc.
Hair that is hiding or near the eyes
Eye glasses
Small faces
Faces that are not looking directly at the camera
Shooting a large group of people will cause processing of the image after shooting
to take longer.
Shooting with Priority on Subject Faces
(High Speed Best Selection)
84
Using BEST SHOT
There always is some unavoidable time lag between the point you press the shutter
button and the point that the image is actually recorded. The “Lag Correction” feature
lets you configure the camera to lessen or even eliminate this lag to help you better
time your shots and get exactly the moment you want. With “Lag Correction”, you
half-press the shutter button and compose the image you want to shoot. Then when
you full-press the shutter button, the camera pre-records a total of 5 images, including
four images of action that happened before you fully pressed the shutter button. After
that, you can view the images on the monitor screen and select the one you want to
keep.
1. Align the mode dial with [b] (BEST SHOT).
2. Press [SET].
3. Use [8] and [2] to select , and then press [SET].
4. Select “Lag Correction” and then press [SET].
5. With the camera pointed at the subject, half-press and hold the shutter
button.
The camera will start pre-recording images at this time.
If you release the half-pressed shutter button before pressing it the rest of the
way down, all of the pre-recorded images currently in the buffer will be deleted.
6. When you are ready to shoot, press the shutter button all the way
down.
After pre-recording is complete, one of the five images will appear on the monitor
screen for about three seconds.
7. If you want to view all five of the pre-recorded images, press [SET]
within about three seconds after a recorded image appears on the
monitor screen.
If you do not press [SET] within three seconds, the image displayed in step 6 will
be saved automatically as the final image.
Configuring the Camera to Help You Better Time Your Shots
(Lag Correction)
85
Using BEST SHOT
8. Use [4] and [6] to scroll through the pre-recorded images on the
monitor screen.
Use [4] and [6] to scroll through the pre-recorded images. Each image appears,
along with an indication of the timing when it was pre-recorded.
* Seconds prior to full-press of shutter button.
The timing of the image you select here will be the timing of the image
displayed first in step 6 the next time you perform the above procedure. If you
select the image that was pre-recorded 0.3 seconds prior to full-press of the
shutter button, for example, the –0.3-second image will be displayed in step 6
the next time you perform the above procedure.
9. To save the currently displayed image as the final images, press [SET].
NOTE
With this BEST SHOT scene, the flash setting automatically becomes
?
(Flash
Off).
The Self-timer cannot be used with this BEST SHOT scene.
With this BEST SHOT scene, half-pressing the shutter button fixes focus and
exposure at their current levels.
With this BEST SHOT scene, image recording will not be successful if you full-
press the shutter button without allowing enough time (at least 0.4 seconds) after
half-pressing it.
Pay close attention to the subject when shooting. Failure to do so can cause
considerable lag from the instant you want to shoot until you actually full-press the
shutter button. This can cause image recording to be too late, even if you use this
function.
The current “Review” setting (page 107) is ignored when shooting with this
function. Immediately after you full-press the shutter button, one of the five pre-
recorded images will appear on the display as in step 4 of the above procedure.
–0.4 sec. –0.3 sec. –0.2 sec. –0.1 sec. SHUTTER
(0.4*)(0.3*)(0.2*)(0.1*)(Full-press)
86
Using BEST SHOT
AF-CS shoots up to 30 CS images while keeping the subject in focus. This feature
comes in handy when shooting children and other fast-moving subjects. The CS
speed is automatically adjusted in accordance with shooting conditions within the
range of three to five frames per second.
1. Align the mode dial with [b] (BEST SHOT).
2. Press [SET].
3. Use [8] and [2] to select , and then press [SET].
4. Select “AF-CS” and then press [SET].
5. Press the shutter button the rest of the way down.
Hold down the shutter button to shoot up to 30 images at high speed.
NOTE
Zoom is disabled during continuous shutter operations.
The following image sizes cannot be selected while shooting with Auto Focus CS:
3:2, 16:9. If select AF-CS while either of these image sizes is selected, the camera
will automatically switch the images size setting to 16M.
The following camera features cannot be used while shooting with Auto Focus CS:
Triple Self-timer, Single SR Zoom.
The settings in the table below are fixed while shooting with AF-CS.
Using Continuous Shutter with Auto Focus (AF-CS)
Image Quality Normal
Flash Flash Off
Focus Mode AF
AF Area Spot
87
Using BEST SHOT
You can configure the camera to save a RAW image* along with a standard JPEG
image when shooting snapshots. RAW image data is stored in a camera folder
named “RAW” (page 151).
* A RAW image is image data (file name extension .DNG) that is unprocessed
internally by the camera. Since there is no image deterioration, RAW files provide
more creative freedom when used with software that supports general-purpose
DNG format files.
1. Align the mode dial with [b] (BEST SHOT).
2. Press [SET].
3. Use [8] and [2] to select , and then press [SET].
4. Select “Raw Image” and then press [SET].
5. Press the shutter button to shoot.
NOTE
The image size is fixed at 16M when shooting with this function.
Single SR Zoom and Digital Zoom cannot be used with this function. Only optical
zoom can be used, up to a maximum zoom factor of 1.3X (34mm when converted
to 35mm film).
Shooting of RAW image data is not supported for movie recording.
When you press the shutter button while High Speed Anti Shake is enabled, the
camera records multiple images and automatically combines them in a way that
produces a final image with minimal blur. You can shoot with this feature to minimize
the effects of camera movement when shooting with optical Anti Shake does not
produce the desired results.
1. In the REC mode, set the mode dial to [b] (BEST SHOT).
2. Press [SET].
3. Select “High Speed Anti Shake” and then press [SET].
4. When you are ready to shoot, press the shutter button.
Shooting RAW Images (Raw Image)
Shooting with High Speed Anti Shake
(High Speed Anti Shake)
88
Using BEST SHOT
NOTE
With this BEST SHOT scene, the flash setting automatically becomes ? (Flash
Off).
High Speed Anti Shake may not operate properly resulting in blurred images if the
camera is moved more than the allowable range or if the subject moves during
shooting.
When shooting with these BEST SHOT scenes, the “ISO Sensitivity” (page 44) and
“ISO High Limit” (page 98) are fixed at “Auto”.
This function adjusts exposure and shoots whenever the shutter button is half-
pressed. This helps to ensure that you don’t miss the shots you want. This feature
comes in handy for daily shooting and when shooting natural scenery.
1. Align the mode dial with [b] (BEST SHOT).
2. Press [SET].
3. Use [8] and [2] to select , and then press [SET].
4. Select “Snapshot” and then press [SET].
5. Half-press the shutter button.
This will adjust exposure and shoot the snapshot.
This will cause a pan focus distance value (PF –o.om–) to appear in the
upper left corner of the display. Everything from this distance and further will be
in focus.
NOTE
The focus frame will not appear for this type of shot.
The settings below are fixed while shooting with this function.
An image shot with this function can be zoomed up to 1.3X.
Proper focusing may not be possible if the camera is too close to the subject, or if
the camera is subjected to vibration or impact.
Shooting Snapshots (Snapshot)
Focus Mode Pan Focus
ISO Sensitivity Auto
Make-up Level 0 (Off)
Flash Flash Off
89
Using BEST SHOT
Use the procedure below to configure the camera for shooting snapshots with an
aspect ratio of 16:9, as you compose them on a TV screen.
1. Turn off the camera and use a commercially available HDMI cable to
connect the camera to a TV.
2. Turn on the camera.
3. Align the Mode Dial with [b] (BEST SHOT).
4. Press [SET].
5. Use [8] and [2] to select and then press [SET].
6. Select “HDMI TV Output” and then press [SET].
This will turn off the camera’s monitor screen and display an image composition
screen on the connected TV.
7. Compose the image on the TV screen and press the shutter button to
shoot.
Using a TV Screen to Shoot Snapshots (HDMI TV Output)
HDMI connector
HDMI cable
(commercially
available)
HDMI micro connector
HDMI input
HDMI output (micro)
90
Using BEST SHOT
NOTE
For details about connecting to the camera and precautions when connecting, see
page 116.
If you want to change the digital video signal format, first unplug the HDMI cable
from the camera (page 118).
The settings in the table below are fixed while shooting with this function.
Image Size 16:9
AF Area Spot
Continuous AF Off
Face Detection Off
Make-up Level 0 (Off)
White Balance Auto WB
Metering Multi
91
Advanced Settings (REC MENU)
Advanced Settings (REC MENU)
The following are menu operations you can use to configure various camera settings.
You also can use the Control Panel (page 38) to configure some of the settings that
appear on the menu screen. Refer to the page references provided in this section
for information about configuring settings using the Control Panel.
. Example Menu Screen Operation
1. In the REC mode, press [MENU].
This will display the menu screen (r REC
MENU).
Menu contents are different in the REC mode
(r REC MENU) and PLAY mode (p PLAY
MENU).
2. Press [4], use [8] and [2] to select the tab
where the menu item you want to configure
is located, and then press [6].
3. Use [8] and [2] to select the menu item
you want, and then press [6].
Operating the zoom controller displays the next
page of menu items.
4. Use [8] and [2] to change the setting of
the selected menu item.
5. After the setting is the way you want, press
[SET] to apply the setting and return to the
viewfinder screen.
Pressing [MENU] cancels the current
selections and returns to the menu screen.
To display a different tab, press [MENU] to
move the blue boundary to the menu item and
then press [4]. Next use [8] and [2] to select
the tab you want, and then press [6].
Pressing [Õ] (Continuous Shutter) interrupts the menu operation and exits the
menu screen.
NOTE
Depending on the recording mode, some of the items on the menu that appears
may not be usable.
