624479

Casio 5463 - GWG-1000 Manual

11
Zoom out
Zoom in
Previous page
1/15
Next page
E-80
Viewing Altitude Records
You can use the Data Recall Mode to view manually saved record data and auto save values.
To view altitude records
1. Use
B
to select the Data Recall Mode (
RECALL
) as shown on page E-30.
• About one second after RECALL appears on the display, the display will change to show the fi rst
record of the memory area you were viewing when you last exited the Data Recall Mode.
2. Use
A
and
C
to scroll through the screens for an area and display the one you want.
E-81
Manual Save 1 Manual Save 30
High Altitude (MAX)
2 seconds
2 seconds
High altitude
2 seconds
2 seconds
2 seconds
Altitude
Hour : Minutes
2 seconds
Altitude
Record name
Year
Month
Day
Cumulative
Descent (DSC)
Cumulative
Ascent (ASC)
Low Altitude (MIN)
Cumulative recording start
date (year, month, day)
Cumulative recording start
date (year, month, day)
2 seconds
2 seconds
2 seconds
2 seconds
Cumulative descent Cumulative ascent
Low altitude
E-82
• Manually saved records (REC01 to REC30) and auto save MAX and MIN values all include the
date (year, month and day) and time (hour and minute) that the data was recorded.
• Records of the ASC and DSC include altitude values along with the date (year, month, day) that
the data was recorded.
• For details about auto save values, see “Auto Save Values” (page E-62).
• ---- will be displayed if MAX/MIN data has been deleted or if there is no corresponding MAX/MIN
data due to error, etc. In such cases, total ascent (ASC) and total descent (DSC) values will show
zero.
• When the total ascent (ASC) or total descent (DSC) exceeds
99,999 meters (or 327,995 feet), the applicable value will restart
from zero.
10,000s digit
1s digit
10,000s digit
1s digit
E-83
To delete all recorded data
1. Use
B
to enter the Data Recall Mode.
2. Hold down
D
for at least three seconds. Keep
D
depressed when
CLEAR ALL
starts to fl ash on the
display, and release it when
CLEAR ALL
stops fl ashing (and remains displayed).
• - : - - and -.- - will alternate on the display.
To delete a specifi c record
1. Use
B
to enter the Data Recall Mode.
2.
A
and
C
to display the record you want to delete.
Important!
• Note that holding down
D
for more than fi ve seconds in step 3 will delete all data.
• A delete operation cannot be undone! Make sure you do not need data before you delete it.
3. Hold down
D
. Keep
D
depressed when
CLEAR
starts to fl ash on the display, and release it as soon
as
CLEAR
stops fl ashing (and remains displayed).
• Deleting a record in the manually saved record memory area causes all of the records following it
to be shifted upwards and renumbered accordingly.
E-84
Using the Stopwatch
The stopwatch measures elapsed time, split times, and two fi nishes.
To enter the Stopwatch Mode
Use
B
to select the Stopwatch Mode (
STW
) as shown on page E-30.
To perform an elapsed time operation
A
A
A A
C
Start Stop (Resume) (Stop) Reset
To pause at a split time
A
C
C A
C
Start Split
(
SP
appears on
the digital
display.)
Split release Stop Reset
Current time
Hours
Seconds
Minutes
1/100 second
Current time
Hours
Seconds
Minutes
1/100 second
E-85
To measure two fi nishes
A
C
A C
C
Start Split
First runner fi nishes.
(
SP
appears on the
digital display.)
Display time of fi rst
runner
Stop
Second runner
fi nishes.
Split release
Display time of
second runner
Reset
Note
• The Stopwatch Mode can indicate elapsed time up to 23 hours, 59 minutes, 59.99 seconds.
• An ongoing elapsed time measurement operation will continue internally even if you change to another
mode. However, if you exit the Stopwatch Mode while a split time is displayed, the split time will not be
displayed when you return to the Stopwatch Mode.
E-86
Using the Countdown Timer
The countdown timer can be confi gured to start at a preset time, and sound an alarm when the end of the
countdown is reached.
To enter the Countdown Timer Mode
Use
B
to select the Countdown Timer Mode (
TIMER
) as shown on page
E-30.
• About one second after
TIMER
appears on the display, the display will
change to show the countdown time hours.
To specify the countdown start time
1. Enter the Countdown Timer Mode.
2. Pull out the crown.
• This will cause the current start time minutes digits to fl ash on the
digital display.
3. Rotate the crown to adjust the minutes setting.
• To set a starting countdown time of 60 minutes, set 00’00.
4. After the setting is the way you want, push the crown back in.
Countdown time
(Minutes, seconds)
Current time
Countdown time
(Minutes, seconds)
Current time
E-87
To perform a countdown timer operation
A
A
A A
C
Start Stop (Resume) (Stop) Reset
• An alarm sounds for ten seconds when the end of the countdown is reached. This alarm will sound in
all modes. The countdown time is reset to its starting value automatically when the alarm sounds.
To stop the alarm
Press any button.
Operation Guide 5463
… 11 …


Need help? Post your question in this forum.

Forumrules
1

Forum

casio-5463---gwg-1000

Reset search

  • hi can you sent an receive whats-app messengers from Casio 5463 gwg 1000 or can you just get notifications from whats- apps Submitted on 16-9-2019 at 12:45

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Casio 5463 - GWG-1000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Casio 5463 - GWG-1000 in the language / languages: English as an attachment in your email.

The manual is 2,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Casio 5463 - GWG-1000

Casio 5463 - GWG-1000 User Manual - German - 15 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info