Manual Casio 5445 - GST-S110 (page 5 of 8) (English)

624811

Zoom out

Zoom in

1/8

Operation Guide 5445

E-49

Alarm Countdown

When the current time reaches one hour before an alarm

time setting, the alarm on/off indicator (in the lower digital

dial) will ﬂ ash and a countdown of the ﬁ nal 60minutes

will be displayed in the right digital dial while the watch is

in the Timekeeping Mode.

Note

x Pressing A while an alarm countdown is in progress

will display the day of the week in the right digital dial for

about two seconds. After that, the dial will return to the

countdown.

x When you enter the Timekeeping Mode from another mode while an alarm

countdown is in progress, the day of the week will appear in the right digital dial for

two seconds. After that, the countdown will appear.

x If an alarm countdown for another alarm starts while a previous alarm countdown is

already in progress, it will be displayed after the ongoing countdown reaches zero

and its alarm sounds.

Alarm ON/OFF indicator

Alarm Countdown

E-48

To turn an alarm and the Hourly Time Signal on and off

1. In the Alarm Mode, use D to scroll through the alarm

indicators (AL1 to AL5, SIG) in the right digital dial until

the one you want is displayed.

2. When the alarm or the Hourly Time Signal you want is

selected, press A to toggle it between on and off.

x The alarm on indicator (when any alarm is on) and the

Hourly Time Signal on indicator (when the Hourly Time

Signal is on) are displayed in all modes.

To stop the alarm

Press any button.

Hourly Time Signal

on indicator

E-47

4. While a setting is ﬂ ashing, use D (+) and B (–) to change it.

x When setting the alarm time using the 12-hour format, take care to set the time

correctly as a.m. (no indicator) or p.m. (PM indicator).

5. Press A to exit the setting mode.

x Exiting a setting mode will normally cause the hands to return to regular

timekeeping automatically. However, if you manually move the hands (page

E-61) and then enter a setting mode, they will not return to regular timekeeping

automatically when you exit the setting mode. In this case, you will need to

return the hands to their normal positions manually (page E-62).

To test the alarm

In the Alarm Mode, hold down D to sound the alarm.

E-46

To set an alarm time

1. In the Alarm Mode, use D to scroll through the alarm

indicators (AL1 to AL5, SIG) in the right digital dial until

the one whose time you want to set is displayed.

AL1 AL3 AL5AL2 AL4 SIG

DDDDD

2. Hold down A for about two seconds until the alarm time starts to ﬂ ash. This is

the setting mode.

x Whenever you enter the setting mode, the analog hands will automatically move

to positions that allow easier viewing of the digital dials.

3. Press C to move the ﬂ ashing between the hour and minute settings.

Alarm ON/OFF indicator

E-45

Using the Alarm

You can set ﬁ ve independent daily alarms. When a daily

alarm is turned on, an alarm tone will sound for about

10 seconds each day when the time in the Timekeeping

Mode reaches the preset alarm time. This is true even if

the watch is not in the Timekeeping Mode.

You can also turn on an Hourly Time Signal, which will

cause the watch to beep twice every hour on the hour.

To enter the Alarm Mode

Use C to select the Alarm Mode as shown on page E-23.

x The right digital dial will show ALM for about one

second and then the indictor for the currently selected

alarm (AL1 through AL5, or SIG) will appear.

x When you enter the Alarm Mode, the data you were

viewing when you last exited the mode appears ﬁ rst.

Alarm number

Alarm time (Hour : Minutes)

E-44

To perform a countdown timer operation

D D D A

Start Stop Resume (Stop) Reset

x Before starting a countdown timer operation, check to make sure that a

countdown operation is not in progress (indicated by the seconds counting down).

If it is, press D to stop it and then A to reset to the countdown start time.

x An alarm sounds for 10seconds when the end of the countdown is reached. This

alarm will sound in all modes. The countdown time is reset to its starting value

automatically when the alarm sounds.

To stop the alarm

Press any button.

E-43

2. Hold down A until the minute setting of the current countdown start time starts

to ﬂ ash. This is the setting mode.

x Whenever you enter a setting mode, the analog hands will automatically move to

positions that allow easier viewing of the digital dials.

3. Press C to move the ﬂ ashing between the minute and second settings.

4. Use D (+) and B (–) to change the ﬂ ashing item.

x To set the starting value of the countdown time to 100minutes, set 00'00".

5. Press A to exit the setting mode.

x Exiting a setting mode will normally cause the hands to return to regular

timekeeping automatically. However, if you manually move the hands (page

E-61) and then enter a setting mode, they will not return to regular timekeeping

automatically when you exit the setting mode. In this case, you will need to

return the hands to their normal positions manually (page E-62).

E-42

Using the Countdown Timer

The countdown timer can be set within a range of one minute to 100minutes. An

alarm sounds when the countdown reaches zero.

To enter the Countdown Timer Mode

Use C to select the Countdown Timer Mode (TMR) as

shown on page E-23.

To specify the countdown start time

1. Enter the Countdown Timer Mode.

x If a countdown is in progress (indicated by the

seconds counting down in the left digital dial), press

D to stop it and then press A to reset to the current

countdown start time.

x If a countdown is paused, press A to reset to the

current countdown start time.

Countdown time

(Minutes, seconds)

E-41

Note

x The Stopwatch Mode can indicate elapsed time up to 59minutes, 59.99seconds.

x An ongoing elapsed time measurement operation will continue internally even if

you change to another mode. However, if you exit the Stopwatch Mode while a

split time is displayed, the split time will not be displayed when you return to the

Stopwatch Mode.

E-40

To perform an elapsed time operation

D D D A

Start Stop Resume (Stop) Reset

To pause at a split time

A A D A

Start Split

(SPL displayed)

Split release Stop Reset

To measure two ﬁ nishes

A D A A

Start Split

(SPL displayed)

First runner ﬁ nishes.

Display time of ﬁ rst

runner.

Stop

Second runner

ﬁ nishes.

Split release

Display time of

second runner.

Reset

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Casio 5445 - GST-S110 in the language / languages: English as an attachment in your email.

The manual is 0,36 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Casio 5445 - GST-S110 Manual

Product: