723285
65
Zoom out
Zoom in
Previous page
1/76
Next page
EN-64
Troubleshooting
Problem Cause Action See
Page
No sound is produced
when I press a keyboard
key.
1. The 2VOLUME controller is set
to “MIN”.
1. Rotate the 2VOLUME controller more
towards “MAX”.
) EN-6
2. Headphones or an adaptor plug is
plugged into one of the PHONES
jacks.
2. Disconnect whatever is connected to the
PHONES jacks.
) EN-62
3. MIDI Local control is turned off. 3. Turn on the Local control setting. ) EN-43
The pitch of the Digital
Piano is off.
1. Digital Piano tuning is incorrect. 1. Adjust Digital Piano tuning, or turn the
Digital Piano off and then back on again.
) EN-40
2. The Digital Piano’s key setting is
something other than “440.0Hz”.
2. Change the key setting to “440.0Hz”, or
turn Digital Piano power off and then back
on again.
) EN-40
3. Octave shift is enabled. 3. Change the octave shift setting to 0. ) EN-22
4. A non-standard temperament
setting is being used.
4. Change the temperament setting to
“00: Equal”, which is the standard modern
tuning.
) EN-22
Nothing happens when I
press a pedal.
1. The pedal unit cable is not
connected.
1. Connect the cable correctly. ) EN-58
2. The pedal unit cable plug is not
plugged in completely.
2. Make sure that the pedal unit cable plug is
inserted as far as it will go into the pedal
connector on the bottom of the Digital
Piano.
Tones and/or effects sound
strange. Turning power off
and then back on again
does not eliminate the
problem.
Example:
Note intensity
does not change even
though I alter key pressure.
The “Auto Resume” feature is turned
on.
Turn off “Auto Resume”. Next, turn power off
and then back on again.
) EN-42
I cannot transfer data after
connecting the Digital
Piano to a computer.
1. Check to make sure that the USB cable is
connected to the Digital Piano and
computer, and that the correct device is
selected with your computer’s music
software.
) EN-53
2. Turn off the Digital Piano and then exit the
music software on your computer. Next,
turn the Digital Piano back on and then
restart the music software on your
computer.
I cannot store data to a USB
flash drive or load data
from a USB flash drive.
See “Error Indicators”. ) EN-52
It takes a long time before I
can use the Digital Piano
after I turn it on.
Digital Piano memory data was
corrupted because a data transfer
operation with a computer was in
progress the last time you turned off
the Digital Piano. When this
happens, the Digital Piano performs
a memory format operation the next
time you turn it on. You cannot
perform any other operation while a
format operation is in progress.
It takes about 20 seconds after you turn on
power to perform the memory format
operation. Wait until the format operation is
complete. Note that you should take care to
avoid turning off the Digital Piano while a data
transfer operation with a computer is in
progress.
) EN-53
AP700-ES-1B.indd 66 2015/04/06 12:23:06
65


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Casio AP-700 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Casio AP-700 in the language / languages: English, Spanish as an attachment in your email.

The manual is 2,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Casio AP-700

Casio AP-700 User Manual - German - 76 pages

Casio AP-700 User Manual - Dutch - 76 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info