723395
2
Zoom out
Zoom in
Previous page
1/2
Next page
USER’S GUIDE DQ-643
2
USING THE ALARM
The alarm sounds and the backlight turns on when the alarm time you set is reached. You can also use the Alarm
Switch (
55
55
5)
to select the snooze alarm feature.
Setting the Alarm Time
Use the Alarm Time Set buttons (
22
22
2)
to set the alarm time.
Pressing an Alarm Time Set button (
22
22
2)
causes the alarm time to appear in place of the date on the display.
Holding down or changes the digits at high speed.
Turning the Alarm On and Off
Use the Alarm Switch (
55
55
5)
on the side of the clock to turn the alarm on and off, and to select the snooze feature.
Description
The alarm sounds at the preset time for one
minute, and seven more times every five
minutes thereafter. Even if you stop the alarm
sound by pressing the Snooze/Light button
(
11
11
1), the alarm operation is performed again
five minutes later.
The indicator Zz flashes on the display to
indicate that the snooze feature is activated.
The alarm sounds at the preset time for one
minute.
The alarm does not sound.
Alarm Switch Setting
SNZ ON
Zz
ALM ON
(
)
OFF
( )
USING THE LIGHT
Pressing the Snooze/Light button (
11
11
1) turns on the light and illuminates the display for easy reading in the dark.
Important!
Overuse of the light can shorten battery life.
BATTERY REPLACEMENT
Replace batteries whenever the display of the clock becomes dim and difficult to read.
1. Pressing down lightly on the battery compartment cover, slide it downwards and remove it.
2. Remove both old batteries.
3. Load new batteries. Make sure that their positive (+) and negative (–) ends face in the correct directions. If you
load batteries incorrectly, they can burst and damage the clock.
4. Replace the battery compartment cover.
5. Press the RESET button (
44
44
4). Be sure to press the RESET button (
44
44
4) after replacing batteries.
Battery precautions
Be sure to load the batteries with their positive (+) and negative (–) ends facing correctly.
Replace the batteries at least once a year, even if the current batteries are working properly.
Never charge the batteries that come with the clock.
Should the batteries ever leak while in the clock, wipe out the fluid with a cloth, taking care not to let any get onto
your skin.
The batteries that come with the clock lose some of their power during transport and storage.
Never mix old and new batteries, or batteries of different brands.
Alarm Time
Press to change the alarm
time setting ().
Press to change the alarm
time setting ().
Alarm Time Set buttons
The alarm time appears in place of the date on the display whenever the alarm switch is set to ON or SNZ.
The backlight also turns on for the first four seconds that the alarm sounds.
The alarm sound changes over five levels as it sounds.
Stopping the Alarm
When alarm is sounding, press the Snooze/Light button (
11
11
1)
to stop it. When the snooze feature is turned on,
the alarm will sound again in about five minutes.
To turn off the snooze feature, slide the Alarm Switch (
55
55
5)
to OFF.
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Casio DQ-643 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Casio DQ-643 in the language / languages: English as an attachment in your email.

The manual is 0,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info