624485
7
Zoom out
Zoom in
Previous page
1/10
Next page
E-48
3. Hold down
A
for at least two seconds.
This will cause the hour digits of the high tide time to ash.
If you are using 12-hour timekeeping, the P (p.m.) indicator will
also appear on the display.
4. Use
E
(+) and
B
(−) to change the hour setting.
Holding down
E
or
B
scrolls the hour at high speed.
Any time during steps 4 through 6, you can discard your changes
and return to the high tide time for the date that was previously
selected by pressing
B
and
E
at the same time.
If there are two high tides on a date, set the time of the fi rst high
tide. The watch will automatically calculate the time of the second
one.
If summer time is turned on for your Home Time (DST displayed),
you should also use summer time when setting the high tide time
(page E-16).
5. Press
D
.
6. Use
E
(+) and
B
(−) to change the minute setting.
Holding down
E
or
B
scrolls the minutes at high speed.
7. Press
A
.
The Tide Screen reappears after calibration is complete.
Performing the above procedure allows the Tide Graph hand to
indicate more accurate tide information.
Hour : MinutesHour : Minutes
E-49
Tide Graph, Moon Graph, and Moon Age information you can view in the Tide/Moon Data Mode
changes in accordance with the date you specify in step 2 of the above procedure. If you want to
view the tide level, Moon phase, and Moon age information for a particular date, go back to step 2
and specify the date.
The calibration setting you make with this procedure is also applied to Tide Graph information
indicated in other modes besides the Tide/Moon Data Mode.
Northern Hemisphere View or Southern Hemisphere View Moon Phase
You can select either of the settings below.
Northern hemisphere view (Moon to the south)
Southern hemisphere view (Moon to the north)
To specify Northern Hemisphere View or Southern Hemisphere View Moon Phase
1. In the Tide/Moon Data Mode, hold down
A
for at least two seconds.
This displays the high tide time adjustment screen with the hour fl ashing
High tide time (hour: minute)
E-50
2. Press
D
twice.
This displays a screen for selecting Northern Hemisphere view or Southern Hemisphere view for
the Moon phase.
3. Press
E
to toggle between Northern Hemisphere view and Southern Hemisphere view.
[N S]: Northern Hemisphere
view (Moon to the south)
[N S]: Southern Hemisphere
view (Moon to the north)
4. Press
A
to exit the setting screen.
E-51
Checking the Current Time in a Different Time Zone
You can use the World Time Mode to view the current time in one of 29 time zones (29 cities) around the
globe. The city that is currently selected in the World Time Mode is called the “World Time City”.
You also can swap the current World Time City and Home Time City in the World Time Mode (page
E-53).
To enter the World Time Mode
Use
D
to select the World Time Mode as shown on page E-9.
The mode dial hand will point to
WT
.
The current time (hour, minute) of the selected World Time City will
appear on the display.
The second hand points to the city code of the current World Time City
and the display shows the seconds. The hour hand and minute hand
show the current time in the Home Time City.
World Time City city code
World Time City hour
and minute
P (p.m) indicator
of the World Time
Seconds
World Time City city code
World Time City hour
and minute
P (p.m) indicator
of the World Time
Seconds
E-52
To confi gure World Time City and summer time settings
1. In the World Time Mode, use
E
(East) to scroll through city codes.
For details about city codes, see the “City Code Table” at the back of this manual.
Pressing down
B
and
E
at the same time will jump to the UTC city code.
2. To toggle between summer time (
DST
displayed) and standard time (
DST
not displayed), hold down
A
.
DST indicator
Hold down A
Using the World Time Mode to change the DST setting of the city code that is selected as your
Home City also will change the Timekeeping Mode time DST setting.
Note that you cannot switch between standard time/daylight saving time (DST) while UTC is
selected as the World Time City.
Note that the standard time/daylight saving time (DST) setting affects only the currently selected
city code. Other city codes are not affected.
E-53
Swapping the Home City and World Time City
You can use the procedure below to swap your Home Time City with your World Time City.
This function comes in handy for those who often travel between two different time zones.
You need to confi gure starting Home City and World Time City settings before performing the
procedure below.
To confi gure Home City settings (page E-15)
To confi gure World Time City and summer time settings (page E-52)
To swap your Home Time and World Time Cities
Press
A
and
B
at the same time.
This causes the Home City time (indicated by the main hour and minute hands) and the World Time
City time (shown on the display) to be swapped with each other.
$ and %
New World Time
City and Time
Home City [NYC] Time
Current World Time
City and Time
Home City [TYO] Time
E-54
Using the Stopwatch
The stopwatch measures elapsed time, split times, and two fi nishes.
To enter the Stopwatch Mode
Use
D
to select the Stopwatch Mode as shown on page E-8.
The mode dial hand will move to
STW
.
To perform an elapsed time operation
E
E
E E
A
Start Stop (Resume) (Stop) Reset
To pause at a split time
E
A
A E
A
Start Split
(
SPL
appears on
the display.)
Split release Stop Reset
Seconds
Minutes
1/100 second
Seconds
Minutes
1/100 second
E-55
To measure two fi nishes
E
A
E A
A
Start Split
First runner fi nishes.
(
SPL
appears on the
display.)
Display time of fi rst
runner
Stop
Second runner
nishes.
Split release
Display time of
second runner
Reset
Note
The Stopwatch Mode can indicate elapsed time up to 59 minutes, 59.99 seconds.
Elapsed time returns to zero automatically and timing continues from there when the above elapsed
time limit is reached.
Once started, elapsed time measurement continues until you press the
E
button to stop it, even if you
navigate to a different mode and even if the stopwatch reaches the elapsed time measurement limit.
Exiting the Stopwatch Mode while a split time is frozen on the display clears the split time.
Operation Guide 5442 5443
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Casio 5442 - GN-1000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Casio 5442 - GN-1000 in the language / languages: English as an attachment in your email.

The manual is 1,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Casio 5442 - GN-1000

Casio 5442 - GN-1000 User Manual - German - 10 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info