624480

Casio 5311 - GW-A1100 Manual

3
Zoom out
Zoom in
Previous page
1/11
Next page
Operation Guide 5311
E-29
Note
x To interrupt a receive operation and return to the Timekeeping Mode, press any
button.
To check the result of the latest receive operation
In the Timekeeping Mode, press B. The
x
Second
Hand will move to Y (YES) or N (NO) to indicate the last
calibration signal receive result.
x The
x
Second Hand will move to Y (YES) if the latest
receive operation was successful, or N (NO) if it was
not. After about 10 seconds, regular timekeeping will
resume.
x Press B to return to regular timekeeping. The watch will
also return to regular timekeeping if you do not perform
any operation for about 10 seconds.

@
E-28
To perform manual receive
1. In the Timekeeping Mode (page E-35), keep B depressed (for about two seconds) as
the
x
Second Hand goes through the following sequence.
x Moves to Y (YES) or N (NO) to indicate the last signal reception result, then to
R (READY).
2. The
x
Second Hand indicates the operations the watch is currently performing.
When the x
x
Second Hand is
pointed here:
It means this:
R (READY)
Watch is setting up for reception.
W (WORK) Reception is in progress.
x If signal reception is unstable, the x
x
Second Hand may
move between W (WORK) and R (READY).
x When the receive operation is successful, the watch
adjusts the time setting accordingly, and then resumes
regular timekeeping. It does not adjust the setting if the
operation failed.

@
E-27
3. What you should do next depends on whether you are using Auto Receive or
Manual Receive.
x Auto Receive: Leave the watch over night in the location you selected in step 2.
See “Auto Receive” on page E-27 for details.
x Manual Receive: Perform the operation under “To perform manual receive” on
page E-28.
Auto Receive
x With Auto Receive, the watch performs the receive operation each day
automatically up to six times (up to fi ve times for the Chinese calibration signal)
between the hours of midnight and 5 a.m. (according to the Timekeeping Mode
time). When any receive operation is successful, none of the other receive
operations for that day are performed.
x When a calibration time is reached, the watch will perform the receive operation
only if it is in the Timekeeping Mode. The receive operation is not performed if a
calibration time is reached while you are confi guring settings.
E-26
x Signal reception may be diffi cult or even impossible under the conditions
described below.
Inside or
among
buildings
Inside a
vehicle
Near
household
appliances,
offi ce
equipment,
or a mobile
phone
Near a
construction
site, airport,
or other
sources of
electrical
noise
Near
high-tension
power lines
Among
or behind
mountains
E-25
To get ready for a receive operation
1. Confi rm that the watch is in the Timekeeping Mode. If it isn’t, hold down C for at
least two seconds to enter the Timekeeping Mode.
2. Place the watch in a location where signal reception is good.
12 o’clock
or
x Position the watch as shown in the
nearby illustration, with 12 o’clock
pointed towards a window. Make
sure there are no metal objects
nearby.
x Signal reception normally is better
at night.
x The receive operation takes from
two to 10 minutes, but in some
cases it can take as long as
20 minutes. Take care that you do
not perform any button operation or
move the watch during this time.
E-24
x Signal reception may not be possible at the distances noted below during certain
times of the year or day. Radio interference may also cause problems with reception.
− Mainfl ingen (Germany) or Anthorn (England) transmitters: 500 kilometers
(310 miles)
− Fort Collins (United States) transmitter: 600 miles (1,000 kilometers)
− Fukushima or Fukuoka/Saga (Japan) transmitters: 500 kilometers (310 miles)
− Shangqiu (China) transmitter: 500 kilometers (310 miles)
x As of December 2012, China does not use Daylight Saving Time (DST). If China
does go to the Daylight Saving Time system in the future, some functions of this
watch may no longer operate correctly.
x Using this watch in a country covered by a time calibration signal that is different
from the countries it supports may result in incorrect time indication due to local
application of daylight saving time (summer time), etc.
E-23
Japanese Signals Chinese Signal
Fukushima
500 kilometers
Fukuoka/Saga
1,000 kilometers
1,500 kilometers
Changchun500 kilometers
Beijing
Shangqiu
Shanghai
Chengdu
Hong Kong
E-22
Approximate Reception Ranges
UK and German Signals North American Signal
Anthorn
500 kilometers
1,500 kilometers
Mainfl ingen
The Anthorn signal is receivable
within this area.
2,000 miles
(3,000 kilometers)
600 miles
(1,000 kilometers)
Fort Collins
E-21
If your Home City Code setting is this:
The watch can receive the signal from
the transmitter located here:
LON (LONDON), PAR (PARIS), ATH (ATHENS)
Anthorn (England), Mainfl ingen
(Germany)
HKG (HONG KONG) Shangqiu City (China)
TYO (TOKYO)
Fukushima (Japan), Fukuoka/Saga
(Japan)
HNL (HONOLULU), ANC (ANCHORAGE),
LAX (LOS ANGELES), DEN (DENVER), CHI
(CHICAGO), NYC (NEW YORK)
Fort Collins, Colorado (United States)
Important!
x The areas covered by HNL (HONOLULU) and ANC (ANCHORAGE) are quite far
from the calibration signal transmitters, so certain conditions may cause reception
problems.
E-20
Radio Controlled Atomic Timekeeping
This watch receives a time calibration signal and updates its time setting accordingly.
However, when using the watch outside of areas covered by time calibration signals,
you will have to adjust the settings manually as required. See “Confi guring Current
Time and Day Settings Manually” (page E-41) for more information.
This section explains how the watch updates its time settings when the city code
selected as the Home City is in Japan, North America, Europe, or China, and is one
that supports time calibration signal reception.
3 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Casio 5311 - GW-A1100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Casio 5311 - GW-A1100 in the language / languages: English as an attachment in your email.

The manual is 0,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Casio 5311 - GW-A1100

Casio 5311 - GW-A1100 User Manual - German - 11 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info