Configuring Recording Settings
[MENU]
[SET]
[8] [2] [4] [6]
Items
Example:
When “Self-timer” is
selected on the “
r
REC
MENU” tab
Tabs
92
Advanced Settings (REC MENU)
. Menu Operations in This Manual
Menu operations are represented in this manual as shown below. The following
operation is the same as the one described under “Example Menu Screen Operation”
on page 91.
Procedure
Enter the REC Mode * [MENU] *
r
REC MENU” Tab * Control Dial
You can assign any one of the four functions below to the control dial. After you do,
you can change the setting of the function by rotating the control dial.
* Configure the settings below in order to directly adjust focus with the control dial.
Face Detection: Off
Make-up Level: 0 (Off)
Focus Mode: MF (Manual Focus)
NOTE
Depending on the recording mode, some functions may not be assignable to the
control dial.
Assigning Functions to the Control Dial (Control Dial)
Setting Description
EV Shift Brightness compensation (page 46)
White Balance Hue adjustment (page 40)
Self-timer Self-timer time setting (page 39)
MF
* Focus adjustment (page 42)
Off No setting assigned to the control dial
Procedure
Enter the REC Mode
*
[MENU]
*
r
REC MENU” Tab
*
Self-timer
Press [4] and then use [8] and [2] to select the
r
REC MENU” tab, and then press [SET].
Use [8] and [2] to select “Self-timer” and
then press [6].
Press [MENU].
93
Advanced Settings (REC MENU)
Procedure
Enter the REC Mode * [MENU] *
r
REC MENU” Tab * L/R Key
You can select from among the functions described below and assign one to the [4]
and [6] keys (Key Customize). After you do, you can select either of the functions by
pressing the [4] or [6] key.
Procedure
Enter the REC Mode * [MENU] *
r
REC MENU” Tab *
Double (HDR Art)
See page 62 for details.
Assigning Functions to the [4] and [6] Keys (L/R Key)
Setting [4]/[6] key operation
AF Area Specifying the Auto Focus Area (page 99)
Metering Changes the Metering Mode (page 104)
Face Detection Turns face detection on and off (page 102)
ISO Changes the ISO Sensitivity setting (page 44)
ISO High Limit Specifying ISO Sensitivity Upper Limit (page 98)
Off Cancels [4] and [6] key assignments
Saving a Second Normal Image When Shooting With HDR Art
(Double (HDR ART))
94
Advanced Settings (REC MENU)
Procedure
Enter the REC Mode * [MENU] *
r
REC MENU” Tab * Image Size
The initial factory default image size setting is “16M”.
Selecting “3:2” records images with an aspect ratio of 3:2, which matches the
standard aspect ratio of print paper.
The letters “HDTV” stand for “High Definition Television”. An HDTV screen has an
aspect ratio of 16:9, which makes them wider than the usual 4:3 aspect ratio of
television screens of the past. Your camera can record images that are compatible
with the aspect ratio an HDTV screen.
You should regard the print paper sizes suggested here as guidelines only (200 dpi
print resolution).
To select the snapshot image size (Image Size)
Image Size
(Pixels)
REC Screen
Icon Display
Suggested
Print Size and
Application
Description
16M
(4608
x
3456)
Poster Print
Good detail for better clarity even for
images cropped (page 128) from the
original
3:2
(4608
x
3072)
Poster Print
16:9
(4608
x
2592)
HDTV
10M
(3648
x
2736)
Poster Print
Good detail
5M
(2560
x
1920)
A4 Print
3M
(2048
x
1536)
3.5"×5" Print
Best when preserving memory
capacity is relatively more important
than image quality.
VGA
(640
x
480)
E-Mail
Image files are smaller, which is
better when attaching images to
e-mail. However, images are
relatively coarser.
95
Advanced Settings (REC MENU)
Available image sizes are limited for some functions as noted below.
. Pixels and image size
A digital camera image is a collection of small
dots called “pixels”. The more pixels there are
in an image, the more detail there will be.
However, you generally can do with fewer
pixels when printing an image (L size) through
a print service, attaching an image to e-mail,
when viewing the image on a computer, etc.
The size of an image indicates how many
pixels it contains, and is expressed as
horizontal pixels
x
vertical pixels.
Example:
Note that larger images have more pixels, so they take up more memory space.
For information about image size, image quality, and number of images that can be
stored, see page 188.
For information about movie image size, see page 96.
For information about resizing existing snapshots, see page 128.
16M
This image size cannot be selected when using “High Speed Night
Shot”. Selecting “16M” in another mode and then switching to “High
Speed Night Shot” will cause the image size to change to “10M”
automatically.
3:2,
16:9
These image sizes cannot be selected when using “High Speed CS” or
“High Speed Night Shot”. Selecting “3:2” or “16:9” in another mode and
then switching to “High Speed CS” will cause the image size to change
to “16M” automatically. In the case of “High Speed Night Shot”, the
image size will change to “10M” automatically.
Image size Pixels
16M 4608
x
3456 (Approximately 16 million pixels)
3M 2048
x
1536 (Approximately 3 million pixels)
Pixel
96
Advanced Settings (REC MENU)
Procedure
Enter the REC Mode * [MENU] *
r
REC MENU” Tab *
Image Quality
The “Fine” setting helps to bring out details when shooting a finely detailed image
of nature that includes dense tree branches or leaves, or an image of a complex
pattern.
Memory capacity (the number of images you can record) will be affected by the
quality settings you configure (page 188).
Procedure
Enter the REC Mode * [MENU] *
r
REC MENU” Tab *
Movie Quality
This setting can be used to configure movie image quality settings and to select either
normal movie recording or High Speed Movie recording.
Specifying Snapshot Image Quality (Image Quality)
Setting
REC Screen Icon
Display
Description
Fine Gives image quality priority.
Normal Normal
Movie Image Quality Settings (Movie Quality)
Settings
(Quality
(pixels))
REC Screen
Icon Display
Approximate Data Rate
(Frame Rate)
Description
FHD
14.2 Megabits/second
(30 frames/second)
Select this setting record high-
definition (FHD) movies (page 67).
The aspect ratio of movies
recorded with this setting is 16:9.
HD
10.9 Megabits/second
(15, 20, 30 frames/
second)
Select this setting record high-
definition (HD) movies. The
aspect ratio of movies recorded
with this setting is 16:9.
“HD” appears in place of “FHD”
only when you are shooting with
ART SHOT (page 60). The
frame rate depends on the ART
SHOT scene type.
97
Advanced Settings (REC MENU)
Procedure
Enter the REC Mode * [MENU] *
r
REC MENU” Tab * ISO
For details, see the Control Panel procedure on page 44.
STD
3.9 Megabits/second
(30 frames/second)
Use this setting for standard
movie recording. Recording with
this setting is performed using an
aspect ratio of 4:3.
HS1000
40.0 Megabits/second
(1000 frames/second)
The image size of movies
recorded with this mode depends
on the frame rate (recording
speed (page 67)).
HS480
40.0 Megabits/second
(480 frames/second)
HS240
40.0 Megabits/second
(240 frames/second)
HS120
40.0 Megabits/second
(120 frames/second)
HS30-240
5.4 Megabits/second
(30 frames/second)
40.4 Megabits/second
(240 frames/second)
HS30-120
10.4 Megabits/second
(30 frames/second)
40.4 Megabits/second
(120 frames/second)
Specifying ISO Sensitivity (ISO)
Settings
(Quality
(pixels))
REC Screen
Icon Display
Approximate Data Rate
(Frame Rate)
Description
98
Advanced Settings (REC MENU)
Procedure
Enter the REC Mode * [MENU] *
r
REC MENU” Tab *
ISO High Limit
NOTE
When the “ISO Sensitivity” setting (page 44) is something other than “Auto”, the
“ISO High Limit” setting is ignored, and shooting is performed using the option
selected for the “ISO Sensitivity” setting.
The settings available for “ISO High Limit” become as shown below when shooting
with “High Speed Night Scene” (page 77).
Auto, ISO 1600, ISO 3200, ISO 6400, ISO 12800, ISO 25600
The “ISO High Limit” setting cannot be configured while any one of the BEST
SHOT scenes below is in use.
Premium Auto Pro, M mode, some BEST SHOT scenes
The “ISO 3200” setting cannot be selected while the Multi SR Zoom REC mode is
selected. If “ISO 3200” is selected in another REC mode, switching to Multi SR
Zoom causes the REC mode to change to “ISO 1600”.
Procedure
Enter the REC Mode * [MENU] *
r
REC MENU” Tab * Zoom (SR)
See page 53 for details.
Specifying the ISO Sensitivity Upper Limit (ISO High Limit)
Settings
REC Screen
Icon Display
Description
Auto None
Shoots using the ISO sensitivity setting specified by the
“ISO Sensitivity” setting (page 44).
ISO 200
The setting selected here becomes the ISO sensitivity
upper limit when “Auto” is selected for the “ISO
Sensitivity” setting (page 44).
ISO 400
ISO 800
ISO 1600
ISO 3200
Zooming with Super Resolution (Zoom (SR))
99
Advanced Settings (REC MENU)
Procedure
Enter the REC Mode * [MENU] *
r
REC MENU” Tab * AF Area
You can use the following procedure to change the Auto Focus metering area for
shooting snapshots.
When recording movies, the AF metering area is always “U Spot”.
Auto Focus is disabled when “MF” (Manual Focus) is selected for the focus mode
(page 42), even if you select an AF area.
With some BEST SHOT scenes, there are restrictions on the use of AF area
settings. Because of this, you may not be able to use certain settings or you may
not be able to specify any AF Area setting.
While Face Detection (page 102) is turned on, regardless of the current AF Area
setting, “U Spot” (center) focusing will be used automatically whenever a face
cannot be detected for some reason.
