Manual Casio 3202 (page 5 of 5) (English)

522104

Zoom out

Zoom in

1/5

Operation Guide 3202

Troubleshooting

Time Setting

■

The current time setting is off by hours.

Your Home City setting may be wrong. Check your Home City setting and correct it, if

necessary.

■

The current time setting is off by one hour.

You may need to change your Home City’s standard time/daylight saving time (DST)

setting. Use the procedure under “To change the current time and date settings” to

change the standard time/daylight saving time (DST) setting.

Sensor modes

■

I can’t change the temperature, barometric pressure, and altitude units.

When TYO (Tokyo) is selected as the Home City, the altitude unit is set automatically

to meters (m), the barometric pressure unit to hectopascals (hPa), and the

temperature unit to Celsius (°C). These settings cannot be changed.

■

The battery indicator (

) appears while a sensor operation is being

performed.

The battery indicator appears in the upper left corner of the digital

display whenever there is not enough battery power available to

perform a sensor operation in the Barometer/Thermometer Mode

or Altimeter Mode. Sensor operation is disabled while the battery

indicator is displayed.

• Normal operation should return after battery power recovers.

■

“ERR” appears while a sensor operation is in progress.

Subjecting the watch to strong impact can cause sensor malfunction or improper

contact of internal circuitry. When this happens, ERR (error) will appear on the display

and sensor operations will be disabled.

Barometric

Pressure/Temperature

Measurement

Altitude

Measurement

•

ERR

appears while a measurement operation is being performed in a sensor mode,

restart the measurement. If

ERR

appears on the display again, it can mean there is

something wrong with the sensor.

•

Barometer/Thermometer Mode and Altimeter Mode sensor operations are disabled

whenever there is not enough battery power available to perform a sensor operation.

This is true regardless of the current battery level. In this case,

ERR

will appear on

the display. This does not indicate malfunction, and sensor operation should resume

once battery voltage returns to its normal level.

• If

ERR

keeps appearing during measurement, it could mean there is a problem with

the applicable sensor.

Whenever you have a sensor malfunction, take the watch to your original dealer or

nearest authorized CASIO distributor as soon as possible.

■

The barometric pressure differential pointer does not appear on the display

when I enter the Barometer/Thermometer Mode.

• This could indicate sensor error. Try using

to re-enter the Barometer/

Thermometer Mode.

•

The barometric pressure differential pointer is not displayed when the displayed current

barometric value is outside of the allowable measurement range (260 to 1,100 hPa).

World Time Mode

■

The time for my World Time City is off in the World Time Mode.

This could be due to incorrect switching between standard time and daylight saving

time. See “To specify standard time or daylight saving time (DST) for a city” for more

information.

Specifications

Accuracy at normal temperature: ±30 seconds a month

Timekeeping: Hour, minutes, seconds, p.m. (P), month, day, day of the week

Time format: 12-hour and 24-hour

Calendar system: Full Auto-calendar pre-programmed from the year 2000 to 2099

Other: Home City code (can be assigned one of 48 city codes); Standard Time /

Daylight Saving Time (summer time)

Altimeter:

Measurement range: –700 to 10,000 m (or –2,300 to 32,800 ft.) without reference

altitude

Display range: –10,000 to 10,000 m (or –32,800 to 32,800 ft.)

Negative values can be caused by readings produced based on a reference

altitude or due to atmospheric conditions.

Display unit: 5 m (or 20 ft.)

Measurement timing: 5-second interval for first 3 minutes followed by 2-minute

interval for next 10 hours

Other: Reference altitude setting

Barometer:

Measurement and display range:

260 to 1,100 hPa (or 7.65 to 32.45 inHg)

Display unit: 1 hPa (or 0.05 inHg)

Measurement timing: 5-second interval for first 3 minutes followed by 2-minute

interval for next 10 hours in the Barometer/Thermometer Mode

Other: Calibration; Barometric pressure differential pointer

Thermometer:

Measurement and display range: –10.0 to 60.0°C (or 14.0 to 140.0°F)

Display unit: 0.1°C (or 0.2°F)

Measurement timing: 5-second interval for first 3 minutes followed by 2-minute

interval for next 10 hours

Other: Calibration

Battery indicatorBattery indicator

Pressure Sensor Precision:

Conditions

(Altitude)

Altimeter Barometer

Fixed

temperature

0 to 6000 m

0 to 19680 ft.

± (altitude differential × 2%

+ 15 m) m

± (altitude differential × 2%

+ 50 ft.) ft.

± (pressure differential × 2%

+ 2 hPa) hPa

± (pressure differential × 2%

+ 0.059 inHg) inHg

6000 to 10000 m

19680 to 32800 ft.

± (altitude differential × 2%

+ 25 m) m

± (altitude differential × 2%

+ 90 ft.) ft.

Effect of

variable

temperature

0 to 6000 m

0 to 19680 ft.

± 50 m every 10°C

± 170 ft. every 50°F

± 5 hPa every 10°C

± 0.148 inHg every 50°F

6000 to 10000 m

19680 to 32800 ft.

± 70 m every 10°C

± 230 ft. every 50°F

• Values are guaranteed for a temperature range of –10°C to 40°C (14°F to 104°F).

• Precision is lessened by strong impact to either the watch or the sensor, and by

temperature extremes.

Temperature Sensor Precision:

±2°C (±3.6°F) in range of –10°C to 60°C (14.0°F to 140.0°F)

World Time: 48 cities (31 time zones)

Other: Daylight Saving Time/Standard Time

Stopwatch:

Measuring unit: 1/100 second

Measuring capacity: 23:59' 59.99"

Measuring modes: Elapsed time, split time, two finishes

Countdown Timer:

Measuring unit: 1 second

Countdown start time setting range: 1 minute to 24 hours (1-hour increments and

1-minute increments)

Alarms: 5 Daily alarms; Hourly time signal

Illumination: LED (Light-emitting diode); Selectable illumination duration

(approximately 1 second or 3 seconds)

Other: Low-temperature resistance (–10°C/14°F); Button operation tone on/off

Battery: One lithium battery (Type: CR2016)

Approximate battery operating time: 3 years under the following conditions:

• 1 illumination operation (1.5 seconds) per day

• 10 seconds of alarm operation per day

• 10 hours of altimeter measurement, once per month

Frequent use of illumination runs down the battery.

City Code Table

City

Code

City

UTC Offset/

GMT Differential

PPG Pago Pago –11

HNL Honolulu –10

ANC Anchorage –9

YVR Vancouver

–8

LAX Los Angeles

YEA Edmonton

–7

DEN Denver

MEX Mexico City

–6

CHI Chicago

NYC New York –5

SCL Santiago

–4

YHZ Halifax

YYT St. Johns –3.5

RIO Rio De Janeiro –3

FEN

Fernando de

Noronha

–2

RAI Praia –1

UTC

0LIS Lisbon

LON London

MAD Madrid

PAR Paris

ROM Rome

BER Berlin

STO Stockholm

ATH Athens

+2CAI Cairo

JRS Jerusalem

City

Code

City

UTC Offset/

GMT Differential

MOW Moscow

JED Jeddah

THR Tehran +3.5

DXB Dubai +4

KBL Kabul +4.5

KHI Karachi +5

DEL Delhi +5.5

KTM Kathmandu +5.75

DAC Dhaka +6

RGN Yangon +6.5

BKK Bangkok +7

SIN Singapore

HKG Hong Kong

BJS Beijing

TPE Taipei

SEL Seoul

TYO Tokyo

ADL Adelaide +9.5

GUM Guam

+10

SYD Sydney

NOU Noumea +11

WLG Wellington +12

• Based on data as of December 2009.

• The rules governing global times (GMT

differential and UTC offset) and

summer time are determined by each

individual country.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Casio 3202 in the language / languages: English as an attachment in your email.

The manual is 0,77 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Casio 3202

Casio 3202 User Manual - German - 5 pages

Casio 3202 User Manual - Dutch - 6 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Casio 3202 Manual

Product: