586778
39
Zoom out
Zoom in
Previous page
1/47
Next page
English
Reference
EN-37
Some notes are cut off while they are playing. Notes are cut off whenever the number of notes being sounded
exceeds the maximum polyphony value of 48 (24 for some tones).
This does not indicate malfunction.
The volume or tone setting I made has changed. Adjust the main volume setting (page EN-6).
Turn power off and then back on to initialize all Digital Keyboard
settings (page EN-6).
Replace the batteries with new ones or switch over to AC adaptor
power (page EN-5).
In certain keyboard ranges, the volume and tone
quality sound are slightly different from those in other
keyboard ranges.
This is due to system limitations. It does not indicate malfunction.
With some tones, octaves do not change at the far
ends of the keyboard.
This is due to system limitations. It does not indicate malfunction.
The pitch of the notes does not match other
accompanying instruments or sounds strange when
played long with other instruments.
Check and adjust the transpose (page EN-10) and tuning settings
(page EN-10).
Turn power off and then back on to initialize all Digital Keyboard
settings (page EN-6).
The reverb of notes seems to change suddenly. Check and adjust the reverb setting (page EN-9).
Turn power off and then back on to initialize all Digital Keyboard
settings (page EN-6).
Sounds I sampled were deleted. Be sure to press the power button to turn off power. Unplugging or
disconnecting the AC adaptor without first pressing the power button
to turn off power will cause sampled sounds to be deleted.
Even though I didn’t input anything with the built-in
microphone, the message “Sampled!” appears on
the display when I release the SAMPLING button.
Perform the sampling operation where it is quiet.
You may be making noise, which is picked up as sampled sound,
when releasing the SAMPLING button release operation. If this is
the case, release the SAMPLING button carefully to avoid making
noise.
Use the procedure under “Starting a Sampling Operation Manually”
(page EN-15) to turn off SampAuto, and then try manual sampling.
Rhythms played in the VOICE PERCUSSION Mode
sound strange and unnatural.
In order to assure proper balance for the rhythm, be sure to record all
five short samples. Playing a rhythm in the VOICE PERCUSSION
Mode while there is no short sample will cause a preset sample to
sound. If there is even a single short sample recorded, rhythm
instruments will sound only for the recorded short sample.
Operation
When I perform a skip forward or skip back
operation, the skip operation moves multiple song
measures instead of only a single measure.
While song playback is stopped or a Step Up Lesson is in progress,
skip forward and skip back operations are performed in phrase units
(page EN-18).
Computer Connection
I can’t exchange data between the Digital Keyboard
and a computer.
Check to make sure that the USB cable is connected to the Digital
Keyboard and computer, and that the device is selected correctly
with your computer’s music software settings (page EN-32).
Turn off the Digital Keyboard and then exit the music software on
your computer. Next, turn the Digital Keyboard back on and then
restart the music software on your computer.
Symptom Action
CTK2400_A5_x1a_EN_ES.indd 39 2014/02/10 19:12:55
39


Need help? Post your question in this forum.

Forumrules
1

Forum

casio-ctk-2090

Reset search

  • WHERE CAN I GET A HARD COPY OF THE CYK2090 USER MANUAL? Submitted on 11-10-2020 at 18:04

    Reply Report abuse
  • No matter how many times I have I tried, I cannot get 001 off the default. I code in everything to be able to play and never it fails, I get 001 playing over it. HELP! STOP does not do it. Please respond. Submitted on 11-9-2018 at 03:54

    Reply Report abuse
  • Does this keyboard have the ability to sustain the keys to give a longer sound. It seems to sound the note and then fades immediately. Submitted on 10-9-2018 at 01:59

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Casio CTK-2090 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Casio CTK-2090 in the language / languages: English as an attachment in your email.

The manual is 2,19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Casio CTK-2090

Casio CTK-2090 User Manual - German - 47 pages

Casio CTK-2090 User Manual - Dutch - 47 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info