Specifying the Auto Focus Area (AF Area)
Settings Description
š Intelligent
The camera automatically determines the focus point on the
screen and focuses there (intelligent AF).
Face detection (page 102) operates automatically.
U Spot
This mode takes readings of a small area in the center of the
image. This setting works well with focus lock (page 43).
I Multi
When you half-press the shutter button while this setting selected,
the camera will select the optimum Auto Focus area from among
nine possible areas. The focus frame of the area where the
camera focuses will be displayed in green.
O Tracking
When you half-press the shutter button while this setting is
selected, the focus frame will follow the movement of the subject.
U Spot” or O Tracking”
Focus frame
š Intelligent”
Focus frame
I Multi”
Focus frame
100
Advanced Settings (REC MENU)
Procedure
Enter the REC Mode * [MENU] *
r
REC MENU” Tab * Anti Shake
You can turn on the camera’s Anti Shake feature to reduce image blur due to subject
movement or camera movement when shooting a moving subject using telephoto,
when shooting a fast-moving subject, or when shooting under dim lighting conditions.
NOTE
Only camera shake correction can be used during FHD and STD movie recording.
Anti Shake correction is not supported during High Speed Movie or HDR Art Movie
recording.
When Anti Shake is enabled and “Auto” is selected for “ISO” (page 44), ISO
sensitivity, aperture, and shutter speed will not appear on the monitor screen when
you half-press the shutter button. These values will appear in the display of the
image immediately after it is shot.
Shooting with Anti Shake enabled can cause an image to appear somewhat
coarser than normal and can cause slight deterioration of image resolution.
Anti Shake may not be able to eliminate the effects of camera or subject movement
when movement is severe.
Anti Shake may not work properly when the camera is mounted on a tripod. Turn
off Anti Shake.
Even if “Strong” is selected for the Anti Shake setting, some shooting conditions
may make it impossible to achieve the desired Anti Shake results.
Reducing the Effects of Camera and Subject Movement
(Anti Shake)
Settings
REC Screen
Icon Display
Description
Strong
High-level Anti Shake processing that, depending on
the recording mode you are using, can minimize the
effects of hand and subject movement.
This setting can be used while the recording mode is
Program Auto (except for High Speed CS), Premium
Auto Pro or High Speed Anti Shake.
Standard
Dramatically reduces the effects of hand and subject
movement.
Off None Turns off Anti Shake settings.
DEMO
Half-pressing the shutter button demonstrates the
effect of Anti Shake. However, the image is not
recorded.
101
Advanced Settings (REC MENU)
Procedure
Enter the REC Mode * [MENU] *
r
REC MENU” Tab * Lighting
You can use this setting to optimize the balance between bright areas and dark areas
when shooting images.
Procedure
Enter the REC Mode * [MENU] *
r
REC MENU” Tab *
Continuous AF
When shooting a snapshot while “On” is selected for Continuous AF, Auto Focus is
performed and focusing is continually updated until you half-press the shutter button.
Before you half-press the shutter button, the camera focuses at the center of the
screen.
Optimizing Image Brightness (Lighting)
Settings Description
On
Performs brightness correction. When this option is selected, it
takes longer for the image to be stored after the shutter button is
pressed.
Off Does not perform brightness correction.
Shooting with Continuous Auto Focus (Continuous AF)
102
Advanced Settings (REC MENU)
Procedure
Enter the REC Mode * [MENU] *
r
REC MENU” Tab *
Face Detection
When shooting people, the face detection feature detects the faces of up to ten
individuals and adjusts focus and brightness accordingly.
1. Use [8] and [2] to select “On” and then press [SET].
2. Point the camera at the subject(s).
The camera will detect human faces and display a
frame around each one.
3. Half-press the shutter button.
The camera will focus and the frames around the
faces it focuses on will turn green.
4. Press the shutter button the rest of the way down.
Tips for Best Face Detection Results
The camera performs center focus if it cannot detect a face.
Always make sure that Auto Focus (AF) is selected as the focus mode when
shooting with face detection.
Detection of the following types of faces is not supported.
A face that is obstructed by hair, sunglasses, a hat, etc., or a face in dark shade
A profile or a face that is at an angle
A face that is very far away and small, or very close and large
A face in an area that is very dark
A face of a pet or some other non-human subject
IMPORTANT!
Face detection cannot be used in combination with any of the following features.
Some BEST SHOT scenes
Movie Mode (Including some BEST SHOT scenes that support High Speed
Movie recording)
High Speed CS with Prerecord CS (Including some BEST SHOT scenes that
support High Speed CS recording)
The “Focus” setting is always fixed at “AF” (Auto Focus) whenever “Face
Detection” is being used. If you want to change the “Focus” setting, first select “Off”
for “Face Detection”.
Shooting with Face Detection (Face Detection)
103
Advanced Settings (REC MENU)
Procedure
Enter the REC Mode * [MENU] *
r
REC MENU” Tab *
Digital Zoom
Select “On” when you want to use digital zoom (page 50).
Digital zoom is disabled while shooting with the following feature.
High speed movie recording, Some BEST SHOT scenes
Procedure
Enter the REC Mode * [MENU] *
r
REC MENU” Tab *
Wind Noise Cut
Select “On” to reduce wind noise during movie recording. Note, however, that this will
also cause the sound quality to change.
Procedure
Enter the REC Mode * [MENU] *
r
REC MENU” Tab *
Make-up Level
For details, see the Control Panel procedure on page 45.
Turning Digital Zoom On or Off (Digital Zoom)
Reducing Wind Noise during Movie Recording
(Wind Noise Cut)
Recording Beautiful Portraits (Make-up Level)
104
Advanced Settings (REC MENU)
Procedure
Enter the REC Mode * [MENU] *
r
REC MENU” Tab * EV Shift
For details, see the Control Panel procedure on page 46.
Procedure
Enter the REC Mode * [MENU] *
r
REC MENU” Tab *
White Balance
For details, see the Control Panel procedure on page 40.
Procedure
Enter the REC Mode * [MENU] *
r
REC MENU” Tab * Focus
For details, see the Control Panel procedure on page 42.
Procedure
Enter the REC Mode * [MENU] *
r
REC MENU” Tab * Self-timer
For details, see the Control Panel procedure on page 39.
Procedure
Enter the REC Mode * [MENU] *
r
REC MENU” Tab * Metering
For details, see the Control Panel procedure on page 49.
Correcting Image Brightness (EV Shift)
Adjusting White Balance (White Balance)
Selecting a Focus Mode (Focus)
Using the Self-timer (Self-timer)
Specifying the Metering Mode (Metering)
105
Advanced Settings (REC MENU)
Procedure
Enter the REC Mode * [MENU] *
r
REC MENU” Tab *
Flash Intensity
You can specify flash intensity to one of five levels from +2 (brightest flash) to –2
(least bright flash).
Flash intensity may not change when the subject is too far away or too close.
Procedure
Enter the REC Mode * [MENU] *
r
REC MENU” Tab * Sharpness
You can specify one of five sharpness settings from +2 (sharpest) to –2 (least sharp).
Procedure
Enter the REC Mode * [MENU] *
r
REC MENU” Tab * Saturation
You can specify one of five saturation settings from +2 (most saturated) to –2 (least
saturated).
Procedure
Enter the REC Mode * [MENU] *
r
REC MENU” Tab * Contrast
You can specify one of five contrast settings from +2 (most contrast between light and
dark) to –2 (least contrast between light and dark).
Specifying Flash Intensity (Flash Intensity)
Controlling Image Sharpness (Sharpness)
Controlling Color Saturation (Saturation)
Adjusting Image Contrast (Contrast)
106
Advanced Settings (REC MENU)
Procedure
Enter the REC Mode * [MENU] *
r
REC MENU” Tab *
AF Assist Light
Half-pressing the shutter button while this setting is selected
causes the front lamp to light, which provides illumination for
focusing in areas where lighting is dim. Leaving this function
turned off is recommended when shooting portraits from short
distances, etc.
IMPORTANT!
Never look directly into the front lamp while it is lit.
Make sure your finger is not covering the front lamp.
Procedure
Enter the REC Mode * [MENU] *
r
REC MENU” Tab * Grid
Using the Auto Focus Assist Light (AF Assist Light)
Displaying the On-screen Grid (Grid)
The on-screen grid can be displayed on the REC mode
monitor screen for easy vertical and horizontal alignment
when composing images.
Front lamp
107
Advanced Settings (REC MENU)
Procedure
Enter the REC Mode * [MENU] *
r
REC MENU” Tab * Review
While Review is turned on, the camera will display an image for about one second
immediately after it is recorded.
When shooting with some functions while “Type 1” is selected for “Review” will
cause the message “Busy... Please wait...” to appear after you press the shutter
button. Shooting another image is disabled while this message is displayed. Wait a
while until the process being performed is complete.
The Review image may not appear when shooting with some recording modes.
When shooting with “High Speed CS”, “AF-CS”, or “Triple Shot”, the Review image
is displayed as “Type 2” if “Type 1” is selected as the Review image type.
Shooting an “ART SHOT” image while “On” is selected for the “Double (HDR Art)”
setting and Review is enabled will cause both the “ART SHOT” image and the
normal image to be displayed as the Review image.
Procedure
Enter the REC Mode * [MENU] *
r
REC MENU” Tab * Icon Help
While Icon Help is turned on, a textual description will appear on the display for
certain icons when you switch between REC functions.
Functions Supported by Icon Help
Recording mode
Available options for the “L/R Key” and “Control Dial” settings
Exposure warning when shutter button is half-pressed
Turning on Image Review (Review)
Type 1 Displays a full-screen view of the image.
Type 2, Type 3
Displays a partial-screen view of the image. The difference
between Type 2 and Type 3 is the way the image appears on
the display.
