466816
33
Zoom out
Zoom in
Previous page
1/46
Next page
E-31
Parameters and Their Displays
KEYBOARD CHANNEL (Basic Channel) (Default: 01)
This parameter specifies the keyboard MIDI message send channel.
TONE MAP G/N (Default: N)
N: This settings specifies the normal tone map, which allows receipt
of a program change value in the range of 0 to 99. Only tones that
correspond to the 100 built-in tones of this keyboard can be played,
and tone numbers outside this range are ignored.
G: This setting specifies the General MIDI tone map, which allows
receipt of a program change value in the range of 0 to 127. Each
of the 128 General MIDI tones is automatically assigned to one of
the keyboards 100 built-in tones as shown on page A-1. Select
this setting when you want to listen to General MIDI data from a
computer or other external equipment.
NOTES
Playing a Song Bank tune causes all MIDI parameters to revert to their
default settings. Also, MIDI messages cannot be received while the key-
board is in the Song Bank Mode.
Song Bank data cannot be sent as MIDI data.
TONE
RHYTHM
SONG BANK
TONE
RHYTHM
SONG BANK
CONTROL CHANGE
This message adds effects such as vibrato and volume changes ap-
plied during keyboard play. CONTROL CHANGE data includes a
control number (to identify the effect type) and a control value (to
specify the on/off status and depth of the effect).
The following is a list of data that can be received using CONTROL
CHANGE.
Effect Control Number
VOLUME 7
PAN 10
HOLD1 * 64
MODULATION 1
* Pressing the foot pedal causes the sustain effect (HOLD1) to be sent
(control number 64).
Changing MIDI Settings
This keyboard lets you change the settings of two MIDI parameters:
TONE MAP and KEYBOARD CHANNEL.
To change MIDI parameters
1. Press the TRANSPOSE/TUNE/MIDI button either
three or four times to select the parameter you want.
Press the TRANSPOSE/TUNE/MIDI button three times: KEY-
BOARD CHANNEL
Press the TRANSPOSE/TUNE/MIDI button four times: TONE
MAP
Example: To select the TONE MAP parameter.
2. Use [+] and [] to change the setting of the parame-
ter.
Example: To change the TONE MAP parameter value to G
(GM).
If you accidentally go past parameter you want, keep press-
ing the TRANSPOSE/TUNE/MIDI button until parameter
you want reappears on the display.
If you leave the parameter selection screen on the display
for about five seconds without doing anything, the parame-
ter selection screen is automatically cleared.
TONE
RHYTHM
SONG BANK
TONE
RHYTHM
SONG BANK
TONE
RHYTHM
SONG BANK
622A-E-033A
[+]/[]
TRANSPOSE/TUNE/MIDI
01.7.26, 10:41 AMPage 31
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Casio CTK-471 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Casio CTK-471 in the language / languages: English as an attachment in your email.

The manual is 1,19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Casio CTK-471

Casio CTK-471 User Manual - German - 48 pages

Casio CTK-471 User Manual - Dutch - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info