723373
2
Zoom out
Zoom in
Previous page
1/2
Next page
Operation Guide DQ-584/584B
USING THE ALARM
The alarm sounds when the current time reaches the alarm time. The face illuminates for the first 5 seconds of the
alarm operation as well. The alarm tone alternates between two levels.
You can also use the Alarm Mode selector 6 to select the snooze alarm feature.
Setting the Alarm Time
1. Slide the Mode switch 5 to
“AL”. This causes the alarm time
setting to flash on the display.
2. Use the 12 24HR (YEAR)
button 2, MIN (DATE) button
3, and HR (MONTH) button 4
to set the alarm time. Holding
down the MIN (DATE) button 3
or HR (MONTH) button 4
changes the corresponding
setting at high speed.
Make sure you set the correct
am/pm time if you are using 12-
hour timekeeping. The PM
indicator indicates PM times,
while nothing is indicated for AM
times.
3. Slide the Mode switch 5 to “NORMAL”. This will cause
the figures on the display to stop flashing.
4. Turning the Alarm On and Off
Use the Alarm Mode selector 6 on the top of the clock
to turn the alarm on and off, and to select the snooze
feature.
Alarm Mode selector Description
The alarm sounds at the preset time for one minute. You can stop the alarm by
pressing the SNOOZE/LIGHT button 1. The snooze feature will cause the alarm to
sound again about five minutes after it stops. A
indicator flashes on the display
during the period between alarms.
If you keep stopping the alarm manually by pressing the SNOOZE/LIGHT button
11
11
1
The alarm will sound again, about five minutes after you stop it.
If the alarm is not stopped manually
The alarm will sound three times for one minute, at five-minute intervals. After that the
snooze feature will be cancelled automatically.
The alarm sounds at the preset time for one minute.
The alarm does not sound.
SNZ
ON
OFF
Hour Minutes
Press to toggle between
12-hour and 24-hour
timekeeping.
Press to advance the
alarm time minute setting.
Press to advance the
alarm time hour setting.
USING THE LIGHT
Hold down the SNOOZE/LIGHT button 1 to illuminate the display. The light will go out automatically after about
three seconds, even if you keep the button depressed.
Important!
Overuse of the light can shorten battery life.
THERMOMETER FUNCTIONS
A built-in sensor measures temperature and shows the measured value on the display.
Temperature Measurements
The temperature display shows “LO” for temperatures below –19.5°C (–3.0°F) and “HI” for temperatures above
70°C (158°F).
Though temperature readings are displayed up to 0°C (32°F) and greater than 41°C (105°F), note that such
readings actually are outside the guaranteed temperature range of this clock.
Switching between Celsius and Fahrenheit
Push the °C/ °F button 7 to select either Celsius (°C) or Fahrenheit (°F).
Celsius (°C) Fahrenheit (°F)
°C/°F button (7)
BATTERY REPLACEMENT
Replace the battery whenever the display of the clock becomes dim and difficult to read.
1. Open the battery compartment cover as shown in the illustration.
2. Remove the old battery.
3. Load a new battery. Make sure that the positive (+) and negative () ends of the battery are facing correctly. An
incorrectly loaded battery can burst and damage the clock.
4. Replace the battery compartment cover.
Battery precautions
Keep batteries out of the reach of small children. If a battery is swallowed accidentally, contact your physician
immediately.
Be sure to load the battery with its positive (+) and negative () ends facing correctly.
Never charge the battery that comes with the clock.
Should a battery ever leak while in the clock, wipe out the fluid with a cloth, taking care not to let any get onto
your skin.
Replace the battery at least once a year, even if the current battery is working properly.
The battery that comes with the clock loses some power during transport and storage.
The light also turns on for the first five seconds that the alarm sounds.
Stopping the Alarm
When alarm is sounding, press the SNOOZE/LIGHT button 1 to stop it. When the snooze feature is turned on,
the alarm will sound again in about five minutes.
To turn off the snooze feature, slide the Alarm Mode selector 6 to OFF.
Testing the alarm
While the mode switch setting is NORMAL, hold down the HR (MONTH) button 4 and MIN (DATE) button 3
at the same time to sound the alarm. All of the displays digital segments will appear at this time. Release the
buttons to stop the alarm.
2
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Casio DQ-584B at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Casio DQ-584B in the language / languages: English as an attachment in your email.

The manual is 0,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info