Off Turns off review image display
Using Icon Help (Icon Help)
108
Advanced Settings (REC MENU)
Procedure
Enter the REC Mode * [MENU] *
r
REC MENU” Tab * Memory
This setting lets you specify which camera settings should be remembered by the
camera when it is turned off, and restored the next time the camera is turned on. To
have the camera remember a setting, you should enable the setting’s memory. Any
setting whose memory is disabled will be reset to its initial default any time the
camera is turned off.
* Optical zoom setting only.
Configuring Power On Default Settings (Memory)
Setting Disabled (Initial Default Setting) Enabled
High Speed CS Off
Setting at
power off
Flash Auto
Focus AF
ISO Auto
White Balance Auto WB
EV Shift 0.0
AF Area Spot
Metering Multi
Self-timer Off
Flash Intensity 0
Zoom (SR) Single
Digital Zoom On
MF Position Position before manual focus was selected.
Zoom Position
* Full wide
109
Viewing Snapshots and Movies
Viewing Snapshots and Movies
See page 32 for the procedure for viewing snapshots.
1. Press [p] (PLAY) and then use [4] and [6] to display the movie you
want to view.
2. Press [SET] to start playback.
Movie Playback Controls
Playback may not be possible for movies not recorded with this camera.
Viewing Snapshots
Viewing a Movie
Fast forward/fast
reverse
[4] [6] (Playback in progress.)
Each press of either button increases the speed of the
fast forward or fast reverse operation.
To return to normal playback speed, press [2].
Play/pause [SET]
1 frame forward/
back
[4] [6] (Playback paused.)
Holding down either button scrolls continuously.
Volume adjustment
Press [2] and then press [8] [2]
Volume can be adjusted only while movie playback is in
progress.
Information display
on/off
[8] (DISP)
Change to normal
playback speed
during high speed
movie playback
[0] (Movie)
•Press [0] (Movie) again to return to the slow playback
speed. This operation is not supported when playing a
movie shot with “HS30-120” or “HS30-240”.
Zoom
Rotate the zoom controller in the direction of z ([).
You can use [8], [2], [4], and [6] to scroll the zoomed
image on the monitor screen. You can zoom a movie
image up to 4.5 times normal size.
Stop playback [MENU]
Movie icon: »
Image quality
Recording time
110
Viewing Snapshots and Movies
A movie that has been rotated using “Rotation” (page 127) or “Auto Rotate” (page
156) cannot be zoomed.
1. Press [p] (PLAY), and then use [4] and [6] to
display the panorama images you want to
view.
2. Press [SET] to start playback of the panorama.
Panorama playback causes the image to scroll left,
right, up, or down.
Playback Controls
The following functions cannot be performed on a panorama image.
MOTION PRINT, Movie Editing, Trimming, Resize, Lighting, White Balance,
Brightness, Rotation
Viewing a Panorama Image
To start or pause
playback
[SET]
To advance scroll
while paused
[4] [6] (When the slide direction is left or right.)
[8] [2] (When the slide direction is up or down.)
Holding down any button scrolls continuously.
To hide or show
display information
[8] (DISP)
To stop playback [MENU]
111
Viewing Snapshots and Movies
Each time you perform a continuous shutter (CS) operation, the camera creates a CS
group that includes all of the images for that particular CS session. You can use the
following procedure to play back the images in a particular CS group.
1. Press [p] (PLAY) and then use [4] and [6] to display the CS group
whose images you want to view.
2. About one second after you select a CS group, high speed playback of
its images will start automatically.
After playback of a CS Group is complete, the first image of the group will be
displayed on the monitor screen.
Pressing [SET] will pause playback. While playback is paused, you can adjust
the playback speed, specify the playback direction, scroll forward or back,
zoom images, and delete images.
Viewing Continuous Shutter Images
Number of image files in
the CS group
First image in the CS group
CS group icon
Current image number/number of images in the group
CS speed*
Playback guide
* Displayed when the image was shot using “High Speed CS”.
112
Viewing Snapshots and Movies
The following are operations that are supported after you press [SET] to start image
playback.
You can use the following procedures to delete images while playback is in progress
or paused.
. Deleting a Specific CS Group File
1. While CS image playback is in progress or paused (toggle by pressing
[SET]), press [2].
This will display the “CS Frame Edit” menu.
2. Use [8] and [2] to select “Delete” and then press [SET].
3. Use [4] and [6] to display the image you want to delete.
4. Use [8] and [2] to select “Delete” and then press [SET].
To delete other files, repeat steps 3 and 4.
To exit the delete operation, press [MENU].
[4] [6]
During playback, changes the playback direction and playback
speed.
While playback is paused, scrolls forward or back.
Playback speed cannot be adjusted while the displayed image is
zoomed.
[SET] Toggles between pause and play.
Zoom
controller
Zooms the image.
You can use [8], [2], [4], and [6] to scroll the zoomed image
on the monitor screen.
Rotating the zoom controller towards w (]) while an image is
not zoomed will display a menu of images in the current CS
group.
[MENU] Exits CS group playback.
[8] (DISP) Cycles through information display formats.
[2] Displays the “CS Frame Edit” menu.
Deleting Continuous Shutter Images
113
Viewing Snapshots and Movies
. Deleting Multiple Files in a CS Group
1. While CS image playback is in progress or paused (toggle by pressing
[SET]), press [2].
This will display the “CS Frame Edit” menu.
2. Use [8] and [2] to select “Delete” and then press [SET].
3. Use [8] and [2] to select “Delete Frames” and then press [SET].
This displays a file selection screen.
4. Use [8], [2], [4], and [6] to move the selection boundary to the file
you want to delete, and then press [SET].
This will select the check box in the lower left corner of the selected file’s image
and move the blue boundary to the next image.
You can enlarge the selected image before deleting it by rotating the zoom
controller towards z ([).
5. Repeat step 4 to select other files, if you want. After you are finished
selecting files, press [MENU].
6. Use [8] and [2] to select “Yes” and then press [SET].
This deletes the files you selected.
To cancel the delete operation, select “No” in step 6 and then press [SET].
. Deleting All Files in a CS Group
1. While CS image playback is in progress or paused (toggle by pressing
[SET]), press [2].
This will display the “CS Frame Edit” menu.
2. Use [8] and [2] to select “Delete” and then press [SET].
3. Use [8] and [2] to select “Del Group Images” and then press [SET].
4. Use [8] and [2] to select “Yes”, and then press [SET].
114
Viewing Snapshots and Movies
Use the following to divide up a CS Group into individual images.
. Dividing Up a Specific CS Group
1. In the PLAY mode, press [MENU].
2. Press [4], use [8] and [2] to select the “p PLAY MENU” tab, and
then press [SET].
3. Use [8] and [2] to select “Divide Group” and then press [6].
4. Use [8] and [2] to select “Select File”, and then press [SET].
5. Use [4] and [6] to display the CS group you want to divide up.
6. Use [8] and [2] to select “Divide” and then press [SET].
To divide up other CS group files, repeat steps 5 and 6.
. Dividing Up All CS Groups
IMPORTANT!
Once a CS group is divided, it cannot be regrouped.
1. In the PLAY mode, press [MENU].
2. Press [4], use [8] and [2] to select the “p PLAY MENU” tab, and
then press [SET].
3. Use [8] and [2] to select “Divide Group” and then press [6].
4. Use [8] and [2] to select “All Files” and then press [SET].
5. Use [8] and [2] to select “Yes”, and then press [SET].
Dividing Up a CS Group
115
Viewing Snapshots and Movies
Use the following procedure to copy an image in a CS group to a location outside of
the group.
1. While CS image playback is in progress or paused (toggle by pressing
[SET]), press [2].
This will display the “CS Frame Edit” menu.
2. Use [8] and [2] to select “Copy”, and then press [SET].
3. Use [4] and [6] to display the image you want to copy.
4. Use [8] and [2] to select “Copy”, and then press [SET].
NOTE
The functions below cannot be performed on snapshots inside a CS group. Before
using either of these functions, perform the above procedure to copy the image
first.
White Balance, Brightness, Trimming, Rotation, Resize
1. In the PLAY mode, use [4] and [6] to scroll through the images until
the one you want is displayed.
2. Rotate the zoom controller towards z ([) to
zoom.
You can use [8], [2], [4], and [6] to scroll the zoomed
image on the monitor screen. Rotate the zoom controller
towards w to unzoom the image.
When monitor screen contents are turned on, a
graphic in the lower right corner of the screen
shows what part of the zoomed image is currently
displayed.
To exit the zoom screen, press [MENU].
Though the maximum image zoom factor is 8X,
certain image sizes may not allow zooming up to
the full 8X.
Copying a CS Group Image
Zooming an On-screen Image
Image area
Current display area
Zoom factor
116
Viewing Snapshots and Movies
Pressing [SET] will lock the current zoom factor for the on-screen image. You
can then use [4] and [6] to scroll between images, using the same zoom
factor. Pressing [SET] again will unlock the zoom factor and allow you to use
[8], [2], [4] and [6] to move around the currently displayed images. This
function cannot be used while viewing CS group images or movies. Also, CS
group images and movies will not appear when you are scrolling images with
[4] and [6].
1. In the PLAY mode, rotate the zoom controller
towards w (]).
Use [8], [2], [4] and [6] to move the selection
boundary around the image menu.
To view a particular image, use [8], [2], [4], or [6] to
move the selection boundary to the image you want and
then press [SET].
In the case of a movie or a continuous shutter (CS)
file, the first frame of the file will be displayed.
A question mark (?) will be displayed for images that cannot be displayed for
some reason.
1. Use a commercially available HDMI
cable to connect the camera to the
TV.
Use a commercially available HDMI
cable that is marked with the logo shown to the right.
