723415
4
Zoom out
Zoom in
Previous page
1/4
Next page
Operation Guide DQD-105
4
TO SPECIFY THE ILLUMINATION ON TIME
1. While the Normal Timekeeping Screen is displayed, press the AUTO LIGHT button (3).
2. Within about five seconds, use the Alarm Time Set buttons (4) to turn on Auto Light.
3. Within about five seconds, press the AUTO LIGHT button (3).
This will cause the current Auto Light start time setting to appear on the display.
4. Within about five seconds, use the Alarm Time Set buttons (4) to change the Auto Light start time setting. You
can change the Auto Light start time in 10-minute increments.
5. After the setting is the way you want, simply do not perform any key operation for about five seconds. The clock
will return to the Normal Timekeeping Screen automatically.
* If you allow about five seconds to elapse without performing any operation during any of the above steps, the
clock will return to the Normal Timekeeping Screen automatically.
BATTERY REPLACEMENT
Replace batteries whenever the display of the clock becomes dim and difficult to read.
1. Open the battery compartment cover as shown in the illustration.
2. Remove all of the old batteries.
3. Load a full set of new batteries. Make sure that their positive (+) and negative (–) ends face in the correct
directions. If you load batteries incorrectly, they can burst and damage the clock.
4. Replace the battery compartment cover.
5. Press the RESET button (6). Be sure to press the RESET button (6) after replacing batteries.
Battery precautions
Keep batteries out of the reach of small children. If a battery is swallowed accidentally, contact your physician
immediately.
Be sure to load the batteries with their positive (+) and negative (–) ends facing correctly.
Never mix old and new batteries, or batteries of different brands.
Never charge the batteries that come with the clock.
Should batteries ever leak while in the clock, wipe out the fluid with a cloth, taking care not to let any get onto
your skin.
Replace the batteries at least once a year, even if the current batteries are working properly.
The batteries that come with the clock lose some of their power during transport and storage.
Auto Light Off Auto Light On
Alarm Time Set buttons (4)
Alarm Time Set buttons (4)
AUTO LIGHT button (3) Five seconds
Normal Timekeeping Screen
After turning on Auto Light,
press the AUTO LIGHT button (3)
Current Illumination On Time Setting
Five seconds
Normal Timekeeping Screen
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Casio DQD-105 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Casio DQD-105 in the language / languages: English as an attachment in your email.

The manual is 0,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info