723237
104
Zoom out
Zoom in
Previous page
1/157
Next page
EN-103
Using the MIDI Recorder to Record
You can quantize, key shift, delete, or perform other
operations in measure units for each track included in a
recorded song.
Quantize automatically corrects the timing of notes
recorded in a track to match a note value being used as the
quantize reference (note event note on timing).
Key shift offsets the pitch of recorded notes (note events) in
semitone steps.
In the procedure below, you specify a start measure (Point
A or simply Point), and an end measure (Point B). The
section specified by “Looping Playback of Specific Song
Measures (A-B Repeat)” (page EN-40) is used as the initial
default for this specification.
1.
Perform the procedure under “To enter the
Song Editing Mode” (page EN-99).
2.
Use the [1] (V) and [3] (W) bm number keys
to display “Trk Meas”, and then press [6]
(ENTER).
This displays “Quantize”.
3.
Press [6] (ENTER) again.
This displays “Trk Sy”
4.
Use bn [–] and [+] or the bl dial to specify the
target track, and then press [6] (ENTER).
This displays “Point A”.
5.
Use bn [–] and [+], or the bl dial to select the
number of the first measure of the range you
want to quantize, and then press [6] (ENTER).
This displays “Point B”.
6.
Use bn [–] and [+], or the bl dial to select the
number of the last measure of the range you
want to quantize, and then press [6] (ENTER).
This displays “Value”.
7.
Use bn [–] and [+] or the bl dial to specify the
note value to be used as the quantize reference
note.
8.
Press [6] (ENTER).
This displays “Sure?”
9.
Perform the procedure under “To exit the Song
Editing Mode operation” (page EN-99).
1.
Perform the procedure under “To enter the
Song Editing Mode” (page EN-99).
2.
Use the [1] (V) and [3] (W) bm number keys
to display “Trk Meas”, and then press [6]
(ENTER).
This displays “Quantize”.
3.
Use the [1] (V) and [3] (W) keys to display
“KeyShift”, and then press [6] (ENTER).
This displays “Trk Sy
4.
Use bn [–] and [+] or the bl dial to specify the
target track, and then press [6] (ENTER).
This displays “Point A”.
5.
Use bn [–] and [+], or the bl dial to select the
number of the first measure of the range you
want to key shift, and then press [6] (ENTER).
This displays “Point B”.
6.
Use bn [–] and [+], or the bl dial to select the
number of the last measure of the range you
want to key shift, and then press [6] (ENTER).
This displays “Value”.
7.
Use bn [–] and [+], or the bl dial to specify the
key shift setting value.
You can specify a value of the range of –24 to 24.
Lowering the setting value by one lowers the pitch by
one semitone, while raising the value raises the pitch.
8.
Press [6] (ENTER).
This displays “Sure?”
9.
Perform the procedure under “To exit the Song
Editing Mode operation” (page EN-99).
Editing a Track of a Recorded
Song in Measure Units
To quantize a specified track in measure
units
Display Description
4, 8, 16, 32 Quarter note, eighth note, sixteenth
note, thirty-second note
4d, 8d, 16d, 32d Dotted notes
4t, 8t, 16t, 32t Triplet notes
To key shift a specified track in measure
units
CTX5000_3000_EN.book 103 ページ 2018年2月26日 月曜日 午後3時56分
104


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Casio CT-X5000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Casio CT-X5000 in the language / languages: English, Spanish as an attachment in your email.

The manual is 12,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Casio CT-X5000

Casio CT-X5000 User Manual - German - 155 pages

Casio CT-X5000 User Manual - Dutch - 155 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info