40923

Casio EX-S880 Manual

248
Zoom out
Zoom in
Previous page
1/293
Next page
1
E
EX-S880
K838PCM1DMX
Digital Camera
User’s Guide
Thank you for purchasing this CASIO product.
• Before using it, be sure to read the precautions
contained in this User’s Guide.
• Keep the User’s Guide in a safe place for future
reference.
• For the most up-to-date information about this
product, visit the official EXILIM
Website at http://www.exilim.com/
2
UNPACKING
UNPACKING
As you unpack your camera, check to make sure that all items shown below are included. If anything is missing, contact your original
retailer.
Digital Camera
Rechargeable Lithium Ion Battery
(NP-20)
USB Cradle (CA-37)
Special AC Adaptor (AD-C52G)/AC Power Cord * Strap
USB Cable AV Cable CD-ROMs (2) Basic Reference
* The shape of the AC power
cord plug varies according
to country or geographic
area.
Attach strap here.
To attach the strap to the camera.
3
CONTENTS
CONTENTS
UNPACKING 2
QUICK START BASICS 9
First, charge the battery . . . . . . . . . . . . . . . . . . . . . . 9
Configuring Display Language, Date,
and Time Settings . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Using a Memory Card . . . . . . . . . . . . . . . . . . . . . . . 13
Shooting a Snapshot . . . . . . . . . . . . . . . . . . . . . . . . 15
Viewing Snapshots . . . . . . . . . . . . . . . . . . . . . . . . . 17
Shooting a Movie . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Viewing a Movie . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Deleting a File . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
INTRODUCTION 21
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Read this first! . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Precautions during Use . . . . . . . . . . . . . . . . . . . . . 26
GETTING READY 36
Charging the Battery . . . . . . . . . . . . . . . . . . . . . . . . 36
■ To load the battery 36
■ To charge the battery 37
■ Replacing the Battery 41
■ Battery Precautions 42
Using the Camera in another Country . . . . . . . . . . 43
Turning Power On and Off . . . . . . . . . . . . . . . . . . . 43
Using a Memory Card . . . . . . . . . . . . . . . . . . . . . . . 46
■ Supported Memory Cards 47
■ Loading a Memory Card into the Camera 48
■ Replacing the Memory Card 49
■ Formatting a Memory Card 50
Using On-screen Menus . . . . . . . . . . . . . . . . . . . . . 52
Configuring Monitor Screen Settings . . . . . . . . . . 53
■ Selecting a Screen Layout (Layout) 54
■ Turning Display Information On and Off (Info.) 57
■ Adjusting Monitor Screen Brightness (Brightness) 58
■ Adjusting Monitor Screen Image Quality (Type) 59
If you lose your way... . . . . . . . . . . . . . . . . . . . . . . . 60
4
CONTENTS
SHOOTING A SNAPSHOT 62
Holding the Camera Correctly . . . . . . . . . . . . . . . . 62
Shooting a Snapshot . . . . . . . . . . . . . . . . . . . . . . . . 63
■ Specifying Image Size 66
■ Specifying Image Quality 68
■ Turning Off the AF Assist Lamp 69
■ Snapshot Shooting Precautions 70
■ Auto Focus Restrictions 71
Shooting with Zoom . . . . . . . . . . . . . . . . . . . . . . . . 71
Using Flash . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
Using the Self-Timer . . . . . . . . . . . . . . . . . . . . . . . . 79
Using Continuous Shutter . . . . . . . . . . . . . . . . . . . 81
■ Selecting the Continuous Shutter Mode 82
■ Recording with Normal-speed Continuous Shutter,
High-speed Continuous Shutter,
and Flash Continuous Shutter 82
■ Recording with Zoom Continuous Shutter 83
■ Continuous Shutter Precautions 84
Adding Audio to a Snapshot . . . . . . . . . . . . . . . . . 85
Face Recognition. . . . . . . . . . . . . . . . . . . . . . . . . . . 87
■ Performing a face recognition recording
operation (Normal Mode) 87
■ Using the Family First Mode to Give Priority
to Particular Faces 88
■ Face Recognition Precautions 92
SHOOTING A MOVIE 94
Movie Image Quality . . . . . . . . . . . . . . . . . . . . . . . . 94
Shooting a Movie . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
■ Movie Recording Precautions 96
Using Short Movie . . . . . . . . . . . . . . . . . . . . . . . . . . 97
Using Past Movie . . . . . . . . . . . . . . . . . . . . . . . . . . 100
Shooting a Snapshot while Shooting
a Movie (Snapshot-In-Movie) . . . . . . . . . . . . . . . . 102
USING BEST SHOT 104
Reducing the Effects of Hand and Subject
Movement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110
Taking Bright Images without Flash . . . . . . . . . . 111
Shooting Images of Business Cards
and Documents (Business Shot) . . . . . . . . . . . . . 112
Restoring an Old Photograph. . . . . . . . . . . . . . . . 115
Recording Snapshots into a Multi-image
Layout (Layout Shots) . . . . . . . . . . . . . . . . . . . . . . 117
Auto Tracking a Moving Subject
(Auto Framing) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119
5
CONTENTS
ADVANCED SETTINGS 121
Changing the Focus Mode . . . . . . . . . . . . . . . . . . 121
■ Using Auto Focus 122
■ Using Macro Focus 123
■ Using Fixed Focus (Pan Focus) 129
■ Using Infinity Focus 129
■ Using Manual Focus 129
Correcting Image Brightness (EV Shift) . . . . . . . 131
Controlling White Balance . . . . . . . . . . . . . . . . . . 132
Specifying ISO Sensitivity . . . . . . . . . . . . . . . . . . 135
Specifying the Metering Mode . . . . . . . . . . . . . . . 136
Reducing the Effects of Overexposure and
Underexposure . . . . . . . . . . . . . . . . . . . . . . . . . . . 138
Enhancing Human Skin Textures. . . . . . . . . . . . . 139
Using the Camera’s Color Filter Effects . . . . . . . 139
Controlling Image Sharpness . . . . . . . . . . . . . . . . 140
Controlling Color Saturation . . . . . . . . . . . . . . . . 140
Adjusting Image Contrast . . . . . . . . . . . . . . . . . . . 141
Date Stamping Snapshots . . . . . . . . . . . . . . . . . . 141
Using the On-screen Histogram to
Check Exposure. . . . . . . . . . . . . . . . . . . . . . . . . . . 142
Other Useful Recording Functions . . . . . . . . . . . 144
■ Using Key Customize to Assign Functions
[W] and [X]145
■ Displaying an On-screen Grid 146
■ Displaying the Image You Just Recorded
(Image Review)146
■ Using Icon Help 147
■ Using Mode Memory to Configure Power On
Default Settings 148
■ Resetting the Camera to Its Initial Factory
Defaults 150
VIEWING SNAPSHOTS
AND MOVIES 151
Viewing a Snapshot . . . . . . . . . . . . . . . . . . . . . . . . 151
■ Listening to the Audio of an Audio Snapshot 152
Viewing a Movie . . . . . . . . . . . . . . . . . . . . . . . . . . . 153
■ Playing Back a Movie with Anti Shake 155
Playing a Slideshow on the Camera . . . . . . . . . . 156
Viewing Camera Images on a TV . . . . . . . . . . . . . 162
Zooming the Displayed Image . . . . . . . . . . . . . . . 165
Using the 12-image Screen . . . . . . . . . . . . . . . . . . 166
Using the Calendar Screen . . . . . . . . . . . . . . . . . . 166
Using Image Roulette . . . . . . . . . . . . . . . . . . . . . . 168
6
CONTENTS
EDITING IMAGES 169
Resizing a Snapshot . . . . . . . . . . . . . . . . . . . . . . . 169
Cropping a Snapshot . . . . . . . . . . . . . . . . . . . . . . 170
Keystone Correction . . . . . . . . . . . . . . . . . . . . . . . 171
Using Color Restoration to Correct
the Color of an Old Photograph . . . . . . . . . . . . . . 172
Editing the Date and Time of an Image . . . . . . . . 174
Rotating an Image . . . . . . . . . . . . . . . . . . . . . . . . . 175
Combining Multiple Snapshots into
a Single Image (Layout Print) . . . . . . . . . . . . . . . . 176
Adjusting White Balance of
a Recorded Image . . . . . . . . . . . . . . . . . . . . . . . . . 177
Adjusting Image Brightness . . . . . . . . . . . . . . . . . 178
Reducing the Effects of Underexposure . . . . . . . 179
Editing a Movie on the Camera . . . . . . . . . . . . . . 180
Creating a Snapshot of a Movie Frame
(MOTION PRINT) . . . . . . . . . . . . . . . . . . . . . . . . . . 182
USING AUDIO 184
Adding Audio to a Snapshot. . . . . . . . . . . . . . . . . 184
Recording Audio Only (Voice Recording) . . . . . . 186
MANAGING YOUR FILES 189
Files and Folders . . . . . . . . . . . . . . . . . . . . . . . . . . 189
Protecting a File Against Deletion . . . . . . . . . . . . 190
Using the FAVORITE Folder . . . . . . . . . . . . . . . . . 192
Copying Files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 194
DELETING FILES 196
Deleting a Specific File . . . . . . . . . . . . . . . . . . . . . 196
Deleting All Files . . . . . . . . . . . . . . . . . . . . . . . . . . 197
Deleting FAVORITE Folder Snapshots . . . . . . . . 197
C
7
CONTENTS
OTHER SETTINGS 198
Configuring Camera Sound Settings. . . . . . . . . . 198
Turning the Startup Screen On or Off . . . . . . . . . 200
Specifying the File Name Serial Number
Generation Rule . . . . . . . . . . . . . . . . . . . . . . . . . . . 201
Changing the Camera Date and Time Setting. . . 202
Using World Time . . . . . . . . . . . . . . . . . . . . . . . . . 204
■ Configuring World Time Settings 204
Changing the Display Language . . . . . . . . . . . . . 206
Changing the USB Port Protocol . . . . . . . . . . . . . 207
[ ] (REC) and [ ] (PLAY) Button Settings . . 208
Formatting Built-in Memory . . . . . . . . . . . . . . . . . 209
PRINTING 210
Types of Printing . . . . . . . . . . . . . . . . . . . . . . . . . . 210
Using Professional Print Service . . . . . . . . . . . . . 211
Using Your Printer to Print Images . . . . . . . . . . . 212
Using DPOF to Specify Images to be
Printed and the Number of Copies. . . . . . . . . . . . 215
■ Date Stamping 218
Supported Protocols . . . . . . . . . . . . . . . . . . . . . . . 219
USING THE CAMERA WITH A
COMPUTER 220
What you can do . . . . . . . . . . . . . . . . . . . . . . . . . . 220
Using the Camera with a Windows Computer . . 221
■ Viewing and Storing Images on a Computer 225
■ Transfer of Images from the Camera and
Management of Images on the Computer 232
■ Playing Movies 234
■ Uploading Movie Files to YouTube235
■ Editing a Movie 238
■ Transferring Images to the Camera 239
■ Viewing User Documentation (PDF Files) 242
■ User Registration 243
■ Exiting the CD-ROM Menu 243
Using the Camera with a Macintosh . . . . . . . . . . 243
■ Viewing and Storing Images on a Macintosh 245
■ Transfer of Images from the Camera and
Management of Images on Your Macintosh 250
■ Playing Movies 251
■ Viewing User Documentation (PDF Files) 251
■ Registering as a User 251
Reading Files Directly from a Memory Card . . . . 252
Memory Card Data . . . . . . . . . . . . . . . . . . . . . . . . . 253
8
CONTENTS
TRANSFERRING DOCUMENTS TO
YOUR CAMERA (DATA STORAGE) 257
Transferring Documents to the Camera . . . . . . . 257
■ Transferring documents from a computer
running Windows 257
■ Transferring documents from a Macintosh 259
Viewing a Transferred Document on
the Camera . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 261
■ Rotating a Document Page 262
Managing Document Data on the Camera. . . . . . 264
■ Protecting Document Data 264
■ Deleting Document Data 265
APPENDIX 268
General Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . 268
Monitor Screen Contents . . . . . . . . . . . . . . . . . . . 270
Menu Reference . . . . . . . . . . . . . . . . . . . . . . . . . . . 273
Display Menu Reference . . . . . . . . . . . . . . . . . . . . 277
Indicator Lamps . . . . . . . . . . . . . . . . . . . . . . . . . . . 277
Troubleshooting Guide . . . . . . . . . . . . . . . . . . . . . 280
■ Finding the Problem and Fixing It 280
■ Display Messages 285
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . 287
9
QUICK START BASICS
QUICK START BASICS
(page 36)
■ Loading the Battery into the Camera
1. Open the battery cover.
2. Load the battery into the camera.
3. Close the battery cover.
First, charge the battery
While pressing lightly on
the cover, slide it in the
direction indicated by the
arrow to open.
10
QUICK START BASICS
■ Using the USB Cradle to Charge
1. Plug the USB cradle into a household power
outlet.
2. Place the camera onto the USB cradle.
AC adaptor
AC power cord
[CHARGE] lamp
Red: Charging
Green: Charged (Full)
• It takes about two hours to
achieve a full charge.
11
QUICK START BASICS
(pages 202, 206)
The settings on this page are required the first time you turn on
the camera after purchasing it.
• If you make a mistake when configuring the language, date,
and time settings, you can change the settings (pages 202,
206).
1. Press [ON/OFF] to turn on the camera.
2. Use [S], [T], [W], and [X] to select the
language you want and then press [SET].
3. Use [S], [T], [W], and [X] to select the area
where you will use the camera and then press
[SET].
4. Use [S] and [T] to select the city where you
will use the camera and then press [SET].
5. Use [S] and [T] to select the summer time
(DST) setting you want and then press [SET].
Configuring Display Language, Date, and Time Settings
SET
[ON/OFF] (Power)
[BS]
12
QUICK START BASICS
6. Use [S] and [T] to select the date format and then press [SET].
Example: December 19, 2007
7. Set the date and the time.
Use [W] and [X] to select the setting you want (year, month, day, hour, minute) and then use [S] and [T] to change the setting.
To switch between 12-hour and 24-hour format, press [BS].
8. When settings are completed, press [SET].
9. Press [ON/OFF] to turn off the camera.
• After finishing this procedure, advance to the procedure on the next page.
To display the date like this: Select this option:
07/12/19 YY/MM/DD
19/12/07 DD/MM/YY
12/19/07 MM/DD/YY
13
QUICK START BASICS
(page 46)
■ Loading a Memory Card into the Camera
When a memory card is loaded, the camera stores images you
shoot on the card.
NOT
E
• Though the camera has built-in memory, using a memory
card provides additional capacity you can use to store more
images, high-quality and large-size images, and longer
movies.
• The camera will store images in its built-in memory if there
is no memory card loaded. If you prefer to use built-in
memory, skip this procedure and go to “Shooting a
Snapshot” on page 15.
• For information about memory card capacity, see page
287.
1. Open the battery cover.
2. Load a memory card into the camera.
With the front of the memory card facing upwards (towards
the monitor screen side of the camera), slide it into the card
slot and press until it clicks securely into place.
3. Close the battery cover.
Using a Memory Card
While pressing lightly on the
cover, slide it in the direction
indicated by the arrow to open.
M
EMO
R
Y
CARD
MEMORY
CARD
Front Back
14
QUICK START BASICS
■ Formatting a Memory Card
Before you can use a memory card with your camera, you must
format it.
IMPORTANT!
• Formatting a memory card that already has snapshots or
other files on it, will delete its contents. Normally you do not
need to format a memory card again. However, if storing to
a card has slowed down or if you notice any other
abnormality, re-format the card.
• Be sure to perform the following procedure on the camera
to format the memory card.
1. Press [ON/OFF] to turn on the camera.
2. Press [MENU].
3. Use [W] and [X] to select the “Set Up” tab.
4. Use [T] to select “Format” and then press [X].
5. Press [S] to select “Format” and then press
[SET].
• To cancel formatting, select “Cancel” and then press
[SET].
• Wait until the “Busy... Please wait...” message disappears
from the monitor screen before doing anything else.
“Set Up” Tab
[ON/OFF] (Power)
[MENU]
15
QUICK START BASICS
(page 62)
1. Press [ ] to turn on the camera.
This enters the REC mode and displays “ ” (Auto icon)
on the monitor screen.
2. Point the camera at the subject.
3. While taking care to keep the camera still, half-
press the shutter button.
When the image is in focus, the camera will beep, the
operation lamp will light green, and the focus frame will turn
green.
4. Continuing to keep the camera still, press the
shutter button all the way down.
The recorded image will remain on the display for about one
second, and then it will be stored in memory. After that, the
camera will be ready to shoot the next image.
Shooting a Snapshot
Auto icon
Focus Frame
Shutter Button
[] (REC)
Monitor Screen
Operation Lamp
16
QUICK START BASICS
Snapshot Image Size and Image Quality
Your camera lets you select from among various image size
and quality settings. Note that image size and quality
settings affect how many images can be stored in memory.
• You can change the image size and quality settings as
required to shoot a smaller or lower-resolution image for
attachment to an e-mail message, for publishing on a
website, etc. You can also select an image size that suits
the size of paper you plan to use for printing your images.
For details, see pages 66, 68, and 287.
How do I half-press the shutter button?
The shutter button is designed to stop about half way down
when you press it lightly. Stopping at this point is called a
“half-press”. When you half-press the shutter button, the
camera automatically adjusts exposure and focuses on the
subject it is currently pointed at.
Mastering how much pressure is required for a half-press
and a full-press of the shutter button is an important
technique for good-looking images.
Half-press
Press lightly
until the
button stops.
Beep-beep! Click!
Full-press
All the way
17
QUICK START BASICS
(page 151)
1. Press [ ] to enter the PLAY mode.
If there are multiple images in memory, use [W] and [X] to
scroll through them.
■ To return to the REC mode
Press [ ].
■ Fully pressing the shutter button without
waiting for Auto Focus
Fully pressing the shutter button without waiting for Auto
Focus to operate will record using Quick Shutter (page 128).
Quick Shutter lets you capture exactly the moment you want.
• With Quick Shutter, the camera uses high-speed Auto
Focus, which means you can capture quick moving action
more easily. Note, however, that some images may be out
of focus when Quick Shutter is used.
• Whenever possible, take a little extra time to half-press
the shutter button in order to ensure proper focus.
Viewing Snapshots
[] (PLAY)
[W][X]
18
QUICK START BASICS
(page 94)
1. Press [ ] to enter the REC mode.
2. Press [ ] to start shooting the movie.
“” (movie icon) remains on the monitor screen while
movie recording is in progress.
• Audio is also recorded during movie recording.
3. Press [ ] again to stop recording.
Shooting a Movie
Movie Icon
Remaining Recording Time
Recording Time
[] (REC)
Movie Recording Screen
[]
Movie Image Quality
Your camera lets you select from among six image quality
settings (UHQ, UHQ Wide, HQ, HQ Wide, Normal, LP) for
movies. For best camera performance, use the “HQ” (High
Quality) or “HQ Wide” setting for movie recording.
Movie quality is a standard that determines the detail,
smoothness, and clarity of the image during playback.
Reducing image quality let’s you shoot longer, so you can
switch to “Normal” or “LP” conserve remaining memory
capacity if you start to run low.
For details, see pages 94 and 288.
19
QUICK START BASICS
(page 153)
The film-like frame that appears on the monitor screen indicates
that this is an image from a movie.
1. Press [ ] to enter the PLAY mode.
2. Use [W] and [X] to select the movie you want
to play.
When scrolling through images, a movie is displayed on the
monitor screen by showing its first frame.
3. Press [SET] to start playback.
The monitor screen will return to the image selection screen
in step 2 after the end of the movie is reached.
• During movie playback, you can adjust volume, skip
forward and back, and perform other operations (page
154).
■ To return to the REC mode
Press [ ].
Viewing a Movie
[ ] (PLAY)
[W] [X]
[SET]
“ ” Movie icon
20
QUICK START BASICS
(page 196)
You can use the following procedure to delete files you have
transferred to your computer’s hard disk, images you have
printed, or files you simply no longer need. This frees up
memory for recording more images.
1. Press [ ].
2. Press [T] ( ).
3. Use [W] and [X] to select the snapshot or
movie you want to delete.
4. Press [S] to select “Delete”.
• To cancel the delete operation, select “Cancel”.
5. Press [SET].
This deletes the selected snapshot or movie.
• If you want to delete more, repeat the above procedure
from step 3.
• To quit the delete operation, press [MENU].
Deleting a File
[] (PLAY)
[W] [X]
[T] ( )
[S]
[SET]
21
INTRODUCTION
INTRODUCTION
■ BEST SHOT for beautiful shots simply by
selecting a sample image built into the
camera
Simply select the scene that is
similar to what you want to shoot
(Night Scene Portrait, Flower,
etc.), for instant camera setups.
A dedicated [BS] button gives
you direct access to the BEST
SHOT library of sample scenes.
■ Direct Mode Power On
■ A powerful collection of useful recording
features
• Face recognition during image recording (page 87)
• Reduction of the effects of hand and subject movement using
high shutter speeds and an anti-shake feature (page 110)
• High-sensitivity recording avoids dark images, even when the
flash is not being used (page 111)
• Quick Shutter, which helps you capture exactly the moment
you want (page 128)
• High quality (H.264) movie recording (page 94)
Features
Example: Select for beautiful
portraits.
To record, press [ ] to
power up in the REC
mode.
To view images, press
[ ] to power up in the
PLAY mode.
22
INTRODUCTION
■ Powerful Print Features
• DPOF feature for easy specification of date stamping and the
number of copies (page 215)
• Timestamp feature that stamps the date into the image data
(page 141)
• Support for PictBridge and USB DIRECT-PRINT for easy at-
home printing on a printer that supports one of these
standards, without a computer (page 212)
■ Document transfer to the camera
• Bundled Photo Transport software (page 239) lets you
transfer images saved on your computer or displayed on your
computer screen (website data, maps, etc.) to your camera.
• Bundled CASIO DATA TRANSPORT software lets you
transfer documents from your computer to the camera and
take it along with you (page 257).
■ LCD Panel
The liquid crystal panel of the monitor screen uses high-
precision technology that provides a pixel yield in excess of
99.99%.
This means that some pixels may not light or may remain lit at all
times. This is due to the characteristics of the liquid crystal
panel, and does not indicate malfunction.
Read this first!
23
INTRODUCTION
■ Copyrights
Except for your own personal enjoyment, unauthorized use of
snapshots or movies of images recorded with this camera
without the permission of the applicable right holder is forbidden
by copyright laws. In some cases, shooting of public
performances, shows, exhibitions, etc. may be restricted
entirely, even if it is for your own personal enjoyment.
Regardless of whether such files are purchased by you or
obtained for free, posting them on a website, a file sharing site,
or any other Internet site, or otherwise distributing them to third
parties without the permission of the copyright holder is strictly
prohibited by copyright laws and international treaties.
Uploading or distributing on the Internet images of TV programs,
live concerts, music videos, etc. that were photographed or
recorded by you may infringe upon the rights of others. Note that
CASIO COMPUTER CO., LTD. shall not be held liable for any
use of this product that infringes on the copyrights of others or
that violates copyright laws.
The trademarks and registered trademarks shown below are
used in an editorial fashion in the explanatory text of this manual
without trademark ™ or registered trademark
®
symbols. No
infringement on trademarks is intended.
• The SDHC Logo is a trademark.
• Microsoft, Windows, Internet Explorer, Windows Media,
Windows Vista, and DirectX are either registered trademarks
or trademarks of Microsoft Corporation in the United States
and/or other countries.
• Macintosh, Mac OS, QuickTime, QuickTime logo, and iPhoto
are trademarks of Apple Inc. in the United States and/or other
countries.
• MultiMediaCard is a trademark of Infineon Technologies AG
of Germany, and licensed to the MultiMediaCard Association
(MMCA).
• MMCplus is a trademark of the MultiMediaCard Association.
• Adobe and Reader are either registered trademarks or
trademarks of Adobe Systems Incorporated in the United
States and/or other countries.
• Ulead, Ulead VideoStudio, and Movie Wizard are trademarks
of Ulead Systems, Inc.
• HOTALBUM and the HOT ALBUM logo are registered
trademarks or trademarks of Konica Minolta Photo Imaging,
Inc., and licensed to HOTALBUMcom, Inc.
• YouTube, the YouTube logo and “Broadcast Yourself” are
either registered trademarks or trademarks of YouTube, LLC.
• EXILIM, Photo Loader, Photo Transport, YouTube Uploader
for CASIO, and CASIO DATA TRANSPORT are registered
trademarks or trademarks of CASIO COMPUTER CO., LTD.
24
INTRODUCTION
• Photo Loader with HOT ALBUM was developed based on
HOT ALBUM, which is copyrighted by HOTALBUMcom, Inc.,
and Photo Loader, which is copyrighted by CASIO
COMPUTER CO., LTD. All copyrights and other rights revert
to original copyright holders.
• All other company or product names mentioned herein are
registered trademarks or trademarks of their respective
companies.
Any and all unauthorized commercial copying, distribution, and
copying of the bundled software over a network are prohibited.
This product contains PrKERNELv4
Real-time OS of eSOL Co., Ltd.
Copyright
©
2007 eSOL Co., Ltd.
PrKERNELv4 is a registered
trademark of eSOL Co., Ltd. in Japan.
This product’s YouTube upload functionality is included under
license from YouTube, LLC. The presence of YouTube upload
functionality in this product is not an endorsement or
recommendation of the product by YouTube, LLC.
25
INTRODUCTION
• The contents of this manual are subject to change without
notice.
• The content of this manual has been checked at each step
of the production process. Please contact us if you notice
anything that is questionable, erroneous, etc.
• Any copying of the contents of this manual, either in part or
its entirety, is forbidden. Except for your own personal use,
and other use of the contents of this manual without the
permission of CASIO COMPUTER CO., LTD. is forbidden
under copyright laws.
• CASIO COMPUTER CO., LTD. shall not be held liable for
any damages or loss suffered by you or any third party due
to the use or malfunction of this product.
• CASIO COMPUTER CO., LTD. shall not be held liable for
any damages or loss suffered by you or any third party due
to the use of Photo Loader with HOT ALBUM, Photo
Transport, YouTube Uploader for CASIO, and/or CASIO
DATA TRANSPORT.
• CASIO COMPUTER CO., LTD. shall not be held liable for
any damages or loss caused by deletion of memory contents
due to malfunction, repair, or any other reason.
• Note that the example screens and product illustrations
shown in this manual may differ somewhat by the screens
and configuration of the actual camera.
26
INTRODUCTION
■ Take test shots before shooting the final
shot.
• Before shooting your final image, shoot a test shot to ensure
that the camera is recording correctly.
■ Avoid Use While In Motion
• Never use the camera to record or play back images while
operating an automobile or other vehicle, or while walking.
Looking at the monitor while in motion creates the risk of
serious accident.
■ Directly Viewing the Sun or Bright Light
• Never look at the sun or any other bright light through the
cameras viewfinder. Doing so can damage your eyesight.
■ Flash
• Never use the flash unit in areas where flammable or
explosive gas may be present. Such conditions create the risk
of fire and explosion.
• Never fire the flash in the direction of a person operating a
motor vehicle. Doing so can interfere with the driver’s vision
and creates the risk of accident.
• Never fire the flash too close to the eyes of the subject. Doing
so creates the risk of loss of eyesight.
Precautions during Use
27
INTRODUCTION
■ Display Panel
• Do not apply strong pressure to the LCD panel surface or
subject it to strong impact. Doing so can cause the display
panel glass to crack.
• Should the display panel ever become cracked, never touch
any of the liquid inside the panel. Doing so creates the risk of
skin inflammation.
• Should display panel liquid ever get into your mouth,
immediately rinse your mouth out and contact your physician.
• Should display panel liquid ever get into your eyes or onto
your skin, immediately rinse with clean water for at least 15
minutes and contact your physician.
■ Connections
• Never plug any devices that are not specified for use with this
camera into connectors. Connecting a non-specified device
creates the risk of fire and electric shock.
■ Transport
• Never operate the camera inside of an aircraft or anywhere
else where operation of such devices is restricted. Improper
use creates the risk of serious accident.
■ Smoke, abnormal odor, overheating, and
other abnormalities
• Continued use of the camera while it is emitting smoke or
strange odor, or while it is overheating creates the risk of fire
and electric shock. Immediately perform the following steps
whenever any of the above symptoms are present.
1. Turn off the camera.
2. Remove the battery from the camera, taking care to
protect yourself against burn injury.
3. Contact your dealer or nearest CASIO authorized service
center.
28
INTRODUCTION
■ Water and Foreign Matter
• Water, other liquids, or foreign matter (especially metal)
getting inside the camera creates the risk of fire and electric
shock. Immediately perform the following steps whenever any
of the above symptoms are present. Particular care is
required when using the camera where it is raining or
snowing, near the ocean or other body of water, or in a
bathroom.
1. Turn off the camera.
2. Remove the battery from the camera.
3. Contact your dealer or nearest CASIO authorized service
center.
■ Dropping and Rough Treatment
• Continued use of the camera after it is damaged by dropping
or other rough treatment creates the risk of fire and electric
shock. Immediately perform the following steps whenever any
of the above symptoms are present.
1. Turn off the camera.
2. Remove the battery from the camera.
3. Contact your dealer or nearest CASIO authorized service
center.
■ Keep Away From Fire
• Never expose the camera to fire, which can cause it to
explode and creates the risk of fire and electric shock.
29
INTRODUCTION
■ Disassembly and Modification
• Never try to take the camera apart or modify it in any way.
Doing so creates the risk of electric shock, burn injury, and
other personal injury. Be sure to leave all internal inspection,
maintenance, and repair up to your dealer or nearest CASIO
authorized service center.
■ Locations To Be Avoided
• Never leave the camera in any of the following types of
locations. Doing so creates the risk of fire and electric shock.
–Areas subject to large amounts of humidity or dust
– Food preparation areas or other locations where oil smoke
is present
– Near heaters, on a heated carpet, in areas exposed to
direct sunlight, in a closed vehicle parked in the sun, or
other areas subject to very high temperatures
• Never place the camera on an unstable surface, on a high
shelf, etc. Doing so can cause the camera to fall, creating the
risk of personal injury.
■ Backing Up Important Data
• Always keep backup copies of important data in camera
memory by transferring it to a computer or other storage
device. Note that data can be deleted in the case of camera
malfunction, repair, etc.
■ Memory Protection
• Whenever replacing the battery, be sure to follow the correct
procedure as described in the documentation that comes with
the camera. Incorrectly replacing the b attery can result in
corruption or loss of data in camera memory.
30
INTRODUCTION
■ Rechargeable Battery
• Use only the specified charger unit or the specified device to
charge the battery. Attempting to charge the battery by an
unauthorized means creates the risk of battery overheating,
fire, and explosion.
• Do not expose or immerse the battery in fresh water or salt
water. Doing so can damage the battery, and cause
deterioration of its performance and loss of service life.
• This battery is intended for use with a CASIO Digital Camera
only. Use with any other device creates the risk of the battery
damage, or deterioration of battery performance and service
life.
• Failure to observe any of the following precautions creates
the risk of battery overheating, fire, and explosion.
–Never use or leave the battery near open flame.
– Do not expose batteries to heat or fire.
– Make sure the battery is oriented correctly when it is
connected to the charger unit.
–Never carry or store the battery together with items that can
conduct electricity (necklaces, pencil lead, etc.)
–Never disassemble the battery, pierce it with a needle, or
expose it to strong impact (hit it with a hammer, step on it,
etc.), and never apply solder to it. Never place the battery
into a microwave oven, heater, high-pressure generating
device, etc.
• Should you ever notice leakage, strange odor, heat
generation, discoloration, deformation, or any other abnormal
condition while using, charging, or storing a battery,
immediately remove it from the camera or charger unit and
keep it away from open flame.
• Do not use or leave the battery under direct sunlight, in an
automobile parked in the sun, or in any other area subject to
high temperatures. Doing so can damage the battery, and
cause deterioration of its performance and loss of service life.
• If the battery charging does not end normally within the
specified charging time, stop charging anyway and contact
your local CASIO authorized service center. Continued
charging creates the risk of battery overheating, fire, and
explosion.
• Battery fluid can damage your eyes. Should battery fluid get
into your eyes accidentally, immediately rinse them with clean
tap water and then consult a physician.
• Be sure to read the user documentation that comes with the
camera and special charger unit before using or charging the
battery.
31
INTRODUCTION
• If a battery is to be used by young children, make sure that a
responsible adult makes them aware of the precautions and
proper handling instructions, and make sure that they handle
battery correctly.
• Should fluid from a battery accidentally get onto clothing or
your skin, immediately rinse it off with clean tap water.
Prolonged contact with battery fluid can cause skin irritation.
■ AC Adaptor
• Misuse of the AC adaptor creates the risk of fire and electric
shock. Make sure you observe the following precautions
when using the AC adaptor.
– Use only the AC adaptor specified for this camera.
– Use the AC adaptor to su pply power only to devices that
are specified for use with it.
– Use a 100 to 240V AC (50/60Hz) wall outlet as a power
source.
–Never plug the power cord into a wall outlet that is shared
by other devices, or into a shared extension cord.
• Misuse of the AC adaptor can cause it to become damaged,
creating the risk of fire and electric shock. Make sure you
observe the following precautions when using the AC adaptor.
–Never place heavy objects on the AC adaptor or subject it
to direct heat.
–Never try to modify the AC adaptor or subject it to bending.
– Do not twist or pull on the power cord.
–Should the power cord or plug ever become damaged,
contact your dealer or nearest CASIO authorized service
center.
• Never touch the AC adaptor while your hands are wet. Doing
so creates the risk of electric shock.
32
INTRODUCTION
• Misuse of the AC adaptor creates the risk of fire and electric
shock. Make sure you observe the following precautions
when using the AC adaptor.
–Never locate the power cord near a stove or other heating
device.
– When unplugging from the wall outlet, grasp the plug on
the AC adaptor power cord. Never pull on the power cord.
– Insert the plug into the wall outlet as far as it will go.
–Unplug the AC adaptor from the wall outlet before leaving
the camera unattended for long periods, such as when
leaving on a trip, etc.
– At least once a year, unplug the AC adaptor from the wall
outlet and clean off any dust built up around the prongs.
■ USB Cradle and AC Adaptor Precautions
• Make sure you always remove the camera from the USB
cradle before connecting or disconnecting the AC adaptor.
• Charging, USB data communication, the Photo Stand
operation can cause the AC adaptor to become warm. This is
normal and does not indicate malfunction.
33
INTRODUCTION
■ Battery Life
• Battery continuous operation times provided in this manual
represent the approximate amount of time before the camera
turns off due to low battery power when being powered by the
special battery under normal temperature (23°C (73°F)). They
do not guarantee that you will be able to achieve the indicated
level of operation. Actual battery life is greatly affected by
ambient temperature, battery storage conditions, the amount
of time spent in storage, etc.
• Leaving the camera on can run down battery and cause the
low battery warning to appear. Turn off the camera whenever
you are not using it.
• The low battery warning indicates that the camera is about to
turn off due to low battery power. Charge the battery as soon
as possible. Leaving low or dead batteries in the camera can
lead to battery leakage and data corruption.
■ Data Error Precautions
• Your digital camera is manufactured using precision digital
components. Any of the following creates the risk of
corruption of data in camera memory.
– While the camera is performing an operation, removing the
battery or memory card from the camera, or placing the
camera onto or removing it from the USB cradle
– While the operation lamp is flashing green after turning off
the camera, removing the memory card from the camera or
placing the camera onto or removing it from the USB cradle
– Disconnecting the USB cable, removing the camera from
the USB cradle, or disconnecting the AC adaptor from the
USB cradle while a data communication operation is being
performed
– Using a battery that is low
–Other abnormal operations
Any of the above conditions can cause an error message to
appear on the monitor screen (page 285). Perform the action
indicated by the message that appears.
34
INTRODUCTION
■ Operating Environment
• The operating temperature range of the camera is 0°C to
40°C (32°F to 104°F).
• Do not place the camera in any of the following locations.
– In an area exposed to direct su nlight, or large amounts of
moisture or dust
– Near an air conditioner or in other areas subjected to
extreme temperature or humidity
– Inside of a motor vehicle on a hot day, or in an area
subjected to strong vibration
■ Condensation
• Sudden and extreme temperature changes, such as when the
camera is moved from the outdoors on a cold winter day into
a warm room, can cause water droplets called “condensation”
to form on the interior and the exterior of the camera. Note
that condensation can cause malfunction of the camera. To
avoid condensation, place the camera into a plastic bag
before subjecting it to sudden temperature change. Wait until
the air in the bag has had enough time to become acclimated
to the new temperature before removing the camera. After
that, open the battery cover and leave it open for a few hours.
■ Power Supply
• Use only the special rechargeable lithium ion battery (NP-20)
to power this camera. Use of any other type of battery is not
supported.
• The camera does not have a separate battery for the clock.
The date and time settings of the camera are cleared about
12 hours after power is totally cut off (from both the battery
and USB cradle). If this happens, be sure to reconfigure these
settings after power is restored (page 202).
