723289
22
Zoom out
Zoom in
Previous page
1/74
Next page
EN-21
Playing Built-in Songs
You can use the following procedure to change the speed
(tempo) in order to slow down playback to practice difficult
passages, etc.
See “Changing the Tempo Setting” (page EN-11).
Use the following procedure to adjust the balance between
the volume of what you play on the keyboard and song
playback volume.
See Function No.9 underFUNCTION Button (cs)
Functions” (page EN-43).
The procedure below lets you select the same keyboard tone
as the one being used in the song and play along with your
favorite tunes.
1.
After selecting a song, hold down bn SONG
BANK for about two seconds until the
displayed tone name changes to the tone name
of the song.
If your currently selected tone is the same as the song
tone, the display contents will not change.
2.
Play along with song playback.
If you select a song that uses different tones for left and
right hand play, the right hand part tone is assigned to the
keyboard.
You can load song data from an external device and increase
the selection of songs available on the keyboard. See the
following pages for more information. See page EN-54 for
details about how to transfer sampled data to a computer for
storage.
For information about how to delete song data loaded from
an external device, see page EN-42.
You can use the following procedure to play back user song
data (page EN-54) directly from a USB flash drive.
Whenever you copy a file to the USB flash drive that
you plan to play on the Digital Keyboard, be sure to
store the file in the MUSICDAT folder on the USB flash
drive.
1.
Insert the USB flash drive into the Digital
Keyboard’s USB flash drive port.
Never plug any other device besides a USB flash drive
into the USB flash drive port.
When you perform a USB flash drive operation or turn
on the Digital Keyboard while a USB flash drive is
plugged in, the Digital Keyboard initially needs to
perform a “mounting” sequence to prepare for data
exchange with the USB flash drive. Digital Keyboard
operations may be momentarily disabled while a
mounting sequence is being performed. While the
mounting process is in progress, the message
“Mounting” will be displayed. It may take up to 10 or 20
seconds or even longer for a USB flash drive to be
mounted. Do not attempt to perform any operation on
the Digital Keyboard while a mounting sequence is in
progress. A USB flash drive needs to be mounted each
time it is connected to the Digital Keyboard.
2.
Press bn SONG BANK.
3.
Use the ct number keys, and the dk [–] and [+]
keys to select the song you want to play.
Hold down bo CATEGORY as you use the dk [–] and
[+] keys to select the USB category.
4.
Press 8PLAY/STOP.
This will start playback.
Each press of 8PLAY/STOP starts and stops
playback.
Changing Playback Speed (Tempo)
Adjusting the Song Volume
Playing with the Tone as Song Playback
(Tone Sync)
Increasing the Selection of Songs
Playing Back Data from a USB
flash drive
CTX800-ES-1A.indd 23 2017/11/28 10:19:09
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Casio CT-X800 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Casio CT-X800 in the language / languages: English, Spanish as an attachment in your email.

The manual is 3,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Casio CT-X800

Casio CT-X800 User Manual - German - 74 pages

Casio CT-X800 User Manual - Dutch - 74 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info