723292
11
Zoom out
Zoom in
Previous page
1/147
Next page
Preparing a Power Supply
EN-10
While Auto Resume is turned on, the current settings of the
items described below are retained even when power is
turned off (as long as power continues to be supplied to the
Digital Keyboard, and power is turned off normally by pressing
1P (power) or by triggering of Auto Power Off).
Current settings of the items below
Tone (UPPER 1, LOWER 1, UPPER 2, LOWER 2),
Rhythm, Song number, Music Preset number, Tempo,
Transpose, Octave Shift, [ACCOMP] indicator displayed/
not displayed status
On/off status of the functions below
Split, Layer, Portamento, Auto Harmonize or Arpeggiator,
CT-X9000IN: Modulation/Assignable*
1
, Part Mode
Function setting*
2
(page EN-107) status
Mixer (page EN-62) setting status
CT-X9000IN: Category selection, tone and rhythm
category selection status, last selected tone/rhythm in
each tone/rhythm category
*1 When the setting configured with the following operation is
“2 Toggle”: MODULATION/ASSIGNABLE (Mod/Asgn) 3
Button operation (Btn Act) (page EN-109).
*2 Including Reverb, Chorus, Delay, and other effect settings
included in the function settings.
The next time power is turned on, the Digital Keyboard is
returned to its setup state when power was last turned off.
Perform the procedure under “To configure function settings
with the bk FUNCTION button” (page EN-107) and turn on
Auto Resume: Other (Other) 3 Auto Resume (AtResume)
(page EN-112).
Regardless of Auto Resume is on or off, the settings of the
items below, which are included in function settings (page
EN-107), are retained even when power is turned off (as
long as power continues to be supplied to the Digital
Keyboard, and power is turned off normally by pressing
1P (power) or by triggering of Auto Power Off).
Equalizer, Tuning, Registration Memory Freeze Target,
Pedal 2 type, Expression pedal calibration, Tap rhythm
start, Examination Mode, Display contrast
Auto Resume does not restore the status of the setting
items below.
Touch on/off status, Note value setting, Phrase recording
setting, Synchro standby, Audio Mode file selection and
playback state, Local control setting.
1.
Press bk FUNCTION.
2.
Press the [1] (V) bm number key to display
“Other”.
3.
Press the [6] (ENTER) bm number key.
4.
Use the [1] (V) and [3] (W) bm number keys
to display “Contrast”.
5.
Use bn [–] and [+] or the bl dial to change the
setting value.
6.
When the setting is the way you want, long-
press the [4] (EXIT) bm number key to exit the
setting screen.
Auto Resume
Adjusting Display Contrast
Other
Contrast
Current setting value
CT-X9000_8000IN_EN.book 10 ページ 2018年4月12日 木曜日 午後1時8分
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Casio CT-X9000IN at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Casio CT-X9000IN in the language / languages: English as an attachment in your email.

The manual is 11,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info