Make sure that the camera is turned off before plugging in or unplugging the
cable. Check the user documentation that comes with the TV for information
about requirements before plugging into or unplugging from the TV.
Displaying the Image Menu
Viewing Snapshots and Movies on a TV Screen
Boundary
117
Viewing Snapshots and Movies
IMPORTANT!
Output to a TV is not supported while the camera is in the REC mode except for
“HDMI TV Output” (page 89).
2. Turn on the TV and select its video input mode.
If the TV has more than one video input, select the one where the camera is
connected.
3. Turn on the camera and press [p] (PLAY).
This will cause an image to appear on the TV screen, without anything appearing
on the camera’s monitor screen.
4. Now you can display images and play back movies as you normally do.
IMPORTANT!
Audio is initially output by the camera at maximum volume. When you first start
displaying images, set the TV volume control at a relatively low level and then
adjust it as required.
NOTE
Use a HDMI cable that with a plug that is compatible with the camera’s HDMI micro
connector on one end, and a plug that is compatible with your TV’s HDMI
connector on the other end.
Proper image and/or audio output and other operations may not be possible with
some devices.
Connecting the camera to the HDMI connector of another device can damage both
the camera and the other device. Never connect two HDMI output connectors to
each other.
Disconnect the HDMI cable when you are not using HDMI output. The camera’s
monitor screen may not operate normally while the HDMI cable is connected.
Audio is stereo.
HDMI connector
HDMI cable
(commercially
available)
HDMI micro connector
HDMI input
HDMI output (micro)
118
Viewing Snapshots and Movies
. Selecting the HDMI Terminal Output Method (HDMI Output)
Procedure
[MENU] *¥ SETTING” Tab * HDMI Output
Use this setting to select the digital signal format when connecting to a TV with an
HDMI cable.
* 1080i corresponds to 1080 60i, but not 1080 50i. Because of this, the required
output method may be 576p when outputting to a digital TV in a PAL reception area
that does not support 1080i 60i. If you are in a PAL reception area and nothing is
displayed automatically, change the setting to 576p.
If an image does not appear when “Auto” is selected as the output method, try
changing this setting to something else.
IMPORTANT!
The “HDMI Output” setting cannot be changed as long as there is an HDMI cable
connection between the camera and a TV. Disconnect the HDMI cable from the
camera to change the “HDMI Output” setting.
Auto
This setting will cause the format to change automatically in accordance
with the connected TV. Normally, you should use this mode.
1080i 1080i format output*
480p 480p format output
576p 576p format output
119
Other Playback Functions (PLAY MENU)
Other Playback Functions (PLAY MENU)
This section explains menu items that you can use to configure settings and perform
other playback operations.
Procedure
[p] (PLAY) * [MENU] *p PLAY MENU” Tab * Slideshow
For information about menu operations, see page 91.
Playing a Slideshow on the Camera (Slideshow)
Start
Starts the slideshow
Images
Specifies the type of images to be included in the slideshow
All images: Snapshots, movies, continuous shutter images
All except
Z
: All non-continuous shutter (CS) images
T
Only: Snapshots only
» Only: Movies only
Time
Time from the start to the end of the slideshow
3 minutes, 5 minutes, 10 minutes, 15 minutes, 30 minutes, 60 minutes
Interval
Amount of time each image remains displayed
Use [8] and [2] to select one of the following settings: 1, 3, 5, 10, 15, 20, or
30 seconds, or “MAX”.
If you specify a value other than “MAX”, movies play from beginning to end.
When the slideshow reaches a movie file while “MAX” is selected, only the first
frame of the movie will be displayed.
120
Other Playback Functions (PLAY MENU)
To stop the slideshow, press [SET] or [MENU]. Pressing [MENU] stops the
slideshow and returns to the menu screen.
Adjust audio volume by pressing [2] and then press [8] or [2] during playback.
All button operations are disabled while the slideshow is transitioning from one
image to another.
The time required for transition from one image to another may be longer in the
case of an image that was not recorded with this camera.
You can replace the built-in slideshow background music with other music from your
computer.
Supported File Types:
PCM format (16-bit, monaural / stereo) WAV files
Sampling Frequencies: 11.025 kHz/22.05 kHz/44.1 kHz
Number of Files: 9
File names: SSBGM001.WAV to SSBGM009.WAV
Create the music files on your computer using the above names.
Regardless of which effect pattern you select, the music files you store in camera
memory are played back in name sequence.
1. Connect the camera to your computer (pages 140, 144).
If you plan to save the music files to the camera’s memory card, make sure the
card is loaded in the camera.
Effect
Select the effect you want.
Pattern 1 to 5: Plays background music and applies an image change effect.
Patterns 2 through 4 have different background music, but they all use the
same image change effect.
Pattern 5 can be used for playback of snapshots only (except for those that
are part of a CS group), and the “Interval” setting is ignored.
The currently selected image change effect setting is disabled automatically
in following cases.
When playing a slideshow for which “» Only” is selected for the “Images”
setting
When the interval setting is “MAX” or 1 second
Before and after playback of a movie
During CS group playback (Except the Pattern 1 effect)
Off: No image change effect or background music
Transferring Music from Your Computer to Camera Memory
121
Other Playback Functions (PLAY MENU)
2. Perform one of the following operations to open the memory card or
built-in memory.
This will cause the camera to be recognized by your computer as a Removable
Disk (Drive).
Windows
1
Windows 8: Desktop * Explorer
Windows 7, Windows Vista: Start * Computer
Windows XP: Start * My Computer
2
Double-click “Removable Disk”.
•Macintosh
1
Double-click the camera’s drive icon.
3. Create a folder named “SSBGM”.
4. Double-click the “SSBGM” folder you created and copy the
background music file to it.
See the user documentation that comes with your computer for information
about moving, copying, and deleting files.
If there are background music files both in built-in memory and on the memory
card loaded in the camera, the files on the memory card take priority.
See page 151 for information about camera folders.
5. Disconnect the camera from the computer (pages 141, 144).
Procedure
[p] (PLAY) * Movie Screen * [MENU] *p PLAY MENU” Tab *
MOTION PRINT
1. Use [4] and [6] to scroll through the movie frames and display the one
you want to use as the image of the MOTION PRINT image.
Holding down [4] or [6] scrolls at high speed.
2. Use [8] and [2] to select “Create” and then press [SET].
Only the frames of movies recorded on this camera can be used in a MOTION
PRINT image.
Creating a Snapshot of Movie Frames (MOTION PRINT)
122
Other Playback Functions (PLAY MENU)
Procedure
[p] (PLAY) * Movie Screen of Movie to be Edited * [MENU] *
p PLAY MENU” Tab * Movie Editing
The Movie Editing feature lets you use one of the following procedures to edit out a
specific part of a movie.
1. Use [8] and [2] to select the editing method you want to use and then
press [SET].
2. Use the following operations to select the frame
(point) from which or to which you want to cut
the movie (the cut point).
3. Press [2] to display the editing menu and specify one or two cut
points.
Editing a Movie on the Camera (Movie Editing)
Previous Cut
Cuts everything from the beginning of the movie up to the
current location.
Intermediate Cut Cuts everything between two points.
Next Cut
Cuts everything from the current location to the end of the
movie.
[4] [6]
During playback, changes the playback
direction and playback speed. While
playback is paused, scrolls forward or back.
[SET] Toggles between pause and play.
Previous Cut
While the frame you want the cut to be up to is
displayed, press [2].
Intermediate Cut
1
While the frame you want the first (From) cut to be is
displayed, press [2].
2
Select another frame.
3
While the frame you want the second (To) cut to be
is displayed, press [2].
Next Cut
While the frame you want the cut to be from is
displayed, press [2].
Cut range (blue)
123
Other Playback Functions (PLAY MENU)
4. Use [8] and [2] to select “Yes” and then press [SET].
The selected cut operation will take considerable time to complete. Don’t try to
perform any camera operation until the “Busy... Please wait...” message
disappears from the monitor screen. Note that a cut operation can take a long
time if the movie being edited is long.
IMPORTANT!
When you edit a movie, only the result is saved. The original movie is not retained.
An editing operation cannot be undone.
NOTE
A movie that is shorter than five seconds cannot be edited.
Editing of movies recorded with a different type of camera is not supported.
You will not be able to edit a movie if the amount of remaining memory capacity is
less than the size of the movie file you want to edit. If there is not enough memory
available, delete files you no longer need to free up more.
Splitting of a movie into two movies and splicing of two different movies into a
single movie are not supported.
You also can start a movie editing operation while the movie you want to edit is
playing back. When playback reaches a frame where you want a cut point to be,
press [SET] to pause playback. Next, press [2] to display the menu of editing
options. Perform editing using the same procedures as described above.
Procedure
[p] (PLAY) * Snapshot Screen * [MENU] *
p PLAY MENU” Tab * Lighting
You can use this setting to adjust the balance between bright areas and dark areas in
existing images in the range of 0 (no optimization) to +2 (bright).
NOTE
Correcting the lighting when shooting produces better results (page 101).
Altering the lighting of an image causes the original image and the new (altered)
version to be stored as separate files.
When you display an altered image on the camera’s monitor screen, the date and
time indicates when the image was originally recorded, not when the image was
altered.
Optimizing Image Brightness (Lighting)
124
Other Playback Functions (PLAY MENU)
Procedure
[p] (PLAY) * Snapshot Screen * [MENU] *
p PLAY MENU” Tab * White Balance
You can use the white balance setting to select a light source type for a recorded
image, which will affect the colors of the image.
NOTE
You also can adjust the white balance when recording images (page 40).
The original snapshot is retained in memory and not deleted.
When you display an altered image on the camera’s monitor screen, the date and
time indicates when the image was originally recorded, not when the image was
altered.
Procedure
[p] (PLAY) * Snapshot Screen * [MENU] *
p PLAY MENU” Tab * Brightness
You can select one of five brightness levels, from +2 (brightest) to –2 (least bright).
NOTE
The original snapshot is retained in memory and not deleted.
When you display an altered image on the camera’s monitor screen, the date and
time indicates when the image was originally recorded, not when the image was
altered.
Adjusting White Balance (White Balance)
Daylight Outdoors, fair weather
Overcast Outdoors, cloudy to rain, in tree shade, etc.
Shade Very high temperature light, such as building shade, etc.
Day White
Fluor
White or day white fluorescent lighting, without suppressing
color cast
Daylight Fluor Daylight fluorescent lighting, while suppressing color cast
Tungsten Suppressing of the appearance of light bulb lighting
Cancel No white balance adjustment
Adjusting the Brightness of an Existing Snapshot
(Brightness)
¤
'
«
125
Other Playback Functions (PLAY MENU)
Procedure
[p] (PLAY) * Snapshot Screen * [MENU] *
p PLAY MENU” Tab * DPOF Printing
See page 133 for details.
Procedure
[p] (PLAY) * [MENU] *p PLAY MENU” Tab * Protect
IMPORTANT!
Note that even if a file is protected, it will be deleted if you perform the format
operation (page 162).
Selecting Images for Printing (DPOF Printing)
Protecting a File Against Deletion (Protect)
Select File
Protects specific files.
1
Use [4] and [6] to select the image that
you want to protect.
To view a particular image, rotate the
zoom controller.
2
Press [SET].
An image that is protected is indicated by
the icon.
3
To protect other files, repeat steps 1 and 2.
To exit the protect operation, press [MENU]. To unprotect a file, select
an protected image and then press [SET].
All Files
Protects all files.
1
Use [8] and [2] to select “All Files: On” and then press [SET].
2
Press [MENU].
To unprotect all files, select “All Files: Off” instead of “All Files: On” in
step 1 above.
126
Other Playback Functions (PLAY MENU)
. To protect a specific image in a CS group
1. While CS image playback is in progress or paused (toggle by pressing
[SET]), press [2].
This will display the “CS Frame Edit” menu.
2. Use [8] and [2] to select “Protect” and then press [SET].
3. Use [8] and [2] to select “Select Frames”, and then press [SET].
4. Use [4] and [6] to select the image that you want to protect, and then
press [SET].
This will protect the image and display the icon.
To view a particular image, rotate the zoom controller.
To unprotect a file, select an protected image and then press [SET].
5. After you are finished, press [MENU] to exit this operation.
IMPORTANT!
Note that even if a file is protected, it will be deleted if you perform the format
operation (page 162).
. To protect all the images in a CS group
1. While CS image playback is in progress or paused (toggle by pressing
[SET]), press [2].
2. Use [8] and [2] to select “Protect” and then press [SET].
3. Use [8] and [2] to select “Frame all”, and then press [SET].
4. Use [8] and [2] to select “All Frames On” and then press [SET].
This will protect all the images in the group and display the icon.
To unprotect all of the images in the group, select “All Frames Off” in step 4
and then press [SET].
IMPORTANT!
Note that even if a file is protected, it will be deleted if you perform the format
operation (page 162).
127
Other Playback Functions (PLAY MENU)
Procedure
[p] (PLAY) * Snapshot Screen * [MENU] *
p PLAY MENU” Tab * Date/Time
When the date and time settings are what you want, align the cursor with “Apply” and
then press [SET] to apply them.
To switch between 12-hour and 24-hour timekeeping, move the cursor to “am (pm)”
and “24h” (one of which will be displayed) and then use [8] and [2] to change the
setting.
NOTE
The date and time stamped into an image using the Time Stamp (page 155) cannot
be edited.
You cannot edit the date and time of an image that is protected.
You can input any date from 1980 to 2049.
Procedure
[p] (PLAY) * Snapshot or Movie Screen * [MENU] *
p PLAY MENU” Tab * Rotation
1. Use [8] and [2] to select “Rotation” and then press [SET].
Each press of [SET] will rotate the displayed image 90 degrees left.
2. When the displayed image is at the orientation you want, press
[MENU].
NOTE
Rotating a CS image causes all of the images in the CS group to be rotated. You
cannot rotate individual component image in a CS group.
Rotation of a panorama image is not supported.
Note that this procedure does not actually change the image data. It simply alters
how the image is displayed on the camera’s monitor screen.
An image that has been protected or zoomed cannot be rotated.
The original (unrotated) version of the image will be displayed on the image menu
screen.
Editing the Date and Time of an Image (Date/Time)
[8] [2] Changes the setting at the cursor location.
[4] [6] Moves the cursor between settings.
Rotating an Image (Rotation)
128
Other Playback Functions (PLAY MENU)
Procedure
[p] (PLAY) * Snapshot Screen * [MENU] *
p PLAY MENU” Tab * Resize
You can reduce the size of a snapshot and save the result as a separate snapshot.
The original snapshot is also retained. You can resize an image to one of three sizes:
10M, 3M, VGA.
Resizing a 3:2 or 16:9 size snapshot will create an image with an aspect ratio of
4:3, with both sides cut off.
The recording date of the resized version of the snapshot will be the same as the
recording date of the original snapshot.
Procedure
[p] (PLAY) * Snapshot Screen * [MENU] *
p PLAY MENU” Tab * Trimming
You can crop a snapshot to trim parts you do not need, and
save the result in a separate file. The original snapshot is
also retained.
Use the zoom controller to zoom the image to the size you
want, use [8], [2], [4], and [6] to display the portion of
the image you want to cut out, and then press [SET].
The image produced by cropping a 3:2 or 16:9 image will
have an aspect ratio of 4:3.
The recording date of the cropped image will be the
same as the recording date of the original snapshot.
Resizing a Snapshot (Resize)
Cropping a Snapshot (Trimming)
Represents
snapshot area
Part of snapshot that is
currently displayed
Zoom factor
129
Other Playback Functions (PLAY MENU)
Procedure
[p] (PLAY) * Snapshot or Movie Screen * [MENU] *
p PLAY MENU” Tab * Copy
Files can be copied from the camera’s built-in memory to a memory card or from a
memory card to built-in memory.
NOTE
You can copy snapshots or movies you recorded with this camera.
Procedure
[p] (PLAY) * [MENU] *p PLAY MENU” Tab * Divide Group
See page 114 for details.
Copying Files (Copy)
Built-in*
Card
Copies all files from built-in camera memory to a memory card.
This option copies all the files in built-in camera memory. It cannot be
used to copy a single file.
Card*
Built-in
Copies a single file on the memory card to camera built-in camera
memory. Files are copied to the folder in built-in memory whose
name has the largest serial number.
You cannot copy a continuous shutter (CS) group image (page
115).
1
Use [4] and [6] to select the file you want to copy.
2
Use [8] and [2] to select “Copy” and then press [SET].
Dividing Up a Continuous Shutter Group (Divide Group)
130
Other Playback Functions (PLAY MENU)
Procedure
[p] (PLAY) * Display CS group. * [MENU] *
p PLAY MENU” Tab * CS Multi Print
1. Use [8] and [2] to select “Create”.
You can use [4] and [6] to select a different CS group, if you want.
2. Press [SET].
This converts the CS group to a 16M (4608
x
3456) image with up to 30 CS
frames (5 vertical
x
6 horizontal).
This camera may not be able to correctly convert a CS group image with
another camera.
The recording date of the converted image will be the same as the recording
date of the original CS group.
When converting a CS group whose images have been rotated by the
“Rotation” feature to a CS Multi Print image, the arrangement of the images in
the CS Multi Print will be different from that of normal (unrotated) CS images.
Procedure
[p] (PLAY) * [MENU] *p PLAY MENU” Tab * CS Frame Edit
See the following pages for details.
DPOF Printing: page 133
Protect: page 125
Copy: page 115
Delete: page 112
Combining CS Images into a Single Still Image
(CS Multi Print)
Editing a CS Image (CS Frame Edit)
131
Printing
Printing
* You can specify which images you want to print, the number of copies, and date
stamp settings before printing (page 133).
You can connect the camera directly to a printer that supports PictBridge and print
images without going through a computer.
. To set up the camera before connecting to a printer
1. Turn on the camera and press [MENU].
2. On the “¥ SETTING” tab, select “USB” and then press [6].
3. Use [8] and [2] to select “PictBridge”, and then press [SET].
Printing Snapshots
Professional Print Service*
You can take a memory card that contains the images you want
to print to a professional print service and have them printed.
Printing on a Home Printer*
Printing Images on a Printer with Memory Card Slot
You can use a printer equipped with a memory card slot
to print images directly from a memory card. For details,
see the user documentation that comes with your
printer.
Connecting Directly to a PictBridge Compatible Printer
You can print on a printer that supports PictBridge (page 131).
Printing with a Computer
After transferring the images to your computer, use
commercially available software to print.
Connecting Directly to a PictBridge Compatible Printer
132
Printing
. Connecting the Camera to a Printer
Use the micro USB cable that comes bundled with the camera to connect the camera
to your printer’s USB port.
For details about connecting to the camera and precautions when connecting, see
page 18.
The camera does not draw power over the USB cable. Check the battery level
before connecting and make sure it is not too low.
Make sure that the camera is turned off before plugging in or unplugging the cable.
Check the user documentation that comes with the printer for information about
requirements before plugging into or unplugging from the printer.
. To print
1. Turn on the printer and load paper.
2. Turn on the camera.
This will display the print menu screen.
3. Use [8] and [2] to select “Paper Size”, and then press [6].
4. Use [8] and [2] to select a paper size and then press [SET].
The following are the available paper sizes.
