Manual Casio 5470 - PRX-8000 (page 12 of 26) (English)

624835

Zoom out

Zoom in

1/26

Note

●

The second hand will point to r

(over) if the current altitude

differential

is greater than the setting

value, or s (under) if it is lower than

the setting value.

If either of these is indicated while

using the ±100 m (328 feet)

measurement range, change the

range setting to ±1000 m (3280

feet).

●

The second hand will move to 9

o’clock if a reading is outside the

allowable altitude measurement

range

(-700 m to 10,000 m (-2,300 to

32,800 feet)), or if a reading error

occurs.

Setting the Auto

Measurement Interval

You can select an auto measurement interval

of either five seconds or two minutes.

Pull out the crown.

Press (B).

Crown

Rotate the crown to select [0’05] or [2’00]

as the auto measurement interval.

[0’05]: Readings taken every second for

the

first three minutes, and then every five

seconds for about the next one hour.

[2’00]: Readings taken every second for

the

first three minutes, and then every two

minutes for about the next 12 hours.

Push the crown back in to complete the

setting operation.

Note

●

The watch will automatically return

to the Timekeeping Mode if you do

not perform any operation in the

Altimeter Mode for about one hour

while [0’05] is selected as the

measurement interval or about 12

hours while [2’00] is selected.

Recording Altitude Readings

Use the procedure below to record altitude

measurements manually. Auto

measurements are also recorded

automatically.

●

Use the Altitude Record Recall Mode to

view or delete records.

Viewing Altitude Records

●

Recording Altitude Data Manually

Hold down the (A) button for about two

seconds, until [REC] stops flashing on the

display. This records the current altitude

reading, along with the recording date and

time.

●

There is enough memory to hold up to 30

altitude records.

●

Recording altitude data when there are

already

30 records in memory automatically

deletes the oldest record to make room for

the new one.

●

Auto Altitude Data Recording

The altitude data described below is recorded

automatically while the watch is in the Altitude

Mode. One record each is maintained in

memory for each of these items.

End point

Start point

High Altitude (MAX): E

Low Altitude (MIN): F

Cumulative Ascent (ASC): A+C

Cumulative Descent (DSC): B+D

* Cumulative ascent and cumulative descent

values are updated whenever there is a

difference of at least ±15 m (±49 feet) from

one reading to the next.

Note

●

Auto recording ends when you exit

the

Altimeter Mode. Re-entering the

Altimeter Mode restarts recording of

cumulative values from where it was

stopped when you last exited the

Altimeter Mode.

Specifying the Altitude

Measurement Unit

You can select either meters (m) or feet (ft) as

the Altitude Mode display unit.

Important!

●

When Tokyo (TYO) is set as the

Home City, the altitude unit is fixed

as meters (m) and cannot be

changed.

Pull out the crown.

Press (B) three times.

Crown

Rotate the crown to select meters (m) or

feet (ft) as the measurement unit.

Push the crown back in to complete the

setting operation.

Operation Guide 5470

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Casio 5470 - PRX-8000 in the language / languages: English as an attachment in your email.

The manual is 1,51 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Casio 5470 - PRX-8000

Casio 5470 - PRX-8000 User Manual - German - 26 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Casio 5470 - PRX-8000 Manual

Product: