723237
93
Zoom out
Zoom in
Previous page
1/157
Next page
Using the MIDI Recorder to Record
EN-92
The [RECORD] indicator will start to flash during recording
when the number of remaining note count is 100 or lower.
When there are no more remaining notes, recording stops
automatically and the [RECORD] indicator disappears.
To make a new recording by selecting the recording
destination song number first, see “To change the recording
destination song number during recording standby” (page
EN-95).
You can configure settings to sound a pre-count before
recording starts or the metronome while recording is in
progress. See “To sound a pre-count or the metronome”
(page EN-95).
You can exit recording standby at any time ([RECORD]
indicator flashing) by pressing 8 RECORD/STOP once
or twice so the [RECORD] indicator is not displayed.
1.
Press 6 RHYTHM.
2.
Specify the tempo to use at the start of
recording.
See “Changing Auto Accompaniment Speed (Tempo)”
(page EN-46).
3.
Select the rhythm and tone you want to use at
the start of recording.
See “Selecting a Rhythm” (page EN-43) and
“Selecting a Tone” (page EN-18).
If you want to change mixer settings of each of the
system track parts, perform the procedure under “To
configure mixer settings” (page EN-64). Configure the
mixer settings of each part of the KEYBOARD part
group.
Layer and split settings, as well as other settings are
also recorded. For details about recorded data, see
“Recording Track and Recorded Data” (page EN-90).
4.
Press 8 RECORD/STOP.
This enters recording standby.
The [SONG] and [SYSTEM] indicators are also
displayed at this time, and the mixer part indicators
( to ) all start to flash. This indicates that the
system track is the recording target.
5.
Playing on the keyboard automatically starts
recording.
Pressing ck START/STOP starts the rhythm and
recording at the same time.
While recording is in progress, the number of
measures since recording started is indicated in the
upper right corner of the display.
6.
When you are finished recording, press
8 RECORD/STOP.
This causes the [RECORD] indicator to disappear.
Pressing ck PLAY/STOP will play back the recorded
data.
Recording using the above operation automatically selects
the lowest song number (31 to 40) that does not have
anything recorded to it yet as the recording destination.
Recording Keyboard Play
To record a new system track
Flashing
Displayed
Displayed
Measure Beat
CTX5000_3000_EN.book 92 ページ 2018年2月26日 月曜日 午後3時56分
93


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Casio CT-X5000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Casio CT-X5000 in the language / languages: English, Spanish as an attachment in your email.

The manual is 12,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Casio CT-X5000

Casio CT-X5000 User Manual - German - 155 pages

Casio CT-X5000 User Manual - Dutch - 155 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info