■ Lens
• Never apply too much force when cleaning the surface of the
lens. Doing so can scratch the lens surface and cause
malfunction.
• You may sometimes notice some distortion in certain types of
images, such as a slight bend in lines that should be straight.
This is due to the characteristics of lens, and does not
indicate malfunction of the camera.
35
INTRODUCTION
■ Caring for your camera
• Fingerprints, dirt, and other foreign matter on the lens surface
can interfere with proper operation of the camera. Avoid
touching the lens surface. To clean the lens surface, use a
blower to blow off dust or foreign matter and then wipe with a
soft, dry cloth.
• Fingerprints, dirt, and other foreign matter on the flash can
interfere with proper operation of the camera. Avoid touching
the flash. If the flash becomes dirty, wipe it clean with a soft,
dry cloth.
• To clean the camera, wipe it with a soft, dry cloth.
■ Monitor Screen Images
• The images that normally appear on the monitor screen
during image playback are smaller than normal, and so you
cannot see all of the detail of the actual image. Your camera
has an image zoom feature (page 165) which you can use to
enlarge the monitor screen image. You can use this feature
for on-the-spot checks of important images.
■ Other Precautions
• The camera becomes slightly warm during use. This is normal
and does not indicate malfunction.
36
GETTING READY
GETTING READY
Your camera is powered by a rechargeable lithium ion battery
(NP-20).
IMPORTANT!
• Use of any type of battery other than NP-20 is not
supported.
To load the battery
1.
Open the battery cover.
While pressing the battery cover, slide it in the direction
indicated by the arrow.
2. Load the battery into the camera.
With the EXILIM logo on the battery facing upwards (in the
direction of the monitor screen), hold the stopper in the
direction indicated by the arrow as you slide the battery into
the camera. Press the battery in until the stopper secures it
in place.
Charging the Battery
NP-20
Stopper
37
GETTING READY
3. Close the battery cover.
Swing the battery cover closed, and then slide it securely
into place as you press it against the camera.
The battery is not fully charged when you use the camera
for the first time after purchasing it. Use the following
procedure to charge it.
To charge the battery
1.
Plug the USB cradle into a household power
outlet.
2. Make sure the camera is turned off.
If the camera is on, be sure to press [ON/OFF] to turn it off
before placing it onto the USB cradle.
AC Adaptor
USB Cradle
AC power cord
[DC IN 5.3V]
38
GETTING READY
3. With the camera positioned so the monitor
screen is facing towards you as shown in the
illustration, place it onto the USB cradle.
The [CHARGE] lamp lights red and charging starts.
• It takes about two hours to achieve a full charge. Actual
charging time depends on current battery capacity,
remaining power, and charging conditions.
When charging is complete
The [CHARGE] lamp, which was lit red during charging,
changes to green.
Remove the camera from the USB cradle and unplug the AC
power cord from the power outlet.
If the [CHARGE] lamp flashes green
This indicates that charging cannot be performed because you
have just finished using the camera, or because the temperature
in your location is too hot or too cold. If this happens, wait until
the camera returns to normal temperature. When the camera
returns to a temperature where charging can be performed, the
[CHARGE] lamp will light red.
Carefully insert the camera
as far as it will go.
Cradle contact
[CHARGE] lamp
Camera contact
39
GETTING READY
If the [CHARGE] lamp flashes red
This indicates that the camera or battery is faulty, or that the
battery is loaded in the camera incorrectly.
Remove the battery from the camera and check if its contacts
are dirty. If they are, wipe them off with a dry cloth and then
reload the battery into the camera. After confirming that the AC
adaptor is plugged into the power outlet and the USB cradle, set
the camera on the cradle again.
IMPORTANT!
• Use only the bundled USB cradle or the separately
available special charger unit (BC-11L) to charge the
special rechargeable lithium ion battery (NP-20). The
battery cannot be charged using any other type of charger
device. Attempting to use a different charger can result in
unexpected accident.
• This camera is designed for use only with the USB cradle
that comes with it. Never try to use any other type of cradle.
• Use only the AC adaptor that comes bundled with the
camera. Never use any other type of AC adaptor. Use of
the separately available AD-C30, AD-C40, AD-C620, or
AD-C630 is not supported.
If an error still continues to occur after you perform the above
steps, it could mean that the battery is faulty. Contact your
nearest CASIO authorized service center.
40
GETTING READY
■ Battery Life and Number of Images between
Charges
See page 291 for details.
■ Battery Power Conservation Tips
• When you do not need to use the flash, select “ ” (flash off)
for the flash setting (page 75).
• Enable the Auto Power Off and the Sleep features to protect
against wasting battery power when you forget to turn off the
camera (page 45).
■ Checking Remaining Battery Power
As battery power is consumed, a battery indicator on the monitor
screen indicates remaining power as shown below.
“ ” indicates that battery power is low. Charge the battery as
soon as possible.
Recording is not possible when “ ” is indicated. Charge the
battery immediately.
Remaining
Power
High Low
Battery
Indicator
Indicator
Color
Light
blue
Orange Red Red
41
GETTING READY
IMPORTANT!
• Due to differences in the power requirements of each
mode, the battery indicator may show a lower level in the
PLAY mode than what it shows in a REC mode. This is
normal, and does not indicate malfunction.
• Leaving the camera for about 12 hours with no power
supplied while the battery is dead will cause its date and
time settings to be cleared. You will have to re-configure
the settings after power is restored.
Replacing the Battery
1.
Open the battery cover.
2. With the camera oriented with its monitor
screen facing upwards as shown in the
illustration, slide the stopper in the direction
indicated by the arrow and hold it there.
• This will cause the battery to come out part way.
3. While still holding the stopper, pull the battery
out the rest of the way.
4. Load a new battery.
Stopper
42
GETTING READY
Battery Precautions
■ Precautions during Use
• Operation provided by a battery under cold conditions is
always less than operation under normal temperatures. This
is due to the characteristics of the battery, not the camera.
• Charge the battery in an area where the temperature is within
the range of 10°C to 35°C (50°F to 95°F). Charging outside
this temperature range can cause charging to take longer
than normal or even cause charging to fail.
• If a battery provides only very limited operation following a full
charge, it probably means that the battery has reached the
end of its service life. Replace the battery with a new one.
■ Storage Precautions
• Though a rechargeable lithium ion battery provides high
capacity in a compact configuration, long-term storage while
charged can cause it to deteriorate.
–If you do not plan to use a battery for some time, fully use
up its charge before storing it.
–Always remove the battery from the camera when you are
not using it. Leaving a battery in the camera can cause it to
discharge and go dead, which will require longer charging
when you need to use the camera.
–Store batteries in a cool, dry place (20°C (68°F) or lower).
43
GETTING READY
Note the following precautions.
• The bundled AC adaptor is designed for operation with any
power supply in the range of 100V to 240V AC, 50/60Hz.
Note, however, that the shape of the power cord plug
depends on each country or geographic area. Before taking
the camera and AC adaptor along on a trip, check with travel
agent about the power supply requirements in your
destination(s).
• Do not connect the AC adaptor to a power supply through a
voltage converter or similar device. Doing so can lead to
malfunction.
■ Extra Batteries
Taking along extra fully charged batteries (NP-20) is
recommended while on a trip in order to avoid not being able to
shoot images due to the battery going dead.
■ Turning Power On
To turn power on and enter the REC mode
Press [ON/OFF] (Power) or [ ] (REC).
To turn power on and enter the PLAY mode
Press [ ] (PLAY).
Pressing a button causes the operation lamp to light green
momentarily and turns on power.
Using the Camera in another Country Turning Power On and Off
[ON/OFF] (Power)Operation Lamp
[] (PLAY) [] (REC)
44
GETTING READY
IMPORTANT!
• Pressing [ON/OFF] or [ ] (REC) to turn on power also
causes the lens to extend. Take care there is nothing
pressing against or hitting the lens. Holding the lens with
your hand so it cannot extend creates the risk of
malfunction.
NOT
E
• Pressing [ ] (PLAY) while in the REC mode switches to
the PLAY mode. The lens retracts about 10 seconds after
switching modes.
• Auto Power Off (page 45) will turn off power automatically if
you do not perform any operation for a preset amount of
time. If this happens, turn power back on.
■ Turning Power Off
Press [ON/OFF] (Power).
NOT
E
• You can configure the camera so power does not turn on
when you press [ ] (REC) or [ ] (PLAY). You can
also configure the camera to turn off when you press [ ]
(REC) or [ ] (PLAY) (page 208).
Turning On Power for the First Time
The first time you load a battery into the camera, a screen
appears for configuring screen text language, date, and time
settings. Use the procedure under “Configuring Display
Language, Date, and Time Settings” (page 11) to configure
the settings correctly.
IMPORTANT!
• Failure to set the date and time will cause the wrong
date and time data to be recorded with images.
• If you make a mistake when configu ring the language,
date, and time settings, you can change the settings
(pages 202, 206).
45
GETTING READY
■ Battery Power Conservation Features
This camera is equipped with a sleep function and auto power
off function to conserve battery power. You can configure these
settings in the REC mode as described below.
• Sleep and Auto Power Off always operate as described below
in the PLAY mode, regardless of their current PLAY mode
settings.
– Sleep does not function in the PLAY mode.
–The Auto Power Off trigger time is always five minutes.
1. Press [MENU].
2. Use [W] and [X] to select the “Set Up” tab.
3. Use [S] and [T] to select the item you want to
configure (“Sleep” or “Auto Power Off”) and
then press [X].
4. Use [S] and [T] to select the sleep or Auto
Power Off trigger time and then press [SET].
Selecting “Off” for the sleep setting disables the sleep
feature.
Feature
Name
Description Settings
Sleep
The monitor screen turns off (goes
into a sleep state) if no operation is
performed for a preset amount of
time. Press any button to turn the
monitor screen back on.
Note that the Sleep feature does not
operate in the PLAY mode.
30 sec
1 min
2 min
Off
Auto Power
Off
Power turns off if no operation is
performed for a preset amount of
time.
1 min
2 min
5 min
46
GETTING READY
NOT
E
• When both sleep and Auto Power Off have the same time
settings, Auto Power Off takes priority.
• Sleep and Auto Power Off are disabled under the following
conditions.
– When there is a connection between the camera and
computer or other device via the USB cradle
–During a slideshow
–During Voice Recording playback or recording
–During movie recording and playback
You can store images you shoot with the camera on a memory
card. It is up to you to purchase a commercially available
memory card. In addition to memory card storage, the camera
also has built-in memory, which is enough to hold a few
snapshots or a short movie. Use built-in memory for test
purposes, emergency use, etc.
NOT
E
• Images can be copied between the camera’s built-in
memory and a memory card (page 194).
• The following data is stored in built-in memory. It cannot be
copied to a memory card.
– Face Recognition data saved with Record Family
– BEST SHOT mode user image information
– FAVORITE folder
– Mode memory settings
–Start-up screen image
Using a Memory Card
B
47
GETTING READY
Supported Memory Cards
Your camera supports use of the
following types of memory cards.
SD Memory Card
SDHC Memory Card
MMC (MultiMediaCard)
MMCplus (MultiMediaCardplus)
• For information about memory card
capacity, see page 287.
Memory Used for Storage
Images recorded while a memory card is loaded are saved to
the memory card. When no memory card is loaded, images are
saved in built-in memory.
• Note that you cannot save images in built-in memory while a
memory card is loaded in the camera.
IMPORTANT!
• See the instructions that come with the memory card for
information about how to use it.
• Certain types of cards can slow down processing speeds. If
you are using a slow memory card, you may not be able to
record a movie using the “UHQ”, “UHQ Wide”, “HQ”, or
“HQ Wide” image quality setting. Because of this, use of a
memory card with a maximum transfer speed of at least
10MB per second is recommended.
• Certain types of memory cards take longer to record data,
which can cause movie frames to be dropped. “ ” and
“ ” flash on the monitor screen during recording to let
you know when a frame has been dropped. Use of a
memory card with a maximum transfer speed of at least
10MB per second is recommended.
• SD memory cards and SDHC memory cards have a write
protect switch. Use it when you need to guard against
accidentally deleting data. Note, however, if you write
protect a memory card you must then turn write protection
off whenever you want to record to the card, format it, or
delete any of its images.
48
GETTING READY
• Electrostatic charge, electrical noise, and other
phenomena can cause data to become corrupted or even
lost. Make sure that you always back up important data on
other media (CD-R, CD-RW, MO disk, hard disk, etc.).
Loading a Memory Card into the Camera
IMPORTANT!
• Make sure you always turn off the camera before loading or
removing a memory card.
• Be sure to orient the card correctly when loading it. Never
try to force a memory card into the slot when you feel
resistance.
1. Open the battery cover.
While pressing the battery cover, slide it in the direction
indicated by the arrow.
49
GETTING READY
2. Load a memory card into the camera.
Positioning the memory card so its front is facing upwards
(towards the monitor screen side of the camera), slide it into
the card slot all the way in until you hear it click securely into
place.
3. Close the battery cover.
Swing the battery cover closed, and then slide it securely
into place as you press it against the camera.
Replacing the Memory Card
1.
Remove the memory card from the camera.
Press the memory card and then release it, so it comes part
way out. Pull the card out the rest of the way by hand.
2. Load the other memory card.
M
EM
O
R
Y
CARD
MEMORY
CARD
Front Back
MEMO
R
Y
CARD
50
GETTING READY
IMPORTANT!
• Never insert anything besides a supported memory card
(page 47) into the memory card slot.
• Should water or any foreign object ever get into the card
slot, immediately turn off the camera, remove the battery,
and contact your retailer or nearest CASIO authorized
service center.
• Never remove a card from the camera while the operation
lamp is flashing green. Doing so can cause the image save
operation to fail and even damage the memory card.
Formatting a Memory Card
Before using a new memory card for the first time, you need to
format it. Once you format a memory card, you will not need to
format it each time you use it.
Formatting a memory card that already has files on it will delete
its contents.
IMPORTANT!
• Note that data deleted by a memory card format operation
cannot be recovered. Double-check to make sure that you
really want to delete all the contents of the memory card
before proceeding with the format operation.
• Even if the file data on a memory card is protected (page
190), formatting the card will delete all its data.
• Be sure to use the camera to format a memory card.
Formatting a memory card on a computer and then using it
in the camera can slow down data processing by the
camera. In the case of an SD memory card or SDHC
memory card, formatting on a computer can result in non-
conformity with the SD format, causing problems with
compatibility, operation, etc.
51
GETTING READY
1. Load the memory card you want to format into
the camera.
2. Turn on the camera and press [MENU].
3. On the “Set Up” tab, select “Format” and then
press [X].
4. Use [S] and [T] to select “Format” and then
press [SET] to start formatting.
After formatting is complete, enter the PLAY mode and
check to make sure the “There are no files.” message
appears on the monitor screen.
• To exit the format operation without formatting, select
“Cancel”.
■ Memory Card Precautions
• If a memory card starts to behave abnormally, you can restore
normal operation by reformatting it. However, it is
recommended that you always take along more than one
memory card whenever using the camera far away from the
home or office.
• If you experience problems while trying to playback recorded
images, try re-formatting the memory card.
• As you record data to and delete data from a memory card a
number of times, it loses its ability to retain data. Because of
this, periodic re-formatting of a memory card is
recommended.
• Make sure that the battery is charged fully before starting a
formatting operation. Formatting may not be performed
correctly and the memory card may be damaged if the
camera powers down while formatting is in progress.
• Never open the battery cover while formatting is in progress.
Doing so can damage the memory card.
52
GETTING READY
The following are menu operations you will need to use to
configure camera settings. Take a few moments to become
familiar with them.
• See “Menu Reference” on page 273 for information about
menu contents.
• You also can use the Operation Panel (page 55) to configure
some of the settings that appear on the menu screen. In any
case where the same setting can be configured both on the
Operation Panel and on the menu screen, the Operation
Panel operation is always shown.
Example Menu Screen
Press [MENU] to display the
menu screen.
• Menu contents are different in
the REC mode and PLAY
mode. This screen shows a
REC mode menu.
Menu Screen Operation Buttons
The following is the procedure for menu operations in the REC
mode.
1. In the REC mode, press [MENU].
This displays the menu screen.
2. Use [W] and [X] to select the tab where the
item you want to configure is located.
Here, we will select the “REC” tab.
3. Use [S] and [T] to
select the item you
want to configure and
then press [X].
Example: Select “Focus” and
then press [X].
Using On-screen Menus
Tabs
Settings
[W] [X] Select tabs. [X] is also used to apply a setting.
[S] [T] Select a setting option.
[SET] Applies the selected settings.
[MENU] Exits the menu screen.
53
GETTING READY
4. Use [S] and [T] to select the setting you want.
5. Apply the setting.
• Pressing [SET] applies the selected setting and exits the
menu screen.
• Pressing [W] instead of [SET] applies the selected setting
and returns to the menu screen. You can then continue
configuring other settings, if you want.
• To select another tab, press [W], use [S] to return to the
tab and then use [W] and [X] to switch to another tab.
You can use the display menu to configure various monitor
screen settings.
• See “Display Menu Reference” on page 277 for information
about display menu contents.
Example Display Menu Screen
• Menu contents are different in
the REC mode and PLAY
mode. This screen shows the
REC mode menu.
Menu Screen Operation Buttons
Configuring Monitor Screen Settings
[W] [X]
Selects a setting option. [X] is also used to apply a
setting.
[S] [T] Selects a setting option.
[SET] Applies the selected settings.
[DISP] Exits the menu screen.
54
GETTING READY
The following is the procedure for menu operations in the REC
mode.
1. In the REC mode, press [DISP].
This will display the display menu screen.
2. Use [W] and [X] to select the setting you want.
3. Use [S] and [T] to select the setting you want.
• If you want to configure other settings, repeat steps 2 and
3.
4. After all the settings are the way you want,
press [SET].
• This will apply the settings and exit the menu screen.
Selecting a Screen Layout (Layout)
The contents of the layout setting menu depend on whether the
camera is in the REC mode or the PLAY mode.
■ REC Mode Screen Layout
For the REC mode, the screen layout settings let you select the
layout of icons.
Layout Type Description
Panel: On
Pressing [SET]
in the REC
mode while
“Panel: On” is
selected as the
layout type will
cause the top
icon of the Operation Panel to become
highlighted (selected). You can then use the
Operation panel to change settings. Since
there are few icons superimposed on the
displayed image, they do not interfere with
recording.
55
GETTING READY
Panel (Operation Panel)
1
Image Size/Quality
*1
(pages 66, 68)
2
Flash mode (page 75)
3
Self-timer (page 79)
4
Face Recognition (page 87)
5
Anti Shake (page 110)
6
ISO sensitivity (page 135)
7
White balance (page 132)
8
EV shift (page 131)
9
Date/Time
*2,*3
(page 202)
Panel: Off
With this option,
the image being
composed
completely fills
the monitor
screen. This
setting is best
when you want to display the subject on a large
16:9 aspect ratio monitor screen (page 67).
Icons are superimposed on the displayed
image.
Layout Type Description
1
9
5
3
4
7
8
2
6
56
GETTING READY
*1Image quality cannot be changed using Panel (Operation
Panel).
*2You can select date or time display.
*3You can use the “Date Style” to select either month/day or
day/month for date display (page 203).
The time display format is always 24 hours, regardless of the
current settings of the camera’s “Adjust” (page 203).
The following procedure shows how to use Panel (Operation
Panel).
1. In the REC mode,
press [SET].
This highlights (selects) the
top icon of the Operation
Panel.
2. Use [S] and [T] to select the icon of the
setting you want to change.
3. Use [W] and [X] to change the setting.
• If you want to configure other settings, repeat steps 2 and
3.
4. After all the settings are the way you want,
press [SET].
• This will apply the settings and return to normal operation
(no Operation Panel icon selected).
IMPORTANT!
• Panel (Operation Panel) is not displayed while Short
Movie, Past Movie, Voice Recording, or Zoom Continuous
Shutter is being used.
57
GETTING READY
■ PLAY Mode Screen Layout
The PLAY mode screen layout settings let you select how
display images are shown on the monitor screen.
Turning Display Information On and Off
(Info.)
With “Info.” you can turn display information on and off. You can
configure separate settings for the REC mode and PLAY mode.
Layout
Type
Description
4:3
With this setting,
100% of the display
image is always
visible. With some
aspect ratios, black
bands may appear
above and below, or
to the left and right of the image.
Wide
With this setting, the
display image is the
maximum possible
size that allows the
entire image to be
displayed
horizontally. With
some aspect ratios, the top and bottom of the image
will be cut off.
Display
Information
Setting
Description
Show
Turns on display
of camera setting
and other
information.
+Histogram
Turns on display
of camera setting
and other
indicators, along
with a histogram
(page 142).
58
GETTING READY
Adjusting Monitor Screen Brightness
(Brightness)
You can use the “Brightness” setting to adjust the brightness of
the monitor screen. This setting is the same in the REC mode
and PLAY mode.
Hide
Turns off display
of all information.
Display
Information
Setting
Description
Brightness
Setting
Description
Auto
With this setting, the camera detects available
light levels and automatically adjusts the
brightness of the monitor screen accordingly.
This is the setting you should normally use.
In the PLAY mode, the brightness of the monitor
screen remains constant even if the available
light level changes.
+2
Brightness that is greater than +1, which makes
the screen easier to view. This setting consumes
more power.
+1
Bright setting for outdoor use, etc. This setting
results in brightness that is greater than the 0
setting.
59
GETTING READY
Adjusting Monitor Screen Image Quality
(Type)
You can use the “Type” setting to adjust the quality of the
monitor screen image. This setting is the same in the REC mode
and PLAY mode.
0
Normal monitor screen brightness for indoor use,
etc.
–1
Low monitor screen brightness for nighttime use,
indoor use under dark conditions, etc.
Brightness
Setting
Description
Quality Setting Description
Dynamic
Increases contrast of the monitor screen
image so the subject stands out for easier
viewing and framing when shooting under
bright conditions.
Vivid
Makes the monitor screen image a bit
brighter than the actual image for more
clarity. Makes recorded image brighter when
showing it to others.
Real
Displays the monitor screen image so it is as
near as possible to the one recorded by the
camera.
60
GETTING READY
Perform one of the following operations if you find that you have
gotten lost while performing button operations during recording
or playback.
REC mode
Night
This setting provides a clearer screen image
when shooting under dark conditions, and
comes in handy when recording at night with
a tripod.
Power Saving
Consumes slightly less power than the other
settings, and extends battery life. Note that
power saving is disabled when “Auto” is
selected for the monitor screen brightness
setting.
Quality Setting Description
If you lose your way...
Current Screen
To return to the normal snapshot
or movie recording screen, press:
Menu screen [MENU] or [ ]
Display Menu screen [DISP] or [ ]
BEST SHOT screen [BS] or [ ]
“There are no files.”
screen
Press [ ].
PLAY mode screen Press [ ].
61
GETTING READY
PLAY mode
Current Screen
To return to the normal playback
screen
Menu screen [MENU] or [ ]
Display Menu screen [DISP] or [ ]
REC mode screen Press [ ]
Delete screen
Press [ ]. You could also select
“Cancel” and then press [SET].
62
SHOOTING A SNAPSHOT
SHOOTING A SNAPSHOT
Holding the camera with one hand can result in accidental hand
movement. Hold the camera securely with both hands when
shooting snapshots.
• To protect against accidentally dropping the camera, attach
the wrist strap and make sure it is around your fingers or wrist
while you are operating the camera.
• The supplied strap is intended for use with this camera only.
Never use it for any other purpose.
• Never swing the camera around by its strap.
IMPORTANT!
• Take care that your fingers and the strap do not cover any
of the areas indicated in the illustration.
Holding the Camera Correctly
Horizontal Vertical
Hold the camera as shown in the
illustration, with your arms firmly
against your sides.
Hold the camera so the
flash is above the lens.
Flash
Microphone
AF Assist/Self-timer Lamp
Lens
63
SHOOTING A SNAPSHOT
NOT
E
• Good-looking images are impossible if you move the
camera when you press the shutter button or while the
Auto Focus operation is being performed. Holding the
camera correctly, carefully press the shutter button and
take care that you do not move the camera as the shutter
releases. This is especially important when available
lighting is low, which slows down the shutter speed.
1. Press [ ] (REC) to
enter the REC mode.
Confirm that the subject
(people, scenery, etc.) and
the Auto icon “ ” are
displayed on the monitor
screen.
If any icon other than the
Auto icon “ ” is displayed,
switch to “Auto” (page 104).
Shooting a Snapshot
Focus Frame
Auto Icon
Remaining Snapshot
Memory Capacity
64
SHOOTING A SNAPSHOT
2. Focus the image.
While the focus frame is aligned with the subject, half-press
the shutter button.
Auto Focus will focus the image automatically, and the focus
frame and operation lamp will turn green. The aperture,
shutter speed, and ISO sensitivity also will be set
automatically.
3. Shoot the image.
When the image is focused, press the shutter button the rest
of the way.
This will shoot the snapshot and save it to the memory card
or the camera’s built-in memory.
Shutter Button
Operation Lamp
Shutter Button
65
SHOOTING A SNAPSHOT
NOT
E
• The aperture value indicates the size of the opening that
lets light into the camera. A larger aperture value indicates
a smaller opening. The camera adjusts this setting
automatically.
• Shutter speed indicates the amount of time that light is
allowed into the camera. A slower shutter speed means
that light is allowed in for a longer time. Shutter speed is
indicated on the monitor screen as seconds (1/1000
second, etc.) The camera adjusts this setting automatically.
If the image does not focus...
If the focus frame stays red and the operation lamp is flashing
green, it means that the image is not in focus (because the
subject is too close, etc.). Point the camera at the subject and try
to focus again.
Checking a Snapshot
A snapshot will remain on the monitor screen for a short while
after you shoot it and then disappear when the camera gets
ready for the next image.
Perform the following operation to view a snapshot after you
shoot it.
Press [ ].
This will display the snapshot you just shot.
Use [W] and [X] to scroll through other images in memory.
To return to the REC mode, press [ ].
66
SHOOTING A SNAPSHOT
■ Fully pressing the shutter button without
waiting for Auto Focus
You can shoot snapshots by pressing the shutter button all the
way without waiting for Auto Focus. What the camera does in
this case depends on whether Quick Shutter (page 128) is on or
off.
When Quick Shutter is turned on
High-speed Auto Focus is enabled, which helps you capture
exactly the moment you want. Quick Shutter comes in handy
when shooting a fast-moving subject.
• Some images may be out of focus when Quick Shutter is
used.
• Quick Shutter is turned on as the initial factory default setting.
When Quick Shutter is turned off
Normal Auto Focus is performed and then the image is
recorded.
• If you keep the shutter button depressed, images will continue
to be shot without focus.
• Whenever possible, take a little extra time to half-press the
shutter button in order to ensure proper focus.
Specifying Image Size
A digital camera image is a collection of small dots (pixels).
The size of an image indicates how many pixels it contains, and
is expressed as horizontal pixels × vertical pixels. The initial
factory default image size setting is 8M (3264 × 2448 pixels).
Note that a larger image takes up more memory.
• For information about image size, image quality, and number
of images that can be stored, see page 287.
This setting applies to snapshots only.
• For information about movie image size, see page 95.
1. In the REC mode, press [SET].
2. Use [S] and [T] to select the top option in the
operation panel (Image Size).
3. Use [W] and [X] to select an image size and
then press [SET].
67
SHOOTING A SNAPSHOT
NOT
E
• The following information changes on the display during
the image size selection operation.
– Image size in pixels (1600 × 1200, etc.)
– Optimum print paper size
– Remaining snapshot memory capacity
• Selecting 3:2 (3264 × 2176 pixels) records images with an
aspect ratio of 3:2, which matches the standard aspect ratio
(3:2) of print paper.
• The letters “HDTV” stand for “High Definition Television”. An
HDTV screen has an aspect ratio of 16:9, which makes them
wider than the usual 4:3 aspect ratio of television screens of
the past. Your camera can record images that are compatible
with the aspect ratio of an HDTV screen.
• VGA (640 × 480 pixels) is the optimum size when attaching
images to e-mail.
• Print paper sizes should be thought of as rough estimates
only (200 dpi print resolution).
Image Size (Pixels) Print Paper Size
Larger
Smaller
8M 3264 × 2448 A3 Print
3:2 3264 × 2176 A3 Print
16:9 3264 × 1840 HDTV
6M 2816 × 2112 A3 Print
4M 2304 × 1728 A4 Print
2M 1600 × 1200 3.5" × 5" Print
VGA 640 × 480E-Mail
68
SHOOTING A SNAPSHOT
Specifying Image Quality
Your camera lets you select “Fine” (maximum image quality),
“Normal”, or “Economy” (maximum memory economy) for the
image quality setting. The initial setting is “Normal”. Select “Fine”
if you want to give priority to image quality, or “Economy” to give
priority to the number of images you can store in memory.
• For information about image size, image quality, and number
of images that can be stored, see page 287.
This setting applies to snapshots only.
• For information about movie image quality, see page 94.
1. In the REC mode, press [MENU].
2. On the “Quality” tab, select “ Quality” and
then press [X].
3. Use [S] and [T] to select the image quality
setting you want and then press [SET].
NOT
E
• The “Fine” setting helps to bring out details when shooting
a finely detailed image of nature that includes dense tree
branches or leaves, or an image of a complex pattern.
69
SHOOTING A SNAPSHOT
Turning Off the AF Assist Lamp
The AF assist lamp emits light that helps the camera focus when
you half-press the shutter button under dark lighting conditions.
The AF assist lamp does not light when lighting is bright.
The initial factory default
setting is AF assist lamp on.
Turning off the AF assist lamp
using the following procedure
is recommended when
shooting the image of a
nearby person.
1. In the REC mode, press [MENU].
2. On the “REC” tab, select “AF Assist Light”
and then press [X].
3. Use [S] and [T] to select “Off” and then press
[SET].
When you want to turn on the AF assist lamp, select “On”
here.
IMPORTANT!
• Do not look directly into the AF assist/self-timer lamp or
point it directly at a person’s eyes.
AF Assist/Self-timer Lamp
70
SHOOTING A SNAPSHOT
Snapshot Shooting Precautions
■ Operation
• While the operation lamp is flashing green, never open the
battery cover or place the camera onto or remove it from the
USB cradle. Doing so can result in incorrect storage of the
image you just shot, damage to other images stored in
memory, malfunction of the camera, etc.
• If unneeded light is shining directly onto the lens, shade the
lens with your hand when shooting an image.
■ Monitor Screen when Shooting Snapshots
• The image that appears on the monitor screen is for image
composition. The actual image will be recorded at the quality
set for the image quality setting.
• Subject brightness conditions can cause monitor screen
response to slow and can cause digital noise in the monitor
screen image.
■ Shooting Indoors under Fluorescent
Lighting
• Minute flickering of fluorescent lighting can affect the
brightness or color of an image.
71
SHOOTING A SNAPSHOT
Auto Focus Restrictions
• Proper focus may not be possible when shooting the following
types of subjects.
– Solid color wall or other very low contrast subject
– Strongly back lit subject
– Very shiny subject
– Blinds or other subject with a repeating horizontal pattern
–Multiple subjects at varying distances from the camera
–Subject in a dark location
–Subject that is too far away for light from the AF assist lamp
to reach
–Fast-moving subject
–Subjects outside the focus range of the camera
• Proper focus may not be possible if the camera is moved
while shooting.
• An image may be out of focus even though the operation
lamp is lit green and the focus frame is green.
If you cannot focus properly, try using focus lock (page 127)
or manual focus (page 129).
Your camera provides you with 3X optical zoom (which changes
the lens focal distance), which can be used in combination with
digital zoom (which digitally process the center portion of the
image to enlarge it) for total zoom capabilities of 12 - 45.2X.
IMPORTANT!
• Generally speaking, the higher the digital zoom factor, the
coarser the image that is recorded. However, digital zoom
can be used up to a certain point without causing
deterioration of the image.
• Digital zoom is not supported while “Timestamp” (page
141) is turned on.
1. Enter the REC mode.
Shooting with Zoom
[ ][ ] Zoom button
72
SHOOTING A SNAPSHOT
2. Press the zoom button to change the zoom
factor.
– For more information, see “Optical Zoom and Digital
Zoom Switch Point” on page 73.
3. Press the shutter button to shoot.
NOT
E
• Performing a zoom operation changes the lens aperture.
• Use of a tripod is recommended to protect against hand
movement when using the telephoto setting (zoom in).
• Optical zoom is disabled while shooting a movie. Digital
zoom only is available while shooting a movie. Make sure
you select the optical zoom setting you want to use before
you press the shutter button to start shooting your movie.
To do this:
Press this side of the
zoom button:
Enlarge the subject and narrow
the range
[ ] (telephoto)
Reduce the size of the subject
and broaden the range
[] (wide angle)
Wide Angle Telephoto
73
SHOOTING A SNAPSHOT
■ Optical Zoom and Digital Zoom Switch Point
If you hold down the [ ] side of the zoom button in step 2 of
the above procedure, the zoom operation will stop when the
optical zoom factor reaches its maximum. Momentarily releasing
the zoom button and then holding down its [ ] side will switch
to digital zoom, which you can use to set an even higher zoom
factor.
• When the zoom pointer moves past the maximum limit of
optical zoom. Also, the zoom bar indicates the approximate
zoom factor.
● Zoom Values for Each Image Size
Digital Zoom Indicator
Zoom Bar
Focus Range
(Displayed when shooting
with Auto Focus, macro, or
manual focus.)
8M1X 3X 12X
3:2 1X 3X 12X
16:9 1X 3X 12X
6M 1X 3.5X 13.7X
4M 1X 4.2X 16.7X
2M 1X 6.1X 24.0X
VGA 1X 15.1X 45.2X
1X 12X to 45.2X*
Zoom Pointer
(Indicates current
zoom.)
Image Deterioration Point
Image starts to deteriorate from here.
* Point factor depends on image size.
Undeteriorated Image Quality
Range
Deteriorated Image Quality
Range
3X to 15.1X*
Optical/Digital Switch Point
Undeteriorated Image
Quality Range
Deteriorated Image
Quality Range
74
SHOOTING A SNAPSHOT
• The image deterioration point depends on the image size
(page 66). The smaller the image size, the higher the zoom
factor you can use before reaching the image deterioration
point.
• Though digital zoom generally causes a deterioration of
image quality, some digital zoom without image deterioration
is possible with image sizes of “6M (2816 × 2112 pixels)” and
smaller. The range in which you can use digital zoom without
image deterioration is indicated on the display. The
deterioration point depends on the image size.
• The digital zoom range of the zoom indicator is shown on the
monitor screen only while “Digital Zoom” is turned on.
■ Turning Off Digital Zoom
You can turn off digital zoom if you want to use optical zoom
only. This will help to avoid deteriorated images due to
accidentally switching over from optical zoom to digital zoom
when shooting snapshots.
1. In the REC mode, press [MENU].
2. On the “REC” tab, select “Digital Zoom” and
then press [X].
3. Use [S] and [T] to select “Off” and then press
[SET].
• If you want to show the entire digital zoom range, select
“On” here.
75
SHOOTING A SNAPSHOT
Perform the following steps to select the flash mode you want to
use.
Approximate Flash Range (ISO Sensitivity: Auto)
• The flash range changes in accordance with optical zoom.
1. In the REC mode, press [T] ( ) once.
2. Use [W] and [X] to select the flash setting you
want and then press [SET].
This causes an indicator identifying the selected flash mode
to appear on the monitor screen.
3. Press the shutter button to shoot.
Using Flash
Flash Setting Description
Auto Flash Flash fires automatically in accordance with
exposure (amount of light and brightness)
conditions.
• Initial factory default setting.
Flash Off Flash does not fire.
Flash On Flash always fires.
• This setting can be used to brighten a
subject that normally comes out dark due
to daylight or backlight (daylight synchro
flash).
Soft Flash Always use soft flash, regardless of
exposure conditions.
• Use this setting when you want to
suppress the flash to avoid reflection, etc.
Red Eye
Reduction
Flash fires automatically in accordance
same conditions as Auto Flash. This setting
can be used to reduce the red eye effect that
occurs in images of people shot with flash.
Wide Angle: 0.15 m to 3.9 m (0.5' to 12.8')
Telephoto : 0.4 m to 2.0 m (1.3' to 6.6')
[T] ( )
Flash mode
B
76
SHOOTING A SNAPSHOT
NOT
E
• When operation panel setting is turned off (page 54), you
can cycle through the flash modes by pressing [T]
().
IMPORTANT!
• When using flash, take
care that the flash window
is not blocked by your
fingers or the camera
strap.
Red-eye reduction
Using the flash to shoot at night or in a dimly lit room can cause
red spots inside the eyes of people who are in the image. This is
caused when the light from the flash reflects off of the retina of
the eye. When red-eye reduction is selected as the flash mode,
the camera fires a pre-flash to cause the irises in the eyes of any
people in the image to close, which reduces the chance of red
eye.
IMPORTANT!
• Note the following important points when using red-eye
reduction.
– Red-eye reduction does not work unless the people in
the image are looking directly at the camera (flash).
Before pressing the shutter button, call out to the
subjects so they all look at the camera.
– Red-eye reduction may not work very well if the subjects
are located far away from the camera.
Flash
77
SHOOTING A SNAPSHOT
■ Checking the Flash Mode
The current flash mode is indicated on the monitor screen and
by the operation lamp when you half-press the shutter button.
• You will not be able to take another flash snapshot until the
operating lamp stops flashing orange, which indicates that
charging is complete.
■ Changing the Flash Intensity
1. In the REC mode, press [MENU].
2. On the “Quality” tab, select “Flash Intensity”
and then press [X].
3. Use [S] and [T] to select the flash intensity
setting you want and then press [SET].
You can set one of five levels, from –2 (weakest) to +2
(strongest).
IMPORTANT!
• Flash intensity may not change when the subject is too far
away or too close.
AF
N
2
“ ” indicates flash will fire.
Operation Lamp
Flashes orange while the flash is charging.
78
SHOOTING A SNAPSHOT
■ Using Flash Assist
The subject in an image will look too dark if flash intensity is not
enough to reach a subject that is too far away. When this
happens, you can use flash assist to supplement the brightness
of the subject so it appears as if flash illumination was sufficient.
Flash assist is turned on as the initial factory default setting.
Use the following procedure to turn off flash assist when you do
not want to use it.
1. In the REC mode, press [MENU].
2. On the “Quality” tab, select “Flash Assist” and
then press [X].
3. Use [S] and [T] to select “Off” and then press
[SET].
When you want to use flash assist, select “Auto” here.
IMPORTANT!
• Flash assist may not produce the desired result for some
types of subjects.
• Any of the following can result in the flash assist effect
being canceled out.
– Changing the flash intensity (page 77)
– Correcting brightness (EV shift) (page 131)
– Changing ISO sensitivity (page 135)
– Changing the contrast setting (page 141)
Flash assist not used
Flash assist used
79
SHOOTING A SNAPSHOT
■ Flash Precautions
• The desired effect may not be obtained when the subject is
too far away or too close.
• Flash charging time depends on operating conditions (battery
condition, ambient temperature, etc.) With a fully charged
battery, it takes anywhere from a few seconds to 7 seconds.
• Shooting with flash turned off when lighting is dim results in a
slow shutter speed, which can cause image blur due to hand
movement. Secure the camera with a tripod, etc.
• With red eye reduction, the flash is fired automatically in
accordance with exposure. It does not fire in areas where
lighting is bright.
• The presence of outdoor sunlight, fluorescent lighting, or
some other light source can cause abnormal image colors.
With the self-timer, pressing the shutter button starts a timer,
and the shutter is released and the image is shot after a fixed
amount of time.
Using the Self-Timer
Self-Timer Type Description
10 sec 10-second self-timer
2 sec
2-second self-timer
• When shooting under conditions that
slow down the shutter speed, you can
use this setting to prevent blur due to
hand movement.
X3
(Triple Self-timer)
This option shoots three images: one
image 10 seconds after the shutter button
is pressed, the next image one second
after the camera gets ready to shoot after
the first image, and the final image one
second after the camera gets ready to
shoot after the second image.
Off Self-timer is disabled.
10
s
2
s
x3
80
SHOOTING A SNAPSHOT
1. In the REC mode, press [SET].
2. Use [S] and [T] to select the third option from
the top in the operation panel (Self-timer).
3. Use [W] and [X] to
select the self-timer
type and then press
[SET].
This causes an indicator
identifying the selected self-
timer type to appear on the
monitor screen.
4. Press the shutter button to shoot.
Using the Self-timer to Shoot an Image
• The image is not shot
right away after you
press the shutter button.
Instead, shooting starts
after the preset time
elapses. The AF Assist/
Self-timer Lamp flashes
while the countdown is
being performed.
• You can interrupt an
ongoing self-timer countdown by fully pressing the shutter
button while the AF Assist/Self-timer Lamp is flashing red.
AF Assist/Self-timer Lamp
81
SHOOTING A SNAPSHOT
NOT
E
• The indicator “1sec” appears on the monitor screen
between Triple Self-timer shots. How long it takes for the
camera to get ready to shoot again after it shoots an image
depends on the image size and quality settings, whether or
not a memory card is loaded in the camera, and the flash
charge condition.
• No self-timer operation can be performed when recording
with the any of the following settings.
– Normal-speed continuous shutter mode or high-speed
continuous shutter mode
– Recording with certain BEST SHOT scenes (Short
Movie, Past Movie, Layout, Auto Framing, Voice
Recording)
• The Triple Self-timer cannot be used when performing the
following recording operations.
– Recording with Flash Continuous Shutter
– Recording with certain BEST SHOT scenes (Business
Cards and Documents, Whiteboard, etc., Old Photo, For
YouTube)
–Movie mode
Your camera has four continuous shutter modes.
Using Continuous Shutter
Continuous
Shutter Mode
Description
Normal Speed
(Normal-speed
Continuous
Shutter)
Continually records images until memory
becomes full.
High Speed
(High-speed
Continuous
Shutter)
Continually records images at a speed
that is faster than Normal-speed
Continuous Shutter, until memory
becomes full. Image size is fixed at 2M
(1600 × 1200 pixels).
Flash Cont.
(Flash Continuous
Shutter)
Use this mode to record up to three
consecutive images, firing the flash for
each one.
B
82
SHOOTING A SNAPSHOT
Selecting the Continuous Shutter Mode
1.
In the REC mode, press [MENU].
2. On the “REC” tab, select “Continuous” and
then press [X].
3. Use [S] and [T] to select the mode you want
and then press [SET].
This enables the continuous shutter mode you selected and
displays its icon on the monitor screen.
To turn off continuous shutter, select “Off”.
Recording with Normal-speed
Continuous Shutter, High-speed
Continuous Shutter, and Flash
Continuous Shutter
1.
Press the shutter button to shoot.
• With Normal-speed continuous shutter and High-speed
continuous shutter, images continue to be shot as long as
you keep the shutter button depressed. Releasing the
shutter button stops shooting.
• Flash continuous shutter can shoot up to three images.
Shooting stops if you release the shutter button before
three images are recorded.
IMPORTANT!
• The speed of normal speed continuous shutter and high-
speed continuous shutter depend on the type of memory
card being used and the amount free space available in
memory. When shooting to built-in memory, continuous
shutter shooting is relatively slow.
Zoom Cont.
(Zoom Continuous
Shutter)
In this mode, you select an area on the
monitor screen with a selection
boundary. Then when you press the
shutter button, the camera records the
monitor screen image and the area
enclosed in the selection boundary,
digitally zoomed to twice its normal size.
Continuous
Shutter Mode
Description
83
SHOOTING A SNAPSHOT
Recording with Zoom Continuous
Shutter
1.
Use [S], [T], [W], and
[X] to move the
selection boundary
around the image of
the subject on the left
side of the monitor
screen until it is
located at the part you want to enlarge, and
then press [SET].
This will enlarge the area within the boundary and display it
in the right side of the monitor screen.
2. Press the shutter button to shoot.
Both the left image and the right image will be recorded.
IMPORTANT!
• Note that with zoom continuous shutter, you do not need to
keep the shutter button depressed.
• Digital zoom is disabled while shooting with zoom
continuous shutter.
• Zoom continuous shutter is not available when the image
size setting is 3:2 or 16:9.
• When the image size setting is 8M or 6M, the size of the
zoomed image produced by zoom continuous shutter is
4M.
• When Auto Focus is selected as the focus mode, the
metering mode automatically switches to “Spot” (pages
125, 136) and locates the Auto Focus area in the center of
the Zoom Continuous Shutter selection boundary.
84
SHOOTING A SNAPSHOT
Continuous Shutter Precautions
• Starting a continuous shutter operation causes the exposure
and focus settings to be fixed at the levels for the first image.
The same settings are applied to all subsequent images.
• Continuous shutter cannot be used in combination with any of
the following features.
– Face recognition
– Some BEST SHOT scenes (Layout, Auto Framing,
Business Cards and Documents, Whiteboard, etc., Old
Photo, Short Movie, Past Movie, For YouTube, Voice
Recording)
–Movie mode
• When using a continuous shutter mode, keep the camera still
until all recording is finished.
• A continuous shutter operation may stop part way through if
memory capacity runs low.
• The continuous shutter rate depends on the current image
size and image quality settings.
• You can select the flash mode you want with normal-speed
continuous shutter mode.
• With high-speed continuous shutter, the flash mode
automatically becomes “ ” (flash off).
• With the flash continuous shutter mode, the flash mode
automatically becomes “ ” (flash on).
• Note that the resolution of images recorded with the high-
speed continuous shutter mode or flash continuous shutter
mode is somewhat lower resolution and more prone to digital
noise than images recorded with the normal-speed
continuous shutter mode.
• “Auto” ISO sensitivity always is used for the high-speed
continuous shutter mode or flash continuous shutter mode,
regardless of the current ISO sensitivity setting.
• With the flash continuous shutter mode, the flash range is
narrower than normal.
85
SHOOTING A SNAPSHOT
You can add an audio recording to snapshots, if you want. Use
this feature to add a verbal explanation or a description of the
mood to a snapshot, or to capture the sounds of the people in
the snapshot.
• You can record up to about 30 seconds of audio for a single
snapshot.
■ Turning on Audio Snapshot
1. In the REC mode, press [MENU].
2. On the “REC” tab, select “Audio Snap” and
then press [X].
3. Use [S] and [T] to select “On” and then press
[SET].
■ Recording Audio for a Snapshot
1. Press the shutter
button to shoot.
This monitor screen will show
the image you just shot,
along with the “ ” icon.
• If you do not want to
record audio at this time,
press [MENU]. This will
display the monitor screen
for shooting the next
image.
2. Press the shutter button to start audio
recording.
3. Press the shutter button again to stop audio
recording.
Recording will stop automatically after about 30 seconds if
you do not press the shutter button.
• To turn off the audio snapshot feature, select “Off” in step
3 of the procedure under “Turning on Audio Snapshot”.
Adding Audio to a Snapshot
Remaining Recording Time
86
SHOOTING A SNAPSHOT
Playing Back Snapshot Audio
Audio snapshots in the PLAY mode are indicated by the “ ”
icon.
Press [SET] while an audio snapshot is displayed to play back
its audio.
• For information about the playback operation, see page 152.
IMPORTANT!
• Take care that you do not
block the camera’s
microphone with your
fingers while recording.
• Good recording results are
not possible when the
camera is too far away
from what you are trying to
record.
NOT
E
• After transferring an audio snapshot to your computer’s
hard disk, you can play back the audio using QuickTime
(pages 234, 251).
• The following shows the formats used for storing audio
snapshot data.
– Image Data: JPEG (.JPG extension)
–Audio Data: WAVE/ADPCM (.WAV extension)
– Approximate Audio File Size: 165 KB (30-second
recording at 5.5 KB per second)
• You cannot turn off the monitor screen by pressing [DISP]
while audio recording is in progress.
• Audio snapshot capabilities are disabled while shooting
with the Triple Self-timer or with a continuous shutter mode.
You can, however, add audio to such a snapshot after you
record it (page 184).
Microphone
87
SHOOTING A SNAPSHOT
The face recognition feature gives priority to the human faces in
an image for focus and brightness settings. The following
describes to two available face recognition modes.
Performing a face recognition recording
operation (Normal Mode)
1.
Enter a REC mode.
2. Press [S] ( ) once.
3. Use [W] and [X] to select “ Face Detection:
Normal” and then press [SET].
Face Recognition
Face
Recognition
Mode
Description
Normal mode
Detects human faces and adjusts focus and
brightness accordingly.
• When multiple faces are detected, image is
given to any relatively large face located in
the center of the image.
Family First
mode
Detects human faces. When multiple faces are
detected, this mode gives setting priority to the
faces of family members whose faces have
been registered using Record Family.
[S] ( )
88
SHOOTING A SNAPSHOT
4. Point the camera at the
subjects.
The camera will detect the
faces of any people in the
image. The detected faces all
will be bounded by frames
after detection is complete.
5. Half-press the shutter button.
The focus frame of the face that is focused becomes green.
6. When you are ready to shoot, press the
shutter button the rest of the way.
The camera will adjust its settings so the framed faces are
of proper brightness.
NOT
E
• Half pressing the shutter button to perform face recognition
while “ (Tracking)” (page 125) is selected for the AF
area will cause the focus frame to follow the movement of
the face.
Using the Family First Mode to Give
Priority to Particular Faces
■ Using Record Family to Pre-record Face
Data
To use the Family First mode, you need to pre-record facial data
for the friends and family members to which you want to give
priority.
1. Enter a REC mode.
2. Press [S] ( ) once.
3. Use [W] and [X] to select “ Record Family”
and then press [SET].
4. Point the straight at
the person whose face
you want to record,
adjust as required to
the face fits within the
frame on the monitor
screen, and then press
the shutter button.
89
SHOOTING A SNAPSHOT
5. When the message “Face recognition
successful!” appears, use [S] and [T] to
select “Save” and then press [SET].
This will record the face data and return to the recording
screen.
• To re-record the face data, select “Cancel”.
NOT
E
• You can have up to six sets of face data recorded in the
camera.
• Face data is stored in the camera’s built-in memory, in a
folder named “FAMILY” (page 253). Any manipulation of
the data in the “FAMILY” folder can cause the camera to
stop operating properly. Never delete or edit any data in the
“FAMILY” folder.
■ Using Edit Family to Assign a Priority Level
to Recorded Face Data
After recording face data, you can assign a name and a priority
level that controls how the data is applied when shooting a
snapshot.
1. Enter a REC mode.
2. Press [S] ( ) once.
3. Use [W] and [X] to
select “ Edit
Family” and then press
[SET].
This display the face data
editing screen.
4. Use [S], [T], [W], and [X] to select the face
data you want to edit, and then press [SET].
90
SHOOTING A SNAPSHOT
5. Use [W] and [X] to select a name, and then
press [T].
• You can select any one of 12 preset names to face data.
6. Use [W] and [X] to select the priority level you
want and then press [SET].
• You can select any one of four levels, from “ ”
(Lowest) to “ ” (Highest). Selecting “ ”
(Disabled) will disable face recognition.
Deleting recorded face data
Perform the following steps when you want to delete recorded
face data.
1. Enter a REC mode.
2. Press [S] ( ) once.
3. Use [W] and [X] to select “ Edit Family”
and then press [SET].
4. Press [MENU].
5. Use the procedures under “Deleting a Specific
File” (page 196) and “Deleting All Files” (page
197) to delete the face data you want.
• You can exit this procedure by pressing [MENU].
NOT
E
• Formatting the camera’s built-in memory (page 209)
deletes all the recorded face data.
91
SHOOTING A SNAPSHOT
■ Shooting a Snapshot using Recorded and
Edited Face Data
After you record and edit face data, you can use it to shoot
photographs. The camera will record images in accordance with
the priority levels you configured for each set of face data.
1. Enter a REC mode.
2. Press [S] ( ) once.
3. Use [W] and [X] to select “ Face
Recognition: Family First” and then press
[SET].
4. Point the camera at the
subjects.
The camera will detect the
faces of the people whose
face data has been saved in
camera memory. The
detected faces all will be
bounded by frames after detection is complete.
• The frames will be colored according to the priority level
of the face: White (lowest), yellow, or green (highest). A
green frame indicates the highest priority face when the
image is recorded.
5. Half-press the shutter button.
This will focus on the face with the highest priority (the one
with the green frame) and adjust its brightness. When
focusing is complete, a green focus frame will appears at
the faces that were indicated by green frames in step 4
above.
6. When you are ready to shoot, press the
shutter button the rest of the way.
NOT
E
• The “ (Tracking)” is selected for the AF area whenever
“Family First” is selected as the face recognition mode
(page 125).
92
SHOOTING A SNAPSHOT
Selecting the Face Detection Method (Priority)
Use the following procedure to specify whether you want to give
priority to faster speed or a higher number of faces during face
detection.
1. Enter a REC mode.
2. Press [S] ( ) once.
3. Use [W] and [X] to select “ Priority” and
then press [SET].
4. Use [S] and [T] to select the setting you want,
and then press [SET].
NOT
E
• Selecting “Quantity” while using the Normal mode will
make it possible to detected smaller faces at a greater
distance than when “Speed” is selected.
Face Recognition Precautions
• The maximum number of faces that can be detected at one
time is five when “Speed” is selected for the “Priority” setting,
and ten when “Quantity” is selected.
• Detection of the following types of faces is not supported.
– A face that is partially obstructed by hair, sunglasses, a hat,
etc
– A face that is shaded from the light
– A profile of a face that is not shot straight on
– A face that is tilted left or right
– A face that is very far away or very small
– A face that is very close or very large
– A face in an area that is very dark
• Face detection is not supported for animals or other non-
human subjects.
• Even if you have the face of a family member recorded, the
person’s facial expression, shooting conditions, or other
factors can make proper recognition (highest priority
assignment) impossible.
• Face recognition can be improved by recording multiple
versions of the same person’s face indoors and outdoors, with
different expressions, and at different angles.
To do this:
Select this
setting:
Minimize face detection time. Up to five
faces can be detected.
Speed
Allow detection of a maximum of five to ten
faces.
Quantity
93
SHOOTING A SNAPSHOT
• Face recognition in the Family First mode may be slower than
in the Normal mode because the camera needs time to
determine whether the faces in the image are the same as the
recorded faces. Also, compared with the Normal mode, the
Family First mode will not be able to recognize faces that are
far away and small.
• If the camera is unable to find a face when you press the
shutter button, it will focus on the center of the screen.
• Always make sure that Auto Focus (AF) is selected as the
focus mode when shooting with face recognition. Use of no
other focus mode is supported.
• When shooting with the camera held sideways (for a portrait
orientation shot), face recognition may take more time when
shooting with the camera held normally (landscape
orientation).
• Face recognition cannot be used in combination with any of
the following features.
– Images recorded with certain BEST SHOT scenes
(Business cards and documents, White board, etc., Old
Photo, Short movie, Past movie, For YouTube, Layout,
Auto Framing, Voice Recording)
–Movie mode
• The following functions are disabled when shooting with face
recognition.
–Multi AF
– Continuous Shutter
– Histogram
94
SHOOTING A MOVIE
SHOOTING A MOVIE
Before shooting a movie, you should specify a movie image
quality setting. Movie image quality is a standard that
determines the detail, smoothness, and clarity of a movie during
playback. Shooting with the high-quality (HQ) setting will result
in better image quality, but it also shortens the amount of time
you can shoot.
1. In the REC mode, press [MENU].
2. On the “Quality” tab, select “ Quality” and
then press [X].
3. Use [S] and [T] to select the quality setting
you want and then press [SET].
• The “ ” indicator is on the monitor screen while “UHQ
Wide” or “HQ Wide” is selected for the quality setting.
Movie Image Quality
Image Quality
(pixels)
Approximate
Data Rate
Frame Rate
UHQ 640 × 480
5.8 Megabits/
second
30 frames/
second
UHQ Wide 848 × 480
7.0 Megabits/
second
30 frames/
second
HQ 640 × 480
2.8 Megabits/
second
30 frames/
second
HQ Wide 848 × 480
3.4 Megabits/
second
30 frames/
second
Normal 640 × 480
1.4 Megabits/
second
30 frames/
second
LP 320 × 240
545 Kilobits/
second
15 frames/
second
95
SHOOTING A MOVIE
Movie File Formats
Movies are recorded using H.264/AVC MOV format.
Movies you shoot with your camera can be played back on a
computer using QuickTime 7.
Movie Size
The following shows the approximate movie file size for a one-
minute movie.
Audio is also recorded while you shoot a movie. Audio is
monaural.
1. In the REC mode, point the camera at the
subject.
2. Press [ ] to start
shooting the movie.
• “ ” is displayed while
movie recording is in
progress.
3. Press [ ] again to
stop shooting.
Movie recording also will
stop automatically if memory
becomes full before you press [ ].
• The maximum size allowed for a single movie file is 4 GB.
Movie recording stops automatically when a file becomes
4 GB.
Image Quality Approximate Size
UHQ 43.3 MB
UHQ Wide 52.3 MB
HQ 20.8 MB
HQ Wide 25.3 MB
Normal 10.4 MB
LP 4.1 MB
Shooting a Movie
Recording Time
Remaining Recording Time
96
SHOOTING A MOVIE
IMPORTANT!
• Spending a long time using movie recording will cause the
camera to become slightly warm to the touch. This is
normal and does not indicate malfunction.
Shooting with BEST SHOT
With BEST SHOT (page 104), you select the preset scene that
is closest to the one you want to shoot, and the camera sets up
for it automatically. Selecting the “Night Scene” BEST SHOT
scene, for example, sets the camera to shoot bright, clear
images at night.
Anti Shake Movie Recording
You can also use Anti Shake to reduce the effects of hand
movement only while recording a movie (page 110). The effects
of subject movement are not limited.
Movie Recording Precautions
• You cannot use flash while shooting a movie.
• The camera also records audio. Note the following points
when shooting a movie.
– Take care that the
microphone is not blocked
by your fingers, etc.
– Good results are not
possible when the camera
is too far away from what
you are trying to record.
– Operating camera buttons
while shooting can cause
button noise to be picked
up in the audio.
• Shooting a very bright subject can cause a vertical band to
appear in the monitor screen image. This does not indicate
malfunction. The band will not be recorded in a snapshot, but
will be recorded in the case of a movie.
• Certain types of memory cards take longer to record data,
which can cause movie frames to be dropped. “ ” and
“ ” flash on the monitor screen during recording to let you
know when a frame has been dropped. Use of a memory card
with a maximum transfer speed of at least 10MB per second
is recommended.
Microphone
97
SHOOTING A MOVIE
• You can perform digital zoom while shooting a movie by
pressing [ ]. Optical zoom is not available while shooting a
movie. To use optical zoom for a movie, use [ ] to zoom as
required first and then press [ ] to start recording.
• The effects of camera movement in an image become more
pronounced when you shoot close up or a large zoom factor.
Because of this, use of a tripod is recommended under these
conditions.
• When the subject is outside the camera’s focus range,
focusing is not possible and the image will be out of focus.
• Auto Focus and Macro Focus become fixed focus while
shooting a movie (pages 122, 123).
With Short Movie, pressing [ ] will shoot a movie that starts a
few seconds before [ ] is pressed (first part) and ends a few
seconds after it is pressed (second part). You can specify how
long (in seconds) you want the first part and the second part of
the Short Movie to be.
• Since a few seconds of action before [ ] is pressed are
recorded, Short Movie is a good way to make sure you don’t
miss the action of kids or other active subjects.
• You can also use MOTION PRINT (page 182) to extract still
images of Short Movie scenes.
Using Short Movie
[ ] button pressed.
Short Movie
Recording Start
Few seconds Few seconds
B
98
SHOOTING A MOVIE
■ Getting Ready to Shoot with Short Movie
1. In the REC mode, press [BS].
2. Use [S], [T], [W], and [X] to
select the “Short Movie” scene
and then press [SET].
This causes “ ” to appear on the
monitor screen.
Pressing [ ] at this point will shoot a
Short Movie with a 4-second first part
and a 4-second second part.
If you want to configure settings for the
length of the first part, the length of the
second part, or MOTION PRINT
settings, continue from step 3.
3. Press [SET].
4. Use [S] and [T] to
select how long (in
seconds) you want the
first part of the Short
Movie to be and then
press [X].
5. Use [S] and [T] to
select how long (in
seconds) you want the
second part of the
Short Movie to be and
then press [X].
The total length of a Short Movie (first part plus second part)
must be at least two seconds and no longer than eight
seconds.
If you specify five seconds for the first part in step 4, for
example, you can specify no more than three seconds for
the second part. Specifying a value greater than three, in
this case, will cause the length specified for the first part to
be reduced automatically.
[BS]
Past part
length
Future part
length
MOTION PRINT settings
99
SHOOTING A MOVIE
6. Use [W] and [X] to select the MOTION PRINT
setting you want and then press [SET].
■ Shooting a Short Movie
1. With the camera pointed at the subject, press
[].
This will shoot a Short Movie of the length you specified and
then stop shooting automatically.
To stop shooting before the specified time is up, press [ ]
again.
IMPORTANT!
• Movie data is continually recorded and stored in a buffer
before you press [ ]. Keep the camera pointed at the
subject. Then at the right moment, press [ ]. When you
press [ ], the remaining recording time of part two of the
Short Movie counts down on the monitor screen.
To do this: Select this setting:
Create a snapshot with nine
movie frames, with the one
recorded when [ ] is
pressed in the center
9 frames
Create a snapshot of the
frame recorded when [ ]
is pressed
1 frame
Turn off MOTION PRINT Off
B
100
SHOOTING A MOVIE
To return to the REC mode
After Short Movie recording is complete, the camera stands by
for shooting of another Short Movie.
To exit Short Movie recording, press [BS], select something
other than “Short Movie” and then press [SET]. If you want to set
the camera up for normal snapshot shooting, for example, select
“Auto” and then press [SET].
Past Movie is similar to a normal movie, except that it captures
about five seconds of whatever happened in front of the lens
before [ ] was pressed to start shooting. Past Movie is a
great way to make sure that you never just miss that special
moment because you press the [ ] button too late.
Using Past Movie
[ ] button pressed.
Movie
Recording Start
Past Part Approximately 5 seconds
Recording End
[ ] button pressed.
101
SHOOTING A MOVIE
■ Getting Ready to Shoot with Past Movie
1. In the REC mode, press [BS].
2. Use [S], [T], [W], and [X] to select the “Past
Movie” scene and then press [SET].
This causes “ ” to appear on the monitor screen, which
indicates that Past Movie is enabled.
■ Shooting a Past Movie
1. With the camera pointed at the subject, press
[].
2. Press [ ] again to stop shooting.
Movie recording also will stop automatically if memory
becomes full before you press [ ].
IMPORTANT!
• When Past Movie is selected, the camera continually
updates an internal buffer that holds about five seconds of
movie images of what has happened in front of the
camera’s lens. When you press [ ], your movie will start
with the buffer’s current contents and continue from there.
Be sure to keep the camera still and pointed in the direction
of the subject for some time before you press [ ] to start
shooting.
[BS]
B
102
SHOOTING A MOVIE
To return to the REC mode
After Past Movie recording is complete, the camera stands by
for shooting of another Past Movie.
To exit Past Movie recording, press [BS], select something other
than “Past Movie” and then press [SET]. If you want to set the
camera up for normal snapshot shooting, for example, select
“Auto” and then press [SET].
You can shoot a snapshot while normal movie recording is in
progress. Note, however, that movie recording (image and
audio) is interrupted for a few seconds while the snapshot is
recorded.
■ Shooting a Snapshot During a Movie
1. While movie recording is in progress, press
the shutter button.
You can also half-press the shutter button to focus using
Auto Focus.
2. Movie recording continues after the snapshot
is recorded.
3. To stop movie recording, press [ ].
Shooting a Snapshot while Shooting a
Movie (Snapshot-In-Movie)
103
SHOOTING A MOVIE
IMPORTANT!
• Shooting a snapshot while shooting a movie is not
supported while any one of the following BEST SHOT
scenes is selected.
Short Movie, Past Movie, Business cards and documents,
White board, etc., For YouTube, Voice Recording.
NOT
E
• You can use [T] ( ) while shooting a movie to
change the flash mode.
104
USING BEST SHOT
USING BEST SHOT
With BEST SHOT, you simply select the sample scene that is
like the one you are trying to shoot, and the camera sets up
automatically. Even difficult backlight scenes (which result in the
main subject being too dark if set up improperly) come out
looking great!
■ Some Sample Scenes
■ Selecting a Sample Scene
1. In the REC mode,
press [BS].
This enters the BEST SHOT
mode and displays a screen
showing thumbnails of 15
sample scenes.
• The initial default
selection is “ ” (Auto).
• Portrait • Scenery
• Night Scene • Night Scene Portrait
Scene Number
Boundary (Currently
Selected Sample Scene)
Scene Name
105
USING BEST SHOT
2. Use [S], [T], [W], and [X] to move the
boundary to select the scene you want to
select.
• Pressing [S] or [T] while the boundary is at the edge of
the screen will scroll to the next screen of BEST SHOT
scenes.
• Pressing the zoom button will display text that explains
the settings configured by the selected scene (page 107).
Press the zoom button again to return to the scene
selection screen.
• To return to “Auto”, select Scene 1, which is “ ” (Auto).
Pressing [MENU] while the scene selection screen or
scene description text is on the monitor screen will cause
the boundary to jump directly to “ ” (Auto).
3. Press [SET] to apply the settings of the
selected scene and return to the recording
screen.
• The settings of the scene you selected remain in effect
until you select a different scene.
• To select a different BEST SHOT scene, repeat the
above procedure from step 1.
4. Press the shutter button (if you are shooting a
snapshot) or [ ] (if you are shooting a
movie).
106
USING BEST SHOT
BEST SHOT Scene Limitations
• Business cards and documents, White board, etc., Old Photo,
Layout, and Auto Framing.
These scenes cannot be used to shoot a movie.
• Short Movie, Past Movie, For YouTube
These scenes cannot be used to shoot a snapshot.
• Voice Recording
These scenes cannot be used to shoot a snapshot or movie.
• Night Scene, Fireworks
These scenes use slow shutter speeds. Since a slow shutter
speed increases the chance of digital noise in the image, the
camera automatically performs a digital noise reduction
process on slow shutter images. Because of this, such
images take longer to store after you press the shutter button.
Do not perform any key operation while an image is being
stored. Also, it is a good idea to use a tripod to avoid image
blur due to camera movement when shooting at slow shutter
speeds.
IMPORTANT!
• Your camera includes a sample scene that optimizes
settings for auction site images. Depending on your
camera model, the sample scene is named either “For
eBay” or “Auction”. Images you record using the auction
site sample scene are stored in a special folder so you can
easily find them on your computer (page 254).
• The BEST SHOT “For YouTube” scene sets up the camera
for recording movies that are optimized for uploading to
YouTube. Movies recorded with the “For YouTube” scene
are stored in a special folder to make them easy to locate
for uploading (page 254). Note that the image quality of
movies recorded with the “For YouTube” scene is always
“Normal”. Maximum recording time is 10 minutes.
• BEST SHOT scenes were not shot using this camera.
• Images shot using a BEST SHOT scene may not produce
the results you expected due to shooting conditions and
other factors.
• You can change the camera settings that are made when
you select a BEST SHOT scene. Note, however, that the
BEST SHOT settings revert to their defaults when you
select another BEST SHOT scene or turn off the camera. If
you think you will later need to use a particular camera
setup you configured, save it as a BEST SHOT user setup
(page 108).
107
USING BEST SHOT
Displaying Detailed Information about a BEST
SHOT Scene
To find out more about a scene,
select it with the boundary on the
scene selection screen and then
press the zoom button.
The following are the different operations you can perform
while the scene description screen is on the display.
• To return to the scene selection screen, press the zoom
button again.
• To scroll through available BEST SHOT scenes, use [W] and
[X].
• To select the currently displayed scene and configure the
camera with its settings, press [SET].
NOT
E
• If you select a scene by pressing [SET] while the
description screen is displayed, the same description
scene will appear the next time you press [BS] to view
BEST SHOT sample scenes.
108
USING BEST SHOT
■ Creating Your Own BEST SHOT Scenes
You can use the procedure below to save the setups of
snapshots or movies that you shot as BEST SHOT scenes. After
that, you can recall a setup whenever you want to use it.
1. In the REC mode, press [BS].
2. Use [S], [T], [W], and [X] to select “BEST
SHOT” (Register User Scene) and then press
[SET].
3. Use [W] and [X] to select the snapshot or
movie whose setup you want to register.
4. Use [S] and [T] to select “Save” and then
press [SET].
Your BEST SHOT scene will be assigned the name “Recall
User Scene”, along with a scene number.
IMPORTANT!
• Formatting the camera’s built-in memory (page 209)
deletes all the user BEST SHOT scene files.
NOT
E
• Registering a snapshot creates a snapshot setup, while
registering a movie creates a movie setup. A snapshot
setup can be used to shoot snapshots only, and a movie
setup can be used to shoot movies only.
• You can check the settings of the currently selected BEST
SHOT scene by displaying the camera’s setting menus and
looking at its settings.
• User snapshot scenes are assigned numbers sequentially
in the sequence: SU1, SU2, and so on, while movies are
assigned numbers in the sequence: MU1, MU2, and so on.
• The following are the settings that are included in a user
snapshot scenes:
Face Recognition, Focus, EV Shift, White Balance, Flash,
ISO, Metering, Flash Intensity, Flash Assist, Color Filter,
Sharpness, Saturation, Contrast
109
USING BEST SHOT
• The following are the settings that are included in a user
movie scene:
Focus, EV Shift, White Balance, Color Filter, Sharpness,
Saturation, Contrast
• You can store up to 999 BEST SHOT user scenes.
• User BEST SHOT scenes are stored in built-in memory
(page 253) in the SCENE folder (snapshots) or MSCENE
folder (movies).
Deleting a BEST SHOT User Scene
Perform the following steps when you want to delete a BEST
SHOT user scene.
1. In the REC mode, press [BS].
2. Press the zoom button to display its
explanation screen.
3. Use [W] and [X] to select the BEST SHOT user
scene you want to delete.
4. Press [T] ( ).
5. Use [S] and [T] to select “Delete” and then
press [SET].
This will delete the BEST SHOT user scene you selected
and display the next screen (either the next user scene or
the Register User Scene).
6. Use [W] and [X] to select another scene and
then press [SET].
• This returns to the recording state.
110
USING BEST SHOT
You can turn on the camera’s Anti Shake feature to reduce
image blur due to subject movement or hand movement when
shooting a moving subject using telephoto, when shooting a
fast-moving subject, or when shooting under dim lighting
conditions.
You can turn on Anti Shake using BEST SHOT or by performing
a menu operation.
■ Turning on Anti Shake Using BEST SHOT
1. In the REC mode, press [BS].
2. Use [S], [T], [W], and [X] to select the “Anti
Shake” scene and then press [SET].
Anti Shake will remain selected until you select a different
BEST SHOT scene.
■ Turning on Anti Shake Using the Panel
(Operation Panel)
1. In the REC mode, press [SET].
2. Use [S] and [T] to select the fifth option from
the top in the operation panel (Anti Shake).
3. Use [W] and [X] to select “Auto” and then
press [SET].
• This turns on Anti Shake and displays “ ” on the
monitor screen.
• In this case, Anti Shake will remain on until you tu rn it off
on the menu.
Reducing the Effects of Hand and
Subject Movement
111
USING BEST SHOT
IMPORTANT!
• Anti Shake will not work unless the ISO sensitivity setting
(page 135) is set to “Auto”.
• Though “ ” (Anti Shake) is displayed on the monitor
screen following an automatic flash operation using the
“Auto Flash” or “Red Eye Reduction” setting, or while the
flash setting is “Flash On” or “Soft Flash”, Anti Shake is
disabled.
• Shooting with Anti Shake can cause an image to appear
somewhat coarser than normal and can cause slight
deterioration of image resolution.
• Anti Shake may not be able to eliminate the effects of hand
or subject movement when movement is severe.
• You can also use Anti Shake to reduce the effects of hand
movement only while recording a movie. The effects of
subject movement are not limited (page 96).
• Anti Shake may not work with a very low shutter speed. If
this happens, use a tripod to stabilize the camera.
• The camera sometimes performs an automatic noise
reduction operation to reduce digital noise in images
recorded under certain lighting conditions. This operation
causes the camera to take longer than normal to store the
image and be ready for the next shot.
The BEST SHOT “High Sensitivity” scene makes it possible for
you to take natural looking images without using the flash, even
when lighting is low
1. In the REC mode, press [BS].
2. Use [S], [T], [W], and [X] to select the “High
Sensitivity” scene and then press [SET].
3. Press the shutter button to shoot the image.
High Sensitivity will remain selected until you select a
different BEST SHOT scene.
Taking Bright Images without Flash
Normal Snapshot (With flash) Snapshot with High Sensitivity
B
112
USING BEST SHOT
IMPORTANT!
• High Sensitivity is disabled following an automatic flash
operation using the “Auto Flash” or “Red Eye Reduction”
setting, or while the flash setting is “Flash On” or “Soft
Flash”.
• Shooting with High Sensitivity can cause an image to
appear somewhat coarser than normal and can cause
slight deterioration of image resolu tion.
• The desirable level of image brightness may not be
possible under very dark conditions.
• When shooting with slow shutter speeds, use a tripod to
protect against the effects of hand movement.
• The camera sometimes performs an automatic noise
reduction operation to reduce digital noise in images
recorded under certain lighting conditions. This operation
causes the camera to take longer than normal to store the
image and be ready for the next shot.
Shooting a business card, document, whiteboard, or similarly
shaped object from an angle can cause the subject to appear
misshaped in the resulting image. The BEST SHOT Business
Shot scenes correct the shape of rectangular objects so they
appear natural.
Shooting Images of Business Cards
and Documents (Business Shot)
Before Keystone Correction After Keystone Correction
B
113
USING BEST SHOT
BEST SHOT has two Business Shot scenes from which to
choose.
