466824
34
Zoom out
Zoom in
Previous page
1/45
Next page
E-32
Problem Possible Cause See pageAction
No keyboard Sound
Any of the following symptoms while
using battery power.
Auto Accompaniment does not sound.
The key or tuning does not match
when playing along with another
instrument.
Missing Song Bank tune.
No sound is produced when playing
MIDI data from a computer.
The bass notes of General MIDI data
being played back by a computer are
one octave too low.
Playing on the keyboard produces an
unnatural sound when connected to a
computer.
Static noise when a microphone is
connected.
No microphone sound
1. Power supply problem.
2. Power is not turned on.
3. Volume setting is too low.
4. The POWER/MODE switch is in
the CASIO CHORD or FINGERED
position.
Low battery power
Auto accompaniment volume is set to
0.
The tuning or transpose parameter is
set to a value other than 0 or 00.
1. Left-hand or right-hand part is
turned off.
2. Accompaniment volume is set to 0.
MIDI cables are not connected
properly.
TONE MAP is turned N.
The computers MIDI THRU function
is turned on.
1. Use of a microphone that is a
different from the type that is
recommended.
2. Use of the microphone in the
vicinity of fluorescent lighting.
1. Microphone volume setting is too
low.
2. Microphone on/off switch is set to
OFF.
Pages
E-13, 14
Page E-16
Page E-16
Page E-16
Pages
E-13, 14
Page E-21
Page E-29
Page E-24
Page E-21
Page E-30
Page E-31
See the
documentation
that comes
with your
computer or
sequencer.
Page E-17
Page E-17
Page E-17
Page E-17
Troubleshooting
1. Correctly attach the AC adaptor,
make sure that batteries poles (+/)
are facing correctly, and check to
make sure that batteries are not
dead.
2. Set the POWER/MODE switch to
the NORMAL position.
3. Use the MAIN VOLUME buttons to
increase volume.
4. Normal play is not possible on the
accompaniment keyboard while the
POWER/MODE switch is set to
CASIO CHORD or FINGERED.
Change the POWER/MODE switch
setting to NORMAL.
Replace the batteries with a set of new
ones or use the AC adaptor.
Use the ACCOMP VOLUME button to
increase the volume.
Change the transpose or tuning
parameter value to 0 or 00.
1. Check the display to see if the
indicator for one of the parts is not
displayed. If so, press the parts
button (LEFT ON/OFF, RIGHT
ON/OFF) to turn it on.
2. Adjust accompaniment volume.
Connect MIDI cables properly.
Change TONE MAP parameter to G.
Turn off the MIDI THRU function on
the computer or turn off LOCAL
CONTROL on the keyboard.
1. Use a recommended type
microphone.
2. Move the microphone away from
source of the static.
1. Increase the microphone volume
setting.
2. Change the microphone on/off
switch setting to ON.
627A-E-034A
Dim power indicator
Instrument does not turn on
Display that is flickering, dim, or difficult to read
Abnormally low speaker/headphone volume
Distortion of sound output
Occasional interruption of sound when playing at high
volume
Sudden power failure when playing at high volume
Flickering or dimming of the display when playing at
high volume
Continued sound output even after you release a key
A tone that is totally different from the one that is
selected
Abnormal rhythm pattern and Song Bank play
Loss of power, sound distortion, or low volume when
playing from a connected computer or MIDI device
Abnormally low microphone volume
Distortion of microphone input
Dim power supply indicator when a microphone is
used
Sudden power failure when using the microphone
34


Need help? Post your question in this forum.

Forumrules
1

Forum

casio-ctk-700

Reset search

  • Casio ctk 700 LCD display light not working. When I turn on the keyboard remains dark.

    n Submitted on 2-10-2021 at 13:13

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Casio CTK-700 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Casio CTK-700 in the language / languages: English as an attachment in your email.

The manual is 2,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Casio CTK-700

Casio CTK-700 User Manual - German - 48 pages

Casio CTK-700 User Manual - Dutch - 51 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info