466833
42
Zoom out
Zoom in
Previous page
1/54
Next page
E-40
NOTE
The pitch of a note depends on the tone that is being used, as shown in
the Note Table on page A-1. Whenever this keyboard receives a note num-
ber that is outside its range for that tone, the same tone in the nearest
available octave is substituted.
PROGRAM CHANGE
This is the tone selection message. PROGRAM CHANGE can con-
tain tone data within the range of 0 to 127.
A PROGRAM CHANGE message is sent out through this keyboards
MIDI OUT terminal whenever you manually change its tone num-
ber. Receipt of a PROGRAM CHANGE message from an external ma-
chine changes the tone setting of this keyboard.
NOTE
This keyboard supports 128 tones in the range 0 to 127. However, Chan-
nel 10 is a percussion-only channel, and Channels 0, 8, 16, 24, 25, 32, 40,
48, and 62 correspond to the nine drum set sounds of this keyboard.
PITCH BEND
This message carries pitch bend information for smoothly sliding the
pitch upwards or downwards during keyboard play. This keyboard
does not send pitch bend data, but it can receive such data.
CONTROL CHANGE
This message adds effects such as vibrato and volume changes ap-
plied during keyboard play. CONTROL CHANGE data includes a
control number (to identify the effect type) and a control value (to
specify the on/off status and depth of the effect).
The following is a list of data that can be send or received using CON-
TROL CHANGE.
Effect Control Number
Modulation 1
Volume 7
Pan 10
Expression 11
Hold1 64
Sostenuto 66
Soft Pedal 67
RPN*100 / 101
Data Entry 6 / 38
indicates receive-only messages
*RPN stands for Registered Parameter Number, which is a special
control change number used when combining multiple control
changes. The parameter being controlled is selected using the con-
trol values of control numbers 100 and 101, and then settings are
made using the control values of DATA ENTRY (control numbers
6 and 38).
This keyboard uses RPN to control this keyboards pitch bend sense
(pitch change width in accordance with bend data) from another
external MIDI device, transpose (this keyboards overall tuning
adjusted in halftone units), and tune (this keyboards overall fine
tuning).
NOTE
Sustain (control number 64), sostenuto (control number 66), and soft (con-
trol number 67) effects applied using the foot pedal are also applied.
ALL SOUND OFF
This message forces all sound being produced over the current chan-
nel to turn off, regardless of how the sound is being produced.
ALL NOTES OFF
This message turns off all note data sent from an external device and
currently being sounded on the channel.
Any notes being sustained using a sustain pedal or sostenuto ped-
al continue to sound until the next pedal off.
RESET ALL CONTROLLERS
This messages initializes pitch bend and all other control changes.
SYSTEM EXCLUSIVE*
This message is used to control system exclusives, which are tone
fine adjustments that are unique to a particular machine. Originally,
system exclusives were unique to a particular model, but now there
are also universal system exclusives that are applicable to machines
that are different models and even produced by different manufac-
turers.
The following are the system exclusive messages supported by this
keyboard.
GM SYSTEM ON ([F0][7E][7F][09][01][F7])
GM SYSTEM ON is used by an external machine to turn on this key-
boards GM system. GM stands for General MIDI.
GM SYSTEM ON takes more time to process than other messages,
so when GM SYSTEM ON is stored in the sequencer it can take
more than 100msec until the next message.
GM SYSTEM OFF ([F0][7E][7F][09][02][F7])
GM SYSTEM OFF is used by an external machine to turn off this key-
boards GM system.
702A-E-042A
42


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Casio CTK-573 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Casio CTK-573 in the language / languages: English as an attachment in your email.

The manual is 3,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Casio CTK-573

Casio CTK-573 User Manual - German - 56 pages

Casio CTK-573 User Manual - Dutch - 56 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info