723287
25
Zoom out
Zoom in
Previous page
1/80
Next page
Sampling Sounds and Playing Them on the Digital Piano
EN-23
You can use the procedures in this section to copy the drum
sound assigned to one keyboard key to another key, to
change the pitch of a sound, and to delete a sampled sound.
1.
Press
bp
(TONE) and then use
br
(10-key) to
enter the tone number (706, 707, or 708) for the
drum set you want.
2.
Hold down
bk
until the SAMPLING indicator
starts to flash.
3.
Press
ck
(FUNCTION).
This is the editing mode.
While in the editing mode, you can copy a sound,
change the pitch of a sound, or delete a sound (each of
which is described below). Pressing
ck
(FUNCTION)
again exits the editing mode and returns to step 2 of
this procedure.
To copy a sampled sound from one key to
another
While holding down the keyboard key to which the sampled
sound you want to copy is assigned, press the keyboard key
to which you want to copy it.
A keyboard key that already has a sampled sound assigned
cannot be selected as a copy destination.
To change the pitch of a sampled sound
While holding down the keyboard key of the sampled sound
whose pitch you want to change, use the
br
(10-key) [–] and
[+] keys to change the pitch.
You can change the pitch within a range of –64 to 63
semitones.
To delete a keyboard key’s sampled sound
While holding down the keyboard key whose sound you want
to delete, press
bo
(RHYTHM). In response to the “DelSure?”
message that appears, press the
br
(10-key) [+] (YES) key to
delete, or [–] (NO) to cancel the delete operation.
Deleting a sampled sound will return the key to its initial
default built-in sound.
Use the following procedure to change the rhythm part of an
Auto Accompaniment pattern to a drum set sound that you
sampled.
1.
Press
bo
(RHYTHM) and then use
br
(10-key)
to enter the rhythm number of the Auto
Accompaniment pattern you want.
You cannot use a Drum Sampling Tone in a user rhythm,
so do not select a user rhythm in the above step.
2.
Press
bp
(TONE) and then use
br
(10-key) to
enter the tone number of the sampling drum set
that contains the sound you want to use.
3.
Press
bp
(TONE).
This changes the rhythm part of the Auto Accompaniment
pattern you selected in step 1 to the sampled sound you
selected in step 2.
To change the Auto Accompaniment rhythm part back
to its original sound, press
bp
(TONE) again.
Some rhythm part drum sounds cannot be replaced by
sampled sounds.
Editing Sampled Drum Set Sounds
Example: To copy sampled sound of key C3 to key D3
Flashes
Sm
p
lDrm1
Flashes at high
speed
Indicates keyboard keys that have sounds assigned.
Indicates the keyboard key whose sound was copied.
Example: To delete the sound assigned to key D3
Using a Drum Sampling Tone in Auto
Accompaniment (Drum Assign)
Disappears
CDP235R_e.book 23 ページ 2017年2月9日 木曜日 午後4時32分
25


Need help? Post your question in this forum.

Forumrules
1

Forum

casio-cdp-235r

Reset search

  • Require information regarding S235 keyboard
    I need to know what batteries to use Submitted on 9-2-2023 at 11:26

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Casio CDP-235R at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Casio CDP-235R in the language / languages: English, Spanish as an attachment in your email.

The manual is 4,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info