3.5"×5", 5"×7", 4"×6", A4, 8.5"×11", By Printer
Selecting “By Printer” prints using a paper size selected on the printer.
See the documentation that comes with your printer for information about
paper settings.
USB
Micro USB cable
(included with camera)
USB port
Large connector
Small connector
133
Printing
5. Use [8] and [2] to specify the print option you want.
To toggle date stamping on and off, press [0] (Movie). The date stamp will be
printed when “On” is indicated on the monitor screen.
6. Use [8] and [2] to select “Print” and then press [SET].
Printing will start and the message “Busy... Please wait...” will appear on the
monitor screen. The message will disappear after a short while, even though
printing is still being performed. Pressing any camera button will cause the
printing status to re-appear. The print menu screen will re-appear when printing is
complete.
If you selected “1 Image”, you can repeat the procedure from step 5, if you
want.
7. After printing is complete, turn off the camera and disconnect the USB
cable from the printer and camera.
. Digital Print Order Format (DPOF)
DPOF is a standard that allows you to include image type, number of copy,
and time stamp on/off information on the memory card with the images.
After configuring settings, you can use the memory card to print on a home
printer that supports DPOF or take the memory card to a professional print
service.
Whether or not you will be able to use DPOF settings for printing depends on the
printer you are using.
Some professional print services may not support DPOF.
1 Image : Prints one image. Select and then press [SET]. Next, use [4] and
[6] to select the image you want to print.
DPOF Printing: Prints multiple images. Select and then press [SET]. With this
option, images will be printed in accordance with DPOF settings
(page 133).
Using DPOF to Specify Images to be Printed and the Number
of Copies (DPOF Printing)
134
Printing
. Configuring DPOF Settings Individually for Each Image
Procedure
[p] (PLAY) * Snapshot Screen * [MENU] *
p PLAY MENU” Tab * DPOF Printing * Select images
1. Use [4] and [6] to scroll through the files until the image you want to
print is displayed.
2. Use [8] and [2] to specify the number of copies.
You can specify a value up to 99. Specify 00 if you do not want to print the image.
If you want to include the date in the images, press [0] (Movie) so “On” is
shown for date stamping.
Repeat steps 1 and 2 to configure settings for other images, if you want.
3. Press [SET].
. Configuring the Same DPOF Settings for All the Images
Procedure
[p] (PLAY) * Snapshot Screen * [MENU] *
p PLAY MENU” Tab * DPOF Printing * All images
1. Use [8] and [2] to specify the number of copies.
You can specify a value up to 99. Specify 00 if you do not want to print the image.
Note that the specified number of copies will be printed for all of the images in
any CS group included with the images.
If you want to include the date in the images, press [0] (Movie) so “On” is
shown for date stamping.
2. Press [SET].
135
Printing
. To specify the number of copies for a specific image in a CS group
1. While CS image playback is in progress or paused (toggle by pressing
[SET]), press [2].
This will display the “CS Frame Edit” menu.
2. Use [8] and [2] to select “DPOF Printing” and then press [SET].
3. Use [8] and [2] to select “Select Frames” and then press [SET].
4. Use [4] and [6] to scroll through images until one you want to print is
displayed.
5. Use [8] and [2] to specify the number of copies.
You can specify a value up to 99. Specify 00 if you do not want to print the image.
If you want to include the date in the images, press [0] (Movie) so “On” is
shown for date stamping.
Repeat steps 4 and 5 to configure settings for other images, if you want.
6. Press [SET].
. To configure the same DPOF settings for all the images in a CS
group
1. While CS image playback is in progress or paused (toggle by pressing
[SET]), press [2].
This will display the “CS Frame Edit” menu.
2. Use [8] and [2] to select “DPOF Printing” and then press [SET].
3. Use [8] and [2] to select “Frame all” and then press [SET].
4. Use [8] and [2] to specify the number of copies.
You can specify a value up to 99. Specify 00 if you do not want to print the image.
If you want to include the date in the images, press [0] (Movie) so “On” is
shown for date stamping.
5. Press [SET].
136
Printing
DPOF settings are not cleared automatically after printing is complete.
The next DPOF print operation you execute will be performed using the last DPOF
settings you configured for the images. To clear DPOF settings, specify “00” for the
number of copies of all images.
Tell your print service about your DPOF settings!
If you take a memory card to a professional print service, be sure to tell them that it
includes DPOF settings for the images to be printed and the number of copies. If you
don’t, the print service may print all the images without regard to your DPOF settings,
or they may ignore your date stamp setting.
. Date Stamping
You can use one of the following three methods to include the recording date in the
printout of an image.
Configuring camera settings
Configure DPOF settings (page 133).
You can turn date stamping on and off each time you print. You can configure
settings so some images include the date stamp and some don’t.
Configure the Camera’s Timestamp setting (page 155).
The camera’s Timestamp setting imprints the date into a snapshot when you
shoot it, so the date is always included when you print. It cannot be deleted.
Do not turn on DPOF date stamping for an image that includes a date
stamped with the camera’s Timestamp function. Doing so can cause the two
stamps to be overprinted.
Configuring computer settings
You can use commercially available image management software to date
stamp images.
Professional print service
Request date stamping when ordering prints from a professional print service.
158
Other Settings (SETTING)
Procedure
[MENU] *¥ SETTING” Tab * REC
With “On/Off”, the camera turns off when you press [r] (REC) in the REC mode.
Procedure
[MENU] *¥ SETTING” Tab * PLAY
With “On/Off”, the camera turns off when you press [p] (PLAY) in the PLAY
mode.
Procedure
[MENU] *¥ SETTING” Tab * Delete Key
The camera will not start the image delete operation when you press [2] ( ) while
“Delete Key” is turned on.
You can protect against accidental deletion of images by selecting “Disabled” for
“Delete Key”.
Performing a format operation (page 162) will cause all images to be deleted, even
if file deletion is disabled (“Disabled” selected for “Delete Key”) for some images.
Configuring [r] Setting (REC)
Power On Camera turns on whenever [r] (REC) is pressed.
On/Off Camera turns on or off whenever [r] (REC) is pressed.
Off Camera does not turn on or off when [r] (REC) is pressed.
Configuring [p] Setting (PLAY)
Power On Camera turns on whenever [p] (PLAY) is pressed.
On/Off Camera turns on or off whenever [p] (PLAY) is pressed.
Off Camera does not turn on or off when [p] (PLAY) is pressed.
Disabling File Deletion (Delete Key)
159
Other Settings (SETTING)
Procedure
[MENU] *¥ SETTING” Tab * World Time
You can use the World Time screen to view the current time in a zone that is different
from your Home City when you go on a trip, etc. World Time displays the current time
in 162 cities in 32 time zones around the globe.
1. Use [8] and [2] to select “Destination” and then press [6].
To change the geographic area and city for the time where you normally use
the camera, select “Home”.
2. Use [8] and [2] to select “City” and then press [6].
To change the “Destination” setting to summer time, use [8] and [2] to select
“DST” and then select “On”. Summer time is used in some geographical areas
to advance the current time setting by one hour during the summer months.
3. Use [8] and [2] to select the geographic area you want and then press
[SET].
4. Use [8] and [2] to select the city you want and then press [SET].
5. Press [SET].
IMPORTANT!
Before configuring World Time settings, make sure that the Home City setting is
the place where you live or normally use the camera. If it isn’t, select “Home” on the
screen in step 1 and configure the Home City, date, and time settings as required
(page 160).
Configuring World Time Settings (World Time)
160
Other Settings (SETTING)
Procedure
[MENU] *¥ SETTING” Tab * Adjust
When the date and time settings are what you want, select “Apply” and then press
[SET] to apply them.
To switch between 12-hour and 24-hour timekeeping, move the cursor to “am (pm)”
and “24h” (one of which will be displayed) and then use [8] and [2] to change the
setting.
You can specify a date from 2001 to 2049.
Be sure to select your Home City (page 159) before setting the time and date. If
you set the time and date while the wrong city is selected for your Home City, the
times and dates of all of the World Time cities (page 159) will be wrong.
Procedure
[MENU] *¥ SETTING” Tab * Date Style
You can select from among three different styles for the date.
Example: July 10, 2015
Setting the Camera’s Clock (Adjust)
[8] [2] Change the setting at the cursor location
[4] [6] Move the cursor between settings
Specifying the Date Style (Date Style)
YY/MM/DD 15/7/10
DD/MM/YY 10/7/15
MM/DD/YY 7/10/15
162
Other Settings (SETTING)
Procedure
[MENU] *¥ SETTING” Tab * Format
If a memory card is loaded in the camera, this operation will format the memory card.
It will format built-in memory if no memory card is loaded.
The format operation will delete all contents on the memory card or in built-in
memory. It cannot be undone. Make sure you do not need any data currently on
the card or in built-in memory before you format it.
Formatting built-in memory will delete the following data.
Protected images
“CUSTOM SHOT” setups
Formatting a memory card will delete the following data.
Protected images
Formatting will cause all images to be deleted, even if file deletion is disabled
(“Disabled” selected for “Delete Key” (page 158)) for some images.
Check the battery level before starting a format operation and make sure it is not
too low. Formatting may not be performed correctly and the camera may stop
operating normally if the camera powers down while formatting is in progress.
Never open the battery cover while formatting is in progress. Doing so can cause
the camera to stop operating normally.
Procedure
[MENU] *¥ SETTING” Tab * Reset
See page 177 for details about the camera’s factory default settings.
The settings below are not reset.
World Time settings, clock settings, date style, screen language
Formatting Built-in Memory or a Memory Card (Format)
Resetting the Camera to Factory Defaults (Reset)
163
Appendix
Appendix
*
DANGER
This symbol indicates information that, if ignored or applied incorrectly, creates the
danger of death or serious personal injury.
