624490
12
Zoom out
Zoom in
Previous page
1/18
Next page
Specifying the Light Duration
You can select either 1.5 seconds or
three seconds as the illumination
duration.
1. Press (C) to enter to the Timekeeping
Mode.
l Navigating Between Modes
2. Hold down the (A) button for about
two seconds.
[SET Hold] will appear, and then the
time zone setting will flash.
Time zone
3. Press (C) 10 times until the current
setting ([LT1] or [LT3]) flashes on the
display.
4. Rotate the rotary switch to display
the light duration you want to use.
[LT1]: 1.5-second light
[LT3]: 3-second light
Rotary
switch
5. Press (A) to exit the setting screen.
Hand Alignment Correction
Strong magnetism or impact can cause
the time indicated by the analog hands to
become different from the time on the
digital display. If this happens, correct the
hand position.
Getting ready
Perform this procedure in the
Timekeeping Mode. Use (C) to navigate
to the Timekeeping Mode.
l Navigating Between Modes
Timekeeping Mode
Adjusting Hand Alignment
1. Hold down the (A) button for about
five seconds.
[H.SET Hold] will appear, and then
[Sub] will flash.
Rotary
switch
Disk pointer
2. If the disk pointer is not at 12 o’clock,
rotate the rotary switch to move it
there.
Rotating the rotary switch quickly
three times starts high-speed
forward operation.
3. Press (C).
This enables correction of hour and
minute hand alignment.
Pressing (C) again will return to
disk pointer correction.
Button and rotary switch operation
are disabled while the hands are
moving.
Minute hand
Hour hand
4. If the hour and minute hands are not
at 12 o’clock, rotate the rotary switch
to move it there.
5. Press (A) to return to the
Timekeeping Mode.
Basic Settings
Getting ready
Perform this procedure in the
Timekeeping Mode. Use (C) to navigate
to the Timekeeping Mode.
l Navigating Between Modes
Timekeeping Mode
Enabling the Button
Operation Tone
Use the procedure below to enable or
disable the button operation tone.
1. Hold down the (A) button for about
two seconds.
[SET Hold] will appear, and then the
time zone setting will flash.
Time zone
2. Press the (C) button 9 times until the
current setting ([KEY♪] or [MUTE])
will flash on the display.
3. Rotate the rotary switch to display
[KEY♪] or [MUTE].
[KEY♪]: Enables the operation tone.
[MUTE]: Displays the mute indicator
and disables the operation tone.
Rotary
switch
Mute indicator
4. Press (A) to exit the setting screen.
Operation Guide 5413
12
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Casio 5413 - GBA-400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Casio 5413 - GBA-400 in the language / languages: English as an attachment in your email.

The manual is 1,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Casio 5413 - GBA-400

Casio 5413 - GBA-400 User Manual - German - 18 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info