723284
8
Zoom out
Zoom in
Previous page
1/77
Next page
EN-6
Power Outlet
After you finish assembling the stand, turn on the
Digital Piano. For details, see “Getting Ready” on page
EN-55.
1.
Press the 1P (Power) button to turn on
Digital Piano power.
This causes the 1P (Power) button to light.
If you press 1P (Power) button only lightly, the
display will light up momentarily but power will not
turn on. This does not indicate malfunction. Press
1P (Power) button firmly and completely to turn
on power.
2.
To turn off the Digital Piano, hold down the
1P (Power) button until its light goes out.
You can configure the Digital Piano to save its setup
when power is turned off. For details, see
“Configuring Digital Piano Settings” on page EN-38,
and “General” 3 “Auto Resume” in the “Parameter
List” on page EN-42.
Pressing the 1P (Power) button to turn off power
actually puts the Digital Piano into a standby state.
Minute amounts of current continue to flow within the
Digital Piano in the standby state. If you do not plan
to use the Digital Piano for a long time or if there is a
lightning storm in your area, be sure to unplug the
AC adaptor from the power outlet.
The message “Please Wait...” will remain on the
display while a data save operation is in progress.
Do not perform any other operation while it is
displayed. Turning off the Digital Piano can cause
Digital Piano data to be deleted or become
corrupted.
This Digital Piano is designed to turn off automatically
to avoid wasting power after no operation is
performed for a preset amount of time. The Auto
Power Off trigger time is about four hours.
You also can use the procedure below to temporarily
suspend Auto Power Off.
To disable Auto Power Off
1.
Press the 3SETTING button to display the
setting screen.
2.
Use the clw and q arrow buttons to
select “General” and then press the
cmENTER button.
3.
Use the clw and q arrow buttons to
select “Auto Power Off”.
4.
Use the clu and i arrow buttons to select
“Off”.
5.
Press the 3SETTING button to exit the
setting screen.
To re-enable Auto Power Off, perform the above
procedure and select “On” in step 4.
1.
Use the 2VOLUME controller to adjust the
volume.
Your Digital Piano has a Volume Sync Equalizer
feature that automatically enhances tone quality in
accordance with the volume level. This feature
ensures that low range and/or high range sounds
are easier to hear, even at low volume levels. For
details, see “General”3”Volume Sync EQ” in the
“Parameter List” (page EN-39).
Turning Power On or Off
Auto Power Off
Adjusting the Volume Level
G e n e r a l > E n t
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Casio AP-710 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Casio AP-710 in the language / languages: English, Spanish as an attachment in your email.

The manual is 1,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Casio AP-710

Casio AP-710 User Manual - German - 77 pages

Casio AP-710 User Manual - Dutch - 77 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info