466796
42
Zoom out
Zoom in
Previous page
1/79
Next page
E-38
Recording Your Keyboard Play
3.
Press the (START/STOP) button.
This will start playback of the selected track.
4.
When playback reaches the point you want to
re-record, play the notes and perform the
other operations you want.
This automatically starts punch-in recording, which
will continue until step 5, below.
Any one of the following also will start punch-in
recording: a pedal operation; pressing the
(RECORDER) button;*1 changing the tone setting;
changing the rhythm or tempo setting*2.
You can perform (REW), (FF), and (PAUSE)
button operations during punch-in playback to jump
more quickly to the section you want to re-record.
5.
To stop punch-in recording, press the
(START/STOP) button again.
Anything in the track following the point where you
pressed the (START/STOP) button will be retained
as-is.
If you want to delete all of the data in the track
following the section you re-recorded with punch-in
recording, press the (RECORDER) button in place
of the (START/STOP) button above.
If you want to cancel punch-in recording and retain
the original (unedited) track data, hold down the
(RECORDER) button until the display exits the
punch-in recording screen.
Specifying the Punch-in Recording
Location (Auto Punch-in Recording)
You can use the following procedure to specify a
particular range for punch-in recording.
1.
Turn on the recorder, enter the record mode,
and display the recording setup screen.
While holding down the  (FUNCTION) button,
press the (RECORDER) button.
2.
Use the

(
u
) and

(
i
) buttons to display
“AutoPu.IN”, and then use the

(
w
,
q
)
buttons to select the start measure.
3.
Use the  (u) and  (i) buttons to
display “AutoPu.OUT”, and then use the 
(w, q) buttons to select the end measure.
After selecting the start and end measures, press the
 (EXIT) button to exit the recording setup screen.
4.
Select the track that contains the range of
measures you want to re-record.
See step 3 under “Recording to a Specific Track
(Part)” (page E-35).
5.
Hold down the (RECORDER) button until
the punch-in recording screen appears on the
display.
6.
Press the  (q) button to turn on auto
punch-in recording.
7.
Press the (START/STOP) button to start
playback.
Punch in recording will start from the start measure
and stop with the end measure automatically.
8.
Play the notes and perform the other
operations you want.
*1 Press (RECORDER) when you want to start
punch-in recording without note input or a setting
change.
*2 System track only
Start measure End measure
Punch-in recording range
42


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Casio AP-620 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Casio AP-620 in the language / languages: English as an attachment in your email.

The manual is 1,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Casio AP-620

Casio AP-620 User Manual - German - 77 pages

Casio AP-620 User Manual - Dutch - 77 pages

Casio AP-620 User Manual - Dutch - 77 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info