Manual Casio AP-450 Celviano (page 48 of 55) (English)

522433

Zoom out

Zoom in

1/55

E-46

Reference

Troubleshooting

Problem Cause Action See

Page

No sound is produced when I

press a keyboard key.

1. The VOLUME controller is set to

“MIN”.

1. Rotate the VOLUME controller more towards

“MAX”.

) E-6

2. Headphones or an adaptor plug is

plugged into one of the PHONES

jacks.

2. Disconnect whatever is connected to the

PHONES jacks.

) E-44

3. MIDI Local control is turned off. 3. Turn on the Local control setting. ) E-24

The pitch of the digital piano

is off.

1. The digital piano’s key setting is

something other than “440.0Hz”.

1. Change the key setting to “440.0Hz”, or turn

digital piano power off and then back on

again.

) E-24

2. Digital piano tuning is incorrect. 2. Adjust digital piano tuning, or turn the digital

piano off and then back on again.

) E-24

3. Octave shift is enabled. 3. Change the octave shift setting to 0. ) E-24

4. A non-standard temperament

setting is being used.

4. Change the temperament setting to

“00: Equal”, which is the standard modern

tuning.

) E-24

Nothing happens when I

press a pedal.

The pedal unit cable is not connected. Connect the cable correctly. ) E-41

Tones and/or effects sound

strange. Turning power off

and then back on again does

not eliminate the problem.

Example:

Note intensity does

not change even though I

alter key pressure.

The “Back up” feature is turned on. Turn off “Back up”. Next, turn power off and then

back on again.

) E-25

I cannot transfer data after

connecting the digital piano

to a computer.

– 1. Check to make sure that the USB cable is

connected to the digital piano and computer,

and that the correct device is selected with

your computer’s music software.

) E-35

2. Turn off the digital piano and then exit the

music software on your computer. Next, turn

the digital piano back on and then restart the

music software on your computer.

I cannot store data to a USB

flash drive or load data from a

USB flash drive.

– See “Error Indicators”. ) E-33

It takes a long time before I

can use the Digital Piano after

I turn it on.

Digital Piano memory data was

corrupted because a data transfer

operation with a computer was in

progress the last time you turned off

the piano. When this happens, the

Digital Piano performs a memory

format operation the next time you turn

it on. You cannot perform any other

operation while a format operation is in

progress.

It takes about 20 seconds after you turn on

power to perform the memory format operation.

Wait until the format operation is complete. Note

that you should take care to avoid turning off the

Digital Piano while a data transfer operation with

a computer is in progress.

) E-36

A tone’s quality and volume

sounds slightly different

depending where it is played

on the keyboard.

This is an unavoidable result of the digital sampling process,* and does not indicate malfunction.

*Multiple digital samples are taken for the low range, middle range, and high range of the original

musical instrument. Because of this, there may be very slight differences in tonal quality and

volume between sample ranges.

When I press a button, the

note that is sounding cuts out

momentarily or there is a

slight change in how effects

are applied.

This happens when the sounds of multiple parts are sounding at the same time while using layer,

using the Duet Mode, playing back a built-in tune, recording, etc. Pressing a button when one of

these conditions exists will cause the effect setting that is built into the tone to change automatically,

which causes notes to cut out momentarily or causes a slight change in how effects are being

applied.

AP450_e.book 46 ページ２０１２年６月２０日　水曜日　午前１１時１１分

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Casio AP-450 Celviano in the language / languages: English as an attachment in your email.

The manual is 4,09 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Casio AP-450 Celviano

Casio AP-450 Celviano User Manual - German - 55 pages

Casio AP-450 Celviano User Manual - Dutch - 55 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Casio AP-450 Celviano Manual

Product: