723237
22
Zoom out
Zoom in
Previous page
1/157
Next page
EN-21
Playing on the Keyboard
1.
Perform steps 1 through 3 under “To split the
keyboard between two tones (Split)” (page
EN-19).
2.
Perform the procedure below to layer two
UPPER part tones.
(1) Press dq UPPER LAYER and confirm that the [U2]
indicator is displayed.
(2) Select the tone you want to assign to UPPER 2.
3.
Perform the procedure below to layer two
LOWER part tones.
(1) Long-press dq UPPER LAYER until the [L2]
indicator appears.
This displays an indicator mark next to [LOWER
LAYER].
(2) Select the tone you want to assign to LOWER 2.
4.
Play something on the keyboard.
For information about how to change the tone
assigned to each part, see “To change the tones
assigned to each split/layer part” (page EN-21).
When using split and layer together, the UPPER 2 part is
called the “upper layer”, while the LOWER 2 part is called
the “lower layer”.
To disable the upper layer only after performing steps 1
through 3 of the procedure above, press dq UPPER
LAYER and confirm that the [U2] indicator is not displayed.
To disable the lower layer only, long-press dq UPPER
LAYER (LOWER LAYER) until the [L2] indicator
disappears ([LOWER LAYER] indicator mark also
disappears).
There will be an indicator mark next to [LOWER LAYER]
while the lower layer is enabled, regardless of whether the
keyboard is split. The mark disappears when the lower
layer is disabled.
Pressing dp SPLIT after performing steps 1 through 3
above disables the split, so the [L1] and [L2] indicators
disappear, and the keyboard becomes layered with the
UPPER parts (UPPER 1 and UPPER 2) only.
1.
Press 5 TONE.
This displays (tone indicator).
2.
Long-press 5 TONE until moves to the
right of the keyboard part indicator (page
EN-19).
Repeat this operation as many times as required to
move to the right of the keyboard part indicator
(U1, U2, L1, L2) of the part (UPPER 1, LOWER 1,
UPPER 2, LOWER 2) whose tone setting you want to
change.
3.
Change the tone of the keyboard part you
selected in step 2.
Repeat steps 2 and 3 above for each of the keyboard
parts whose tone setting you want to change.
To use split and layer together
Displayed
To change the tones assigned to each split/
layer part
CTX5000_3000_EN.book 21 ページ 2018年2月26日 月曜日 午後3時56分
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Casio CT-X5000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Casio CT-X5000 in the language / languages: English, Spanish as an attachment in your email.

The manual is 12,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Casio CT-X5000

Casio CT-X5000 User Manual - German - 155 pages

Casio CT-X5000 User Manual - Dutch - 155 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info