685952

Casio 5441 Manual

3
Zoom out
Zoom in
Previous page
1/8
Next page
E-16
Confi guring Current Time and Date Settings
You can use the procedure below to adjust the Timekeeping Mode time and date settings if they are off.
Changing the digital Home City data should cause the analog time setting to change accordingly. If the
analog time does not indicate the digital time, check the home positions of the hands and make
adjustments if necessary (page E-19).
To change the current time and date settings
1. In the Timekeeping Mode, hold down
A
until
ADJ
appears in the
upper display.
• When you release
A
(after ADJ appears), city code will be fl ashing
in the upper display.
City codeCity code
E-17
2. Press
D
to move the fl ashing in the sequence shown below to select the other settings.
City Code DST
Illumination
Duration
Button Operation
Tone On/Off
Day Month
12/24-Hour
Format
Seconds Hour
Year
Minutes
• The following steps explain how to confi gure timekeeping settings only.
3. When the timekeeping setting you want to change is fl ashing, use
E
and/or
B
to change it as
described below.
Screen To do this: Do this:
Change the city code Use
E
(East) and
B
(West).
Toggle between daylight saving time (
ON
) and
standard time (
OFF
).
Press
E
.
Toggle between 12-hour (
12H
) and 24-hour (
24H
)
timekeeping.
Press
E
.
Reset the seconds to
00
(If the current seconds count is between 30 and 59,
one is added to the minute count).
Press
E
.
Change the hour or minutes
Use
E
(+) and
B
(–).
Change the year, month, or day
E-18
4. After all of the settings are the way you want, press
A
to exit the setting screen.
Note
• For information about selecting a Home City and confi guring the DST setting, see “Confi guring
Home City Settings” (page E-14).
• While the 12-hour format is selected for timekeeping, a P (PM) indicator will appear for times from
noon to 11:59 p.m. No indicator appears for times from midnight to 11:59 a.m. With 24-hour format,
time is displayed from 0:00 to 23:59, without any P (PM) indicator.
• The watch’s built-in full automatic calendar makes allowances for different month lengths and leap
years. Once you set the date, there should be no reason to change it except after you have the
watch’s battery replaced.
• The day of the week changes automatically as the date and/or year changes. Make sure that your
date and year settings are correct.
• Refer to the pages shown below for more information on Timekeeping Mode settings.
- Button operation tone on/off: “To enable or disable the button operation tone” (page E-49)
- Illumination duration setting: “To change the illumination duration” (page E-45)
E-19
Hand Home Position Adjustment
Strong magnetism or impact can cause the hands of the watch to be off.
• Home position adjustment is not necessary when the analog time and digital time are the same time in
the Timekeeping Mode.
To adjust home positions
1. In the Timekeeping Mode, hold down
A
and keep it depressed for
about fi ve seconds until
H.SET
appears on the upper display.
• When you release
A
after H.SET appears, the second hand will
move to 12 o’clock. This indicates the second hand home position
adjustment mode.
• Though ADJ will appear in the upper display about two seconds
after you hold down
A
, do not release the button yet. Keep it
depressed until H.SET appears.
• Home position adjustment is performed in the following sequence:
second hand, current time hour and minute hand, World Time hour
and minute hand, mode hand.
2. Use
D
to select the hand (s) you want to adjust.
• The selected hand (s) will move to 12 o’clock, and the upper display and lower display will show
the information below.
Upper display Lower display Selected hand
H.SET
Flashing
00
Second hand
Flashing
0:00
Not displayed Hour and minute hands
Flashing
SUB
Flashing
1
World Time hour and minute hands
Flashing
SUB
Flashing
2
Mode dial hand
E-20
• If the selected hand does not move exactly to 12 o’clock, perform step 3 below to adjust it.
• The watch will return to regular timekeeping automatically if you do not perform any operation for
about two or three minutes. Any changes you have made to settings up to that point will be saved.
3. Use
E
(+) and
B
(–) to adjust the position of the currently selected hand.
• Holding down either button will cause the hand to move at high speed. Once started, high-speed
hand movement will continue even if you release the button. To stop high-speed hand movement,
press any button.
• The second hand and mode dial hand will automatically stop high-speed movement after they
complete one revolution. The minute hand will stop automatically after 12 revolutions.
4. Press
A
to exit home position correction and return to regular timekeeping.
Note
After performing home position adjustment, check to make sure that the analog hands and the upper
display indicate the same time. If they do not, perform home position adjustment again.
E-21
Using the Digital Compass
You can use the Digital Compass Mode to determine the direction of north, and to check your bearing to a
destination.
• For information about what you can do to improve digital compass reading accuracy, see “Calibrating
the Bearing Sensor” (page E-24) and “Digital Compass Precautions” (page E-29).
To perform a digital compass operation
1. Place the watch on a fl at surface. If you are wearing the watch, make sure that your wrist is horizontal
(in relation to the horizon).
2. Point the 12 o’clock position of the watch in the direction you want to check.
3. In any mode (except a setting mode), press
C
to perform a digital compass operation.
• This will cause the mode dial hand to move to COMP.
• After about two seconds, the second hand will point in the direction of magnetic north, and the
upper display will show the direction or the bearing angle that 12 o’clock is pointed.
• Press
A
to toggle the upper display between the direction and the bearing angle.
E-22
315°
0°
Objective Bearing Indication
Meaning
N: North
E: East
W: West
S: South
Bearing to Objective:
Northwest
Bearing Angle to
Objective
North
• See “Digital Compass Readings” (page E-23) for information about how direction readings are
indicated by the watch.
4. To return to the mode you were in immediately before entering the Digital Compass Mode, press
D
.
To enter the Timekeeping Mode, hold down
D
for at least two seconds.
E-23
Digital Compass Readings
• After the fi rst reading is obtained, the watch will continue to take digital compass readings automatically
for about one minute. After readings are complete, the watch will return to the mode you were in
immediately before entering the Digital Compass Mode.
• The auto light switch is disabled while a Digital Compass reading operation is in progress.
• The following table shows the meanings of each of the direction abbreviations that appear on the upper
display.
Direction Meaning Direction Meaning Direction Meaning Direction Meaning
N
North
NNE
North-
northeast
NE
Northeast
ENE
East-
northeast
E
East
ESE
East-
southeast
SE
Southeast
SSE
South-
southeast
S
South
SSW
South-
southwest
SW
Southwest
WSW
West-
southwest
W
West
WNW
West-
northwest
NW
Northwest
NNW
North-
northwest
• The margin of error for the angle value and the direction indicator is ±15 degrees while the watch is
horizontal (in relation to the horizon). If the indicated direction is northwest (
NW
) and 315 degrees, for
example, the actual direction can be anywhere from 300 to 330 degrees.
• Note that performing a digital compass operation while the watch is not horizontal (in relation to the
horizon) can result in large error.
• You can calibrate the bearing sensor if you suspect the direction reading is incorrect.
Operation Guide 5441
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Casio 5441 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Casio 5441 in the language / languages: English as an attachment in your email.

The manual is 0,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info