■ Selecting a Business Shot Scene
1. In the REC mode, press [BS].
2. Use [S], [T], [W], and [X] to select the
“Business cards and documents” or the
“White board, etc.” scene and then press
[SET].
Whichever you select will remain in effect until you select a
different BEST SHOT scene.
■ Shooting an Image Using a Business Shot
Scene
1. After selecting either
of the BEST SHOT
Business Shot scenes,
compose the image
and press the shutter
button to shoot.
This displays a screen that shows all of the rectangular
shapes in the image that qualify as candidates for keystone
correction.
A red boundary will surround the currently selected
correction candidate. If there is a black boundary, it means
that the black boundary is indicating a second possible
candidate. If there is no second candidate (black boundary),
jump directly to step 3.
• If the camera is unable to detect any keystone correction
candidate at all, the message “Cannot correct image!” will
appear on the monitor screen momentarily and then the
camera will save the image as-is (uncorrected).
• Business cards and
documents
• White board, etc.
114
USING BEST SHOT
2. Use [W] and [X] to select the candidate you
want to use for correction.
3. Use [S] and [T] to select “Correct” and then
press [SET].
This will correct the image and store the resulting
(corrected) image.
• To cancel the correction operation, select “Cancel”.
IMPORTANT!
• Make sure the entire object you are trying to shoot (correct)
is enclosed within the monitor screen. The camera will not
be able to detect the shape of the object correctly unless it
is enclosed entirely within the monitor screen.
• Correction will not be possible if the subject is the same
color as its background. Make su re the object is against a
background that allows its outline to stand out.
• Digital zoom is disabled while shooting with a Business
Shot scene. However, you can use optical zoom.
• The maximum Business Shot image size is 2M (1600 ×
1200 pixels), even if the camera is configured for a larger
image size. When the camera is configured to record
images smaller than 2M (1600 × 1200 pixels), Business
Shot scenes will produce images in accordance with the
currently specified image size.
115
USING BEST SHOT
With Old Photo, you can record the image of an old, faded
photograph and then use the camera’s built-in advanced digital
camera technology to restore it.
■ Before Recording with Old Photo
• Make sure the entire photograph you are trying to record is
enclosed within the monitor screen.
• Make sure the photograph is against a background that
allows its outline to stand out, and that it fills the monitor
screen to the maximum extent possible.
• Make sure that light is not reflecting off the surface of the
original photograph when recording it.
• If the old photograph is portrait orientation, be sure to
compose the image with the camera in landscape (horizontal)
orientation.
NOT
E
• When the camera is at an angle to the photograph you are
recording, the shape of the photograph may appear
distorted in the recorded image. Auto keystone correction
corrects for this distortion, which means that a photograph
appears normal even if you record it at an angle.
■ Selecting the Old Photo Scene
1. In the REC mode, press [BS].
2. Use [S], [T], [W], and [X] to select the “Old
Photo” scene and then press [SET].
“Old Photo” will remain selected until you select a different
BEST SHOT scene.
Restoring an Old Photograph
116
USING BEST SHOT
■ Recording an Image with Old Photo
1. Press the shutter
button to shoot the
image.
• This displays a photograph
contour confirmation
screen and then saves the
original recorded image.
An error message will appear (page 285), without
displaying the photograph contour confirmation screen, if
the camera is unable to find the contour of the
photograph.
2. Use [W] and [X] to select the candidate you
want to correct.
3. Use [S] and [T] to select “Trim” and then
press [SET].
This displays a cropping boundary on the monitor screen.
• To cancel the correction operation, select “Cancel”.
4. Press the zoom button
to zoom the cropping
boundary.
5. Use [S], [T], [W], and [X] to move the
selection boundary to the desired location and
then press [SET].
The camera will correct color automatically and save the
corrected image.
• If you do not want a border around the resulting image,
select and area that is smaller than the original image.
• To cancel the restoration operation at any point and save
the image as-is, press [MENU].
117
USING BEST SHOT
IMPORTANT!
• Digital zoom is disabled while recording with Old Photo.
However, you can use optical zoom.
• When recording the image of a photograph, the camera will
not be able to recognize the shape of the photograph in the
following cases.
– When part of the photograph extends outside of the
monitor screen
– When the subject is the same color as the background it
is placed upon
• The maximum Old Photo image size is 2M (1600 × 1200
pixels). When the camera is configured to record images
smaller than 2M (1600 × 1200 pixels), Old Photo will
produce images in accordance with the currently specified
image size.
• Under certain conditions, restored colors may not produce
the desired results.
You can create a multi-snapshot image by recording snapshots
into the frames that are arranged in a preset pattern. This lets
you create album-like arrangements of related images in a
single image. BEST SHOT scenes are available with three
frames and two frames.
Recording Snapshots into a Multi-
image Layout (Layout Shots)
• Layout (Two Images) • Layout (Three Images)
118
USING BEST SHOT
1. In the REC mode, press [BS].
2. Use [S], [T], [W], and [X] to select “Layout”,
and then press [SET].
3. Use [W] and [X] to select a background color.
4. Press the shutter
button to record the
first image.
The camera will record the
first snapshot and then get
ready for the next one.
5. Press the shutter button again to record the
next snapshot.
• If you are shooting into a three-frame layout, press the
shutter button a third time to record the third image.
• Pressing [SET] during steps 4 or 5 of the above
procedure will toggle between the layout screen (the one
with the frames on it) and a screen that uses the entire
display area to compose the image you are shooting.
• To clear the currently recorded Layout images and restart
an ongoing Layout operation, press [MENU]. Next,
continue from step 4 above.
• You cannot save a multi-snapshot image unless there are
snapshots recorded in each of the available frames.
Frame
119
USING BEST SHOT
IMPORTANT!
• Only the final multi-snapshot image is saved in camera
memory. The individual snapshots are not saved.
• The size of the multi-snapshot image for this operation is
fixed automatically at 7M (3072 × 2304 pixels).
• While Layout Shot is being used, the setup of the camera is
changed automatically as shown below.
– ISO Sensitivity: Auto (fixed)
– AF Area: Spot (fixed)
• The following functions are disabled during Layout Shot.
– Digital Zoom
–Self-timer
–Continuous Shutter
– Face Recognition
With auto tracking, a boundary area follows a moving subject,
making it easy to snap an image with the subject in the center.
1. In the REC mode, press [BS].
2. Use [S], [T], [W], and [X] to select “Auto
Framing”, and then press [SET].
3. Align the focus frame
with the subject you
want to focus on and
then half-press the
shutter button.
• The focus frame and the
cropping boundary will
follow the subject as it
moves.
• Focusing of the subject
continues to be performed
while you keep the shutter
button half pressed.
Auto Tracking a Moving Subject (Auto
Framing)
Focus frame
Cropping boundary
120
USING BEST SHOT
4. Press the shutter button all the way to record
the image.
• This will record the area enclosed within the cropping
boundary.
IMPORTANT!
• Only the part of the image within the cropping boundary will
be recorded.
• The image size for this operation is fixed automatically at
3M (2048 × 1536 pixels).
• The following functions are disabled during Auto Framing.
– Timestamp
–Self-timer
– Normal-speed Continuous Shutter, High-speed
Continuous Shutter, Flash Continuous Shutter
– Face Recognition
• Auto Framing may not be able to follow a fast-moving
subject. If this happens, release the shutter button, re-align
the focus frame with the subject, and then half-press the
shutter again.
• When shooting with “Auto Framing”, the image size is fixed
at 3M (2048 × 1536 pixels) and the Undeteriorated Image
Quality Range is 3X (page 73).
B
121
ADVANCED SETTINGS
ADVANCED SETTINGS
Your camera provides you with the five focus modes described below. The initial factory default focus mode is Auto Focus.
* “Focus Range” indicates distance from the lens surface.
Changing the Focus Mode
Focus Mode Description Focus Range*
Auto
Focus
Automatic focus when the shutter button is half-pressed.
Auto Focus becomes fixed focus while shooting a movie.
Auto adjustment
(Approximately 40 cm to (1.3' to ))
• Minimum distance position varies with optical zoom.
Macro
(Close-up)
Used for close-up shooting. Macro Focus becomes fixed
focus while shooting a movie.
Auto adjustment (15 cm to 50 cm (5.9" to 19.7"))
• Minimum distance position varies with optical zoom.
Pan
Focus
Fixed focus for relatively wide-range focusing. Use Pan
Focus (PF) under conditions where Auto Focus is difficult.
Fixed distance
• Focus range varies with optical zoom position.
Infinity Focus is fixed at infinity. Use this mode when shooting
scenery and other faraway images.
Infinity
Manual
Focus
Focus is performed manually. • Focus range varies with optical zoom factor.
Optical Zoom Factor Range
1X 15 cm to (0.5' to )
3X 40 cm to (1.3' to )
B
122
ADVANCED SETTINGS
Perform the following steps to change the focus mode.
1. In the REC mode, press [MENU].
1. On the “REC” tab, select “Focus” and then
press [X].
2. Use [S] and [T] to
select the focus mode
setting you want and
then press [SET].
An icon appears on the
monitor screen to indicate
the current focus mode.
• See the following pages of
this section for details
about shooting with each
focus mode.
Using Auto Focus
1.
Align the monitor screen’s focus frame with
the subject you want to focus and then half-
press the shutter button.
This camera will perform the focus operation.
You can tell if the image is in focus by checking the
operation lamp and the focus frame color.
Focus Mode Icon
Status Operation Lamp Focus Frame
Focusing
Complete
Lit Green Green
Not Focused Flashing Green Red
Focus Frame
Operation Lamp
123
ADVANCED SETTINGS
2. When the image is focused, press the shutter
button the rest of the way to shoot.
IMPORTANT!
• Auto Focus becomes fixed focus while shooting a movie.
NOT
E
• When proper focusing is not possible because the subject
is closer than the Auto Focus range, the camera will switch
to the Macro Focus range automatically (Auto Macro).
• Whenever you perform an optical zoom operation while
shooting with Auto Focus, a value will appear on the
monitor screen as shown below to tell you the focus range.
Example: cm –
* will be replaced by the actual focus range value.
Using Macro Focus
1.
Half-press the shutter button to focus the
image.
The focus operation is the same as that for Auto Focus.
2. When the image is focused, press the shutter
button the rest of the way to shoot.
IMPORTANT!
• Use of the flash along with Macro Focus can cause the light
of the flash to become blocked, which can produce
unwanted lens shadows in your image.
• Macro Focus becomes fixed focus while shooting a movie.
124
ADVANCED SETTINGS
NOT
E
• When Macro Focus cannot focus properly because the
subject is too far away, the camera will switch to the Auto
Focus range automatically (Auto Macro).
• Whenever you perform an optical zoom operation while
shooting with Macro Focus, values will appear on the
monitor screen as shown below to tell you the focus range.
Example: cm – cm
* will be replaced by the actual focus range values.
125
ADVANCED SETTINGS
Auto Focus and Macro Focus Shooting Tips
Changing the Auto Focus Area
Use the following procedure to change the metering area used
for Auto Focus (AF).
1. In the REC mode, press [MENU].
2. On the “REC” tab, select “AF Area” and then
press [X].
3. Use [S] and [T] to select the setting you
want and then press [SET].
To do this:
Select this
setting:
Use a small area in the center of the
screen for metering
• This setting is best when you want to
use focus lock (page 127).
Spot
When the shutter button is half-pressed,
have the camera automatically select
one or more of nine possible focus
frames
• If the camera is able to focus on
multiple points, all applicable focus
frames turn green.
Multi
Half-pressing the shutter button focuses
the subject and also starts a focus
tracking operation that keeps the focus
frame on the subject as it moves.
Tracking
To do this:
Select this
setting:
126
ADVANCED SETTINGS
NOT
E
• When you select “ Multi” as the focus area, nine focus
frames appear on the monitor screen. The camera will
automatically determine the optimum focus frame(s),
which will change to green on the monitor screen.
• “ Multi” cannot be used in the Face Recognition
Normal mode or the Family First mode (page 87).
• If you select “ Tracking” while using continuous
shutter or self-timer, subject will be tracked until image
recording starts.
Spot / Tracking Multi
Focus Frame Focus Frame
B
127
ADVANCED SETTINGS
Using Focus Lock
“Focus lock” is the name of a technique you can use when you
want to shoot an image in which the subject to be focused on is
not within the focus frame in the center of the screen.
• Use focus lock with “ Spot” or “ Tracking” focus.
1. Align the monitor
screen’s focus frame
with the subject you
want to focus on and
then half-press the
shutter button.
2. Keeping the shutter
button half-pressed,
re-compose the
image as you like.
• When “ Tracking” is
selected as the Auto
Focus area, the focus
frame will move
automatically and follow
the subject.
3. When the image is focused, press the shutter
button the rest of the way to shoot.
NOT
E
• Focus lock also causes exposure (AE) to be locked.
Subject to be focused on
Focus Frame
128
ADVANCED SETTINGS
Quick Shutter
If you press the shutter button all the way without waiting for
Auto Focus while Quick Shutter is turned on, the camera will
record the image using a high-speed focus operation that is
much faster than normal Auto Focus. This helps to avoid
missing a special moment while you wait for the camera to
Auto Focus.
• Some images may be out of focus when Quick Shutter is
used.
1. In the REC mode, press [MENU].
2. On the “REC” tab, select “Quick Shutter” and
then press [X].
3. Use [S] and [T] to select the setting you
want and then press [SET].
4. Press the shutter button all the way down
without pausing.
Pressing the shutter button all the way without pausing at
the halfway type will record with Quick Shutter, without
performing the normal Auto Focus operation.
IMPORTANT!
• Quick Shutter will not work when you are using a very
high zoom factor. In this case, you should use Auto Focus
instead.
To do this: Select this setting:
Turn on Quick Shutter On
Turn off Quick Shutter Off
129
ADVANCED SETTINGS
Using Fixed Focus (Pan Focus)
Pan Focus (PF) fixes focus for a relatively wide focus range,
which means you can shoot without waiting for the Auto Focus
operation to finish.
1. When you are ready to shoot, press the
shutter button all the way, without pausing.
Using Infinity Focus
As its name suggests, Infinity Focus fixes focus at infinity ( ).
Use this mode when shooting scenery and other faraway
subjects. Infinity Focus also comes in handy when shooting from
a car or train window, or when shooting scenery or other
subjects that are difficult to focus properly with Auto Focus.
1. While Infinity Focus is selected as the focus
mode, press the shutter button to shoot.
Using Manual Focus
With Manual Focus, the camera
automatically enlarges the subject
on the monitor screen, which
helps you manually adjust focus.
Manual focus can be used for
shoot such images as moving
trains. Before the train arrives,
manually focus on an electric pole
or some other object. Then when
the train passes the object you
focused on, you can shoot without
worrying about focus.
1. While Manual focus is selected as the focus
mode, compose the image on the monitor
screen so the subject you want to focus on is
within the yellow boundary.
Yellow Boundary
130
ADVANCED SETTINGS
2. Use [W] and [X] to focus the image, as you
view the results on the monitor screen.
At this time the image that is within the boundary will enlarge
and fill the monitor screen, which aids in focusing.
• The monitor screen will return to step 1 if you do not
perform any operation for about two seconds.
3. Press the shutter button to shoot.
NOT
E
• Whenever you perform an optical zoom operation (page
71) while shooting with manual focus, a value will appear
on the monitor screen as shown below to tell you the
focusing range.
Example: MF cm –
* will be replaced by the actual focus range values.
IMPORTANT!
• While Manual Focus is selected as the focus mode, the [W]
and [X] keys are used to adjust the focus setting. Any other
functions assigned to the [W] and [X] keys with Key
Customize (page 145) are not performed when you press
the keys during manual focus.
For this: Press this button:
Closer focus[W]
More distant focus[X]
131
ADVANCED SETTINGS
You can manually adjust an image’s exposure value (EV value)
before shooting it. This feature helps to achieve better results
when shooting a backlit subject, a strongly lit subject indoors, or
a subject that is against a dark backgrou nd.
Exposure Compensation Value: –2.0EV to +2.0EV
Unit: 1/3EV
1. In the REC mode, press [SET].
2. Use [S] and [T] to
select the second
option from the bottom
in the operation panel
(EV Shift).
3. Use [W] and [X] to adjust the exposure
compensation value.
[X]: Increases the EV value. A higher EV value is best used
for light-colored subjects and backlit subjects.
* Increasing the EV value also works well with the
BEST SHOT “Backlight” scene.
[W]: Decreases the EV value. A lower EV value is best for
dark-color subjects and for shooting outdoors on a
clear day.
To cancel exposure compensation, adjust the value until it
becomes 0.0.
Correcting Image Brightness (EV
Shift)
EV Shift Value
132
ADVANCED SETTINGS
4. After the EV value is the way you want, press
[SET] to apply it.
The exposure compensation value you set remains in effect
until you change it.
IMPORTANT!
• When shooting under very dark or very bright conditions,
you may not be able to obtain satisfactory results even
after performing exposure compensation.
NOT
E
• Performing an EV shift operation while using multi-pattern
metering will cause the metering mode to switch
automatically to center weighted metering. The metering
mode will return to multi-pattern metering when you change
the exposure compensation value to 0.0 (page 136).
• You can use the key customization feature to configure the
[W] and [X] buttons so they control EV shift (page 145).
This comes in handy when adjusting exposure
compensation while viewing the on-screen histogram
(page 142).
Shooting on a cloudy day can give your subject a blue cast,
while shooting under white fluorescent lighting can give your
subject a green cast. White balance corrects for different types
of lighting so the colors in your images always look natural.
1. In the REC mode, press [SET].
2. Use [S] and [T] to select the third option from
the bottom in the operation panel (White
Balance).
3. Use [W] and [X] to select the white balance
setting you want and then press [SET].
Controlling White Balance
133
ADVANCED SETTINGS
NOT
E
• When “Auto” is selected for the white balance setting, the
camera automatically determines the white point of the
subject. Certain subject colors and light source conditions
can cause problems when the camera tries to determine
the white point, which makes proper white balance
adjustment impossible. If this happens, select the white
balance setting that matches you shooting conditions
(Daylight, Overcast, etc.)
• You can use the key customization feature to configure the
[W] and [X] buttons so they control the white balance
setting (page 145).
• To select “Auto” with the control key (when the control key
is configured to select the auto white balance setting),
scroll through the settings until “ ” appears on the
monitor screen.
To do this:
Select this
setting:
Let the camera adjust white balance
automatically
Auto WB
Shoot outdoors on a clear day Daylight
Shoot outdoors on an overcast rainy day, in
the shade, etc.
Overcast
Shoot in the shadow of a building, in the
shade of trees, etc. on a clear day
Shade
Suppress color cast when shooting under
white or day white fluorescent lighting
Day White
Fluorescent
Suppress color cast when shooting under
daylight fluorescent lighting
Daylight
Fluorescent
Suppress the appearance of light bulb
lighting
Tungsten
Manually adjust white balance to suit a
particular light source
• For details, see “Configuring the White
Balance Setting Manually” (page 134).
Manual WB
AWB
N
D
MWB
AWB
134
ADVANCED SETTINGS
■ Configuring the White Balance Setting
Manually
Under complex lighting conditions, the preset white balance
settings may not be able to produce natural looking colors.
When this happens, you can configure the white balance setting
manually for particular lighting conditions. Note that you will
need to have a plain white sheet of paper on hand when
performing the following procedure.
1. In the REC mode, press [SET].
2. Use [S] and [T] to select the third option from
the bottom in the operation panel (White
Balance).
3. Use [W] and [X] to select “ Manual WB”.
This will display the subject that the lens is aimed at on the
monitor screen using the cu rrent manual white balance
settings. If you want to use the current settings, jump
directly to step 5.
4. Under the lighting conditions you plan to use
when shooting, point the camera at a blank
white piece of paper so it fills the entire
monitor screen and then press the shutter
button.
The camera will adjust white balance settings for the current
conditions, and display “Complete” when it is finished.
5. Press [SET] to register the white balance
settings and return to the shooting screen.
• The white balance setting is retained even if you turn off
the camera.
MWB
White sheet of paper
135
ADVANCED SETTINGS
ISO sensitivity is a value that expresses sensitivity to light. A
larger value indicates higher sensitivity, which is better for
shooting when available lighting is dim. If you want to use faster
shutter speeds, you should use a higher ISO sensitivity value.
Under certain conditions, a fast shutter speed in combination
with a high ISO sensitivity setting can cause digital noise, which
makes an image appear rough. For clean, good-quality images,
use the lowest possible ISO sensitivity setting.
1. In the REC mode, press [SET].
2. Use [S] and [T] to select the sixth option from
the top in the operation panel (ISO Sensitivity).
3. Use [W] and [X] to select the setting you want
and then press [SET].
Specifying ISO Sensitivity
To shoot with this level of
sensitivity:
Select this
setting:
Automatically selected by camera. Auto
Low ISO 64
ISO 100
ISO 200
ISO 400
High ISO 800
136
ADVANCED SETTINGS
IMPORTANT!
• Using flash with high ISO sensitivity can cause problems
with subjects that close to the camera.
• “Auto” ISO sensitivity always is used for movies, regardless
of the current ISO sensitivity setting.
• You can use the key customization feature to configure the
[W] and [X] buttons so they control the ISO sensitivity
setting (page 145).
• Anti Shake (page 110) will not work unless the ISO
sensitivity setting is set to “Auto”.
The metering mode determines what part of the subject is
metered for exposure.
1. In the REC mode, press [MENU].
2. On the “Quality” tab, select “Metering” and
then press [X].
3. Use [S] and [T] to select the setting you want
and then press [SET].
Multi (Multi Metering)
Multi-pattern metering divides the image into
sections and measures the light in each
section for a balanced exposure reading. The
camera automatically determines shooting
conditions according to the measured lighting pattern, and
makes exposure settings accordingly. This type of metering
provides error-free exposure settings for a wide range of
shooting conditions.
Specifying the Metering Mode
137
ADVANCED SETTINGS
Center Weighted
Center weighted metering concentrates on the
center of the focus area to measure light. Use
this metering method when you want to exert
some control over exposure, without leaving
settings totally up to the camera.
Spot
Spot metering takes readings at a very small
area. Use this metering method when you
want exposure to be set according to the
brightness of a particular subject, without
being affected by surrounding conditions.
IMPORTANT!
• The metering mode will change to “Center Weighted”
automatically if you change the EV shift value (page 131) to
anything other than 0.0 while “Multi” is selected. The
metering mode will change back to “Center Weighted”
when the EV shift value is changed back to 0.0.
• When “Multi” is selected as the metering mode, the
icon will not be displayed on the monitor screen when you
return to the REC mode information display (page 270).
NOT
E
• You can use the key customization feature to configure the
[W] and [X] buttons so they control the metering mode
setting (page 145).
138
ADVANCED SETTINGS
You can use the procedure below to expand the dynamic range,
which makes it possible to capture the bright areas of an image
while reducing the chance of overexposure and underexposure.
When shooting a subject that is back lit, for example, an
expanded dynamic range minimizes overexposure and
underexposure.
1. In the REC mode, press [MENU].
2. On the “Quality” tab, select “Dynamic Range”
and then press [X].
3. Use [S] and [T] to select the setting you want
and then press [SET].
• You can also correct the dynamic range of a photograph
you have already shot (page 179).
Reducing the Effects of Overexposure
and Underexposure
When you want to do this:
Select this
setting:
Apply Dynamic Range to a greater
extent than “Expand +1”
Expand +2
Suppress overexposure and
underexposure
Expand +1
Do not suppress overexposure and
underexposure
Off
C
139
ADVANCED SETTINGS
You can use the procedure below to reduce digital noise from
human skin in the recorded image and enhance its texture.
1. In the REC mode, press [MENU].
2. On the “Quality” tab, select “Portrait Refiner”
and then press [X].
3. Use [S] and [T] to select the setting you want
and then press [SET].
The camera’s filter feature lets you add color tints to your images
as you shoot them. The color effect look just like what you would
get by installing a color filter on the lens of the camera.
1. In the REC mode, press [MENU].
2. On the “Quality” tab, select “Color Filter” and
then press [X].
3. Use [S] and [T] to select the setting you want
and then press [SET].
Available filter settings are: Off, B/W, Sepia, Red, Green,
Blue, Yellow, Pink, and Purple
Enhancing Human Skin Textures
When you want to do this:
Select this
setting:
Enhance skin texture more than “Noise
Filter +1”
Noise Filter +2
Enhance skin texture Noise Filter +1
Turn off skin texture enhancement Off
Using the Camera’s Color Filter
Effects
140
ADVANCED SETTINGS
Use the following procedure to adjust the sharpness of subject
outlines in your images.
1. In the REC mode, press [MENU].
2. On the “Quality” tab, select “Sharpness” and
then press [X].
3. Use [S] and [T] to select the setting you want
and then press [SET].
You can specify one of five sharpness settings from +2
(sharpest) to –2 (least sharp).
Use the following procedure to adjust the saturation of colors in
your images.
1. In the REC mode, press [MENU].
2. On the “Quality” tab, select “Saturation” and
then press [X].
3. Use [S] and [T] to select the setting you want
and then press [SET].
You can specify one of five saturation settings from +2
(most saturated) to –2 (least saturated).
Controlling Image Sharpness Controlling Color Saturation
141
ADVANCED SETTINGS
Use the following procedure to adjust the contrast of your
images.
1. In the REC mode, press [MENU].
2. On the “Quality” tab, select “Contrast” and
then press [X].
3. Use [S] and [T] to select the setting you want
and then press [SET].
You can specify one of five contrast settings from +2 (most
contrast between light and dark) to –2 (least contrast
between light and dark).
You can have the snapshot’s recording date only, or date and
time stamped in the lower right corner of the image.
1. In the REC mode, press [MENU].
2. On the “Set Up” tab, select “Timestamp” and
then press [X].
3. Use [S] and [T] to select the setting you want
and then press [SET].
Example: December 24, 2007, 1:25 p.m.
Adjusting Image Contrast Date Stamping Snapshots
To do this:
Select this
setting:
Display the date only (2007/12/24) Date
Display the date and time (2007/12/24
1:25pm)
Date&Time
Display nothing Off
142
ADVANCED SETTINGS
IMPORTANT!
• Even if you do not stamp the date and/or time with
Timestamp, you can do so later using the DPOF function
and the printing software function (page 218).
• Once date and time information is stamped in a print, it
cannot be edited or deleted.
• Use the “Date Style” setting (page 203) to specify the Year/
Month/Day format of the date.
• The recording date and time are determined in accordance
with the camera’s clock settings (pages 11, 202) when the
snapshot is recorded.
• Digital zoom is not supported while date stamping is turned
on.
• Date stamping is not supported for the following types of
images.
– Some BEST SHOT images (Au to Framing, Business
cards and documents, White board, etc., Old Photo)
– Zoom Continuous Shutter
The on-screen histogram that prov ides a graphic representation
of the current exposure of the image. You can also display the
histogram in the PLAY mode for information about the exposure
levels of images.
1. Press [DISP].
2. On the “Info.” tab, select “+Histogram” and
then press [SET].
Using the On-screen Histogram to
Check Exposure
Histogram
143
ADVANCED SETTINGS
NOT
E
• You can use key customization to configure the [W] and [X]
buttons so they control the EV shift setting. Then you can
perform EV shift while viewing the results on the on-screen
histogram (page 145).
■ How to Use the Histogram
A histogram is a graph that represents the lightness of an image
in terms of the number of pixels. The vertical axis indicates the
number of pixels, while the horizontal axis indicates lightness. If
the histogram appears too lopsided for some reason, you can
use EV shift to move it left or right in order to achieve better
balance. Optimum exposure can be achieved by EV shifting so
the graph is as close to the center as possible. For snapshots,
you can even display individual histograms for R (red), G
(green), and B (blue). These lines can be used to determine
whether there is too much or too little of each of the color
components in an image.
Example Histograms
A histogram towards the left side
results when the overall image is
dark. A histogram that is too far to the
left may result in “black out” of the
dark areas of an image, as shown in
the nearby image.
A histogram towards the right side
results when the overall image is
light. A histogram that is too far to the
right may result in “white out” of the
light areas of an image, as shown in
the nearby image.
144
ADVANCED SETTINGS
An overall well-balanced histogram
results when the overall image is at
optimal lightness.
IMPORTANT!
• A centered histogram does not necessarily guarantee
optimum exposure. If you intentionally want to over expose
or under expose the image, you may not want a centered
histogram.
• Due to the limitations of exposure compensation, you may
not be able to achieve an optimum histogram configuration.
• Use of the flash and certain shooting conditions can cause
the histogram to indicate exposure that is different from the
actual exposure of the image when it was shot.
• This histogram does not appear when shooting with face
recognition (page 87).
The following functions are also available in the REC mode to
help make your digital image more efficient and enjoyable.
• Assign functions to the [W] and [X] keys
• Display an on-screen grid for easy image composition
• Review an image you just recorded
• Register initial power up settings
• Reset settings
Other Useful Recording Functions
145
ADVANCED SETTINGS
Using Key Customize to Assign
Functions [W] and [X]
Key Customize lets you assign any one of the five functions
listed below to the [W] and [X] keys. Once you do, you will be
able to use the assigned functions while shooting snapshots or
movies, without going through the menus. For details about
each of the functions, see the referenced page numbers.
1. In the REC mode, press [MENU].
2. On the “REC” tab, select “L/R Key”, and then
press [X].
3. Use [S] and [T] to select the function you
want to assign and then press [SET].
After you assign a function, you can control its setting using
the [W] and [X] keys.
Selecting “Off” leaves the [W] and [X] keys with no function
assigned.
When this function is
assigned:
You can use [W] and [X] to do
this:
Metering (page 136) Change the metering setting
EV Shift (page 131)
Perform EV shifting for
exposure compensation
White Balance (page 132)
Change the white balance
setting
ISO (page 135)
Change the ISO sensitivity
setting
Self-timer (page 79) Select the self-timer time
146
ADVANCED SETTINGS
Displaying an On-screen Grid
The on-screen grid can be displayed on the REC mode monitor
screen for easy alignment when composing images.
1. In the REC mode, press [MENU].
2. On the “REC” tab, select “Grid” and then
press [X].
3. Use [S] and [T] to select the setting you want
and then press [SET].
Displaying the Image You Just Recorded
(Image Review)
When you purchase your camera, it is initially configured with
the Image Review feature turned on. Image Review displays the
image you just recorded so you can check it.
1. In the REC mode, press [MENU].
2. On the “REC” tab, select “Review” and then
press [X].
3. Use [S] and [T] to select the setting you want
and then press [SET].
To do this: Select this setting:
Display the grid On
Hide the grid Off
To configure the camera to do this
after an image is recorded:
Select this
setting:
Display the image for about one second On
Nothing Off
147
ADVANCED SETTINGS
Using Icon Help
Icon help displays guidance text about an icon when you select it
on the monitor screen while in the REC mode.
• Icon help text is displayed for the following functions:
Recording mode, metering, flash mode, white balance, self-
timer, EV shift. Note, however, that metering, white balance,
self-timer and EV shift icon help text appears only when
“Metering”, “White Balance”, “Self-timer” or “EV shift”
respectively is assigned to the [W] and [X] keys with the key
customization feature (page 145).
1. In the REC mode, press [MENU].
2. On the “REC” tab, select “Icon Help” and then
press [X].
3. Use [S] and [T] to select the setting you want
and then press [SET].
IMPORTANT!
• The icons listed below do not appear on the display while
icon help is turned off.
– Flash mode icon (page 75)
– White balance icon (page 132)
– Metering mode icon (page 136)
To do this:
Select this
setting:
Display icon help text next to the icon of
a function when you select the function
On
Turn off icon help Off
AWB
148
ADVANCED SETTINGS
Using Mode Memory to Configure Power
On Default Settings
You can configure the camera so it saves certain settings in
“mode memory” whenever it is turned off, and restores the
settings the next time you turn the camera back on. This keeps
you from having to configure the camera each time you turn it off
and on.
See step 4 of the setting procedure below for information about
the settings you can save with mode memory.
1. In the REC mode, press [MENU].
2. On the “REC” tab, select “Memory” and then
press [X].
3. Use [S] and [T] to select the item you want to
configure and then press [X].
4. Use [S] and [T] to select the setting you want
and then press [SET].
To do this:
Select this
setting:
Save the current setting when the
camera turned off, and restore it when
the camera is turned back on
On
Restore the optimum default when the
camera is turned on
Off
149
ADVANCED SETTINGS
*1 “On” restores the selected BEST SHOT scene when the
camera is turned back on. “Off” exits BEST SHOT when the
camera is turned off.
*2 Optical zoom position only.
IMPORTANT!
• Turning the camera off while mode memory for the BEST
SHOT mode is on will restore the settings of the BEST
SHOT scene what was selected when you last turned off
the camera. This is true, regardless of any of the mode
memory on/off settings of each individual setting, except for
Zoom Position.
Setting
Mode
Memory On
Mode Memory Off
BEST SHOT
*1
Setting at
power off
Exits BEST SHOT
when camera is
turned off.
Flash Auto
FocusAuto
White Balance Auto
ISO Auto
AF Area Spot
Metering Multi
Self-timer Off
Flash Intensity 0
Digital Zoom On
MF Position
Focus mode before
manual focus was
selected.
Zoom Position
*2
Full wide
150
ADVANCED SETTINGS
Resetting the Camera to Its Initial
Factory Defaults
Use the following procedure when you want to return to the
camera to its initial factory default settings, which are the ones
that are configured when you first purchase the camera. See
“Menu Reference” on page 273 for the initial factory default
setting for each menu item.
1. Press [MENU].
2. On the “Set Up” tab, select “Reset” and then
press [X].
3. Use [S] and [T] to select “Reset” and then
press [SET].
• To cancel the procedure without resetting, select
“Cancel”.
IMPORTANT!
• The following are not initialized when you reset the camera
(page 275).
– Home Time setup
– World Time setup
–Adjust
– Date Style
–Language
– Video Out
151
VIEWING SNAPSHOTS AND MOVIES
VIEWING SNAPSHOTS AND MOVIES
Use the following procedure to view snapshots on the camera’s
monitor screen.
1. Press [ ] to enter the PLAY mode.
• This will display one of the snapshots in memory, along with
some information about the settings used to shoot it (page
272).
• The file type icon that appears at the top of the monitor
screen depends on the type of file (snapshot, movie,
audio only, etc) that is currently displayed.
– : Snapshot (page 151)
– : Movie (page 153)
– : Audio snapshot (page 152)
• See page 57 information about how to hide the image
information and view the image alone.
2. Use [W] and [X] to scroll between images.
Press [X] to scroll forward and [W] to scroll back.
Viewing a Snapshot
[]
File Type
Folder/File Names
Image Quality
Image Size
Date and Time
[X][X]
[W][W]
152
VIEWING SNAPSHOTS AND MOVIES
NOT
E
• Holding down [W] or [X] scrolls at high speed.
• The image that initially appears when scrolling may appear
to be a bit rough at first, but it will soon be replaced by an
image with better definition. Note that if you copy an image
from another type of digital camera, only a rough image
may be shown on the monitor screen.
To switch to the REC mode
Press [ ].
Listening to the Audio of an Audio
Snapshot
You can use the following procedure to play the audio of an
audio snapshot. An audio snapshot is indicated by the “ ” file
type icon.
1. Enter the PLAY mode
and then use [W] and
[X] to display the
audio snapshot whose
audio you want to
play.
2. Press [SET] to play the snapshot’s audio from
the camera’s built-in speaker.
153
VIEWING SNAPSHOTS AND MOVIES
Audio Playback Controls
You can adjust volume while playback is in progress or paused
only.
Use the following procedure to view a movie on the camera’s
monitor screen.
1. Enter the PLAY mode and then use [W] and
[X] to display the movie you want to play.
• Check the file type icon. The file type icon of a movie is
“” (Movie) icon (page 272).
The film-like frame that appears on the monitor screen
indicates that this is an image from a movie.
2. Press [SET] to start playback.
• The monitor screen will return to the selection screen in
step 1 after the end of the movie is reached.
To do this: Do this:
Fast forward or fast reverse
playback
Hold down [X] or [W].
Pause or restart playback Press [SET].
Adjust volume Use [S] and [T].
Change on-screen indicators Press [DISP].
Stop playback Press [MENU].
Viewing a Movie
Folder Name/File Name
File Type
Quality
Recording Time
154
VIEWING SNAPSHOTS AND MOVIES
To switch to the REC mode
Press [ ].
Movie Playback Controls
IMPORTANT!
• Playback may not be possible for movies not recorded with
this camera.
To do this: Do this:
Fast forward or fast reverse playback.
• Each press of either button increases
the speed of the fast forward or fast
reverse operation up to three steps.
Hold down [X] or
[W].
Return from fast forward/fast reverse to
normal playback
Press [SET].
Pause or restart playback Press [SET].
When paused, scroll forward or back
frame-by-frame
• Hold down either button to scroll non-
stop.
Press [X] or [W].
Adjust volume
• Volume can be adjusted only while
movie playback is in progress.
Use [S] and [T].
Toggle on-screen indicators on or off Press [DISP].
Zoom in up to 4.5X
• While an image is zoomed, you can use
[S] [T] [W] and [X] to move around and
view the parts of the image that do not
fit on the monitor screen.
Press the zoom
button ( ).
Stop playback Press [MENU].
To do this: Do this:
155
VIEWING SNAPSHOTS AND MOVIES
Playing Back a Movie with Anti Shake
Use the following procedure when you want to play back a
movie with Anti Shake. Anti Shake is particularly useful when
you have the camera connected to a TV for viewing, since the
effects of camera movement are more evident on a big screen.
1. In the PLAY mode, use [W] and [X] to display
the movie you want to play with Anti Shake.
2. Press [ ] to turn on Anti Shake.
• Each press of [ ] toggles Anti Shake on and off.
• “ ” (Anti Shake indicator) is displayed on the monitor
screen while Anti Shake is turned on.
3. After the setting is the way you want, press
[SET].
NOT
E
• You can press [ ] to turn Anti Shake on and off while the
movie is stopped or playing.
• You can also use the following procedure to turn Anti
Shake on and off.
1. While a movie is playing, press [MENU].
2. Select the “PLAY” tab, select “ Anti Shake”, and
then press [X].
3. Use [S] and [T] to select “On”, and then press [SET].
• When Anti Shake is turned on, the area of the monitor
screen used for playback is slightly smaller than normal.
156
VIEWING SNAPSHOTS AND MOVIES
The slideshow feature lets you play the files stored in memory in
sequence, automatically.
You can configure the slideshow so it plays the files the way you
want.
1. In the PLAY mode, press [MENU].
2. On the “PLAY” tab, select “Slideshow” and
then press [X].
3. Configure the slideshow settings.
Use [S] and [T] to select an item and then configure it as
described below.
Playing a Slideshow on the Camera
Images
(Select the
files you want
to include in
the
slideshow.)
• All images: Includes all snapshots, movies,
and audio in memory.
• Only: Includes snapshots and audio
snapshots only.
• Only: Includes movies only.
• One Image: Includes only one specific
image (selected using [W] and [X]).
• Favorites: Includes snapshots in the
FAVORITE folder (page 192).
Time (Specify
the time of the
slideshow,
from start to
finish.)
Use [W] and [X] to select one of the following
times (in minutes): 1, 2, 3, 4, 5, 10, 15, 30,
60.
Interval
(Select the
interval
between
slides.)
Use [W] and [X] to select a value from 1 to 30
seconds, or “MAX”.
–If you specify a value from 1 to 30
seconds, images change at the
specified interval, but the audio portion
of movies and audio snapshots will
continue to play until the end,
regardless of the interval setting.
– When “MAX” is selected, only the first
frame of each movie is displayed,
without any playback of the audio.
157
VIEWING SNAPSHOTS AND MOVIES
4. Use [S] and [T] to select “Start” and then
press [SET] to start the slideshow.
The slideshow is performed in accordance with the settings
you configured above.
• You can also scroll through images during a slideshow by
pressing [X] (forward) and [W] (back). Note that this
operation is not possible when “Pattern 5” is selected for
the “Effect” setting.
• To adjust the level of audio volume during a slideshow,
use [S] and [T] to adjust the volume.
To stop a slideshow
Press [SET]. This will return to the PLAY mode.
• Pressing [MENU] instead of [SET] stops the slideshow and
returns to the menu screen.
• Pressing [ ] instead of [SET] stops the slideshow and
switches to the REC mode.
Effect (Select
a special
effect.)
Use [S] and [T] to select the effect you
want.
• Pattern 1, 2, 3, 4, 5: Plays background
music and applies an image change effect.
– Pattern 1 through 4 use the same
special effects but each use different
background music. Pattern 5 uses
different effects from patterns 1 through
4.
– Selecting “Pattern 5” changes the
“Images” setting to “ Only” and
disables the “Interval” setting.
• Off: No background music plays and no
image change effect is performed.
The current effect setting is disabled
automatically in following cases.
– When the “Images” setting is “
Only”, “One Image”, or “Favorites”.
– When the “Interval” setting is “MAX”,
one second, or two seconds.
– When the slideshows changes to or
from a movie file or a voice recording
file.
B
158
VIEWING SNAPSHOTS AND MOVIES
IMPORTANT!
• All button operations are disabled while the slideshow is
switching from one image to another. Wait until an image is
stopped on the display before performing a button
operation. If a button does not work, wait a bit and try
again.
NOT
E
• Selecting a movie when “One Image” is selected for
“Images” and then selecting a movie for the slideshow will
cause the movie to play back repeatedly within the time
specified by the slideshow “Time” setting.
• In image copied from a compu ter or an image recorded
with a different type of digital camera may remain on the
screen longer than the time specified by “Interval”.
■ Changing the Background Music
You can change from the built-in background music that plays
when you execute “Effect” to other background music.
● Supported File
File Types: IMA ADPCM format WAV files
Sampling Frequencies: 22.05 kHz/44.1 kHz
Audio: monaural
● Number of Files: 9
● File names: SSBGM001.WAV to SSBGM009.WAV
• Store the music files on your computer using the above
names.
IMPORTANT!
• Regardless of which effect pattern is selected, the
background music is looped.
• Depending on the BGM file format, some background
music data may not be playable.
159
VIEWING SNAPSHOTS AND MOVIES
Transferring Background Music to the Camera
You can select background music after its file has been saved to
the memory card or the camera’s built in memory.
1. Connect the camera to your computer (pages
226, 245).
• If you save a background music file to a memory card,
load the card into the camera.
2. Perform one of the following operations to
open the memory card or built-in memory.
• Windows
1
Based on your operating system, perform one of the
following steps.
Windows XP users: Click “Start” and then “My
Computer”.
Windows Vista users: Click “Start” and then
“Computer”.
Windows 2000/Me/98SE/98 users: Double-click “My
Computer”.
2
Double-click “Removable Disk”.
Your computer recognizes the memory card loaded in
the camera (or built-in memory if there is no card) as a
removable disk.
• Macintosh
1
Double-click the camera’s drive icon.
Your computer recognizes the memory card loaded in
the camera (or built-in memory if there is no card) as a
drive.
3. Create a folder named “SSBGM”.
4. Double-click the “SSBGM” folder you created
and copy the background music file to it.
5. Disconnect the camera from the computer
(pages 232, 250).
160
VIEWING SNAPSHOTS AND MOVIES
IMPORTANT!
• The background music files will be loop played in
sequence.
• If both the memory card loaded in the camera and the
camera’s built-in memory contain background music files,
the files on the memory card are played.
• See the user documentation that comes with your
computer for information about moving, copying, and
deleting files.
● Folder Structure
Memory Card or Built-in Memory
(Background Music Folder)
(Background Music File)
(Background Music File)
■ Playing a Slideshow on the USB Cradle
(Photo Stand)
You can play a slideshow on the camera while it is mounted on
the USB cradle. This is a good way to enjoy a long slideshow,
without worrying about the camera’s battery going dead.
• Configure slideshow settings (page 156) before performing
the steps below.
• Connect the bundled AC adaptor to the USB cradle, and plug
it into a power outlet.
1. Turn off the camera and place it onto the USB
cradle.
DCIM
SSBGM
SSBGM001.WAV
SSBGM002.WAV
161
VIEWING SNAPSHOTS AND MOVIES
2. Press the USB cradle’s
[PHOTO] button to start
the slideshow.
The slideshow is performed in
accordance with the settings
you configured with the
procedure on page 156. The
camera will turn off
automatically after the time you specified with the “Time”
setting elapses.
• You can change the slideshow setting by pressing
[MENU] while a slideshow is in progress. After
configuring the settings, press [MENU] again to restart
the slideshow.
• To adjust the level of audio volume during a slideshow,
use [S] and [T] to adjust the volume.
To stop a slideshow
Press the USB cradle’s [PHOTO] button. This will turn off the
camera.
IMPORTANT!
• The battery does not charge while a slideshow is in
progress. To charge the battery, stop the slideshow.
• Do not remove the camera from the cradle while a
slideshow is in progress. Doing so can cause data to
become corrupted.
NOT
E
• You can connect the USB cradle to a TV and enjoy the
slideshow on a big screen. You can also connect to a video
recording device and record a slideshow (page 162).
[PHOTO]
162
VIEWING SNAPSHOTS AND MOVIES
Use the procedure below to view snapshots and movies on a TV
screen.
1. Connect the USB cradle to a TV.
2. Turn off the camera and place it onto the USB
cradle.
3. Turn on the TV and select its video input
mode.
If the TV has more than one video input, select the one
where the USB cradle is connected.
4. Press [ ] (PLAY) to turn on the camera and
enter the PLAY mode.
When the camera turns on in the PLAY mode, an image will
appear on the TV screen. The camera’s monitor screen will
not turn on.
• Pressing [ON/OFF] or [ ] (REC) will not turn on the
camera.
5. Now you can perform the applicable operation
on the camera for the type of file you want to
play.
• At this point you could press the USB cradle’s [PHOTO]
button to start a slideshow (page 161).
To turn off the camera
You can turn off the camera by doing either of the following.
• Press the camera’s [ON/OFF] button.
• Press the USB cradle’s [USB] button.
Viewing Camera Images on a TV
Yellow
VIDEO IN Jack (Yellow)
White
TV
AUDIO IN Jacks (White)
AV Cable
[AV OUT] (AV output port)
Video
Audio
163
VIEWING SNAPSHOTS AND MOVIES
IMPORTANT!
• When connecting to a TV to display images, be sure to
configure the camera’s [ ] (REC) and [ ] (PLAY)
buttons for “Power On” or “Power On/Off” (page 208).
• All icons and indicators that appear on the monitor screen
also appear on the TV screen.
You can use [DISP] to change the display contents.
• Audio is monaural.
• Certain TVs may cut off part of the images.
• Audio is initially output by the camera at maximum volume.
When you first start displaying images, set the TV volume
control at a relatively low level and then adjust it as
required.
NOT
E
• After using an optionally available AV cable (EMC-3A) to
connect the camera’s cradle connector directly to the
VIDEO IN terminal of a TV (without using the USB cable),
you can view recorded images on the TV.
• You can use the camera’s USB cradle to connect to a DVD
recorder or video deck and record images from the camera.
There are various different methods you can use in order to
connect to another device when recording images. The
following describes one method for connection using the
AV cable that comes with the camera.
– DVD recorder or video deck: Connect to the VIDEO IN
and AUDIO IN terminals.
– USB cradle: Connect to the [AV OUT] (AV output port)
– Camera: Place onto the cradle
You can play a slideshow of snapshots and movies on the
camera and record it on a DVD or video tape. You can
record movies by selecting “ Only” for the slideshow
“Images” setting (page 156). When recording to DVD
recorder or video deck, you can turn off display information
(page 57) so indicators and other information is not
recorded along with the image.
To view the image that is being recorded, connect a TV or
other monitor to the DVD recorder or video deck that is
connected to the camera. For information about connecting
a monitor to the DVD recorder or video deck and about how
to record, see the user documentation that comes with the
DVD recorder or video deck you are using.
164
VIEWING SNAPSHOTS AND MOVIES
■ Selecting the Screen Aspect Ratio and Video
Output System
You can use the procedure in this section to select either NTSC
or PAL as the video output system. You can also specify an
aspect ratio of 4:3 or 16:9.
1. Press [MENU].
2. On the “Set Up” tab, select “Video Out” and
then press [X].
3. Use [S] and [T] to select the setting you want
and then press [SET].
IMPORTANT!
• Select the aspect ratio (4:3 or 16:9) that matches the type
of TV you plan to use. You may also need to configure the
aspect ratio setting on your TV as well. Incorrect aspect
ratio settings on the camera and/or the TV can result in
abnormal image display.
• Images will not display correctly unless the camera’s video
signal output setting matches the video signal system of
the TV or other video equipment.
• Images will not display correctly on a TV or video
equipment that is not NTSC or PAL.
For this type of TV:
Select this video
output system:
Standard aspect ratio screen NTSC
TV (Japan, U.S., and other countries)
NTSC 4:3
Wide aspect ratio screen NTSC TV
(Japan, U.S., and other countries)
NTSC 16:9
Standard aspect ratio screen PAL TV
(Europe and other areas)
PAL 4:3
Wide aspect ratio screen PAL TV
(Europe and other areas)
PAL 16:9
165
VIEWING SNAPSHOTS AND MOVIES
Perform the following procedure to zoom the image currently on
the monitor screen up to eight times its normal size.
1. In the PLAY mode, use [W] and [X] to display
the snapshot you want to zoom.
2. Press the zoom button
().
Each press of this button
zooms the image more.
You can use [S], [T], [W],
and [X] to move to a different
part of the image after
zooming.
To zoom back out, press the zoom button ( ).
• If display indicators are turned on, an indicator in the lower
right corner of the monitor screen shows what part of the
zoomed image is currently displayed.
To scroll images during zoom
After performing a zoom operation, you can scroll between
snapshots by pressing [SET] and then using [W] and [X] to
scroll.
• When the snapshot you want is displayed, press [SET] again
to return [W] and [X] to their zoom functions.
To return to image to normal size
Press [MENU] or [BS].
IMPORTANT!
• Depending on the image size, some images may not be
able to be zoomed to the fu ll 8 times normal size.
Zooming the Displayed Image
Image Area
Zoom Factor
Part of the image that is
currently displayed.
166
VIEWING SNAPSHOTS AND MOVIES
You can use the procedure below to display a screen that shows
12 images.
1. Press the zoom button
().
This displays the 12-image
screen with a selection
boundary around the last
image that was on the
monitor screen.
2. Select the image you want.
• Use [W] and [X] to scroll between 12-image screens.
• To view the full-screen version of a particular image, use
[S], [T], [W], and [X] to move the selection boundary to it
and then press [SET].
Use the following procedure to display a calendar, which shows
the first image recorded on each date of a particular month. This
screen helps to make searching for an image quicker and
easier.
1. In the PLAY mode,
press the zoom button
( ) twice.
This displays the calendar
screen.
• You can also display the
calendar by pressing
[MENU], selecting the
“PLAY” tab, selecting
“Calendar”, and then
pressing [X] to display the
calendar.
• To exit the calendar screen, press [MENU] or [BS].
Using the 12-image Screen
Selection Boundary
Using the Calendar Screen
Selection Boundary
Year/Mont
h
167
VIEWING SNAPSHOTS AND MOVIES
2. Use [S], [T], [W], and [X] to move the
selection boundary to the date whose image
you want to view and then press [SET].
This will display the first image recorded on that date.
NOT
E
• The year and month on the calendar is displayed using the
same format as you selected for the “Date Style” setting
(page 203).
IMPORTANT!
• Note following points about how certain editing functions of
the camera affect the date with which the image is
associated on the calendar screen.
Performing this type of
editing operation:
Will associate the resulting
image with this date:
Keystone, Color
Correction, Resize,
Trimming, Copy, Layout
Print, MOTION PRINT
The date that the editing
operation was performed
Editing the date and time
of an image
The date that the original
image was recorded
168
VIEWING SNAPSHOTS AND MOVIES
Image Roulette scrolls through images on the monitor screen,
finally stopping randomly at a final image. It puts some fun into
image viewing that you can use for game playing, to award
prices, for fortunetelling, and just about anything else you can
imagine.
1. While the camera is turned off, hold down [W]
and [ ] (PLAY).
• Keep the buttons depressed until an image appears on
the display.
2. Release the buttons when Image Roulette
starts.
• The screen will scroll through images and finally stop at
one of them.
To perform another Image Roulette operation
Press [W] or [X].
To stop Image Roulette
Press [ ] (REC) to enter the REC mode or press [ON/OFF] to
turn off the camera.
• The camera will exit Image Roulette automatically you do not
perform the next Image Roulette operation within about one
minute after the final image of the previous operation
appeared on the monitor screen.
IMPORTANT!
• Image Roulette does not play audio or movie files.
• For a rotated snapshot (page 175), the Image Roulette
screen shows the unrotated version of the image.
• Note that Image Roulette works only with images shot with
this camera. Image Roulette may not operate properly
when other types of images are in memory.
• You can use Image Roulette only when “[ ] and [ ]”
are configured for “Power On” or “Power On/Off” (page
208).
Using Image Roulette
169
EDITING IMAGES
EDITING IMAGES
You can reduce the size of a snapshot and save the result as a
separate snapshot. The original snapshot is also retained. You
can resize a snapshot to any one of the following sizes.
* M stands for “Mega”, which means “million”.
1. In the PLAY mode, press [MENU].
2. On the “PLAY” tab, select “Resize” and then
press [X].
3. Use [W] and [X] to scroll through images and
display the one you want to resize.
4. Use [S] and [T] to select an image size, and
then press [SET].
• When you select an image size, it will start to cycle
through the following information:
Image Size Number of Pixels Print Size .
The print size indicates the optimum paper size for
printing a snapshot of the selected image size.
5. After you press [SET] in step 4 to resize the
image, the monitor screen returns to step 3.
From there you can repeat steps 3 and 4 to
resize another image if you want.
To exit the resize operation, select “Cancel”.
Resizing a Snapshot
Image Size (Pixels) Print Size
Larger
Smaller
6M* 2816 × 2112 A3 Print
4M 2304 × 1728 A4 Print
VGA 640 × 480
E-Mail
• Optimum size for an image
to be attached to e-mail.
170
EDITING IMAGES
IMPORTANT!
• You cannot resize a VGA (640 × 480 pixels) size image.
• Resizing a snapshot shot with an aspect ratio of 16:9 or 3:2
will cause the left and right sides of the image to be cut off.
The aspect ratio of the resulting image will be 4:3.
• The recording date of the resized version of the snapshot
will be the same as the recording date of the original
snapshot.
You can crop a snapshot to trim parts you do not need, and save
the result in a separate file. The original snapshot is also
retained.
1. In the PLAY mode, use [W] and [X] to scroll
through images and display the snapshot you
want to crop.
2. Press [MENU].
3. On the “PLAY” tab,
select “Trimming” and
then press [X].
• This operation can be
performed only while a
snapshot is on the monitor
screen.
Cropping a Snapshot
Represents Snapshot
Area
Zoom Factor
Part of image that is
currently displayed.
171
EDITING IMAGES
4. Use the zoom button to zoom, and [S], [T],
[W], and [X] to move around the zoomed
image to display the part you want to extract.
5. Press [SET] to extract the displayed part and
save it as a separate file.
• To exit the cropping procedure at any time before you
press [SET], press [MENU].
IMPORTANT!
• The image produced by cropping a 3:2 or 16:9 image will
have an aspect ratio of 4:3.
• The recording date of the extracted image will be the same
as the recording date of the original snapshot.
Use the following procedure to correct the snapshot of a
blackboard, document, poster, photograph, or other rectangular
object that is out of square because it was recorded at an angle.
Performing keystone correction on an image causes a new
(corrected) 2M (1600 × 1200 pixels) size image to be stored as a
separate file.
1. In the PLAY mode, use [W] and [X] to scroll
through images and display the snapshot you
want to correct.
2. Press [MENU].
3. On the “PLAY” tab, select “Keystone” and
then press [X].
This displays screen that shows all of the rectangular
shapes in the image that qualify as candidates for keystone
correction.
• Note that the above step is possible only when there is a
snapshot displayed on the monitor screen.
Keystone Correction
172
EDITING IMAGES
4. Use [W] and [X] to
select the candidate
you want to correct.
5. Use [S] and [T] to select “Correct” and then
press [SET].
• Select “Cancel” to exit the procedure without performing
keystone correction.
IMPORTANT!
• If the original image is smaller than 2M (1600 × 1200
pixels) size, the new (corrected) version will be the same
size as the original one.
• When you display a corrected image on the camera’s
monitor screen, the date and time indicate when the image
was originally recorded, not when the image was corrected.
Color restoration let you correct the old color of a photograph
shot with a digital camera. This function is useful for correcting
existing old photographs, posters, etc.
• Performing color restoration on an image causes a new
(restored) 2M (1600 × 1200 pixels) size image to be stored as
a separate file.
1. In the PLAY mode, use [W] and [X] to scroll
through images and display the snapshot you
want to correct.
2. Press [MENU].
3. On the “PLAY” tab, select “Color Correction”
and then press [X].
4. Use [W] and [X] to select the photograph
candidate you want.
5. Use [S] and [T] to select “Trim”, and then
press [SET].
This displays a cropping boundary on the monitor screen.
• To exit color restoration without storing anything, select
“Cancel”.
Using Color Restoration to Correct the
Color of an Old Photograph
173
EDITING IMAGES
6. Press the zoom button to zoom the cropping
boundary.
7. Use [S], [T], [W], and [X] to move the
selection boundary to the desired location and
then press [SET].
The camera will correct color automatically and save the
corrected image.
• If you do not want a border around the resulting image,
select and area that is smaller than the original image.
• To exit color restoration without saving anything, press
[MENU].
IMPORTANT!
• If the original image is smaller than 2M (1600 × 1200
pixels) size, the new (restored) version will be the same
size as the original one.
• When you display a restored image on the camera’s
monitor screen, the date and time indicate when the image
was originally recorded, not when the image was corrected.
NOT
E
• If you want to record the image of an old photograph with
this camera and restore the resulting image, see “Restoring
an Old Photograph” on page 115.
174
EDITING IMAGES
Use the procedure in this section to change the date and time of
a previously recorded image.
1. In the PLAY mode, use [W] and [X] to display
the image whose date and time you want to
edit.
2. Press [MENU].
3. On the “PLAY” tab, select “Date/Time” and
then press [X].
4. Set the date and the time you want.
5. When all the settings are the way you want,
press [SET] to apply them.
• After editing the time and date, display the image to
confirm that the date and time are correct.
IMPORTANT!
• The date and time stamped into an image using the Time
Stamp feature cannot be edited (page 141).
• You cannot edit the date and time of an image that is
protected. Unprotect the image and then edit the date and
time.
• You can specify any date in the range of January 1, 1980 to
December 31, 2049.
Editing the Date and Time of an Image
To do this: Do this:
Change the value at the cursor
location
Press [S] or [T].
Move the cursor between settings Press [W] or [X].
Toggle between 12-hour and 24-
hour timekeeping
Press [BS].
175
EDITING IMAGES
Perform the following procedure to rotate the image (snapshot or
movie) currently on the monitor screen. This feature comes in
handy with a snapshot that you shot using portrait (vertical)
orientation. After rotating a snapshot, you can return it to its
original orientation, if you want.
• Note that this procedure does not actually change the image
data. It simply alters how the snapshot is displayed on the
camera’s monitor screen.
1. In the PLAY mode, press [MENU].
2. On the “PLAY” tab, select “Rotation” and then
press [X].
• This operation can be performed only while a snapshot or
movie image is on the monitor screen.
3. Use [W] and [X] to select the snapshot whose
display image you want to rotate.
4. Use [S] and [T] to select “Rotate” and then
press [SET].
• Each press of [SET] will rotate the displayed image 90
degrees left.
5. When the displayed image is at the orientation
you want, press [MENU].
IMPORTANT!
• You cannot rotate an image that is protected. To rotate a
protected snapshot, first remove its protection (page 190).
• Zoomed images cannot be rotated.
• The original (unrotated) version of a snapshot’s image will
be displayed on the 12-image screen and the calendar
screen.
• Movies can be rotated on the camera’s monitor screen
only. The movie is not rotated when played on a computer
screen.
Rotating an Image
176
EDITING IMAGES
You can use the following procedure to insert snapshots into the
frames of a layout and produce a new image that contains
multiple snapshots.
1. In the PLAY mode, use [W] and [X] to select
the first snapshot you want to include in the
layout.
2. Press [MENU].
3. On the “PLAY” tab,
select “Layout Print”,
and then press [X].
• This operation can be
performed only while a
snapshot is on the monitor
screen.
4. Use [W] and [X] to
select the type of
layout you want and
then press [SET].
5. Use [W] and [X] to select a background color.
6. Press [SET].
Combining Multiple Snapshots into a
Single Image (Layout Print)
• Layout pattern
(Two Images)
• Layout pattern
(Three Images)
177
EDITING IMAGES
7. Use [W] and [X] to select the snapshot for the
layout and then press [SET].
8. Repeat steps 6 and 7 for all of the other frames
in the layout.
The final layout image will be saved after you insert the final
snapshot into it.
• Pressing [MENU] returns to the PLAY mode screen
without saving the layout image.
• You will not be able to save the new image unless there is
a snapshot in all of the layout frames.
IMPORTANT!
• Layout Print is not supported when the image size is “3:2
(3264 × 2176 pixels)” or “16:9 (3264 × 1840 pixels)”.
• When you display a layout image on the camera’s monitor
screen, the date and time indicates when the last image
added to the layout was originally recorded, not when the
image was laid out.
• The size of the multi-snapshot image for this operation is
fixed automatically at 7M (3072 × 2304 pixels).
You can use the white balance setting to select a light source
type for a recorded image, which will affect the colors of the
image.
1. In the PLAY mode, use [W] and [X] to display
the image whose white balance setting you
want to change.
2. Press [MENU].
3. Select the “PLAY” tab, select “White Balance”,
and then press [X].
• Note that the above step is possible only when there is a
snapshot displayed on the monitor screen.
4. Use [S] and [T] to select a white balance
setting, and then press [SET] to apply it.
Adjusting White Balance of a
Recorded Image
When you want the image to appear
like it was recorded under these
conditions:
Select this
setting:
Outdoors, fair weather (Daylight)
Outdoors, cloudy to rain, in tree shade,
etc.
(Overcast)
C
178
EDITING IMAGES
• Normally, the initially selected white balance setting on
the above menu is the one that was used when you
originally recorded the image. If you used the “Auto” or
“Manual” white balance setting when you recorded the
image, “Cancel” will be selected (page 132).
• If you select the same white balance setting as the one
you selected when you originally recorded the image,
pressing [SET] will exit the white balance adjustment
menu without changing the image.
IMPORTANT!
• Adjusting the white balance of an image creates a new
image with the new white balance setting. The original
image also remains in memory.
• When you display an image whose white balance has been
adjusted on the camera’s monitor screen, the date and time
indicates when the image was originally recorded, not
when the white balance was adjusted.
Use the following procedure to adjust the brightness of
snapshots.
1. In the PLAY mode, use [W] and [X] to scroll
through images and display the one whose
brightness you want to adjust.
2. Press [MENU].
3. Select the “PLAY” tab, select “Brightness”,
and then press [X].
• Note that the above step is possible only when there is a
snapshot displayed on the monitor screen.
In a location where color temperature is
very high, like in the shade of a
building, etc.
(Shade)
Under white or daylight white
fluorescent lighting, without
suppressing color cast
(Day
White
Fluorescent)
Under daylight fluorescent lighting,
while suppressing color cast
(Daylight
Fluorescent)
Under incandescent lighting, while
suppressing color cast
(Tungsten)
Cancel white balance adjustment Cancel
N
D
Adjusting Image Brightness
C
179
EDITING IMAGES
4. Use [S] and [T] to select the setting you want,
and then press [SET].
• To cancel the brightness adjustment operation, press [W]
or [MENU].
IMPORTANT!
• Adjusting the brightness of an image creates a new image
with the new brightness level. The original image also
remains in memory.
• When you display a brightness adjusted image on the
camera’s monitor screen, the date and time indicates when
the image was originally recorded, not when the brightness
was adjusted.
You can use the following procedure to reduce underexposure
only, while maintaining the bright areas of an image.
1. In the PLAY mode, use [W] and [X] to select
the image you want to correct.
2. Press [MENU].
3. On the “PLAY” tab, select “Dynamic Range”,
and then press [X].
4. Use [S] and [T] to select the setting you want
and then press [SET].
To get this: Select this setting:
Brighter
Darker
+2
+1
0
–1
–2
Reducing the Effects of
Underexposure
When you want to do this:
Select this
setting:
Apply Dynamic Range to a greater
extent than “Expand +1”
Expand +2
Reduce underexposure Expand +1
C
180
EDITING IMAGES
IMPORTANT!
• Performing Dynamic Range correction on an image causes
the new (corrected) version to be stored as a separate file.
• When you display a corrected image on the camera’s
monitor screen, the date and time indicates when the
image was originally recorded, not when the image was
corrected.
You can perform the following cut operations on the camera to
edit movies you have recorded.
IMPORTANT!
• When you edit a movie, only the result is saved. The
original movie is not retained. Once you perform an editing
operation, you will not be able to undo it.
• A movie that is shorter than five seconds cannot be edited.
• The movie editing operation is supported only for movies
that were recorded with this camera.
• You will not be able to edit a movie if the amount of
remaining memory capacity is less than the size of the
movie file you want to edit. If there is not enough memory
available, delete any files you no longer need to free up
more.
• Cutting a movie into two parts or splicing of two movies in
to a single movie cannot be performed on the camera.
1. Play back the movie you want to edit.
2. Press [SET] to pause
playback.
• Check to make sure that
“” (cut icon) is
displayed on the monitor
screen. If it isn’t, press
[SET] again.
Editing a Movie on the Camera
Operation Description
Cut
(To-Point Cut)
Cuts everything from the current
location to the beginning of the movie.
Cut
(Point-To-Point Cut)
Cuts everything between two points.
Cut
(From-Point Cut)
Cuts everything from the current
location to the end of the movie.
Cut icon
C
181
EDITING IMAGES
3. Press [T].
• You could also perform the following steps in place of
steps 1 through 3 above.
1
In the PLAY mode, select the movie you want to edit
and then press [MENU].
2
On the “PLAY” tab, select “Movie Editing” and then
press [X].
4. Use [S] and [T] to select the cut operation
and then press [SET].
• To cancel movie editing, select “Cancel” and then press
[SET]. This will return to the paused movie playback
screen.
5. Select the frame
(point) where you
want to cut the movie.
• To cancel the cut operation, press [MENU]. This will
return to the screen in step 3.
To do this: Press this button:
Fast forward or fast reverse
playback
[X] or [W]
Pause or unpause movie playback [SET]
Scroll paused playback one frame
forward or back
[X] or [W]
Cut range (red)
C
182
EDITING IMAGES
6. Press [T] to perform the required cut
operation(s).
7. In response to the confirmation message that
appears, use [S] and [T] to select “Yes” and
then press [SET].
• To cancel movie editing, select “No” instead of “Yes” and
then press [SET]. This will return to the paused movie
playback screen.
• The selected cut operation will take considerable time to
complete. Wait until the “Busy... Please wait...” message
disappears from the monitor screen before performing
any operation on the camera. Note that a cut operation
can take a v ery long time if the movie being edited is long.
MOTION PRINT lets you capture a movie frame and use it to
create a snapshot. The snapshot you create can be either of the
two formats described below.
For this type of cut
operation:
Do this:
Cut
(To-Point Cut)
Select the point up to which you
want to cut and then press [T].
Cut
(From-Point Cut)
Select the point from which you
want to cut and then press [T].
Cut
(Point-To-Point Cut)
1.Select the start point of the
center segment and then press
[T].
2.Select the end point of the
center segment and then press
[T].
Creating a Snapshot of a Movie Frame
(MOTION PRINT)
9-frame
Snapshot
This format puts the
selected movie frame
in the center, the four
frames that precede it
along top and the four
frames that follow it
along the bottom.
1-frame
Snapshot
This format creates a
snapshot using the
selected movie frame
only.
C
183
EDITING IMAGES
1. In the PLAY mode, use [W] and [X] to scroll
through images and display the movie that
contains the frame you want to use.
2. Press [MENU].
3. On the “PLAY” tab, select “MOTION PRINT”,
and then press [X].
4. Use [S] and [T] to select either “9 frames” or
“1 frame”.
5. Use [W] and [X] to scroll through the movie
frames and search for the one you want to use
as the image of the snapshot.
• Holding down [W] or [X] scrolls at high speed.
6. After displaying the movie frame you want,
press [SET].
• If you selected “9 frames” in step 4, the camera will create
a 9-frame snapshot with the frame you selected in step 6
in the center.
• If you selected “1 frame” in step 4, the camera will create
a snapshot of the frame you selected in step 6.
IMPORTANT!
• MOTION PRINT is not possible using a movie that was
recorded on a different type of camera.
C
184
USING AUDIO
USING AUDIO
The dubbing feature of your camera lets you add audio to a
snapshot after you shoot it. A snapshot that includes audio
(regardless of whether the audio was recorded on the spot or
added later) is indicated by the “ ” icon.
You can re-record a snapshot’s audio whenever you want.
You can record up to about 30 seconds of audio for a snapshot.
1. In the PLAY mode, use [W] and [X] to scroll
through images and display the snapshot to
which you want to add audio.
2. Press [MENU].
3. On the “PLAY” tab,
select “Dubbing” and
then press [X].
• This operation can be
performed only while a
snapshot is on the monitor
screen.
4. Press the shutter button to start audio
recording.
5. Press the shutter button again to stop audio
recording.
Recording will stop automatically after about 30 seconds if
you do not press the shutter button.
To play back snapshot audio
Perform the steps under “Listening to the Audio of an Audio
Snapshot” on page 152.
Adding Audio to a Snapshot
185
USING AUDIO
■ Re-recording Snapshot Audio
IMPORTANT!
• Note that you cannot restore the original audio once you
delete or re-record the audio of a snapshot.
1. In the PLAY mode, use [W] and [X] to scroll
through images and display the snapshot
whose audio you want to re-record.
2. Press [MENU].
3. On the “PLAY” tab, select “Dubbing” and then
press [X].
4. Use [S] and [T] to select “Delete” and then
press [SET].
• If you just want to delete the audio of the snapshot
without re-recording anything, press [MENU] here and
skip the rest of this procedure.
5. Press the shutter button to start audio
recording.
This deletes the previous recording and replaces it with the
new one.
6. Press the shutter button again to stop audio
recording.
Recording will stop automatically after about 30 seconds if
you do not press the shutter button.
NOT
E
• Your camera supports the following audio data formats.
–Audio Format: WAVE/ADPCM (.WAV extension)
– Approximate Audio File Size: 165 KB (30-second
recording at 5.5 KB per second)
• See page 86 for recording precautions.
• Adding audio (dubbing) is not possible for the following
types of images.
– Images created using MOTION PRINT
– Protected images
B
186
USING AUDIO
Voice Recording lets you record audio only, without a snapshot
or movie.
Using built-in memory only, you get up to about 33 minutes,
43 seconds of Voice Recording.
1. In the REC mode, press [BS].
2. Use [S], [T], [W], and
[X] to select “Voice
Recording” and then
press [SET].
This causes “ ” to appear
on the monitor screen.
3. Press the shutter button to start recording.
• The operation lamp flashes green while recording is in
progress.
• Pressing [SET] during recording will insert a marker into
the recording. During later playback, you will be able to
jump to the markers in the recording.
4. Press the shutter button again to stop audio
recording and return to the screen in step 3.
• Recording also will stop automatically if memory
becomes full.
5. Now you can repeat steps 3 and 4 to record
more, or you can exit this procedure by
pressing [BS] and selecting another BEST
SHOT scene.
When exiting this procedure, select “Auto” for normal image
recording.
Recording Audio Only (Voice
Recording)
Recording Time
Remaining Recording
Time
187
USING AUDIO
NOT
E
• You can also play back Voice Recording data on your
computer using QuickTime.
• Your camera supports the following audio data formats.
–Audio Data: WAVE/ADPCM (.WAV extension)
– Approximate Audio File Size: 165 KB (30-second
recording at 5.5 KB per second)
• See page 86 for recording precautions.
■ Playing Back Voice Recording Data
1. Enter the PLAY mode, and then use [W] and
[X] to display the Voice Recording file you
want to play.
“ ” is displayed in place of an image for a Voice
Recording file.
2. Press [SET] to start
playback.
188
USING AUDIO
Voice Recording Playback Controls
To do this: Do this:
Fast forward or fast reverse playback.
Hold down [X] or
[W].
Pause or restart playback Press [SET].
Jump to a marker in the audio data while
playback is paused.
Press [X] or [W].
Adjust volume
• You can adjust volume only while
playback is in progress or paused.
Use [S] and [T].
Toggle on-screen indicators on or off Press [DISP].
Stop playback Press [MENU].
189
MANAGING YOUR FILES
MANAGING YOUR FILES
Your camera treats each snapshot, movie, and Voice Recording, as a separate file.
You can delete, protect, and copy files as required.
Files are grouped in folders that are created automatically by the camera.
Files and folders have their own unique names, which are assigned automatically by the camera.
• For details about how folders are organized in memory, see “Memory Folder Structure” (page 253).
Files and Folders
Name and Maximum Number Allowed Example
File Each folder can contain up to 9999 files named CIMG0001 through CIMG9999. The
extension on the file name depends on the file type.
• If a folder already contains 9999 files, recording another file will cause a new folder to
be created automatically.
26th file name:
Folders Folders are named from 100CASIO* to 999CASIO*
• There can be up to 900 folders.
* The BEST SHOT mode (page 104) includes a sample scene that optimizes settings for
auction site images. Depending on your camera model, the sample scene is named
either “For eBay” or “Auction”.
– Images recorded with the eBay scene are stored in a folder named “100_EBAY”.
– Images recorded with the Auction scene are stored in a folder named “100_AUCT”.
* The BEST SHOT mode (page 104) also has a scene (named “For YouTube”) that
optimizes movie settings for YouTube. Images recorded with the YouTube scene are
stored in a folder named “100YOUTB”.
100th folder name:
CIMG0026.JPG
ExtensionSerial number
(4 digits)
100CASIO
Serial number (3 digits)
*
190
MANAGING YOUR FILES
NOT
E
• You can view folder and file names on your computer. For
details about how file names are displayed on the camera’s
monitor screen, see page 272.
• The total number of folders and files that is allowed
depends on the image size and quality, and capacity of the
memory card being used for storage.
You can protect an important file to ensure that it cannot be
deleted accidentally.
IMPORTANT!
• Note that even if a file is protected, it will be deleted if you
perform the format operation (pages 14, 50, 209).
■ Protecting a Specific File
1. In the PLAY mode, press [MENU].
2. On the “PLAY” tab, select “Protect” and then
press [X].
3. Use [W] and [X] to scroll through images until
the one you want to protect is on the monitor
screen.
Protecting a File Against Deletion
191
MANAGING YOUR FILES
4. Use [S] and [T] to
select “On” and then
press [SET].
An image that is protected is
indicated by the “ ” icon.
5. Now you can repeat steps 3 and 4 to protect
another image or exit this procedure by
pressing [MENU].
To unprotect a specific file
Perform the procedure under “Protecting a Specific File”, but in
step 4 select “Off” instead of “On”.
■ Protecting All Files in Memory
1. In the PLAY mode, press [MENU].
2. On the “PLAY” tab, select “Protect” and then
press [X].
3. Use [S] and [T] to select “All Files : On” and
then press [SET].
This protects all files currently in memory.
4. Press [MENU].
To unprotect all files in memory
Perform the procedure under “Protecting All Files in Memory”,
but in step 3 select “All Files : Off” instead of “All Files : On”.
192
MANAGING YOUR FILES
The FAVORITE folder is located in the camera’s built-in
memory, and you can use it to store personal snapshots that you
do not want displayed during normal PLAY mode operations.
FAVORITE folder snapshots remain in camera memory, even if
you change to a different memory card.
IMPORTANT!
• The FAVORITE folder can be used for snapshots only.
Saving an audio snapshot in the FAVORITE folder will save
the snapshot part only.
■ Copying a File to the FAVORITE Folder
1. In the PLAY mode, press [MENU].
2. On the “PLAY” tab, select “Favorites” and
then press [X].
3. Use [S] and [T] to select “Save” and then
press [SET].
4. Use [W] and [X] to select the snapshot you
want to copy to the FAVORITE folder.
5. Use [S] and [T] to select “Save”, and then
press [SET].
This saves a copy of the snapshot to the FAVORITE folder.
6. Now you can repeat steps 4 and 5 to save
another image, or press [MENU] twice to exit
this procedure.
IMPORTANT!
• The snapshot copied to the FAVORITE folder is converted
to QVGA size (320 × 240 pixels). A snapshot in the
FAVORITE folder cannot be restored to its original size.
• Snapshots in the FAVORITE folder cannot be copied to a
memory card.
NOT
E
• The number of snapshots that can be stored in the
FAVORITE folder depends on the image quality of each
one, and how much built-in memory capacity is remaining.
Using the FAVORITE Folder
193
MANAGING YOUR FILES
■ Viewing Snapshots in the FAVORITE Folder
1. In the PLAY mode, press [MENU].
2. On the “PLAY” tab, select “Favorites” and
then press [X].
3. Use [S] and [T] to select “Show” and then
press [SET].
4. Use [W] and [X] to
scroll through the
snapshots in the
FAVORITE folder.
5. After you are finished viewing the FAVORITE
folder snapshots, press [MENU] twice to exit
this procedure.
Perform the following steps to view FAVORITE folder
contents on your computer.
1. Remove the memory card from the camera.
2. Place the camera on the USB cradle (which is
connected to the computer).
3. Perform the required operations on your
computer to navigate to the camera’s memory
and display the FAVORITE folder contents.
FAVORITE folder icon
File Name
194
MANAGING YOUR FILES
Files can be copied from the camera’s built-in memory to a
memory card, or from a memory card to built-in memory.
This makes it possible, for example, to perform the following
steps and copy a file from your memory card to another person’s
memory card.
1
Copy the file from your memory card to the camera’s built-in
memory.
2
Remove your memory card and insert the other person’s
memory card.
3
Copy the file from built-in memory to the other memory card.
IMPORTANT!
• You can copy snapshots, movies, audio snapshots, or
Voice Recording files you recorded with your camera.
• You cannot copy a snapshot that is in the FAVORITE
folder.
• When a copied file image appears on the fu ll-month
calendar screen, it is displayed on the date that it was
copied (page 166).
■ Copying All Files in Built-in Memory to a
Memory Card
The following operation copies all files from built-in memory to a
memory card. You cannot copy files individually.
1. Load the memory card to which you want to
copy the files into the camera.
2. Turn on the camera, enter the PLAY mode and
then press [MENU].
3. On the “PLAY” tab, select “Copy” and then
press [X].
4. Use [S] and [T] to select “Built-in Card”
and then press [SET].
This starts the copy operation. Wait until the “Busy... Please
wait...” message disappears from the monitor screen before
performing any operation on the camera.
• After the copy operation is complete, the last file copied
will be displayed on the monitor screen.
Copying Files
195
MANAGING YOUR FILES
■ Copying a Single File from a Memory Card to
Built-in Memory
With this procedure, files must be copied one-by-one.
1. Load the memory card that contains the file
you want to copy into the camera.
2. Turn on the camera, enter the PLAY mode and
then press [MENU].
3. On the “PLAY” tab, select “Copy” and then
press [X].
4. Use [S] and [T] to select “Card Built-in”
and then press [SET].
5. Use [W] and [X] to select the file you want to
copy.
6. Use [S] and [T] to select “Copy” and then
press [SET].
This starts the copy operation. Wait until the “Busy... Please
wait...” message disappears from the monitor screen before
performing any operation on the camera.
• The copied image reappears on the monitor screen after
the copy operation is complete.
7. Now you can repeat steps 5 and 6 to copy
another file, or you can exit this procedure by
pressing [MENU].
NOT
E
• Files are copied to the folder in built-in memory whose
name has the largest serial number.
196
DELETING FILES
DELETING FILES
You can delete files you no longer need, or after you transfer
them to your computer’s hard disk or print them. This frees up
memory for new files.
You can delete one specific file, or you can delete all files
currently in memory.
Here we will explain the different file delete procedures,
including how to delete snapshots from the FAVORITE folders.
IMPORTANT!
• Remember that a file delete operation cannot be undone.
Always make sure that you really no longer need a file
before deleting it.
• A protected file cannot be deleted. To delete a protected
file, first remove its protection (page 190).
• Deleting an audio snapshot deletes both the snapshot and
the audio file.
1. In the PLAY mode,
press [T] ( ).
2. Use [W] and [X] to scroll through the images
until the one for the file you want to delete is
on the monitor screen.
3. Use [S] and [T] to select “Delete” and then
press [SET].
• To exit the delete operation without deleting anything,
select “Cancel”.
4. Now you can repeat steps 2 and 3 to delete
another file.
• You can exit this procedure by pressing [MENU].
Deleting a Specific File
197
DELETING FILES
1. In the PLAY mode, press [T] ( ).
2. Use [S] and [T] to select “All Files Delete”
and then press [SET].
3. In response to the confirmation message that
appears, use [S] and [T] to select “Yes”.
• To cancel the delete operation, select “No” instead of
“Yes”.
4. Press [SET].
• This deletes all of the files and displays the message
“There are no files.”
You can delete a single snapshot, or you can delete all the
snapshots cu rrently in the FAVORITE folder.
1. In the PLAY mode, press [MENU].
2. On the “PLAY” tab, select “Favorites” and
then press [X].
3. Use [S] and [T] to select “Show” and then
press [SET].
4. Press [T] ( ).
5. Use the procedures under “Deleting a Specific
File” and “Deleting All Files” to delete the
snapshots you want.
• You can exit this procedure by pressing [MENU] twice.
Deleting All Files Deleting FAVORITE Folder Snapshots
198
OTHER SETTINGS
OTHER SETTINGS
Your camera lets you configure the following sound settings.
• Type of sound and volume for shutter release and other
operations
• Volume level for movie and Voice Recording playback
■ Selecting the Operation Sound
1. Press [MENU].
2. On the “Set Up” tab, select “Sounds” and then
press [X].
3. Use [S] and [T] to select the operation whose
sound you want to configure (Startup, Half
Shutter, Shutter, Operation) and then press
[X].
4. Use [S] and [T] to select the setting you want
and then press [SET].
Configuring Camera Sound Settings
To do this: Select this setting:
Sound one of the built-in sounds
(1 through 5)
Sound 1 - 5
Turn sound off Off
199
OTHER SETTINGS
■ Setting the Operation Tone Volume Level
1. Press [MENU].
2. On the “Set Up” tab, select “Sounds” and then
press [X].
3. Use [S] and [T] to select “ Operation”.
4. Use [W] and [X] to specify the playback
volume setting you want and then press [SET].
• You can set the volume to one of eight levels in the range
of 0 (lowest) to 7 (highest).
• Setting a volume level of 0 mutes the sound.
NOT
E
• The volume setting you configure here is also applied to
video output (page 162).
■ Setting the Playback Volume Level
You can use this procedure to set the playback volume level for
movies and audio snapshots, independent of the operation tone
volume.
1. Press [MENU].
2. On the “Set Up” tab, select “Sounds” and then
press [X].
3. Use [S] and [T] to select “ Play”.
4. Use [W] and [X] to specify the operation tone
volume setting you want and then press [SET].
• You can set the volume to one of eight levels in the range
of 0 (lowest) to 7 (highest).
• Setting a volume level of 0 mutes the sound.
IMPORTANT!
• The volume setting you configure here does not affect the
video output (page 162).
200
OTHER SETTINGS
You can configure the camera to display a startup screen of an
image you recorded, whenever you turn it on.
• Even if you configure startup screen settings in the PLAY
mode, the startup screen does not appear when turn on the
camera by pressing [ ] (PLAY).
1. Press [MENU].
2. On the “Set Up” tab, select “Startup” and then
press [X].
3. Use [W] and [X] to scroll through the images
until the one you want to use as the startup
screen is on the monitor screen.
4. Use [S] and [T] to select the setting you want
and then press [SET].
NOT
E
• The following are the types of images that you can select
for the startup screen.
– Special startup screen images built into the camera
– Snapshots
–Audio snapshots (Audio does not play.)
• Only one startup screen image can be in effect at any time.
To change the startup screen to another image, simply
overwrite the current image with the new one.
• Formatting built-in memory (page 209) will delete the
current startup screen image.
Turning the Startup Screen On or Off
To do this: Select this setting:
Use the selected image as the
startup screen
On
Turn off the startup screen Off
201
OTHER SETTINGS
Use the following procedure to specify the rule that governs
generation of the serial number used in file names (page 189).
1. Press [MENU].
2. On the “Set Up” tab, select “File No.” and then
press [X].
3. Use [S] and [T] to select the setting you want
and then press [SET].
Specifying the File Name Serial
Number Generation Rule
To have the camera do this:
Select this
setting:
Remember the numbers used for files. Files
will be named using the next sequential
number, even if files are deleted or if a blank
memory card is loaded.
• If a memory card is loaded that already has
files stored on it and the largest sequential
number in the existing file names is greater
than the largest sequential number
remembered by the camera, numbering of
new files will start from the largest
sequential number in the existing file names
plus 1.
Continue
Restart the serial number from 0001 whenever
all files are deleted or when the memory card is
replaced with a blank one.
• If a memory card is loaded that already has
files stored on it, numbering of new files will
start from the largest sequential number in
the existing file names number plus 1.
Reset
202
OTHER SETTINGS
When changing the date and time setting, be sure to do so for
your Home City (the location where you normally use the
camera). If you already have your Home City setting configured
correctly, you can use the procedure under “Setting the Date
and Time for Your Home City” (page 203) to change the current
time setting only, if you want.
IMPORTANT!
• Changing the time and date setting without correctly
configuring your Home City setting first will cause all of the
World Time (page 204) dates and times to be off.
■ Selecting Your Home City
1. Press [MENU].
2. On the “Set Up” tab, select “World Time” and
then press [X].
This displays the current World Time settings.
3. Use [S] and [T] to select “Home” and then
press [X].
4. Use [S] and [T] to select “City” and then
press [X].
5. Use [S], [T], [W], and [X] to select the area
where your Home City is located and then
press [SET].
6. Use [S] and [T] to select your home city and
then press [SET].
7. After the setting is the way you want, press
[SET] to exit the setting screen.
Changing the Camera Date and Time
Setting
203
OTHER SETTINGS
■ Setting the Date and Time for Your Home
City
1. Press [MENU].
2. On the “Set Up” tab, select “Adjust” and then
press [X].
3. Set the date and the time.
4. After all of the settings are the way you want,
press [SET] to exit the setting screen.
■ Changing the Date Format
You can select from among three different formats for the date.
1. Press [MENU].
2. On the “Set Up” tab, select “Date Style” and
then press [X].
3. Use [S] and [T] to select the setting you want
and then press [SET].
Example: December 19, 2007
To do this: Do this:
Move the cursor between settings Press [W] or [X]
Change the setting at the cursor
location
Press [S] or [T]
Toggle between 12-hour and 24-hour
format
Press [BS]
To display the date like this: Select this format:
07/12/19 YY/MM/DD
19/12/07 DD/MM/YY
12/19/07 MM/DD/YY
204
OTHER SETTINGS
NOT
E
• This setting also affects the Operation Panel date format as
shown below (page 55).
You can use the World Time screen to view the current time in
zone that is different from your Home City when you go on a trip,
etc. World Time displays the current time in 162 cities in 32 time
zones around the globe.
Configuring World Time Settings
1.
Press [MENU].
2. On the “Set Up” tab, select “World Time” and
then press [X].
3. Use [S] and [T] to select “World” and then
press [X].
When this date format setting
is selected:
The Operation Panel
date appears as:
YY/MM/DD or MM/DD/YY MM/DD
DD/MM/YY DD/MM
Using World Time
205
OTHER SETTINGS
4. Use [S] and [T] to
select “City” and then
press [X].
• To configure the summer
time setting, use [S] and
[T] to select “DST” and
then select “On”.
• Summer time is used in some areas to advance the
current time setting by one hour during the summer
months.
• Use of summer time depends on the local customs and
laws.
5. Use [S], [T], [W], and [X] to select the area
where the city you want to view is located and
then press [SET].
6. Use [S] and [T] to select the city you want
and then press [SET].
7. After the setting is the way you want, press
[SET] to exit the setting screen.
■ Switching between the Home Time and
World Time Screens
1. Press [MENU].
2. On the “Set Up” tab, select “World Time” and
then press [X].
3. Use [S] and [T] to select “World” for the
World Time screen, or “Home” for the Home
Time screen.
4. After selecting the screen you want, press
[SET] to exit the setting screen.
206
OTHER SETTINGS
You can use the procedure below to select a display text
language.
• The number and types of languages depend on the
geographic area where the camera was marketed.
1. Press [MENU].
2. On the “Set Up” tab, select “Language” and
then press [X].
3. Use [S], [T], [W], and [X] to select the setting
you want and then press [SET].
■ If the display contents are in the wrong
language
Changing the Display Language
1
: Select this tab.
2
: Select the “Language” item.
3
: Select the language you want.
1
23
207
OTHER SETTINGS
You can use the procedure below to change the USB
communication protocol that is used when exchanging data with
a computer, printer, or other external device. Select the protocol
that suits the device to which you are connecting.
1. Press [MENU].
2. On the “Set Up” tab, select “USB” and then
press [X].
3. Use [S] and [T] to select the setting you want
and then press [SET].
Changing the USB Port Protocol
When you want to connect to this type
of device:
Select this
setting:
Computer or a printer that supports USB
DIRECT-PRINT (page 212)
With this setting, the computer sees the
camera as an external storage device.
Use this setting for normal transfer of
images from the camera to a computer
(using the bundled Photo Loader with
HOT ALBUM application).
Mass Storage
(USB DIRECT-
PRINT)
Printer that supports PictBridge (page
212)
This setting simplifies the transfer of
image data to the connected device.
PTP
(PictBridge)
208
OTHER SETTINGS
You configure the camera so it does not turn on when you press
the [ ] (REC) or [ ] (PLAY) button, or to turn off when you
press the [ ] (REC) or [ ] (PLAY) button.
1. Press [MENU].
2. On the “Set Up” tab, select “REC/PLAY” and
then press [X].
3. Use [S] and [T] to select the setting you want
and then press [SET].
NOT
E
• With “Power On/Off”, the camera turns off when you press
[ ] (REC) in the REC mode or [ ] (PLAY) in the PLAY
mode.
• The initial factory default for this setting is “Power On”.
• Change this setting to anything besides “Disable” before
connecting to a TV for image viewing.
[ ] (REC) and [ ] (PLAY) Button
Settings
To configure both keys to do
this when pressed:
Select this setting:
Turn on the camera Power On
Turn on or turn off the camera Power On/Off
Do not turn on the camera Disable
209
OTHER SETTINGS
Formatting built-in memory deletes any data stored in it.
IMPORTANT!
• Note that data deleted by a format operation cannot be
recovered. Check to make sure you do not need any of the
data in built-in memory before you format it.
• Formatting built-in memory also deletes the following.
– Face Recognition data saved with Record Family
– Protected images
– FAVORITE folder images
– BEST SHOT mode user setups
–Startup screen
• Make sure that the battery is charged fully before starting a
formatting operation. Formatting may not be performed
correctly and the camera may stop operating normally if the
camera powers down while formatting is in progress.
• Never open the battery cover while formatting is in
progress. Doing so can cause the camera to stop operating
normally.
1. Check to make sure there is no memory card
loaded in the camera.
• If there is a memory card loaded in the camera, remove it.
2. Press [MENU].
3. On the “Set Up” tab, select “Format” and then
press [X].
4. Use [S] and [T] to select “Format” and then
press [SET].
This formats built-in memory.
• To exit the format operation without formatting, select
“Cancel”.
• Entering the PLAY mode after formatting the built-in
memory will cause the message “There are no files.” to
appear.
Formatting Built-in Memory
B
210
PRINTING
PRINTING
There are three different methods you can use for printing images.
Types of Printing
Professional
Print Service
(page 211)
Take the memory card that contains the images you want to print to a
professional print service.
• You can use DPOF settings to specify which images you want to print, the
number of copies, and date stamp settings before taking the card in for
printing.
Printing at
Home
Printing on a Printer (page 212) Print on a printer that supports PictBridge or USB DIRECT-PRINT, or on a
printer equipped with a memory card slot.
• You can use DPOF settings to specify which images you want to print, the
number of copies, and date stamp settings before printing.
Printing with a Computer ■ Windows Computer
Install the software (Photo Loader with HOT ALBUM) that comes bundled
with the camera.
See “Using the Camera with a Windows Computer” on page 221.
■ Macintosh
After transferring the images to your Macintosh, use commercially available
software to print.
See “Using the Camera with a Macintosh” on page 243.
211
PRINTING
■ Printing Precautions
• See the documentation that comes with your printer for
information about print quality and paper settings.
• Contact the manufacturer of your printer to find out if it
supports PictBridge or USB DIRECT-PRINT, for new printer
versions, etc.
• Never disconnect cables or perform any camera or USB
cradle operation while printing is in progress. Doing so can
cause a printer error.
Take a memory card that contains the images you want to print
to the professional print service. Before taking in a memory card,
you can use the camera’s DPOF settings (page 215) to specify
which images you want printed, the number of copies, and
whether or not the images should include a date stamp.
Using Professional Print Service
212
PRINTING
If your printer is either of the types described below, you can use
it to print without going through a computer.
– Printer equipped with a card slot for the type of memory
card you are using
– Printer that support PictBridge or USB DIRECT-PRINT
■ Printing on a Printer with a Memory Card
Slot
Remove a memory card from the camera and insert it directly
into the printer’s memory card slot. Depending on what type of
printer you are using, it also may be able to read the settings
(images to be printed, number of copies, date stamping) you
configure with the camera’s DPOF settings (page 215). For
details, see the user documentation that comes with your printer.
■ Printing on a Printer that Supports
PictBridge or USB DIRECT-PRINT
You can connect the camera directly to a PictBridge or USB
DIRECT-PRINT compliant printer and print images without going
through a computer.
• The camera’s USB cradle also allows easy connection to a
printer. Before connecting to a printer via the USB cradle, be
sure to perform the following procedure first.
1. Press [MENU].
2. On the “Set Up” tab, select “USB” and then
press [X].
3. Use [S] and [T] to select the setting that suits
your printer and then press [SET].
Using Your Printer to Print Images
For this type of printer: Select this setting:
USB DIRECT-PRINT compatible Mass Storage
PictBridge compatible PTP
213
PRINTING
4. Connect the USB cable that comes bundled
with the camera to the USB cradle and your
printer’s USB port.
• Also, connect the AC adaptor to the cradle and plug the
adaptor into an electrical outlet.
• If you do not plan to use the AC adaptor, make sure that
the camera’s battery is fu lly charged.
• Nothing appears on the camera’s monitor screen if the
camera is on the USB cradle while the bundled AV cable
is connected to the cradle. Be sure to disconnect the AV
cable from the cradle if you want to use the camera’s
monitor screen to view images.
5. Turn off the camera and place it onto the USB
cradle.
6. Turn on the printer.
7. Load paper into the printer.
8. Press the USB cradle’s
[USB] button.
This displays a print menu on
the camera’s monitor screen.
USB Port
USB Cable (Bundled)
Connector
Mini-B
Connector A
[ ] (USB) Connector
214
PRINTING
9. Use [S] and [T] to select “Paper Size” and
then press [X].
10.
Use [S] and [T] to select a paper size and
then press [SET].
• The following are the available paper sizes.
3.5" × 5", 5" × 7", 4" × 6", A4, 8.5" × 11", By Printer
• Selecting “By Printer” prints using a paper size selected
on the printer.
• Available paper settings depend on the connected
printer. For full details, see the user documentation that
comes with your printer.
11.
Use [S] and [T] to specify the print option
you want.
If you want to print a specific image:
Select “1 Image” and then press [SET]. After that, use [W]
and [X] to display the image you want to print.
If you want to print multiple images:
Select “DPOF Printing” and then press [SET]. Next, use
the DPOF settings (page 215) to specify the images you
want to select.
• To toggle date stamping on
and off, press [BS]. The
date stamp will be printed
when “On” is indicated on
the monitor screen.
215
PRINTING
12.
Use [S] and [T] to select “Print” and then
press [SET].
Printing will start and the message “Busy... Please wait...”
will appear on the monitor screen. The message will
disappear after a short while, even though printing is still
being performed. Pressing any camera button will cause the
printing status message to re-appear.
The print menu screen will re-appear when printing is
complete.
• If you selected “1 Image” in step 11, you can repeat the
procedure from step 11 to print other images, if you want.
13.
After you are finished printing, press the USB
cradle’s [USB] button.
This will turn off the camera.
DPOF (Digital Print Order Format) lets you specify
which images you want to print, the number of
copies, and whether date stamping is turned on or
off. The settings you configure are recorded on the
memory card. After configuring settings you can
use the memory card to print on a home printer that supports
DPOF or take the memory card to a professional print service.
With DPOF, you can configure settings while viewing the actual
images on the camera’s monitor screen, so there is no need to
recall hard-to-remember files names, etc.
IMPORTANT!
• Some printers may ignore time stamp settings or may not
support DPOF at all. Check the user documentation that
comes with your printer for details.
• Certain print service providers may not support DPOF or
may support different printing protocols. In this case, you
will need to perform printing in accordance with the
instructions provided by the print service you are using.
Using DPOF to Specify Images to be
Printed and the Number of Copies
216
PRINTING
■ Configuring DPOF Settings Individually for
Each Image
1. In the PLAY mode, press [MENU].
2. On the “PLAY” tab,
select “DPOF Printing”
and then press [X].
3. Use [S] and [T] to select “Select images” and
then press [X].
4. Use [W] and [X] to scroll through the images
until the one you want to print is on the
monitor screen.
5. Use [S] and [T] to specify the number of
copies.
• You can specify up to 99 for the number of copies.
Specify 0 if you do not want to print the image.
6. If you want to include the date in the image,
press [BS] to change the displayed date
stamping setting to “On”.
• To turn off date stamping, press [BS] so “Off” is
displayed.
• Repeat steps 4 through 6 to configure settings for other
images, if you want.
7. After everything is the way you want, press
[SET] to save the settings.
B
217
PRINTING
■ Configuring the Same DPOF Settings for All
the Images
1. In the PLAY mode, press [MENU].
2. On the “PLAY” tab, select “DPOF Printing”
and then press [X].
3. Use [S] and [T] to select “All images” and
then press [X].
4. Use [S] and [T] to specify the number of
copies.
• You can specify up to 99 for the number of copies.
Specify 0 if you do not want to print.
5. If you want to include the date in the images,
press [BS] to change the displayed date
stamping setting to “On”.
• To turn off date stamping, press [BS] so “Off” is
displayed.
6. After everything is the way you want, press
[SET] to save the settings.
Clear DPOF settings when you no longer need them!
DPOF settings are not cleared automatically after printing is
complete. This means that if you perform another printing
operation without clearing DPOF settings, printing will be
performed in accordance with the last settings you configured. If
you no longer need the currently configured DPOF settings, use
the procedure under “Configuring the Same DPOF Settings for
All the Images” to change the number of copies setting for all the
images to 00.
Tell your print service about your DPOF settings!
If you take a memory card to a professional print service, be
sure to tell them that it includes DPOF settings for the images to
be printed and the number of copies. If you don’t, the print
service may print all the images without regard to your DPOF
settings, or they may ignore your date stamp setting.
B
218
PRINTING
Date Stamping
You can use any one of the following three methods to include
the recording date in the printout of an image.
• Configure DPOF settings on the camera to specify date
stamping (page 215)
– If an image already has the date or time stamped into it
using the camera’s Date Stamping feature, turning on
DPOF date stamping will cause the two dates to be
stamped in the same location. Be sure to turn off DPOF
date stamping when printing an image that is stamped with
the camera’s Date Stamping function.
– Some printers may ignore time stamp settings or may not
support DPOF at all. Check the user documentation that
comes with your printer for details.
– Note that some professional print services do not support
DPOF printing. Check with your service before ordering
prints.
• The camera’s Date Stamping feature stamps the date and
time directly into the image data (page 141).
• You can insert dates using the bundled Photo Loader
with HOT ALBUM (page 221) software (Windows only).
• Request date stamping when ordering prints from a
professional print service
– Some print services do not support date printing. Check
with your service for more information.
219
PRINTING
Your camera supports the protocols described below.
■ PictBridge and USB DIRECT-PRINT
• PictBridge
Camera and Imaging Products Association
(CIPA)
• USB DIRECT-PRINT
Seiko Epson Corporation
■ PRINT Image Matching III
Using image editing software and printing on a
printer that also supports PRINT Image Matching
III makes it possible to use information about
shooting conditions that is recorded with the
image, and produce exactly the type of image you
want.
PRINT Image Matching and PRINT Image Matching III are
trademarks of Seiko Epson Corporation.
■ Exif Print
Printing on a printer that also supports Exif
Print (Exif 2.2) uses information about
shooting conditions recorded with the image
to enhance printed image quality.
Contact your printer manufacturer for information about models
that support Exif Print, printer upgrades, etc.
Supported Protocols
220
USING THE CAMERA WITH A COMPUTER
USING THE CAMERA WITH A COMPUTER
Connecting the camera to a computer with the bundled USB
cable provides you with the capabilities described below.
* You can also transfer images to a computer for viewing and
storage without connecting the camera, by removing the
memory card from the camera and reading the contents of the
card with your computer (page 252).
What you can do
View and
store images*
You can use your computer to view camera
images and for long-term storage of images.
Manage, edit,
and print
images
You can manage, edit, and print images
stored on your computer.
• Refer to the explanations later in this
section and install the required software on
your computers.
Transfer
images to the
camera
On a Windows computer (only), you can
transfer images from your computer to
camera memory.
• You can even transfer images that were
not originally recorded with the camera.
You can capture (cut) a portion of the
image (web page, map, etc.) currently on
your computer screen and transfer it to
camera memory.
Transfer
documents to
the camera
You can transfer documents from your
computer to camera memory.
221
USING THE CAMERA WITH A COMPUTER
The procedures you need to perform when using the camera
with your computer and when using the bundled software are
different for Windows and the Macintosh.
• Windows users should refer to “Using the Camera with a
Windows Computer” on page 221.
• Macintosh users should refer to “Using the Camera with a
Macintosh” on page 243.
IMPORTANT!
• This camera supports USB 2.0 Hi-Speed protocol. Though
it can be used with a computer that supports only USB 1.1
protocol, higher speed data transfer becomes possible
when USB 2.0 Hi-Speed is supported. Note that certain
computer models, connecting through a USB hub, and
other system conditions can slow down data transfer and
even cause operational problems.
Install the required software in accordance with what version of
Windows you are running and what you want to do.
Using the Camera with a Windows
Computer
Objective
Windows
Version
Install this software:
See
page:
• Viewing
images on
a computer
• Storing
images on
a computer
Vista/XP/
2000/Me
–
(USB driver not required.)
–
98SE/98
USB driver Type B
• You can download the
USB driver from the
official EXILIM Website at
http://www.exilim.com/
225
Transfer of
images from
the camera
and
management
of images on
the computer
Vista/XP/
2000
Photo Loader with HOT
ALBUM 3.1
DirectX 9.0c (When DirectX
9.0 or higher is not installed
on the computer already.)
232
Play movies XP/2000 QuickTime 7 234
222
USING THE CAMERA WITH A COMPUTER
Edit movies
Vista/XP/
2000
Movie Wizard 3.2 SE VCD
• You also need to install
DirectX, Microsoft
Windows Media Player,
QuickTime 7, and Flash
Player separately.
238
XP/2000
VideoStudio 10 Plus for
CASIO (Trial Version)
• This is the Trial Version
of the software, whose
use is limited to 30 days
following installation.
• You also need to install
DirectX, Microsoft
Windows Media Player,
QuickTime 7, and Flash
Player separately.
238
Me/98SE/
98
–
• Use commercial software
as required.
–
Upload movie
files to
YouTube
Vista/
XP (SP2)/
2000 (SP4)
YouTube Uploader for
CASIO 235
Transfer
images to the
camera
Vista/XP/
2000/Me/
98SE/98
Photo Transport 1.0
239
Transfer
documents to
the camera
Vista/XP/
2000
CASIO DATA
TRANSPORT 1.0 257
Objective
Windows
Version
Install this software:
See
page:
View the
User’s Guide
Vista/XP/
2000 (SP4)
Adobe Reader 8
(Not required if already
installed.)
242
2000/Me/
98SE/98
–
• If your computer does not
already have Adobe
Reader or Adobe Acrobat
Reader installed, go to
the Adobe Systems
Incorporated website to
download and the
version of Adobe Reader
or Adobe Acrobat Reader
that is compatible with
your computer’s
operating system.
–
Objective
Windows
Version
Install this software:
See
page:
223
USING THE CAMERA WITH A COMPUTER
■ Computer System Requirements for
Bundled Software
Computer system requirements are different for each of the
applications. Be sure to check the requirements for the particular
application you are trying to use. Note that the values provided
here are minimum requirements for running each application.
Actual requirements are greater, depending on the number of
images and the sizes of the images being handled.
Photo Loader with HOT ALBUM 3.1
DirectX 9.0c
YouTube Uploader for CASIO
• Sufficient memory to run the operating system
• Computer configuration that enables playback of movies on
the YouTube site
• Computer configuration that enables upload of movies to the
YouTube site
Photo Transport 1.0
CASIO DATA TRANSPORT 1.0
• Sufficient memory to run the operating system
Adobe Reader 8
QuickTime 7
HD : At least 2GB
Other : Internet Explorer 5.5 or higher
DirectX 9.0 or higher
Windows Media Player 9 or higher
QuickTime 7 or higher
HD : 65MB for installation (18MB on hard disk)
Memory : At least 64MB
HD : At least 2MB
CPU : Pentium III Class Processor
Memory : At least 128MB
HD : At least 180MB
Other : Internet Explorer 6.0 or higher
CPU : Pentium or higher
Memory : At least 128MB
OS : Windows 2000 Service Pack 4 / XP
B
224
USING THE CAMERA WITH A COMPUTER
Movie Wizard 3.2 SE VCD
VideoStudio 10 Plus for CASIO (Trial Version)
* 30-day trial version
IMPORTANT!
• For details about the minimum system requirements for
each software application, see the “Read me” files on the
CD-ROM that comes bundled with the camera.
■ Precautions for Windows Vista Users
• Photo Transport and CASIO DATA TRANSPORT will not run
under Windows Vista 64bit Version.
• Photo Transport and CASIO DATA TRANSPORT can be
used only by users logged in with Administrator privileges.
• Operation on a self-made computer or under a dual-processor
environment is not supported.
• Operation may not be possible under certain computer
environments.
• Photo Loader with HOT ALBUM provides a function for
migrating image data previously saved with Photo Loader,
which means you still will have access to your existing image
archives.
CPU : Intel Pentium 4, M, D, or Extreme Edition; or AMD
Athlon 64 or higher
Memory : 256MB of RAM (at least 512MB recommended)
HD : • 250MB space available for program installation
• At least 4GB space available for video capture and
editing
Other : 1024 × 768 or higher display resolution
You also need to install DirectX, Microsoft Windows
Media Player, QuickTime 7, and Flash Player
separately.
CPU : Intel Pentium 4, M, D, or Extreme Edition; or AMD
Athlon 64 or higher
Memory : 512MB of RAM (at least 1GB recommended)
HD : • 1GB space available for program installation
• At least 4GB space available for video capture and
editing
Other : 1024 × 768 or higher display resolution
You also need to install DirectX, Microsoft Windows
Media Player, QuickTime 7, and Flash Player
separately.
225
USING THE CAMERA WITH A COMPUTER
Viewing and Storing Images on a
Computer
You can view and store images (snapshot and movie files) on
your computer by connecting to the camera via its USB cradle.
You can connect the camera to your computer to view and store
images (snapshot and movie files).
• USB driver installation is not required in the case of Windows
Vista, XP, 2000, and Me. Simply connect the camera to your
computer.
• If your computer is running Windows 98SE or 98, you need to
install the USB driver (page 221). You can download the USB
driver from the official EXILIM Website at
http://www.exilim.com/
General Procedure
If your computer is running Windows 98SE or 98, do not
try to establish a connection between the camera and
computer before installing the USB driver on the
computer.
If you do, the computer will not be able to recognize the
camera.
If your computer is running Windows 98SE or 98, be sure to
install the USB driver.
Do not connect the camera to your computer without installing
the USB driver first.
1) Use the USB cradle to connect the camera and computer (page
226).
2) View and copy the images you want (page 229).
226
USING THE CAMERA WITH A COMPUTER
■ Connecting the Camera to Your Computer
the First Time
IMPORTANT!
• If you are not using the AC adaptor to power the camera,
the battery may go low and cause the camera to turn off
while it is in the middle of exchanging files with your
computer. Use of the special AC adaptor is recommended
to power the camera.
1. Connect the bundled AC adaptor to the [DC IN
5.3V] connector of the USB cradle and then
plug it in to a household power outlet.
• If you do not plan to use the AC adaptor, make sure that
the camera’s battery is fu lly charged.
2. Connect the USB cable that comes bundled
with the camera to the USB cradle and the
USB port of your computer.
• Orient the USB plug so it correctly matches the shape of
the USB port when you connect them.
• Plug the USB cable into the ports securely, as far as it will
go. Proper operation is not possible if connections are not
correct.
[ ] (USB) Connector
Connector A
Connector
Mini-B
USB Cable (Bundled)
USB Port
227
USING THE CAMERA WITH A COMPUTER
3. Press the camera’s [ON/OFF] button to turn it
on and then press [MENU].
• Do not place the camera on the USB cradle yet.
4. On the “Set Up” tab, select “USB” and then
press [X].
5. Use [S] and [T] to select “Mass Storage” and
then press [SET].
6. Press the camera’s [ON/OFF] button to turn it
off and then place the camera on the USB
cradle.
• Do not place the camera onto the USB cradle while it is
turned on.
• If you plan to transfer images from the camera’s built-in
memory to your computer, make sure there is no memory
card loaded in the camera.
7. Press the USB cradle’s
[USB] button.
USB Lamp
[USB]
228
USING THE CAMERA WITH A COMPUTER
Camera-Computer Connection
Pressing the cradle’s [USB] button puts it into the USB mode,
which is indicated by the USB lamp lighting green. In this mode,
your computer recognizes the memory card loaded in the
camera (or the camera’s built-in memory if it does not have a
memory card loaded) as a removable disk.
From now on, you will not have to perform steps 3 through 5 in
the above procedure when you connect the camera to your
computer (unless you change the camera’s USB settings for
some reason).
• With some Windows setups, you may see a guidance
message appear on your display to let you know about the
new removable disk. If this happens, simply close the
guidance message dialog box.
IMPORTANT!
• Never disconnect the USB cable or remove the camera
from the USB cradle without exiting the USB mode first.
Doing so can corrupt image data. See “Removing the
Camera from the USB Cradle” on page 232 for the correct
steps you need to perform to remove the camera from the
cradle safely.
229
USING THE CAMERA WITH A COMPUTER
■ Connecting the Camera to Your Computer
after the First Time
Since you need to configure menu settings only the first time you
connect the camera to your computer, later connections are
much simpler.
1. Press the camera’s [ON/OFF] button to turn it
off and then place the camera on the USB
cradle.
2. Press the USB cradle’s
[USB] button.
• Pressing the cradle’s [USB]
button puts it into the USB
mode, which is indicated by
the USB lamp lighting
green.
■ Viewing Camera Images on Your Computer
After connecting the camera to your computer, you can view
camera images on your computer screen.
1. Windows XP users: Click “Start” and then “My
Computer”.
Windows Vista users: Click “Start” and then
“Computer”.
Windows 2000/Me/98SE/98 users: Double-
click “My Computer”.
2. Double-click “Removable Disk”.
• Your computer recognizes the memory card loaded in the
camera (or built-in memory if there is no card) as a
removable disk.
3. Double-click the “DCIM” folder.
4. Double-click the folder that contains the image
you want to view.
[USB]
230
USING THE CAMERA WITH A COMPUTER
5. Double-click the file that contains the image
you want to view.
This displays the image.
• For information about file names, see “Memory Folder
Structure” on page 253.
NOT
E
• An image that was rotated on the camera will be displayed
on your computer screen in its original (unrotated)
orientation.
■ Saving an Image on Your Computer
In order to work on an image or put it into an album, you must
first save it to your compu ter. To save a camera image to your
computer, you must first establish a connection between them
via the camera’s USB cradle.
1. Windows XP users: Click “Start” and then “My
Computer”.
Windows Vista users: Click “Start” and then
“Computer”.
Windows 2000/Me/98SE/98 users: Double-
click “My Computer”.
2. Double-click “Removable Disk”.
• Your computer recognizes the memory card loaded in the
camera (or built-in memory if there is no card) as a
removable disk.
3. Right-click the “DCIM” folder.
231
USING THE CAMERA WITH A COMPUTER
4. On the shortcut menu that appears, click
“Copy”.
5. Windows XP users: Click “Start” and then “My
Documents”.
Windows Vista users: Click “Start” and then
“Documents”.
Windows 2000/Me/98SE/98 users: Double-
click “My Documents” to open it.
• If you already have a “DCIM” folder in “My Documents”,
the next step will overwrite it. If you want to keep the
existing “DCIM” folder, you need to change its name or
move it to a different location before performing the next
step.
6. On the “My Documents” “Edit” menu, select
“Paste”.
This will paste the “DCIM” folder (and all the image files it
contains) into your “My Documents” folder. You now have a
copy of the files that are in camera memory on your
computer.
IMPORTANT!
• Never use your computer to modify, delete, move, or
rename any image files that are in the camera’s built-in
memory or memory card. Doing so can cause problems
with the camera’s image management data, which will
make it impossible to play back images on the camera and
can drastically alter remaining memory capacity. Whenever
you want to modify, delete, move, or rename an image, do
so only on images that are stored on your computer.
• Never unplug the USB cable, or operate the camera or
cradle while viewing or storing images. Doing so can cause
data to become corrupted.
232
USING THE CAMERA WITH A COMPUTER
■ Removing the Camera from the USB Cradle
Windows Vista/XP/98SE/98 Users
Press the USB cradle [USB] button. After making sure that the
cradle’s USB lamp is not lit, remove the camera from the cradle.
Windows 2000/Me Users
Click card services in the task tray on your computer screen, and
disable the drive number assigned to the camera. Next, press
the USB cradle [USB] button. After making sure that the cradle’s
USB lamp is not lit, remove the camera from the cradle.
Transfer of Images from the Camera and
Management of Images on the Computer
To manage images on your computer, you need to install the
Photo Loader with HOT ALBUM application from the CD-ROM
that comes with the camera.
Photo Loader with HOT ALBUM lets you import images from the
camera to your computer automatically, to arrange images by
recording date, and to display images in a calendar format.
■ Installing Photo Loader with HOT ALBUM
1. Start up your computer, and place the bundled
CD-ROM into its CD-ROM drive.
• Use the CD-ROM that has “Photo Loader with HOT
ALBUM” on its label.
• Normally, this should cause the menu screen to appear
automatically. If your computer does not display the menu
screen automatically, navigate to the CD-ROM on your
computer and then double-click the “AutoMenu.exe” file.
2. On the menu screen, click the “Language”
down arrow button and then select the
language you want.
233
USING THE CAMERA WITH A COMPUTER
3. Click “Photo Loader with HOT ALBUM 3.1” to
select it and then click “Read me”.
• “Read me” files contain important information about
installation, including installation conditions and computer
system requirements.
4. Click “Install” for Photo Loader with HOT
ALBUM.
5. Follow the instructions that appear on your
computer screen to install Photo Loader with
HOT ALBUM.
Checking Your Computer’s DirectX Version
In order to manage images using Photo Loader with HOT
ALBUM, your computer also needs to have Microsoft DirectX 9.0
or higher installed. You can check the installed version of
Microsoft DirectX using your PC’s DirectX Diagnostic Tool.
1. On your computer, click “Start”, “All
Programs”, “Accessories”, “System Tools”
and then “System Information”.
2. On the “Tools” menu, select “DirectX
Diagnostic Tool”.
3. On the “System” tab, check to make sure that
the “DirectX Version” is 9.0 or higher.
4. Click “Exit” to exit the DirectX Diagnostic
Tool.
• If your PC already has Microsoft DirectX 9.0 or higher
installed, you do not need to install Microsoft DirectX 9.0c
from the bundled CD-ROM.
• If your computer does not have Microsoft DirectX 9.0 or
higher installed, install Microsoft DirectX 9.0c from the
bundled CD-ROM.
234
USING THE CAMERA WITH A COMPUTER
Playing Movies
You can play back movies on a computer that
has QuickTime 7 or higher installed. To play
back a movie, first copy it to your computer
and then double-click the movie file.
1. Start up your computer, and place the bundled
CD-ROM into its CD-ROM drive.
• Use the CD-ROM that has “QuickTime 7” on its label.
• Normally, this should cause the menu screen to appear
automatically. If your computer does not display the menu
screen automatically, navigate to the CD-ROM on your
computer and then double-click the “AutoMenu.exe” file.
2. On the menu screen, click the tab for the
language you want.
3. Click “QuickTime 7” to select it and then click
“Read me”.
• “Read me” files contain important information about
installation, including installation conditions and computer
system requirements.
4. Click “Install” for QuickTime 7.
5. Follow the instructions that appear on your
computer screen to install QuickTime 7.
■ Minimum Computer System Requirements
for Movie Playback
The minimum system requirements described below are
necessary to play back movies recorded with this camera on a
Windows computer.
Operating System : Windows XP/2000
Memory : Pentium M, 1GHz or higher
Pentium 4, 2GHz or higher
Required Software : QuickTime 7
DirectX 9.0c
235
USING THE CAMERA WITH A COMPUTER
IMPORTANT!
• The above is the recommended environment. Configuring
this environment does not guarantee proper operation.
• Even if your computer meets the minimum requirements
described above, certain settings and other installed
software may interfere with proper playback of movies.
Uploading Movie Files to YouTube
To simplify uploading of movie files you recorded with the “For
YouTube” BEST SHOT scene, install YouTube Uploader for
CASIO from the CD-ROM that comes with the camera.
What is YouTube?
YouTube is a site managed by YouTube, LLC. At YouTube, you
can upload mov ies you recorded and view movies that have
been uploaded by others. You need to register as a YouTube
user before you can upload movies there.
■ Installing YouTube Uploader for CASIO
1. Start up your computer, and place the bundled
CD-ROM into its CD-ROM drive.
• Normally, this should cause the menu screen to appear
automatically. If your computer does not display the menu
screen automatically, navigate to the CD-ROM on your
computer and then double-click the “AutoMenu.exe” file.
2. On the menu screen, click the “Language”
down arrow button and then select the
language you want.
236
USING THE CAMERA WITH A COMPUTER
3. Click “YouTube Uploader for CASIO” to select
it and then click “Read me.”
• “Read me” files contain important information about
installation, including installation conditions and computer
system requirements.
4. Click “Install” for YouTube Uploader for
CASIO.
5. Follow the instructions that appear on your
computer screen to install YouTube Uploader
for CASIO.
■ Uploading a movie file to YouTube
IMPORTANT!
• Before you can use YouTube Uploader for CASIO, you
need to go to the YouTube website
(http://www.youtube.com/) and register as a user there.
• Do not upload any video that is copyrighted (including
neighboring copyrights) unless you yourself own the
copyright or you have obtained the permission of the
applicable copyright holder(s).
1. Record the movie you want to upload using
the “For YouTube” BEST SHOT scene.
2. If it isn’t already, connect your computer to the
Internet.
3. Connect the camera to your computer.
• See page 226 for information about connecting the
camera to your computer.
B
237
USING THE CAMERA WITH A COMPUTER
4. Press the USB cradle’s [USB] button.
• YouTube Uploader for CASIO will start up automatically.
• The first time you start up YouTube Uploader, a dialog
box will appear and ask you to enter your YouTube user
ID and your password, and to configure network
environment settings. Follow the instructions on the
dialog box and then click the [OK] button.
5. The left side of the display will have an area
for inputting a title, category, and other
information required for uploading to
YouTube. Enter the required information.
6. The right side of the display shows a list of
movie files in camera memory. Select the
check box next to the movie file you want to
upload.
7. After everything is the way you want, click the
[Upload] button to upload the file.
• After uploading is complete, click the [Exit] button to exit
the application.
IMPORTANT!
• The maximum file size for upload to the YouTube website
is 100MB.
238
USING THE CAMERA WITH A COMPUTER
Editing a Movie
In order to edit movies on your PC, you need to install Movie
Wizard 3.2 SE VCD from the bundled CD-ROM.
NOT
E
• The Movie Wizard 3.2 SE VCD application that comes on
the bundled CD-ROM can create Video-CDs, but it cannot
created DVDs. If you want to be able to create DVDs, you
need to upgrade to the commercial version of the software.
See the Movie Wizard 3.2 SE VCD “Read me” file on the
CD-ROM for information about and what you need to do to
upgrade to the commercial version.
■ Installing Movie Wizard 3.2 SE VCD
1. Start up your computer, and place the bundled
CD-ROM into its CD-ROM drive.
• Use the CD-ROM that has “Movie Wizard 3.2 SE VCD”
on its label.
• Normally, this should cause the menu screen to appear
automatically. If your computer does not display the menu
screen automatically, navigate to the CD-ROM on your
computer and then double-click the “AutoMenu.exe” file.
2. On the menu screen, click the “Language”
down arrow button and then select the
language you want.
3. Click “Movie Wizard 3.2 SE VCD” to select it
and then click “Read me”.
• “Read me” files contain important information about
installation, including installation conditions and computer
system requirements.
4. Click “Install” for Movie Wizard 3.2 SE VCD.
5. Follow the instructions that appear on your
computer screen to install Movie Wizard 3.2
SE VCD.
For more powerful editing capabilities, install the trial version
of VideoStudio 10 Plus for CASIO, which is a 30-day trial
version.
239
USING THE CAMERA WITH A COMPUTER
Transferring Images to the Camera
In order to return images from your computer memory back to
the camera, install Photo Transport on your computer from the
CD-ROM that comes with the camera.
■ Installing Photo Transport
1. Start up your computer, and place the bundled
CD-ROM into its CD-ROM drive.
• Use the CD-ROM that has “Photo Transport” on its label.
• Normally, this should cause the menu screen to appear
automatically. If your computer does not display the menu
screen automatically, navigate to the CD-ROM on your
computer and then double-click the “AutoMenu.exe” file.
2. On the menu screen, click the “Language”
down arrow button and then select the
language you want.
• Regardless of the language you select, the English
version of Photo Transport is installed.
3. Click “Photo Transport” to select it and then
click “Read me”.
• “Read me” files contain important information about
installation, including installation conditions and computer
system requirements.
4. Click “Install” for Photo Transport.
5. Follow the instructions that appear on your
computer screen to install Photo Transport.
■ Transferring image files to the camera
1. First, connect the camera to your computer.
• See page 226 for information about connecting the
camera to your computer.
2. On your computer, click “Start”, “All
Programs”, “Casio” and then “Photo
Transport”.
This starts up Photo Transport.
240
USING THE CAMERA WITH A COMPUTER
3. Drop the image data you want to transfer to
the camera onto the Photo Transport Transfer
button.
Move your mouse pointer to the image file you want to
transfer, and then hold down your mouse button. Keeping
your mouse button depressed, drag the mouse pointer and
the image file along with it to the Photo Transport Transfer
button, and then release the mouse button.
4. Follow the instructions that appear on the
display to transfer the image file to the
camera.
• The image transfer method and detailed image settings
used depend on the Photo Transport settings. For details,
see Photo Transport help (page 242).
IMPORTANT!
• Certain types of images may not be able to be transferred.
• You cannot transfer movies to the camera.
• Only image files of the following formats can be transferred
to the camera: JPG, JPEG, JPE, and BMP. The transfer
operation converts BMP files to JPEG format.
Transfer button
Help button
Settings button Exit button
241
USING THE CAMERA WITH A COMPUTER
■ Transferring screen captures to the camera
1. First, connect the camera to your computer.
• See page 226 for information about connecting the
camera to your computer.
2. On your computer, click “Start”, “All
Programs”, “Casio” and then “Photo
Transport”.
This starts up Photo Transport.
3. Display the screen whose screen capture you
want to transfer.
4. Click the Photo Transport Capture button.
5. Use your mouse to select the area of the
screen you want to capture.
Move your mouse pointer to the upper left corner of the area
you want to capture and then hold down your mouse button.
Keeping your mouse button depressed, drag the pointer
down to the right corner of the area and then release the
mouse button.
Capture button
Capture area
242
USING THE CAMERA WITH A COMPUTER
6. Follow the instructions that appear on the
display to transfer a capture of the selected
area to the camera.
• The image transfer method and detailed image settings
used depend on the Photo Transport settings. For details,
see Photo Transport help (page 242).
IMPORTANT!
• The transfer operation converts screen captures to JPEG
format.
■ Photo Transport Setup and Help
Clicking the Settings button will display a dialog box that you can
use to configure image transfer settings, to specify the transfer
method, etc. For detailed information ab out the setup,
operational procedures, and troubleshooting, click the Help
button.
Viewing User Documentation (PDF Files)
1.
Start up your computer, and place the bundled
CD-ROM into its CD-ROM drive.
• Use the CD-ROM that has “User’s Guide Included” on its
label.
• Normally, this should cause the menu screen to appear
automatically. If your computer does not display the menu
screen automatically, navigate to the CD-ROM on your
computer and then double-click the “AutoMenu.exe” file.
2. On the menu screen, click the “Language”
down arrow button and then select the
language you want.
3. Click “Manual” to select it and then click the
name of the application whose manual you
want to read.
243
USING THE CAMERA WITH A COMPUTER
IMPORTANT!
• You must have Adobe Reader or Adobe Acrobat Reader
installed on your computer in order to view the contents of
a PDF file. If you do not already have Adobe Reader or
Adobe Acrobat Reader installed, install Adobe Reader from
the bundled CD-ROM that has “Adobe Reader” on its label.
User Registration
You can perform user registration over the Internet. To do so, of
course, you need to be able to connect to the Internet with your
computer.
1. Click the “Register” button.
• This starts up your Web browser and accesses the user
registration website. Follow the instructions that appear
on your computer screen to register.
Exiting the CD-ROM Menu
On the CD-ROM menu, click “Exit”.
Install the required software in accordance with what version of
the Macintosh OS you are running and what you want to do.
Using the Camera with a Macintosh
Objective
OS
Version
Install this software:
See
page:
• Viewing images
on your
Macintosh
• Storing images
on your
Macintosh
OS 9/
OS X
• USB driver not
required.
245
Transfer of images
from the camera
and management of
images on your
Macintosh
OS 9
• Use commercially
available software.
250
OS X
• Use iPhoto, which
comes bundled with
your operating
system.
–
Play movies
OS 9
• Movie file playback
not supported.
251
OS X
• Movie file playback
supported under OS X
v10.3.9 or higher
when QuickTime 7 or
higher is installed.
244
USING THE CAMERA WITH A COMPUTER
■ System Requirements
System requirements are different for each of the applications.
Be sure to check the requirements for the particular application
you are trying to use. Note that the values provided here are
minimum requirements for running each application. Actual
requirements are greater, depending on the number of images
and the sizes of the images being handled.
CASIO DATA TRANSPORT 1.0
IMPORTANT!
• For details about the minimum system requirements for
each software application, see the “readme” files on the
CD-ROM that comes bundled with the camera.
Transfer documents
to the camera
OS X
CASIO DATA
TRANSPORT 1.0
259
View the User’s
Guide
OS 9/
OS X
• Use Adobe Reader or
Adobe Acrobat
Reader, which comes
bundled with your
operating system.
251
Objective
OS
Version
Install this software:
See
page:
OS : OS X 10.2.8 or greater
Other: Sufficient memory to run the operating system
245
USING THE CAMERA WITH A COMPUTER
Viewing and Storing Images on a
Macintosh
You can view and store images (snapshot and movie files) on
your Macintosh by connecting to the camera.
IMPORTANT!
• Connection is not supported to a Macintosh running Mac
OS 8.6 or lower, or Mac OS X 10.0. Connection is
supported to a Macintosh running Mac OS 9 or OS X (10.1,
10.2, 10.3, 10.4) only. Use the standard USB driver that
comes with the operating system for connection.
■ Connecting the Camera to Your Computer
the First Time
1. Connect the bundled AC adaptor to the [DC IN
5.3V] connector of the USB cradle and then
plug it in to a household power outlet.
• If you do not plan to use the AC adaptor, make sure that
the camera’s battery is fully charged.
246
USING THE CAMERA WITH A COMPUTER
2. Connect the USB cable that comes bundled
with the camera to the USB cradle and the
USB port of your Macintosh.
• Orient the USB plug so it correctly matches the shape of
the USB port when you connect them.
• Plug the USB cable into the ports securely, as far as it will
go. Proper operation is not possible if connections are not
correct.
3. Press the camera’s [ON/OFF] button to turn it
on and then press [MENU].
• Do not place the camera on the USB cradle yet.
4. On the “Set Up” tab, select “USB” and then
press [X].
5. Use [S] and [T] to select “Mass Storage” and
then press [SET].
6. Press the camera’s [ON/OFF] button to turn it
off and then place the camera on the USB
cradle.
• Do not place the camera onto the USB cradle while it is
turned on.
• If you plan to transfer images from the camera’s built-in
memory to your Macintosh, make sure there is no
memory card loaded in the camera.
[ ] (USB) Connector
Connector A
Connector
Mini-B
USB Cable (Bundled)
USB Port
247
USING THE CAMERA WITH A COMPUTER
7. Press the USB cradle’s
[USB] button.
Camera-Macintosh Connection
Pressing the cradle’s [USB] button puts it into the USB mode,
which is indicated by the USB lamp lighting green. In this mode,
your Macintosh recognizes the memory card loaded in the
camera (or the camera’s built-in memory if it does not have a
memory card loaded) as a drive.
The appearance of the drive icon depends on the Mac OS
version you are using.
From now on, you will not have to perform steps 3 through 5 in
the above procedure when you connect the camera to your
Macintosh (unless you change the camera’s USB settings for
some reason).
IMPORTANT!
• Never disconnect the USB cable or remove the camera
from the USB cradle without exiting the USB mode first.
Doing so can corrupt image data. See “Removing the
Camera from the USB Cradle” on page 250 for the correct
steps you need to perform to remove the camera from the
cradle safely.
USB Lamp
[USB]
248
USING THE CAMERA WITH A COMPUTER
■ Connecting the Camera to Your Macintosh
after the First Time
Since you need to configure menu settings only the first time you
connect the camera to your Macintosh, later connections are
much simpler.
1. Press the camera’s [ON/OFF] button to turn it
off and then place the camera on the USB
cradle.
2. Press the USB cradle’s
[USB] button.
• Pressing the cradle’s [USB]
button puts it into the USB
mode, which is indicated by
the USB lamp lighting
green.
■ Viewing Camera Images on Your Macintosh
After connecting the camera to your Macintosh, you can view
camera images on your Macintosh screen.
1. Double-click the camera’s drive icon.
2. Double-click the “DCIM” folder.
3. Double-click the folder that contains the image
you want to view.
4. Double-click the file that contains the image
you want to view.
This displays the image.
IMPORTANT!
• Do not leave the same image displayed on your Macintosh
screen for a long time. Doing so can cause image “burn in”.
NOT
E
• An image that was rotated on the camera will be displayed
on your Macintosh screen in its original (unrotated)
orientation.
[USB]
249
USING THE CAMERA WITH A COMPUTER
■ Saving an Image on Your Macintosh
In order to work on an image to put it into an album, you must
first save it to your Macintosh. To save a camera image to your
Macintosh, you must first establish a connection between them
via the camera’s USB cradle.
1. Double-click the camera’s drive icon.
2. Drop the “DCIM” folder into the folder where
you want to store it.
This copies the “DCIM” folder to the folder on your
Macintosh.
IMPORTANT!
• Never use your computer to modify, delete, move, or
rename any image files that are in the camera’s built-in
memory or memory card. Doing so can cause problems
with the camera’s image management data, which will
make it impossible to play back images on the camera and
can drastically alter remaining memory capacity. Whenever
you want to modify, delete, move, or rename an image, do
so only on images that have been copied to your
Macintosh.
• Never unplug the USB cable, or operate the camera or
cradle while viewing or storing images. Doing so can cause
data to become corrupted.
250
USING THE CAMERA WITH A COMPUTER
■ Removing the Camera from the USB Cradle
1. On your Macintosh screen, drag the camera
drive to Trash.
2. Press the USB cradle [USB] button. After
making sure that the cradle’s USB lamp is not
lit, remove the camera from the cradle.
Transfer of Images from the Camera and
Management of Images on Your
Macintosh
If you are running Mac OS X, you can manage snapshots using
iPhoto, which comes bundled with your operating system.
If you are running Mac OS 9, use commercially available
software.
251
USING THE CAMERA WITH A COMPUTER
Playing Movies
You can use QuickTime, which comes
bundled with your operating system, to play
back movies. To play back a movie, first copy
the movie to your Macintosh and then double-
click the movie file.
■ Minimum Computer System Requirements
for Movie Playback
The minimum system requirements described below are
necessary to use your Macintosh to play back movies recorded
with this camera.
IMPORTANT!
• The above is the recommended environment. Configuring
this environment does not guarantee proper operation.
• Even if your computer meets the minimum requirements
described above, certain settings and other installed
software may interfere with proper playback of movies.
• Movie file playback is not supported under OS 9.
Viewing User Documentation (PDF Files)
You must have Adobe Reader or Adobe Acrobat Reader
installed on your computer in order to view the contents of a
PDF file. If you don’t, go to the Adobe Systems Incorporated
website and install Acrobat Reader.
1. On the CD-ROM, open the “Manual” folder.
• Use the CD-ROM that has “User’s Guide included” on its
label.
2. Open the “Digital Camera” folder and then
open the folder for the language whose user’s
guide you want to view.
3. Open the file named “camera_xx.pdf”.
• “xx” is the language code (Example: camera_e.pdf is for
English.)
Registering as a User
Internet registration only is supported. Visit the following CASIO
website to register:
http://world.casio.com/qv/register/
OS : OS X 10.3.9 or greater
Required Software : QuickTime 7 or greater
252
USING THE CAMERA WITH A COMPUTER
The method you should use to read files from a memory card
depends on the type of computer you have. Some typical
examples are shown below. After you connect, use the same
procedures as those that you use when the camera is connected
to your computer via the USB cradle.
■ If your computer has a memory card slot
After checking to make sure that your computer’s card slot is
compatible with the memory card you are using to store images,
insert the memory card into the slot.
■ If your computer has a PC card slot
Use a commercially available PC card adapter that is
appropriate for the memory card. For full details, see the user
documentation that comes with the PC card adapter and your
computer.
■ Other types of computers
Use either of the method described below.
– Use a commercially
available memory card
reader/writer that is
appropriate for the
memory card you are
using. See the user
documentation that comes with the memory card reader/
writer for details about how to use it.
– Use a commercially available PC card reader/writer and a
commercially available PC card adapter that is appropriate
to the type of memory card you are using. See the user
documentation that comes with the PC card reader/writer
and PC card adapter for details about how to use them.
Reading Files Directly from a Memory
Card
253
USING THE CAMERA WITH A COMPUTER
The camera stores images you shoot and other data in
accordance with the Design Rule for Camera File System
(DCF).
■ About DCF
DCF is a system that defines both image file formats and the
structure of the folders that store data. This makes it possible for
a digital camera, printer, or other DCF-compliant device to
display or print image data from another DCF device.
■ Memory Folder Structure
(DCIM Folder)
(Total Index File)
(Recording Folder)
(Image File)
(Movie File)
(Audio File)
(Audio Snapshot Image File)
(Audio Snapshot Audio File)
(Document Folder)
(Document File)
(Document File)
(Document Management File)
(Document Management File)
(MPV Management File)
(Recording Folder)
(Document Folder)
(DPOF File Folder)
(DPOF File)
(Snapshot BEST SHOT Folder)
(Snapshot User Setup File)
(Snapshot User Setup File)
(Movie BEST SHOT Folder)
(Movie User Setup File)
(Movie User Setup File)
(FAVORITE Folder)
(Recording File)
(Recording File)
(Family Face Recognition Folder)
Memory Card Data
DCIM
INDEX.PVM
100CASIO*
1
CIMG0001.JPG
CIMG0002.MOV
CIMG0003.WAV
CIMG0004.JPG
CIMG0004.WAV
101_VIEW
VIEW001.JPE
VIEW002.JPE
_THUMB.FNX
_THUMB.JPE
VIEW.PVM
102CASIO*
1
103_VIEW
MISC
AUTPRINT.MRK
SCENE*
2
US880001.JPE
US880002.JPE
MSCENE*
2
US880001.JPE
US880002.JPE
FAVORITE*
2
CIMG0001.JPG
CIMG0002.JPG
FAMILY*
2
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
254
USING THE CAMERA WITH A COMPUTER
(Background Music Folder)
(Background Music File)
(Background Music File)
(Startup Screen File)
*1 Other folders are created when the following BEST SHOT
scenes are used for recording: “For eBay” or “Auction”
(scene name depends on camera model), or “For YouTube”.
The following shows the name of the folder created for each
scene.
• eBay scene: 100_EBAY
• Auction scene: 100_AUCT
• YouTube scene: 100YOUTB
*2 Indicates files that can be created in built-in memory only.
Folder and File Contents
• DCIM Folder
Folder that contains all of the camera files
• Total Index File
Management file of the document folder
• Recording Folder
Folder that contains files recorded with the camera
• Image File
File of an image shot with the camera. Extension is “JPG”.
• Movie File
File of a movie shot with the camera. Extension is “MOV”.
• Audio File
Audio recording file. Extension is “WAV”.
• Audio Snapshot Image File
Image file of an audio snapshot. Extension is “JPG”.
• Audio Snapshot Audio File
Audio recording file of an audio snapshot. Extension is
“WAV”.
• Document Folder
Folder that contains document files transferred to the camera
• Document File
Document files transferred to the camera
• Document Management File
Management file for documents transferred to the camera
• MPV Management File
Management file for documents transferred to the camera
SSBGM
SSBGM001.WAV
SSBGM002.WAV
STARTING.JPG*
2
•
•
•
•
•
•
255
USING THE CAMERA WITH A COMPUTER
• DPOF File Folder
Folder that contains DPOF files, etc.
• Snapshot BEST SHOT Folder
Folder that contains snapshot BEST SHOT user setup files
• Snapshot User Setup File
File of a snapshot BEST SHOT user setup
• Movie BEST SHOT Folder
Folder that contains Movie BEST SHOT user setup files
• Movie User Setup File
Files that contain Movie BEST SHOT user setups
• FAVORITE Folder
Folder that contains Favorites image files. Size of images is
320 × 240 pixels.
• Family Face Recognition Folder
Folder that contains face members recorded for family
members. Any manipulation of the data in the “FAMILY” folder
can cause the camera to stop operating properly. Never
delete or edit any data in the “FAMILY” folder.
• Backgrou nd Music Folder
Folder that contains background music files transferred to the
camera
• Startup Screen File
File for storing the startup screen image. This file is created
when you specify an image for use as the startup screen
image.
■ Supported Image Files
• Image files shot with this camera
• DCF-compliant image files
Even if an image is DCF-compliant, this camera still may not be
able to display it. When displaying an image recorded on
another camera, it may take a long time for the image to appear
on this camera’s monitor screen.
256
USING THE CAMERA WITH A COMPUTER
■ Built-in Memory and Memory Card Data
Handling Precautions
• When saving camera data to a computer hard disk, MO disk,
or other medium, be sure to transfer the entire DCIM folder
and its contents. Changing the name of the DCIM to a date or
something similar after you copy it to your computer is a good
way to keep track of multiple DCIM folders. When moving the
folder back to the camera, however, be sure to change its
name back to DCIM. This camera does not recognize any
folder name besides DCIM.
All of the other folders inside the DCIM folder must also have
their original names if you transfer them back to the camera.
• Folders and files must be stored in accordance with the
“Memory Folder Structure” shown on page 253 in order for the
camera to be able to recognize them correctly.
257
TRANSFERRING DOCUMENTS TO YOUR CAMERA
(DATA STORAGE)
TRANSFERRING DOCUMENTS TO YOUR CAMERA (DATA STORAGE)
You can use CASIO DATA TRANSPORT to transfer documents,
web page images, and other documents you can view on you
computer screen to the camera. Then you can view the
documents on the camera’s monitor screen.
NOT
E
• In this section, anything you transfer to the camera is called
a “document”. Some documents can contain multiple
“pages”.
IMPORTANT!
• Just about any document you can print from your computer
can be transferred to the camera. Note, however, the ability
to properly transfer and display any particular type of
document is not guaranteed.
• Certain types of documents may look different on the
camera’s monitor screen than it looks on your computer
screen.
Transferring documents from a
computer running Windows
To transfer documents on your computer to the camera so you
can view it on the monitor screen, you need to install CASIO
DATA TRANSPORT from the CD-ROM that comes with the
camera.
■ Installing CASIO DATA TRANSPORT
1. Start up your computer, and place the bundled
CD-ROM into its CD-ROM drive.
• Use the CD-ROM that has “DATA TRANSPORT” on its
label.
• Normally, this should cause the menu screen to appear
automatically. If your computer does not display the menu
screen automatically, navigate to the CD-ROM on your
computer and then double-click the “AutoMenu.exe” file.
Transferring Documents to the
Camera
258
TRANSFERRING DOCUMENTS TO YOUR CAMERA
(DATA STORAGE)
2. On the menu screen, click the tab for the
language you want.
• Regardless of the language you select, the English
version of CASIO DATA TRANSPORT is installed.
3. Click the DATA TRANSPORT “Read me” file
and read its contents.
• “Read me” files contain important information about
installation, including installation conditions and computer
system requirements.
4. Click “Install” for DATA TRANSPORT.
5. Follow the instructions that appear on your
computer screen to install CASIO DATA
TRANSPORT.
■ Transferring documents
1. First, connect the camera to your computer.
• Before connecting the camera to your computer, make
sure that a memory card is loaded in the camera.
• See page 226 for information about connecting the
camera to your computer.
2. On your computer, open the document data
file that you want to transfer to the camera.
3. On the application menu of the currently open
document, select “Print”. On the print dialog
box that appears, select “CASIO DATA
TRANSPORT” for the “Printer Name” setting.
259
TRANSFERRING DOCUMENTS TO YOUR CAMERA
(DATA STORAGE)
4. Click the [OK] button.
This will display a dialog box for customizing document file
properties (date, file name, icon).
5. Check the current data settings (date, file
name, icon) and then click the [OK] button.
This will convert the document data to a JPEG image and
transfer the image to the camera.
• You can change the date, filename, and icon settings if
you want.
• To cancel the transfer, click the [Cancel] button.
• If you want a document image be displayed on the
camera’s monitor screen using an orientation that is
different from that used on the computer screen, click the
[Properties] button on the print dialog box, change the
“Orientation” setting, and then click the [OK] button.
Transferring documents from a
Macintosh
To transfer documents on your computer to the camera so you
can view it on the monitor screen, you need to install CASIO
DATA TRANSPORT from the CD-ROM that comes with the
camera.
■ Installing CASIO DATA TRANSPORT
Before starting installation, be sure to read any “readme” file that
accompanies CASIO DATA TRANSPORT. “readme” files
contain important information about installation, including
installation conditions and computer system requirements.
1. Place the CD-ROM that comes bundled with
the camera into your Macintosh CD-ROM
drive.
• Use the CD-ROM that has “DATA TRANSPORT” on its
label.
2. Open the folder named “DATA TRANSPORT”.
260
TRANSFERRING DOCUMENTS TO YOUR CAMERA
(DATA STORAGE)
3. Double-click “TRANSPORT_Installer”.
4. Follow the instructions in the “readme” file to
install CASIO DATA TRANSPORT.
■ Transferring documents
1. First, connect the camera to your Macintosh.
• Before connecting the camera to your Macintosh, make
sure that a memory card is loaded in the camera.
• See page 245 for information about connecting the
camera to your Macintosh.
2. On your Macintosh, open the document that
you want to transfer to the camera.
3. On the menu bar, click “File” and then “Print”.
4. Click the PDF button at the bottom of the
dialog box and then select “CASIO DATA
TRANSPORT” from the menu that appears.
This will display a dialog box for customizing document file
properties (date, file name, icon).
5. Check the current data settings (date, file
name, icon) and then click the [OK] button.
This will convert the document to a JPEG image and
transfer the image to the camera.
• You can change the date, filename, and icon settings if
you want.
• To cancel the transfer, click the [Cancel] button.
261
TRANSFERRING DOCUMENTS TO YOUR CAMERA
(DATA STORAGE)
1. On the camera, select either the REC mode or
the PLAY mode.
2. Press [DATA].
This enters the data mode
and displays a menu of
documents currently in
camera memory.
• The currently selected
document is the one with
the red boundary around it.
• Pressing [DATA] will return to the screen that was
displayed before you entered the data mode.
• Pressing [ ] enters the REC mode, while pressing
[ ] enters the PLAY mode.
3. Use [S], [T], [W], and [X] to move the
boundary to the document you want to select.
• The document menu screen can show up to 12
documents. If there are more than 12 documents in
camera memory, use [S] or [T] to switch between the
menu screens of 12 images each.
4. Press [SET] to open
the currently selected
document and display
its pages (contents).
5. Use [X] (forward) and [W] (back) to scroll
through the pages of the document.
• Pressing [S] jumps to page 1 of the document.
Viewing a Transferred Document on
the Camera
262
TRANSFERRING DOCUMENTS TO YOUR CAMERA
(DATA STORAGE)
NOT
E
• Pressing [SET] or the zoom button toggles between the
document menu and the document page screens.
• Pressing [DISP] while the document page screen is on the
display will display a menu screen for configuring screen
settings. You can use the menu to turn display information
on or off.
IMPORTANT!
• Note that selecting “All Images” for printing will also print all
the pages of all the documents that have been transferred
to the camera. Regardless of whether you are printing at
home or if you are using an outside printing service, make
sure you know what is stored in a memory card (especially
documents) before selecting “All Images” (page 217).
Rotating a Document Page
You can use the following procedure to rotate a document page
on the display.
1. Press [DATA].
2. Press [MENU].
3. On the “DATA” tab, select “Rotation”, and
then press [X].
4. Use [W] and [X] to display the document page
you want to rotate.
5. Use [S] and [T] to select “Rotate”, and then
press [SET].
Each press of [SET] will rotate the displayed image 90
degrees left.
6. When the displayed image is at the orientation
you want, press [MENU].
263
TRANSFERRING DOCUMENTS TO YOUR CAMERA
(DATA STORAGE)
Specifying the Initial Data Mode Screen
You can use the following procedure to configure the camera
so either the document data list or the last document page you
were viewing appears first whenever you press [DATA] to enter
the data mode.
1. Press [MENU].
2. On the “Set Up” tab, select “DATA View”, and
then press [X].
3. Use [S] and [T] to select the setting you
want, and then press [SET].
NOT
E
• Even if “Page View” is selected for the above setting, the
document data list view will appear initially if a data list
was on the display the last time you exited the data mode.
To have this screen appear first: Select this setting:
Document menu List View
This displays the document page
you last viewed.
Page View
264
TRANSFERRING DOCUMENTS TO YOUR CAMERA
(DATA STORAGE)
Protecting Document Data
You can protect a specific document or all documents against
deletion (memory protect).
■ To protect a specific document
1. Press [DATA].
2. Press [MENU].
3. On the “DATA” tab, select “Protect”, and then
press [X].
4. Use [W] and [X] to display the document you
want to protect.
5. Use [S] and [T] to select “On” and then press
[SET].
6. To protect other documents, repeat steps 4
and 5.
• To exit the memory protect operation, press [MENU].
To unprotect a specific document
Perform the procedure under “To protect a specific document”,
but in step 5 select “Off” instead of “On”.
Managing Document Data on the
Camera
265
TRANSFERRING DOCUMENTS TO YOUR CAMERA
(DATA STORAGE)
■ To protect all documents
1. Press [DATA].
2. Press [MENU].
3. On the “DATA” tab, select “Protect”, and then
press [X].
4. Use [S] and [T] to select “All Files : On” and
then press [SET].
5. Press [MENU].
To unprotect all documents
Perform the procedure under “To protect all documents”, but in
step 4 select “All Files : Off” instead of “All Files : On”.
Deleting Document Data
■ Deleting a Document Page
After displaying a document page, you can delete a single
document page or all the pages in a document at the same time.
To delete a single document page
1. Display a page in the document that contains
the page you want to delete and then press
[T] ( ).
2. Use [W] and [X] to select the document page
you want to delete.
3. Use [S] and [T] to select “1 page” and then
press [SET].
4. To delete other document pages, repeat steps
2 and 3.
• To exit the delete operation, press [MENU].
IMPORTANT!
• Single document pages cannot be deleted when a
document has more than 1600 pages. Attempting to delete
a single page for such a document will cause the message
“This function is not supported for this file.” to appear.
B
266
TRANSFERRING DOCUMENTS TO YOUR CAMERA
(DATA STORAGE)
To delete all the pages in a document page
1. Display a page in the document whose pages
you want to delete and then press [T] ( ).
2. Use [S] and [T] to select “All pages” and then
press [SET].
3. Use [S] and [T] to select “Yes”.
• To cancel the delete operation, select “No” instead of
“Yes”.
4. Press [SET].
■ Deleting Documents
You can use the document menu to select a specific document
and delete it, or you can delete all documents currently in
camera memory.
To delete a single document
1. On the document menu, use [S], [T], [W], and
[X] to move the selection boundary to the
document you want to delete.
2. Press [MENU].
3. Use [S] and [T] to select “1 doc” and then
press [SET].
4. Use [S] and [T] to select “Yes”.
• To cancel the delete operation, select “No” instead of
“Yes”.
5. Press [SET].
267
TRANSFERRING DOCUMENTS TO YOUR CAMERA
(DATA STORAGE)
To delete all documents
1. While the document menu is displayed, press
[MENU].
2. Use [S] and [T] to select “All docs” and then
press [SET].
3. Use [S] and [T] to select “Yes”.
• To cancel the delete operation, select “No” instead of
“Yes”.
4. Press [SET].
This will delete all documents in camera memory and
display the message “No documents in memory. Exiting
data mode.”.
NOT
E
• Formatting camera memory (pages 50, 209) will also
delete all documents currently in camera memory.
268
APPENDIX
APPENDIX
The numbers in parentheses indicate the pages where each part
is explained.
■ Camera
Front
Back
General Guide
1
Shutter (page 64)
2
[ON/OFF] (Power)
(page 43)
3
Flash (page 75)
4
AF Assist/Self-timer Lamp
(pages 62, 69, 79, 277)
5
Lens
6
Microphone (pages 86, 96)
5
3
4
21
6
7
Operation Lamp
(pages 43, 64, 277)
8
[DATA] Button (page 261)
9
[DISP] Button (page 54)
bk
[ ] (PLAY) Button
(pages 43, 208)
bl
[ ] (REC) Button
(pages 43, 208)
bm
Zoom Button
(pages 71, 165, 166)
bn
[] (Movie) Button
(page 95)
bo
Strap Hole (page 2)
bp
Control Button
([S], [T], [W], [X])
bq
[SET] Button
br
[BS] Button (page 104)
bs
[MENU] Button (page 52)
bt
Monitor Screen (page 53)
bp
897
brbsbt bq
bkbl
bm bobn
SET
269
APPENDIX
Bottom
■ USB Cradle
Front
Back
ck
Battery/Memory Card Slots (pages 36, 48)
cl
Cradle Contact (page 38)
cm
Tripod Hole
Use this hole when attaching to a tripod.
cn
Speaker (page 152)
ckclcmcn
1
Camera Contact (page 38)
2
USB Lamp
(pages 227, 247, 279)
3
[USB] Button
(pages 215, 227, 247)
4
[PHOTO] Button
(pages 161, 162)
5
[CHARGE] Lamp
(pages 38,279)
6
[DC IN 5.3V] (External Power)
Terminal (page 37)
7
[ ] (USB) Connector
(pages 213, 226, 246)
8
[AV OUT] (AV output port)
(page 162)
1
5
2
3
4
6
8
7
270
APPENDIX
The monitor screen uses various indicators, icons, and values to keep you informed of the camera’s status.
• The sample screens in this section are intended to show you the locations of all the indicators and figures that can appear on the
monitor screen in various modes. They do not represent screens that actually appear on the camera.
Monitor Screen Contents
■ Snapshot Recording Mode
Panel : On
Panel : Off
bp
9
bk
bl
bn
bo
bm
bt
ck
cl
brbsbn bq
87643521
br
bs
bn
8
9
1bo2
bk 345 6
bq
bt
bp
cl
ck
bm
7
1
Focus Mode (page 121)
2
Continuous Shutter Mode
(page 81)
3
Recording Mode
4
Digital zoom indicator (page 73)
5
Metering Mode (page 136)
6
Remaining Snapshot Memory
Capacity (page 63)
7
Snapshot Image Size (page 66)
8
Snapshot Image Quality (page 68)
9
Flash Mode (page 75)
bk
Self-timer Mode (page 79)
bl
Face Recognition Setting
(page 87)
bm
Anti Shake Indicator (page 110)
bn
ISO Sensitivity (page 135)
bo
White Balance Setting (page 132)
bp
Exposure Compensation
(page 131)
bq
Date/Time (page 202)
br
Shutter Speed (page 65)
bs
Aperture Value (page 65)
bt
Battery Level Indicator (page 40)
ck
Histogram (page 142)
cl
Focus Frame (pages 63, 126)
IMPORTANT!
• The aperture value, shutter speed, and ISO sensitivity will all turn orange
if any one of them is not correct when the shutter button is half-pressed.
271
APPENDIX
■ Movie Recording Mode
Panel : On
Panel : Off
21 43
8
9
6
5
7
16 2
8 7
9
5
3
4
1
Focus Mode (page 121)
2
Recording Mode
3
Remaining Movie Memory Capacity (page 95)
4
Movie Recording Time (page 95)
5
Anti Shake Indicator (page 110)
6
White Balance Setting (page 132)
7
Exposure Compensation (page 131)
8
Battery Level Indicator (page 40)
9
Histogram (page 142)
B
272
APPENDIX
■ Snapshot Playback Mode
1
File Type (page 151)
2
Protect Indicator (page 190)
3
Folder Name/File Name
(page 189)
4
Snapshot Image Quality
(page 68)
5
Snapshot Image Size
(page 66)
6
ISO Sensitivity (page 135)
7
Aperture Value (page 65)
8
Shutter Speed (page 65)
9
Date/Time (page 202)
bk
Metering Mode (page 136)
bl
White Balance Setting
(page 132)
bm
Flash Mode (page 75)
bn
Recording Mode
bo
Battery Level Indicator
(page 40)
bp
Histogram (page 142)
bq
Exposure Compensation
(page 131)
321
bp
bq
bo blbkbmbn
4
7
5
8
9
6
■ Movie Playback Mode
1
File Type (page 153)
2
Protect Indicator (page 190)
3
Folder Name/File Name
(page 189)
4
Movie Recording Time
(page 153)
5
Movie Image Quality
(page 94)
6
Date/Time (page 202)
7
Battery Level Indicator
(page 40)
1
4
5
7
23
6
273
APPENDIX
The tables in this section show the items that appears on the
menus that appear on the monitor screen when you press
[MENU]. The items included on the menus depend on whether
the camera is in the REC mode or PLAY mode.
• An asterisk (*) indicates reset default settings.
■ REC Mode
REC Tab Menu
Menu Reference
Focus (Auto Focus)* / Macro /
(Pan Focus) / (Infinity) /
(Manual Focus)
Continuous Normal Speed / High Speed / Flash Cont. /
Zoom Cont. / Off*
Self-timer 10 sec / 2 sec / X3 / Off*
Face
Recognition
Family First / Normal / Off* / Priority /
Record Family / Edit Family
Anti Shake Auto / Off*
AF Area Spot* / Mu lti / Tracking
AF Assist
Light
On* / Off
Digital Zoom On* / Off
L/R Key Metering / EV Shift / White Balance / ISO /
Self-timer / Off*
Quick Shutter On* / Off
Audio Snap On / Off*
Grid On / Off*
Review On* / Off
Icon Help On* / Off
Memory BEST SHOT: On / Off*
Flash: On* / Off
Focus: On / Off*
White Balance: On / Off*
ISO: On / Off*
AF Area: On* / Off
Metering: On / Off*
Self-timer: On / Off*
Flash Intensity: On / Off*
Digital Zoom: On* / Off
MF Position: On / Off*
Zoom Position: On / Off*
274
APPENDIX
Quality Tab Menu
Size 8M (3264 × 2448)* / 3:2 (3264 × 2176) /
16:9 (3264 × 1840) / 6M (2816 × 2112) /
4M (2304 × 1728) / 2M (1600 × 1200) /
VGA (640 × 480)
Quality
(Snapshots)
Fine / Normal* / Economy
Quality
(Movies)
UHQ / UHQ Wide / HQ* / HQ Wide / Normal /
LP
EV Shift –2.0 / –1.7 / –1.3 / –1.0 / –0.7 / –0.3 / 0.0* /
+0.3 / +0.7 / +1.0 / +1.3 / +1.7 / +2.0
White Balance Auto* / (Daylight) / (Overcast) /
(Shade) / (Day White Fluorescent) /
(Daylight Fluorescent) / (Tungsten) /
Manual
ISO Au to* / ISO 64 / ISO 100 / ISO 200 / ISO 400 /
ISO 800
Metering Multi* / Center weighted / Spot
Dynamic
Range
Expand +2 / Expand +1 / Off*
Portrait Refiner Noise Filter +2 / Noise Filter +1 / Off*
Color Filter Off* / B/W / Sepia/ Red/ Green/ Blue / Yellow /
Pink / Purple
Sharpness +2 / +1 / 0* / –1 / –2
N
D
Saturation +2 / +1 / 0* / –1 / –2
Contrast +2 / +1 / 0* / –1 / –2
Flash Intensity +2 / +1 / 0* / –1 / –2
Flash Assist Auto* / Off
275
APPENDIX
Set Up Tab Menu
Sounds Startup* / Half Shutter / Shutter / Operation /
Operation / Play
Startup On (Selectable image) / Off*
File No. Continue* / Reset
Language Changes the screen text language.
• The number and types of languages depend
on the geographic area where the camera
was marketed.
World Time Home* / World
Home Time setup (city, DST, etc.)
World Time setup (city, DST, etc.)
Timestamp Date / Date&Time / Off*
Adjust Time setting
Date Style YY/MM/DD / DD/MM/YY / MM/DD/YY
DATA View Page View / List View*
Sleep 30 sec / 1 min* / 2 min / Off
Auto Power Off 1 min* / 2 min / 5 min
REC / PLAY Power On* / Power On/Off / Disable
USB Mass Storage (USB DIRECT-PRINT)* /
PTP (PictBridge)
Video Out NTSC 4:3 / NTSC 16:9 / PAL 4:3 / PAL 16:9
Format Format / Cancel*
Reset Reset / Cancel*
B
276
APPENDIX
■ PLAY Mode
PLAY Tab Menu
“Set Up” Tab
• The contents of the “Set Up” tab are the same in the REC
mode and PLAY mode.
Slideshow Start* / Images / Time / Interval / Effect /
Cancel
Layout Print –
MOTION PRINT 9 frames* / 1 frame / Cancel
Anti Shake On / Off*
Movie Editing Cut (Before) /
Cut (Between) /
Cut (After) / Cancel*
Dynamic Range Expand +2 / Expand +1 / Cancel*
White Balance (Daylight) / (Overcast) /
(Shade) / (Day White
Fluorescent) / (Daylight Fluorescent) /
(Tungsten) / Cancel*
Brightness +2 / +1 / 0* / –1 / –2
Keystone –
Color Correction –
Calendar –
Favorites Show* / Save / Cancel
DPOF Printing Select images* / All images / Cancel
Protect On* / All Files : On / Cancel
Date/Time –
N
D
Rotation Rotate* / Cancel
Resize 6M (2816 × 2112)* / 4M (2304 × 1728) /
VGA (640 × 480) / Cancel
Trimming –
Dubbing –
Copy Built-in Card* / Card Built-in / Cancel
C
277
APPENDIX
The tables in this section show the items that appears on the
menus that appear on the monitor screen when you press
[DISP]. Most of these items are for configuring monitor screen
settings. The items included on the menus depend on whether
the camera is in the REC mode or PLAY mode.
• An asterisk (*) indicates reset default settings.
■ REC Mode
■ PLAY Mode
The camera has lamps: an Operation Lamp and an AF Assist/
Self-timer Lamp. These Lamps light and flash to indicate the
current operational status of the camera.
Display Menu Reference
Layout Panel: On* / Panel: Off
Info. Show* / +Histogram / Hide
Brightness Auto / +2 / +1 / 0 / –1
Type Dynamic* / Vivid / Real / Night /
Power Saving
Layout 4:3 / Wide*
Info. Same as REC mode settings.
Brightness Same as REC mode settings.
Type Same as REC mode settings.
Indicator Lamps
Operation Lamp
AF Assist/Self-timer Lamp
278
APPENDIX
■ REC Mode
IMPORTANT!
• Never remove the memory card from the camera while the
operation lamp is flashing green. Doing so will cause the
image you shot to be lost.
■ PLAY mode
Operation Lamp
Meaning
Color Status
Green
Lit
Operational (Power on, recording enabled). /
Auto Focus operation was successful. / LCD
is off or in sleep state.
Flashing
Storing movie or processing image. / Image is
being stored. / Cannot Auto Focus. / Card is
being formatted. / Powering down.
Red
Lit
Memory card is locked. / Cannot create
folder. / Memory is full. / Write error.
Flashing
Memory card problem. / Memory card is
unformatted. / BEST SHOT setup cannot be
registered. / Low battery alert.
Amber Flashing Flash is charging.
AF Assist/
Self-timer Lamp
Meaning
Color Status
Red Flashing Self-timer countdown.
Operation Lamp
Meaning
Color Status
Green
Lit Operational (Power on, recording enabled).
Flashing
One of the following operations is in progress:
Delete, DPOF, protect, copy, format, resize,
trimming, adding audio to snapshot, keystone
correction, color correction, MOTION PRINT,
Layout Print, movie editing, power down.
Red
Lit
Memory card is locked. / Cannot create
folder. / Memory is full. / Write error.
Flashing
Memory card problem. / Memory card is
unformatted. / Low battery alert.
279
APPENDIX
■ USB Cradle Indicator Lamps
The USB cradle has two indicator lamps: a [CHARGE] lamp and
a USB lamp. These lamps light and flash to indicate the current
operational status of the cradle and camera.
[CHARGE] lamp
USB Lamp
[CHARGE] Lamp USB Lamp
Meaning
Color Status Color Status
Red Lit Charging
Green Lit Charging complete
Green Flashing Charge standby
Red Flashing Charge error
Green Lit USB connection
Green Flashing Memory being accessed.
280
APPENDIX
Finding the Problem and Fixing It
Troubleshooting Guide
Problem Possible Causes and Action
Power Supply
Power does not turn on. 1) The battery may not be oriented correctly (page 36).
2) The battery may be dead. Charge the battery (page 36). If the battery goes dead soon after being
charged, it means the battery has reached the end of its life and needs to be replaced. Purchase a
separately available CASIO NP-20 rechargeable lithium ion battery.
Camera suddenly powers
down.
1) Auto Power Off may have activated (page 45). Turn power back on.
2) The battery may be dead. Charge the battery (page 36).
3) The camera’s protection function may have activated because camera temperature is too high. Turn off
the camera and wait until it cools down before trying to use it again.
Power does not turn off.
Nothing happens when a
button is pressed.
Remove the battery from the camera and then reinsert it.
Image Recording
Image is not recorded when
the shutter button is pressed.
1) If the camera is in the PLAY mode, press [ ] (REC) to enter the REC mode.
2) If the flash is charging, wait until the charge operation finishes.
3) If the message “Memory Full” appears, transfer images to your computer, delete images you no longer
need, or use a different memory card.
Auto Focus does not focus
properly.
1) If the lens is dirty, clean it off.
2) The subject may not be in the center of the focus frame when you compose the image.
3) The subject you are shooting may not be a type that is not compatible with Auto Focus (page 71). Use
manual focus (page 129).
4) You may be moving the camera when shooting. Try shooting with Anti Shake (page 110) or use a tripod.
5) You may be using Quick Shutter and pressing the shutter button all the way, resulting in poor focus.
Half-press the sh
utter button and allow enough time for Auto Focus to focus.
B
281
APPENDIX
The subject is out of focus in
the recorded image.
The image may not be focused properly. When composing the image, make sure the subject is located
inside the focus frame.
The flash does not fire. 1) If “ ” (Flash Off) is selected as the flash mode, change to another mode (page 75).
2) If the battery is dead, charge it (page 36).
3) If a BEST SHOT scene that uses the “ ” (Flash Off) flash mode is selected, change to a different
flash mode (page 75) or select a different BEST SHOT scene (page 104).
Camera powers down during
self-timer countdown.
The battery may be dead. Charge the battery (page 36).
The monitor screen image is
out of focus.
1) You may be using Manual Focus and have not focused the image. Focus the image (page 129).
2) You may be using the macro mode for scenery or portraits. Use Auto Focus for scenery and
portrait shots (page 122).
3) You may be trying to use Auto Focus or the Infinity mode when shooting a close-up shot. Use the
Macro mode for close
ups (page 123).
There is a vertical line on the
monitor screen.
Shooting a very brightly lit subject can cause a vertical band to appear in the monitor screen image. This is
a CCD phenomenon known as “vertical smear”, and does not indicate malfunction of the camera. Note that
vertical smear is not recorded with the image in the case of a snapshot, but it is recorded in the case of a
movie.
There is digital noise in
images.
1) Sensitivity may have been increased automatically for a dark subject, which increases the chance of
digital noise. Use a light or some other means to illuminate the subject.
2) You may be attempting to shoot in a dark location while “ ” (Flash Off) is selected as the flash mode,
which can increase digital noise and make images appear coarse. In this case, change to a different
flash mode (page 75) or use lights for illumination.
3) Flash assist or dynamic range may be enabled for snapshots, which can cause an increase in digital
noise. Use a light or some other means to illuminate the subject.
An image I shot was not
saved.
1) Camera power may have been turned off before the sa
ve operation was complete, which will result in
the image not being saved. When the battery indicator shows “ ”, charge the battery as soon as
possible (page 36).
2) You may have removed the memory card from the camera before the save operation was complete,
which will result in the image not being saved. Do not remove the memory card before the save
operation is complete.
Problem Possible Causes and Action
B
282
APPENDIX
Though available lighting is
bright, the faces of people in
the image are dark.
Not enough light is reaching the subjects. Change the flash mode setting to “ ” (Flash On) for daylight
synchro flash (page 75), or use adjust EV shift to the + side (page 131).
Subjects are too bright when
shooting images in a
seashore or ski area.
Sunlight reflected by water, sand, or snow, can cause underexposure of images. Change the flash mode
setting to “ ” (Flash On) for daylight synchro flash (page 75), or use adjust EV shift to the + side (page
131).
Digital zoom does not work.
The zoom bar indicates zoom
only up to a zoom factor of
3.0.
1) The digital zoom setting may be turned off. Turn on digital zoom (page 74).
2) Time stamping may be turned on, which will cause digital zoom to be disabled. Turn off time stamping
(page 141).
Recognition of a family
member’s face is not
recognized correctly, even
though the face has been
recorded.
Though face characteristics were recorded for your family member, the data may have been faulty, or the
angle to the face or its expression may be making recognition difficult. Re-record the face of the family
member who is not being recognized (page 88).
The image is out of focus
during movie recording.
1) Focusing is not possible because the subject is outside the focus range. Shoot within the allowable
range.
2) The lens may be dirty. Clean the lens (page 34).
Problem Possible Causes and Action
283
APPENDIX
Playback
The color of the playback
image is different from what
appears on the monitor
screen when shooting.
Sunlight or light from another source may be shining directly into the lens when you are shooting. Position
the camera so sunlight does not shine directly into the lens.
Images are not displayed. This camera cannot display non-DCF images recorded onto a memory card using another digital camera.
I can’t edit images (Layout
Print, resizing, trimming,
keystone correction, color
restoration, rotation, white
balance, date/time editing).
Note that you cannot edit the following types of imagess.
• Images created with MOTION PRINT
• Movies
• Images recorded with another camera
Problem Possible Causes and Action
284
APPENDIX
Other
The wrong date and time are
displayed.
The date and time setting is off. Set the correct date and time (page 202).
The messages on the display
are in the wrong language.
The wrong display language is selected. Change the display language setting (page 206).
I can’t transfer images over a
USB connection.
1) The USB cable may not be connected securely. Check all connections.
2) If your computer is running Windows 98SE or 98, the USB driver may not be installed. Install the USB
driver (page 225), which you can download from the official EXILIM Website at http://www.exilim.com/.
3) If your computer is running Windows 98SE or 98, the USB driver may be installed incorrectly. Reinstall
the USB driver correctly (page 225).
4) The wrong USB communication protocol may be selected. Select the correct USB communication
protocol in accordance with the type of device you are connecting (page 207).
5) If the camera is not turned on, turn it on.
Display language setting
screen appears when the
camera is turned on.
1) You did not configure initial settings after purchasing the camera or the battery may have been left with
a dead battery. Check the camera setup (pages 11, 206).
2) The may be a problem with the camera’s built-in memory management area. If this is the case, perform
the reset operation to initialize the camera’s setup (page 150). After that, configure each setting. If the
language selection screen does not re-appear when you turn the camera on, it means that the camera’s
built-in memory management area has been restored.
If the same message appears after you turn power back on, contact your retailer or a CASIO service
center.
Problem Possible Causes and Action
285
APPENDIX
Display Messages
ALERT The camera’s protection function may have
activated becau se camera temperature is too
high. Turn off the camera and wait until it cools
down before trying to use it again.
• Any of the following may occur after the
“ALERT” message appears.
1) Power turns off.
2) Movie recording is impossible or movie
length is limited.
3) Monitor screen brightness setting changes
to 0.
Battery is low. Battery power is low.
Cannot correct
image!
Keystone correction of the image cannot be
performed for some reason. The image will be
stored as-is, without correction (page 113).
Cannot find the
file.
The image you specified with the slideshow
“Images” setting cannot be found. Change the
“Images” setting (page 156) and try again.
Cannot register
any more files.
• You are attempting to save a BEST SHOT
scene when there are already 999 scenes
in the “SCENE” folder (page 108).
• You are attempting to copy a FAVORITE
file when the “FAVORITE” folder already
contains 9999 files (page 192).
Card ERROR There is something wrong with the memory
card. Turn off the camera, remove the memory
card, and then reload it into the camera. If this
message re-appears when you turn the
camera back on, format the memory card
(page 50).
• Formatting the memory card deletes all its
files. Before formatting, try transferring
recoverable files to a computer or some
other storage device.
Check
connections!
• You are attempting to connect the camera
to a printer while the camera’s USB settings
are not compatible with the USB system of
the printer (page 212).
• If your computer is running Windows 98SE
or 98, the USB driver may not be installed
(page 225).
Files could not
be saved
because battery
is low.
Battery power is low, so an image file could not
be saved.
Folder cannot be
created.
You are trying to record a file while there are
already 9,999 files stored in the 999th folder. If
you want to record more, delete files you no
longer need (page 196).
LENS ERROR This message appears and the camera turns
off whenever lens performs some unexpected
operation. If the same message appears after
you turn power back on, contact your retailer
or a CASIO service center.
IMPORTANT!
B
286
APPENDIX
Load paper! The printer ran out of paper while printing.
Memory Full Memory is full with images you recorded and/
or of files saved by editing operations. Delete
files you no longer need (page 196).
No Favorites file! The FAVORITE folder does not contain any
files.
Printing Error An error occurred while printing.
• The printer is turned off.
• The printer generated an error, etc.
Record Error Image compression could not be performed for
some reason during image data storage.
Shoot the image again.
Replenish ink! During printing, the printer is running low on
ink or is out of ink.
RETRY POWER
ON
If the lens comes into contact with some
obstacle, this message appears and the
camera turns off. Take action to remove the
obstacle, and try turning on power again.
SYSTEM ERROR Your camera system is corrupted. Contact
your retailer or an authorized CASIO service
center.
The card is
locked.
The LOCK switch of the SD memory card or
SDHC memory card loaded in the camera is in
the locked position. You cannot store images
to or delete images from a memory card that is
locked.
There are no
files.
There are no files in built-in memory or on the
memory card.
There are no
printing images.
Set up DPOF.
There are currently no files specified for
printing. Configure the required DPOF settings
(page 215).
There is no
image to
register.
The setup you are trying to save is for an
image that cannot be saved as a user BEST
SHOT scene.
This card is not
formatted.
The memory card loaded in the camera is not
formatted. Format the memory card (page 50).
This file cannot
be played.
The file you are trying to access is corrupted or
is a type that cannot be displayed by this
camera.
This function
cannot be used.
You attempted to copy images from built-in
memory to a memory card while there is no
memory card loaded in the camera (page
194).
This function is
not supported
for this file.
The function you are trying to use cannot be
performed for some reason.
B
287
APPENDIX
■ Main Specifications
■ Camera Functions
Specifications
Product Type Digital Camera
Model EX-S880
Image Files
Format
Snapshots:
JPEG (Exif Version 2.2); DCF (Design Rule for
Camera File System) 1.0 standard; DPOF
compliant
Movies: H.264/AVC MOV format
Audio: WAV
Recording Media Built-in Memory 10.8 MB
SDHC Memory Card
SD Memory Card
MMC (MultiMediaCard)
MMCplus (MultiMediaCardplus)
Storage Capacity
• Snapshots
Image
Size
(Pixels)
Image
Quality
Approximate
Image File
Size
Approximate
Built-in Memory
(10.8 MB)
Capacity
Approximate SD
Memory Card
(1 GB)
Capacity
8M
(3264 ×
2448)
Fine 4.59 MB 2 images 210 images
Normal 2.46 MB 4 images 393 images
Economy 1.67 MB 6 images 579 images
3:2
(3264 ×
2176)
Fine 4.3 MB 2 images 224 images
Normal 2.31 MB 4 images 418 images
Economy 1.57 MB 6 images 616 images
16:9
(3264 ×
1840)
Fine 3.73 MB 2 images 259 images
Normal 2.02 MB 5 images 478 images
Economy 1.38 MB 7 images 700 images
6M
(2816 ×
2112)
Fine 3.48 MB 3 images 277 images
Normal 1.89 MB 5 images 511 images
Economy 1.3 MB 8 images 743 images
4M
(2304 ×
1728)
Fine 2.5 MB 4 images 386 images
Normal 1.4 MB 7 images 690 images
Economy 900 KB 12 images 1074 images
288
APPENDIX
2M
(1600 ×
1200)
Fine 1.26 MB 8 images 767 images
Normal 790 KB 13 images 1224 images
Economy 470 KB 23 images 2057 images
VGA
(640 ×
480)
Fine 330 KB 33 images 2930 images
Normal 190 KB 56 images 5089 images
Economy 140 KB 76 images 6906 images
Image
Size
(Pixels)
Image
Quality
Approximate
Image File
Size
Approximate
Built-in Memory
(10.8 MB)
Capacity
Approximate SD
Memory Card
(1 GB)
Capacity
• Movies
Image
Quality
(Pixels)
Maximum
File Size
Approximate
Data Rate
(Frame Rate)
Approximate
Built-in Memory
(10.8 MB)
Capacity
Approximate
SD Memory
Card
(1 GB)
Capacity
UHQ
640 × 480
4 GB
5.8 Megabits/
second
(30 frames/
second)
13 seconds 22 minutes,
48 seconds
UHQ Wide
848 ×480
7.0 Megabits/
second
(30 frames/
second)
10 seconds 18 minutes,
53 seconds
HQ
640 × 480
2.8 Megabits/
second
(30 frames/
second)
26 seconds 47 minutes,
24 seconds
HQ Wide
848 ×480
3.4 Megabits/
second
(30 frames/
second)
21 seconds 38 minutes,
59 seconds
Normal
640 × 480
1.4 Megabits/
second
(30 frames/
second)
51 seconds 94 minutes
LP
320 × 240
545 Kilobits/
second
(15 frames/
second)
128 seconds 240 minutes
289
APPENDIX
* The number of image values are approximate and are provided
for reference only. The actual number of images you may be
able to record may be less than that indicated on the monitor
screen.
* Image files sizes are approximate and are provided for
reference only. Actual image file sizes vary depending on
subject type.
* The above values are based on use of a Matsushita Electric
Industrial Co., Ltd. PRO HIGH SPEED SD memory card.
The number of images you can save depends on the type of
memory card you are using.
* To determine the number of images that can be stored on a
memory card of a different capacity, multiply the capacities in
the table by the appropriate value.
Delete 1 file; all files (with memory protection feature)
Effective Pixels
8.1 million
Imaging Element 1/2.5 square pixel primary color CCD
(Total pixels: 8.29 million)
Lens/Focal
Distance
F2.7 to 5.2/f=6.2 to 18 .6 mm (Equivalent to 38
to 114 mm on a 35 mm film camera.)
Six lenses in five groups, including aspherical
lens.
Zoom 3X optical zoom / 4X digital zoom
(Image Size: 8M (3264 × 2448 pixels))
(12X total zoom)
Focusing Contrast Detection Auto Focus
Focus Modes: Auto Focus, Macro Focus, Pan
Focus, Infinity Mode, Manual Focus
AF Area: Spot, Multi or Tracking; with AF
assist lamp
Approximate
Focus Range
(from lens
surface)
Auto Focus: 40 cm to (1.3' to )
Macro Focus: 15 cm to 50 cm (5.9" to 19.7")
Infinity:
Manual Focus: 15 cm to (5.9" to )
Range is affected by optical zoom.
Exposure
Control
Metering: Multi-pattern, center weighted, and
spot by imaging element
Exposure: Program AE
Exposure Compensation: –2EV to +2EV (in 1/
3EV steps)
Shutter CCD shutter, mechanical shutter
Snapshot (Auto): 1/2 to 1/2000 second
• Shutter speed is different for the following
BEST SHOT scenes.
Night Scene: 4 to 1/2000 second
Aperture Value F2.7/8.0 auto switching
* F8.0 is the aperture when an ND filter is
being
used.
• Using optical zoom causes the aperture
value to change.
White Balance Auto, fixed (6 modes), manual
290
APPENDIX
Sensitivity Snapshots (Standard): Auto, ISO 64, ISO 100,
ISO 200, ISO 400, ISO 800
• Snapshots (When “Anti Shake” setting is
“Auto”): ISO 800 (maximum)
Snapshots (When BEST SHOT scene is
“Anti Shake”): ISO 800 (maximum)
Snapshots (When BEST SHOT scene is
“High Sensitivity”): ISO 1600 (maximum)
Movies: Auto
Self-timer Trigger Times: 10 seconds, 2 seconds, Triple
Self-timer
Built-in Flash Flash Modes: Auto, Off, On, Soft Flash, Red-
eye reduction
Approximate Flash Range:
Flash Range: Wide Angle Optical Zoom:
0.15 to 3.9 meters (0.5' to 12.8')
Telephoto Optical Zoom: 0.4 to 2.0 meters
(1.3' to 6.6')
• Flash Continuous Shutter
Wide Angle Optical Zoom: 0.4 to 1.7 meters
(1.3' to 5.6')
Telephoto Optical Zoom: 0.4 to 0.9 meters
(1.3' to 3.0')
* ISO Sensitivity: “Auto”
* Depends on zoom factor.
Recording Snapshots (with audio); Macro; Self-timer;
Continuous Shutter; BEST SHOT (scenes
other than Short Movie, Past Movie, and Voice
Recording); Face Recognition; movie with
a
udio (Movie, Short Movie, Past Movie,
YouTube); audio (Voice Recording)
* Audio is monaural.
Approximate
Audio Recording
Times
Audio Snapshot: 30 seconds per image
After Recording: 30 seconds per image
Voice Recording: 33 minutes, 43 seconds
(when using built-in memory)
Monitor Screen 2.8-inch Wide TFT color LCD
230,400 (960 × 240) pixels
Viewfinder Monitor Screen
Timekeeping
Functions
Built-in quartz digital clock
Date and Time: Recorded with image data,
Time stamp
Auto Calendar: To 2049
World Time 162 cities in 32 time zones
City name, date, time, summer time
Input/Output
Terminals
Cradle contact
USB USB 2.0 Hi-Speed compatible
Microphone Monaural
Speaker Monaural
291
APPENDIX
■ Power Supply
Approximate Battery Life
All of the values provided below represent the approximate
amount of time under normal temperature (23°C (73°F)) before
the camera turns off. These values are not guaranteed. Low
temperatures shorten battery life.
• Battery: NP-20 (Rated Capacity: 700 mAh)
• Recording Medium: SD memory card 1 GB (The above
values are based on use of a Matsushita Electric Industrial
Co., Ltd. PRO HIGH SPEED SD memory card.)
• Measurement Conditions
*1Number of Shots (CIPA)
In accordance with CIPA standards
Normal temperature (23°C (73°F)), monitor on, zoom
operation between full wide and full telephoto every 30
seconds, during which two images are shot with flash; pow er
turned off and back on every time 10 images are shot.
*2 Continuous Playback Time
Standard temperature (23°C (73°F)), one-image scroll
approximately every 10 seconds
*3 Approximate continuous recording time
Power Requirements Rechargeable Lithium Ion Battery
(NP-20) × 1
Number of Shots (CIPA)
*1
220 shots
Continuous Playback (Snapshots)
*2
240 minutes
Continuous Movie Recording 90 minutes
Continuous Voice Recording
*3
310 minutes
• The above values are based a new battery, starting from a
full charge. Repeated charging shortens battery life.
• Frequency of flash, zoom, and Auto Focus usage, and the
time the camera is on greatly affects recording time and
number of shots values.
292
APPENDIX
■ Rechargeable Lithium Ion Battery (NP-20)
■ USB Cradle (CA-37)
■ Special AC Adaptor (Inlet Type) (AD-C52G)
• Power cord precautions for use in Singapore
The power cord set is not supplied. The power cord used
must comply with relevant national and/or international
standards.
Power
Consumption
3.7 V DC; Approximately 4.3 W
Dimensions 94.5 (W) × 60.4 (H) × 17.3 (D) mm (3.7"(W)
× 2.4"(H) × 0.7"(D)) (Excluding projections;
13.7 mm (0.5") at thinnest point)
Weight Approximately 128 g (4.5 oz) (excluding
battery and bundled accessories)
Bundled
Accessories
Rechargeable Lithium Ion Battery (NP-20);
USB Cradle (CA-37); Special AC Adaptor
(AD-C52G)/AC Power Cord; USB Cable; AV
Cable; Strap; CD-ROMs (2); Basic
Reference
Rated Voltage 3.7 V
Rated
Capacitance
700 mAh
Operating
Temperature
0 to 40°C (32 to 104°F)
Dimensions 33.0(W) × 50.0(H) × 4.7(D) mm
(1.3"(W) × 2.0"(H) × 0.19"(D))
Weight Approximately 16 g (0.56 oz)
Input/Output
Terminals
Camera contact; USB port; external power
supply terminal (DC IN 5.3 V); AV terminal
(AV OUT: NTSC/PAL standards)
Power
Consumption
5.3 V DC, Approximately 3.2 W
Dimensions 109 (W) × 24 (H) × 58 (D) mm
(4.3"(W) × 0.9"(H) × 2.3"(D))
(Excluding projections)
Weight Approximately 47 g (1.7 oz)
Input Power 100 to 240 V AC 50/60Hz 83 mA
Output Power 5.3 V DC 650 mA
Dimensions 50 (W) × 20 (H) × 70 (D) mm
(2.0"(W) × 0.8"(H) × 2.8"(D))
(Excluding projections and cable)
Weight Approximately 90 g (3.2 oz)
293
CASIO COMPUTER CO.,LTD.
6-2, Hon-machi 1-chome
Shibuya-ku, Tokyo 151-8543, Japan
MA0710-CMF
… 248 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Casio EX-S880 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Casio EX-S880 in the language / languages: English as an attachment in your email.

The manual is 5,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Casio EX-S880

Casio EX-S880 User Manual - German - 293 pages

Casio EX-S880 User Manual - Dutch - 293 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info