723237
14
Zoom out
Zoom in
Previous page
1/157
Next page
EN-13
Connecting to Audio Equipment
Connection requires commercially available connecting cords,
supplied by you.
The connecting cords should have a stereo mini plug on
one end and a plug that matches the configuration of the
external device on the other end.
Turn off the Digital Keyboard when making
connections. After connecting, turn down the Digital
Keyboard and external device volume levels whenever
turning power on or off.
After connecting, turn on the external device and then
the Digital Keyboard.
If notes from an external device that are played on the
Digital Keyboard sound distorted, lower the volume
setting of the external device.
Enabling Vocal Cut cuts (mutes or minimizes) the vocal in the
sound being input from the AUDIO IN jack. Note that this
function cancels the sound in the center position of the audio,
which may (depending on how the original audio was mixed)
end up canceling something else other than the vocal part.
How vocal cut is performed depends on the sound being
input.
Perform the procedure under “To configure function settings
with the bk FUNCTION button” (page EN-112) and configure
the following setting: Other (Other) 3 Audio In Center Cancel
(AIn CCan) (page EN-117).
Digital Keyboard built-in effects (reverb, chorus, delay,
DSP) are not applied to AUDIO IN jack input.
You can connect a commercially available microphone* to the
MIC IN jack and output the sound from the microphone
through the Digital Keyboard’s speakers.
* Use a dynamic microphone.
You can adjust the volume level of microphone input with
fm MIC VOLUME. Microphone volume control is
independent from overall keyboard volume.
Before connecting a microphone, make sure that the
Digital Keyboard and microphone are turned off.
Before connecting, set both 2 VOLUME and fm MIC
VOLUME to low levels. Adjust volume settings to
appropriate levels after connecting the microphone.
Microphone input is disabled during demo play.
You can use the Mixer to make individual adjustments to the
reverb, chorus, and delay effects that are applied to
microphone input.
See “Using the Mixer” (page EN-64).
Playing an External Device from
the Digital Keyboard
Center Cancel (Vocal Cut)
Stereo mini plug
fn AUDIO IN jack (Stereo mini jack (3.5mm))
Portable audio player, etc.
CT-X5000: Outputting Sound from
a Microphone
Microphone Settings
fl MIC IN jack (Standard jack (6.3mm))
fm MIC VOLUME knob
CTX5000_3000_EN.book 13 ページ 2018年2月26日 月曜日 午後3時56分
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Casio CT-X5000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Casio CT-X5000 in the language / languages: English, Spanish as an attachment in your email.

The manual is 12,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Casio CT-X5000

Casio CT-X5000 User Manual - German - 155 pages

Casio CT-X5000 User Manual - Dutch - 155 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info