*
WARNING
This indication stipulates matters that have the risk of causing death or serious injury
if the product is operated incorrectly while ignoring this indication.
*
CAUTION
This indication stipulates matters that have the risk of causing injury as well as
matters for which there is the likelihood of occurrence of physical damage only if the
product is operated incorrectly while ignoring this indication.
Symbol Examples
Safety Precautions
!
This circle with a line through it (-) means that the indicated action must not
be performed. Indications within or nearby this symbol are specifically
prohibited. (The example at left indicates that disassembly is prohibited.)
$
The black dot (0) means that the indicated action must be performed.
Indications within this symbol are actions that are specifically instructed to be
performed. (The example at left indicates that the power plug must be
unplugged from the electrical socket.)
*
DANGER
. Rechargeable Battery
To charge the battery, use only the method specifically described in this
manual. Attempting to charge the battery by an unauthorized means
creates the risk of battery overheating, fire, and explosion.
Do not expose or immerse the battery in fresh water or salt water. Doing
so can damage the battery, and cause deterioration of its performance
and loss of service life.
The battery is intended for use with a CASIO Digital Camera only. Use
with any other device creates the risk of the battery damage, or
deterioration of battery performance and service life.
+
%
+
166
Appendix
Never touch the power plug while your hands are wet. Doing so creates
the risk of electric shock.
Should the power cord or power plug become damage, contact your
retailer or nearest CASIO authorized service center.
Do not use the USB-AC adapter in areas where liquids
* might spill on
them. Liquids create the risk of fire and electric shock.
* Liquids: Water, sports drinks, seawater, animal or pet urine, etc.
Do not place a flower vase or any other liquid container on top of the
USB-AC adapter. Water creates the risk of fire and electric shock.
Do not touch the camera or USB-AC adapter during lightning storms.
If a power cord was included with your camera
The power cord that comes with the camera is designed for use in the
country where the camera was purchased. If you use the camera in
another country, be sure to use a power cord that conforms to that
country’s ratings and power supply voltage. Use of an improper power cord
creates the risk of fire and electric shock.
Before going out, be sure to unplug the USB-AC adapter from the power
outlet and put in a place away from objects used by animals and pets.
An animal or pet chewing on the power cord can cause it short, leading
to the risk of fire.
. Water and Foreign Matter
Water, other liquids, or foreign matter (especially metal) getting inside
the camera creates the risk of fire and electric shock. Immediately
perform the following steps whenever any of the above symptoms are
present. Particular care is required when using the camera where it is raining or
snowing, near the ocean or other body of water, or in a bathroom.
1. Turn off the camera.
2. If you are using the USB-AC adapter to power the camera, unplug the power
plug from the wall outlet. Also, remove the battery from the camera, taking
care to protect yourself against burn injury.
3. Contact your retailer or nearest CASIO authorized service center.
. Disassembly and Modification
Never try to take the camera apart or modify it in any way. Doing so
creates the risk of electric shock, burn injury, and other personal injury.
Be sure to leave all internal inspection, maintenance, and repair up to
your retailer or nearest CASIO authorized service center.
*
WARNING
"
+
-
%
1
+
+
%
!
167
Appendix
. Dropping and Rough Treatment
Continued use of the camera after it is damaged by dropping or other
rough treatment creates the risk of fire and electric shock. Immediately
perform the following steps whenever any of the above symptoms are
present.
1. Turn off the camera.
2. If you are using the USB-AC adapter to power the camera, unplug the power
plug from the wall outlet. Also, remove the battery from the camera, taking
care to protect yourself against burn injury.
3. Contact your retailer or nearest CASIO authorized service center.
. Memory Cards
Memory cards are small and present a risk of accidentally being
swallowed by infants and young children. Keep memory cards out of the
reach of infants and young children. If a memory card is ever swallowed
accidentally, contact a physician immediately.
. Precaution when Camera is On
Do not touch the camera for long periods while it is on. The camera
becomes warm when on, and long term contact creates the risk of low-
temperature burns.
*
CAUTION
. USB-AC Adapter
Misuse of the USB-AC adapter creates the risk of fire and electric shock. Make
sure you observe the following precautions.
Never cover the USB-AC adapter or power cord with a quilt, blanket,
or other cover while it is in use, and do not use it near a heater. Doing
so can interfere with heat radiation and cause the area around them
to become hot.
Do not use detergent when cleaning the power cord, the USB-AC adapter, or
the USB cable (especially the plugs and jacks).
Insert the power plug into the wall outlet as far as it will go.
Unplug the power plug from the wall outlet before leaving the camera
unattended for long periods, such as when leaving on a trip, etc.
At least once a year, use a cloth or vacuum cleaner to clean any dust build up
on the prongs of the power plug and in the area around them.
(Power cord included with your camera) When unplugging from the wall outlet,
never pull on the power cord. Grasp the power plug and pull.
*
WARNING
-
+
+
-
+
170
Appendix
. Data Error Precautions
Your digital camera is manufactured using precision digital components. Any of the
following creates the risk of corruption of data in camera memory.
Removing the battery or memory card while the camera is performing some
operation
Removing the battery or memory card while the back lamp is flashing green after
turning off the camera
Disconnecting the USB cable while communication is in progress
Shooting with a battery that quickly goes low right after it is charged
Shooting with a battery that quickly goes low right after it is charged can also
cause camera malfunction. Replace the battery with a new one immediately.
Other abnormal operations
Any of the above conditions can cause an error message to appear on the monitor
screen (page 186). Perform the action indicated by the message that appears.
. Operating Environment
Operating Temperature Requirements: 0 to 40°C (32 to 104°F)
Operating Humidity: 10 to 85% (non condensation)
Do not place the camera in any of the following locations.
In an area exposed to direct sunlight, or large amounts of moisture, dust, or sand
Near heating or cooling devices, or in other areas subjected to extreme changes
in temperature or humidity
Inside of a motor vehicle on a hot day, or in an area subjected to strong vibration
. Condensation
Sudden and extreme temperature changes, such as when the camera is moved from
the outdoors on a cold winter day into a warm room, can cause water droplets called
“condensation” to form on the interior and the exterior of the camera, which creates
the risk of malfunction. To prevent condensation from forming seal the camera in a
plastic bag before changing locations. Then leave the bag sealed to allow the air
inside to naturally change to the same temperature as the air in the new location.
After that, remove the camera from the bag and open the battery cover for a few
hours.
Precautions During Use
179
Appendix
Displays a histogram on the monitor screen which you can use to
check the exposure of an image before you shoot it. You also can
display the histogram in the PLAY mode for information about the
exposure levels of images.
NOTE
A centered histogram does not necessarily guarantee optimum exposure. The
recorded image may be over-exposed or under-exposed, even though its
histogram is centered.
Due to the limitations of exposure compensation, you may not be able to achieve
an optimum histogram configuration.
Use of the flash and certain shooting conditions can cause the histogram to
indicate exposure that is different from the actual exposure of the image when it is
shot.
The histogram cannot be displayed during high speed movie recording.
. How to Use the Histogram
A histogram is a graph that represents the lightness of an image in terms of the
number of pixels. The vertical axis indicates the number of pixels, while the horizontal
axis indicates lightness. If the histogram appears too lopsided for some reason, you
can use EV shift to move it left or right in order to achieve better balance. Optimum
exposure can be achieved by EV shifting so the graph is as close to the center as
possible. For snapshots, you can even display individual histograms for R (red),
G (green), and B (blue).
Using the On-screen Histogram to Check Exposure
(+Histogram)
Histogram
182
Appendix
The subject is out
of focus in the
recorded image.
The image may not be focused properly. When composing the
image, make sure the subject is located inside the focus frame.
The flash does not
fire.
1)If
?
(Flash Off) is selected as the flash mode, change to
another mode (page 47).
2)If the battery is low, charge it (page 17).
3)If a BEST SHOT scene that uses
?
(Flash Off) is selected,
change to a different flash mode (page 47) or select a
different BEST SHOT scene (page 73).
The red ? (Flash
Off) icon is
displayed on the
monitor screen and
the flash does not
fire.
The flash unit may be malfunctioning. Contact a CASIO
authorized service center or your original retailer. Note that
though the flash will not fire, you still can use the camera for
non-flash shots.
Camera powers
down during Self-
timer countdown.
The battery may be low. Charge the battery.
The monitor screen
image is out of
focus.
1)You may be using Manual Focus and have not focused the
image. Focus the image (page 42).
2)You may be using
´
(Macro) for scenery or portraits. Use
Auto Focus for scenery and portrait shots (page 42).
3)You may be trying to use Auto Focus or
)
(Infinity Focus)
when shooting a close-up shot. Use the
´
(Macro) for close
ups (page 42).
There is digital
noise in images.
1)Sensitivity may have been increased automatically for a dark
subject, which increases the chance of digital noise. Use a
light or some other means to illuminate the subject.
2)You may be attempting to shoot in a dark location with
?
(Flash Off) selected, which can increase digital noise and
make images appear coarse. In this case, turn on flash (page
47) or use lights for illumination.
3)Lighting (page 101) may be enabled for snapshots, which can
cause an increase in digital noise. Use a light or some other
means to illuminate the subject.
4)Shooting movies for long periods in areas where temperature
is relatively high can cause digital noise (dots of light) to
appear in the movie image. If this happens, move to a cooler
environment or turn off the camera and allow it to cool down,
which should cause normal operation to resume.
Problem Possible Cause and Recommended Action
182


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Casio EX-ZR750 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Casio EX-ZR750 in the language / languages: English as an attachment in your email.

The manual is 3,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Casio EX-ZR750

Casio EX-ZR750 User Manual - German - 196 pages

Casio EX-ZR750 User Manual - Dutch - 196 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info