Manual Casio AP-620 (page 33 of 79) (English)

466796

Zoom out

Zoom in

1/79

English

Music Presets

E-29

■To edit the chord progression

On the editing operation selection screen

(page E-27), select “CHORD” and then press

the  (ENTER) button to display the chord

progression editing screen shown below.

Use the  (REW) and  (FF) buttons to

move the cursor (2) on the chord progression

editing screen to the step you want to select.

Change the content of the selected step as

desired.

(1) Step (timing and chord)

The timing of a chord progression is expressed as a

series of three values separated by colons (such as

001:1:00) indicating measure*1 (001), beat (1), and

tick (00).*2 This series of three values is referred to

collectively as a “step”.

The screen shot above shows the first two steps

(001, 002) of the Music Preset. Use the  (REW) and

 (FF) buttons to scroll and view other steps.

*1 Up to 999 measures

*2 There are 12 ticks per beat, as shown below.

(2) Cursor

Specifies the step that is currently selected for

editing.

(3) Resolution

Resolution is a unit used when editing step timing.

The initial resolution is R1 (one measure), but you

also can select R4 (1 beat = 4 quarter notes) when

you want to specify chords for each beat. Use the

instrument part buttons ( through ) to select

one of the eight resolutions shown below.

(3) Resolution(2) Cursor (1) Step (timing and chord)

01 02 09 10 1100

Chord progression

Measure 1

Beat 1 Beat 2 Beat 3 Beat 4 Beat 1 Beat 2

Tick

001:1:00

002:1:00

For the sample display

above, the chord change

from C to Bm occurs here.

Measure 2

3 3 3

R1 R2 R4 R8 R8T R16 R16T R32T

ck cl cm cn co cp cq cr

(1 measure) (2 beats) (1 beat) (1/2 beat) (1/3 beat) (1/4 beat) (1/6 beat) (1/12 beat)

3-1.Select a chord fingering mode and use the

chord keyboard (page E-18) to input chords.

Fingering a chord causes the cursor (2) to

move to the next step automatically.

•If you want to advance to the next step

without changing the current chord, press

the  (PAUSE) button.

•If (3) Resolution is shorter than the time up

to the next step, a new step (without chord)

that is equal to the time of the resolution

will be inserted temporarily into the Music

Preset. Fingering a chord for the new step

will cause the step to be registered as part

of the Music Preset, and the cursor will

advance to the next step.* You can use this

operation to insert a new step between the

current and following step.

*Using the  (REW) and  (FF) buttons to

move the cursor without inputting a chord

will delete the temporarily inserted step.

3-2.Use the  (w, q) buttons to change the

step timing (measure:beat:tick).

Each press of either button changing the

timing in accordance with the resolution.

•The range of values you can specify for the

step timing is limited by the steps before

and after the current step.

•The timing of the first step (001:1:00) is

fixed and cannot be changed. Also, the final

step is always one measure, regardless of

the resolution.

3-3.To delete a step, press both of the  (w and

q) buttons at the same time.

•You cannot delete the first step or the last

step.

Last step

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Casio AP-620 in the language / languages: English as an attachment in your email.

The manual is 1,6 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Casio AP-620

Casio AP-620 User Manual - German - 77 pages

Casio AP-620 User Manual - Dutch - 77 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Casio AP-620 Manual

Product: