Manual Casio AQ-S800W (page 2 of 6) (English)

576297

Zoom out

Zoom in

1/6

Operation Guide 5208

E-10

• All of the operations in this section are performed in the Timekeeping Mode, which

you can enter by pressing C (page E-8).

Timekeeping

Use the Timekeeping Mode to set and view the current time and date.

• When setting the time, you can also configure settings for the 12/24-hour format.

• Each press of D cycles the digital display in the sequence shown below.

Day

Day of week

▲

PM indicator

Hour : Minute

SecondSecond Second

Month

▲

E-11

City code

Setting the Digital Time and Date

Make sure you select your Home City code before you change the current time and

date settings. World Time Mode times are all displayed in accordance with the

Timekeeping Mode settings. Because of this, World Time Mode times will not be

correct if you do not select the proper Home City code before setting the time and

date in the Timekeeping Mode.

To set the current digital time and date

1. In the Timekeeping Mode, hold down A for about two

seconds, until “ADJ” appears on the display.

• Your current Home City code will be flashing on the

screen.

2. Press C to move the flashing in the sequence shown

below to select other settings.

E-12

3. While the setting you want to change is flashing, use D and B to change it as

explained below.

Screen: To do this:

Change the city code

Toggle between Daylight Saving Time

(ON) and Standard Time (OFF).

Toggle between 12-hour (12H) and

24-hour (24H) timekeeping

Reset the seconds to 00

Do this:

Press D (east) and B (west).

Press D.

City Code

Language

Illumination

Duration

Day Month Ye a r

DST

12/24-Hour

Format

Seconds Hour Minutes

Button Operation

To ne

E-13

To do this:

Change the hour or minutes

Change the year

Change the month or day

Toggle the button operation tone

between (on) and (off)

Toggle the illumination duration between

LT1 (approximately 1.5 seconds) and

LT3 (approximately 3 seconds).

Change the day of the week language

ENG: English POR: Portuguese

ESP: Spanish FRA: French

DEU: German ITA : Italian

Screen:

Do this:

Use D (+) and B (–).

Press D.

Use D (+) and B (–).

• See “City Code Table” at the back of this manual for a complete list of available

city codes.

E-14

4. Press A to exit the setting screen.

• The day of the week is automatically displayed in accordance with the date (year,

month, and day) settings.

12-hour and 24-hour timekeeping

• With the 12-hour format, the P (PM) indicator appears to the left of the hour digits for

times in the range of noon to 11:59 p.m. and no indicator appears for times in the

range of midnight to 11:59 a.m.

• With the 24-hour format, times are displayed in the range of 0:00 to 23:59, without

any indicator.

• The 12-hour/24-hour timekeeping format you select in the Timekeeping Mode is

applied in all other modes.

Daylight Saving Time (DST)

Daylight Saving Time (summer time) advances the time setting by one hour from

Standard Time. Remember that not all countries or even local areas use Daylight

Saving Time.

E-15

To change the Daylight Saving Time (summer time) setting

1. In the Timekeeping Mode, hold down A for about two seconds, until “ADJ” appears

on the display.

• Your current Home City code will be flashing on the screen.

2. Press C once to display the DST setting screen.

3. Press D to toggle between Daylight Saving Time (ON displayed) and Standard

Time (OFF displayed).

4. When the setting you want is selected, press A to exit the setting screen.

• The DST indicator appears on the display to indicate that Daylight Saving Time is

turned on.

E-16

Analog Timekeeping

The analog time of this watch is synchronized with the digital time. The analog time

setting is adjusted automatically whenever you change the digital time.

Note

• The hands for the analog timepiece move to adjust to a new setting whenever any of

the following occurs.

When you change the digital time setting

When you change the Home City code and/or DST setting

• If the analog time does not match the digital time for any reason, use the procedure

described under “To adjust home positions” (page E-42) to match the analog setting

to the digital setting.

• Whenever you need to adjust both the digital and the analog time settings, make

sure you adjust the digital setting first.

• Depending on how much the hands have to move in order to synchronize to the

digital time, it may take some time before they stop moving.

E-17

World Time

The World Time Mode digitally displays the current time in

48 cities (31 time zones) around the world.

• If the current time shown for a city is wrong, check your

Home City time settings and make the necessary

changes (page E-11).

• After you press C to enter the World Time Mode, your

currently selected World Time City code will appear on

the digital display for about two seconds. After that, the

current time in that city will appear.

• All of the operations in this section are performed in the

World Time Mode, which you enter by pressing C

(page E-9).

City code

Current time in

selected city

E-18

To view the time in another city

If you press D while in the World Time Mode, your currently selected World Time City

code will appear on the digital display for about two seconds. After that, the current

time in that city will appear. Pressing D again while the World Time City code is

displayed will scroll to the next city code.

• For full information on city codes, see the “City Code Table” at the back of this

manual.

To toggle a city code time between Standard Time and Daylight Saving Time

1. In the World Time Mode, use D to display the city code

(time zone) whose Standard Time/Daylight Saving Time

setting you want to change.

2. Hold down A to toggle Daylight Saving Time (DST

indicator displayed) and Standard Time (DST indicator

not displayed).

• The DST indicator will appear on the display whenever

you display a city code for which Daylight Saving Time is

turned on.

DST indicator

E-19

• Note that the DST/Standard Time setting affects only the currently displayed city

code. Other city codes are not affected.

Swapping your Home City and World Time City

You can use the procedure below to swap your Home City and World Time City. This

changes your Home City to your World Time City, and your World Time City to your

Home City. This capability can come in handy when you frequently travel between two

cities in different time zones.

To swap your Home City and World Time City

1. In the World Time Mode, use D to select the World Time City you want.

2. Hold down A and B until the watch beeps.

• This will make the World Time City you selected in step 1 your Home City, and cause

the hour and minute hands to move to the current time in that city. At the same time,

it will change the Home City you had selected prior to step 2 your World Time City.

• After swapping the Home City and World Time City, the watch stays in the World

Time Mode with the city that was selected as the Home City prior to step 2 now

displayed as the World Time City.

casio aq-s800w
digital/analog Anzeige synchronisiert nicht mehr ? Submitted on 9-9-2022 at 14:51
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Casio AQ-S800W in the language / languages: English as an attachment in your email.

The manual is 0,45 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Casio AQ-S800W

Casio AQ-S800W User Manual - German - 6 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Casio AQ-S800W Manual

Product: