624830
6
Zoom out
Zoom in
Previous page
1/13
Next page
Leap seconds
A GPS signal received on or around June 1 or
December 1 each year may also include leap
second information.
Note
The receive operation can take as
long as 13 minutes when leap
second information is included.
Once leap second information is
successfully
received, the watch will
not make any attempt to receive it
again until the next leap second
information is sent (the following
June 1 or December 1).
Time Adjustment Using a
Time Calibration Signal
Appropriate Signal Reception
Location
A time calibration signal can be received while
the watch is near a window.
Keep metal objects away from the watch.
Do not move the watch.
Do
not perform any operation on the watch.
6 o’clock position
Note
You
may experience time calibration
signal reception problems in the
areas described below.
Among or near buildings
While riding in a vehicle
Near household appliances,
office machines, mobile phones,
etc.
On a construction site, in an
airport, or any other location
where radio wave interference
occurs
Near high-voltage lines
In mountainous areas or behind a
mountain
Time Calibration Signal Reception
Ranges
Time calibration signal reception is supported
in the areas shown below.
Japan Time Calibration Signal (JJY)
500 kilometers
500 kilometers
1,000 kilometers
1,000 kilometers
To k y o
Fukushima
Fukuoka/
Saga
Chinese Time Calibration Signal (BPC)
500 kilometers
1,500 kilometers
Chengdu
Shangqiu
Hong Kong
Shanghai
Beijing
Changchun
U.S. Time Calibration Signal (WWVB)
600 miles
(1,000 kilometers)
2,000 miles (3,000 kilometers)
Los Angeles
Denver
Fort Collins
Chicago
New York
U.K. (MSF) and German (DCF77) Time
Calibration Signal
The Anthorn signal is receivable within this area.
500 kilometers
1,500 kilometers
Mainflingen
Anthorn
Note
Even if you are within the normal
reception
range of a time calibration
signal, reception may be made
impossible by the following factors:
geographic contours, weather, the
season, the time of day, wireless
noise.
Auto Time Calibration Signal
Receive
An automatic time calibration signal receive
operation is performed and the time and day
settings are adjusted between midnight and
5:00 a.m. Once a signal receive operation is
successful, no more auto receive operations
are performed that day.
The receive operation is performed only while
the
watch is in the Timekeeping Mode (normal
timekeeping).
Normally the mode hand points to the
current day of the week.
l Navigating Between Modes
30
Mode
hand
Place the watch near a window or some other
location appropriate for signal reception.
The second hand points to “RC” while time
calibration reception in progress.
When the receive operation is successful,
the time and day settings will be adjusted
automatically.
Note
Reception takes anywhere from
about two minutes to about 10
minutes. It can take as long as 20
minutes.
Operation Guide 5454
6
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Casio 5454 - OCW-G1100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Casio 5454 - OCW-G1100 in the language / languages: English as an attachment in your email.

The manual is 1,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Casio 5454 - OCW-G1100

Casio 5454 - OCW-G1100 User Manual - German - 13 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info