27058

Casio E200 Manual

54
Zoom out
Zoom in
Previous page
1/65
Next page
54
7. You should not need to change any settings in Advanced. Most ISPs now use a dynamically-
assigned address. If the ISP you are connecting to does not use a dynamically-assigned
address, tap Advanced and then the TCP/IP tab, and enter the address. When finished, tap
OK and then Next.
8. Enter the access phone number, and tap Next.
9. Select other desired options, and tap Finish.
10.In the Dialing Locations tab, specify your current location and phone type (most phone lines
are tone). These settings will apply to all connections you create.
To start the connection, simply start using one of the following programs. Your device will
automatically begin connecting. Once connected, you can:
• Send and receive e-mail messages by using Inbox. Before you can use Inbox, you need to
provide the information it needs to communicate with the e-mail server. For specific
instructions, see “Connect Directly to an E-mail Server,” later in this chapter.
• Visit Web and WAP pages by using Pocket Internet Explorer. For more information, see
Chapter 7.
• Send and receive instant messages with MSN Messenger. For more information, see Chapter 6.
To create an Ethernet connection to an ISP:
1. You do not need to create a new connection on your Pocket PC. Instead, you must purchase
and configure an Ethernet card that is compatible with your Pocket PC.
2. Obtain the following information from your ISP: user name, password, and domain name.
3. Insert the Ethernet card into your device. For instructions on inserting and using the Ethernet
card, see the owner’s manual for the card.
4. The first time you insert the card, Network Settings will appear automatically so that you can
configure the Ethernet card. Most networks use DHCP, so you should not have to change these
settings unless your network administrator instructs you to do so. Tap OK. (If it does not
appear or to change settings later, tap
and then Settings. In the Connections tab, tap
Network, tap the adapter you want to change, and then tap Properties.)
5. Connect the Ethernet card to the network by using a network cable. For information, see your
owner’s manual.
6. Tap
, Settings, Connections tab, and then Connections. From the My network card
connects to list, select The Internet.
To start the connection, simply start using one of the programs listed in the preceding section.
Once connected, you can perform the same activities as listed in the preceding section.
Connect to Work
If you have access to a network at work, you can send e-mail messages, view intranet pages,
synchronize your device, and possibly access the Internet. You can connect to work in one of two
ways:
• Create a modem connection by using a RAS account. Before you can create this modem
connection, your network administrator will need to set up a RAS account for you. If this is the
method you want to use, see “To create a modem connection to a network.” Your network
administrator may also give you VPN settings.
• Use an Ethernet card and a net tap to connect to the network. If this is the method you want to
use, see “To create an Ethernet connection to a network.”
… 54 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Casio E200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Casio E200 in the language / languages: English as an attachment in your email.

The manual is 0,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info