723292
31
Zoom out
Zoom in
Previous page
1/147
Next page
Controlling Sounds
EN-30
1.
Connect a pedal to the fp PEDAL2/
EXPRESSION jack.
2.
Press bk FUNCTION.
3.
Use the [1] (V) and [3] (W) bm number keys
to display “Cntrller”, and then press [6]
(ENTER).
4.
Use the [1] (V) and [3] (W) keys to display
“Pedal”, and then press [6] (ENTER).
5.
Use the [1] (V) and [3] (W) keys to display
“Pd2 Type”.
6.
Use bn [–] and [+] or the bl dial to change the
setting value.
* For details, see “Connectable Expression Pedals” (page
EN-31).
If a pedal does not work correctly after configuring
settings, it could mean that the connected pedal is not
compatible with the “Pd2 Type” setting above. Try
changing the “Pd2 Type” to a different setting and see
if this results in correct operation.
7.
Depending on the selected pedal type, perform
one of the operations below.
Y Foot Switch Pedal
Select the pedal effect.
(1) Use the [1] (V) and [3] (W) bm number keys to
display “Pd2Efect”.
(2) Use bn [–] and [+] or the bl dial to change the
setting value.
For details about pedal effects that correspond to
each setting value, see the “Pedal Function List”
(page EN-31).
Y Expression Pedal
Selecting “2 ExpType1” or “3 ExpType2” in step 6 of this
procedure automatically causes “5 Exp.” (Expression) to
be selected for “Pd2Efect”. If you connect an expression
pedal to the fp PEDAL2/EXPRESSION jack, use the
procedure below to calibrate the pedal before using it.
(1) Use the [1] (V) and [3] (W) bm number keys to
display “ExPCalib”, and then press [6] (ENTER).
This displays “Sure?”
(2) Press bn [+] (YES) to start adjustment or bn [–] (NO)
to cancel the adjustment operation.
(3) While “Highest” is displayed, depress the pedal and
press [6] (ENTER).
(4) While “Lowest” is displayed, release the pedal and
press [6] (ENTER).
The message “Complete” will appear when the
operation is complete.
To have an expression pedal connected to the
fp PEDAL2/EXPRESSION jack perform the
same operation (sustain, etc.) as a foot switch
pedal, perform the operation under Foot Switch
Pedal” above to select a pedal effect.
8.
Turn pedal effects on or off for each keyboard
part as required.
Perform step 6 under “To connect a pedal to the
fo PEDAL1 jack” (page EN-29). Note, however, that
you should display “Pd2Enabl” in step (1).
9.
When the setting is the way you want, long-
press the [4] (EXIT) bm number key to exit the
setting screen.
To connect a pedal to the fp PEDAL2/
EXPRESSION jack
To use this type of pedal: Select this setting:
Foot switch pedal 1 Foot Sw
Expression pedal (Type 1 polarity*) 2 ExpType1
Expression pedal (Type 2 polarity*) 3 ExpType2
CT-X9000_8000IN_EN.book 30 ページ 2018年4月12日 木曜日 午後1時8分
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Casio CT-X9000IN at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Casio CT-X9000IN in the language / languages: English as an attachment in your email.

The manual is 11,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info