Manual Casio 3095 (page 3 of 5) (English)

522100

Zoom out

Zoom in

1/5

Operation Guide 3095

Using Auto-start

• If you use Auto-start to start a stopwatch operation, the watch will interpret the

beginning of the Auto-start countdown as the starting point of the elapsed time

operation and will start recording elapsed time record data from there.

• If you press B to stop the Auto-start countdown, all of the data in the elapsed time

record will show -- to indicate that no data was stored.

Recall Mode

You can use the Recall Mode to view the elapsed time record data (elapsed time, lap

times, split times, etc.) that you measure with the Stopwatch Mode.

• When you enter the Recall Mode, the newest elapsed time record appears first.

• All of the operations in this section are performed in the Recall Mode, which you

enter by pressing C.

To view elapsed time record data

1. Press C to enter the Recall Mode.

• The Best Lap screen of the newer record that currently is in memory will appear

first.

• Press A when you want to switch to the other (older) record. Each press of A

toggles between the two records.

• The data that appears on the Best Lap screen depends on whether you are

viewing the data of a completed elapsed time operation or an ongoing elapsed

time operation.

• In the case of a completed elapsed time operation, the Best Lap screen will

display information like that shown.

• If an elapsed time operation is in progress in the Stopwatch Mode, what is shown

for the time on the Best Lap screen will depend on whether you have the elapsed

time screen or lap time screen selected in the Stopwatch Mode. If you have the

Elapsed Time screen selected in the Stopwatch Mode, the elapsed time will

appear on the Best Lap screen. If you have the Lap Time screen selected, the

lap/split time will appear on the Best Lap screen.

2. When the Best Lap screen of the elapsed time record you want to view is

displayed, use D and B to scroll through the lap/split times in the record.

Press .

Final lap/split timeFirst lap/split timeBest Lap Screen

Elapsed time

Hours : Minutes

Best Lap

indicator

Lap time

Split time

Month/Day

Lap time Lap number

Timekeeping

Mode time

TR2 countdown time

(hours, minutes, seconds)

TR1 countdown time

(hours, minutes, seconds)

Countdown Timer

Your watch comes with two countdown timers named TR1

(Timer 1) and TR2 (Timer 2). The setting range for the

countdown timers is from one second to 99 hours, 59

minutes, 59 seconds. The TR2 countdown starts

automatically when the TR1 countdown reaches zero.

The countdown timers can be used for interval training

(for example, three minutes running with TR1, 1 minute

rest with TR2) or for timing an multi-period event (for

example, 45 minutes of play with TR1, 15 minutes rest

with TR2).

• The initial factory default settings are 10 minutes for

TR1 and 5 minutes for TR2.

• All of the operations in this section are performed in the

Countdown Timer Mode, which you enter by pressing

To configure countdown timer settings

1. In the Countdown Timer Mode, hold down A until the

hour setting of the TR1 countdown time starts to flash.

This is the setting screen.

2. Press C to move the flashing in the sequence shown

below to select other settings.

TR1

Hours

TR1

Minutes

TR1

Seconds

TR2

Seconds

TR2

Minutes

TR2

Hours

3. While a setting is flashing, use D (+) and B (–) to change it.

• Any timer whose start time is 0:00 00 will not be used during the countdown timer

operation.

4. Set the times of all of the timers that you want.

5. Press A to exit the setting screen.

To perform a countdown timer operation

In the Countdown Timer Mode, press D to start the TR1 countdown.

• When the TR1 countdown reaches zero, the TR2 countdown will start automatically.

• To pause the countdown timer that currently is counting down, press D. Press D

again to restart.

• If start time of a countdown timer is zero (0:00 00), that timer will be skipped.

• The watch will continue cycling the countdown automatically between TR1 and TR2

for five countdowns or until you stop the countdown by pressing D.

• When the countdown of either TR1 or TR2 reaches zero, a beeper sounds for about

10 seconds. If a countdown start time is 10 seconds or less, the beeper will sound

for only about one second when the end of the countdown is reached.

• Regardless of the start time for timer TR2, the beeper will sound for about 10

seconds when TR2 reaches the end of its fifth countdown.

• When Flash Alert is turned on, the red and green LEDs at the bottom of the display

will flash in time with the beeper that sounds when the TR1 or TR2 countdown

reaches zero.

• An ongoing countdown timer operation continues to be performed even if you exit

the Countdown Timer Mode.

• To stop a countdown timer operation, first press D to pause the countdown of the

current timer, and then press B. This will reset the countdown timers to their

starting times.

Timekeeping

Mode time

AM indicator

On/Off status

Alarm time

(Hour : Minutes)

Alarms

Your watch has five independent multi-function alarms.

You can set the hour and minute for the alarm time, and

you can select one of four repeat patterns (week day,

weekend, Daily, One-time). One of the alarms is a snooze

alarm.

You also can turn on an Hourly Time Signal that causes

the watch to beep twice every hour on the hour. You can

specify the Hourly Time Signal repeat pattern, and a start

time and end time.

• There are five alarm screens, each of which shows an

alarm name: AL1 to AL4, and SNZ. The Hourly Time

Signal is indicated by SIG.

• When you enter the Alarm Mode, the data you were

viewing when you last exited the mode appears first.

• All of the operations in this section are performed in the

Alarm Mode, which you enter by pressing C.

Repeat Patterns

You can select from among four repeat patterns for the multi-function alarms, and

three repeat patterns for the Hourly Time Signal.

To set an alarm time

1. In the Alarm Mode, use D to scroll through the alarm

screens until the one whose settings you want to

configure is displayed.

• Select alarm screen AL1 through AL4 to configure a

normal alarm. Select the SNZ alarm screen to

configure the snooze alarm.

• The snooze alarm repeats every five minutes.

2. After you select an alarm, hold down A until the hour

setting of the alarm time starts to flash, which indicates

the setting screen.

• This operation turns on the alarm automatically.

3. Press C to move the flashing in the sequence shown

below to select other settings.

Hour

(HR)

Minutes

(MIN)

Repeat Pattern

(REP)

4. While a setting is flashing, use D (+) and B (–) to change it.

• You can select any one of the four alarm repeat patterns described below.

To configure the alarm to sound:

Daily

Once on the specified date only

Daily on Saturday and Sunday

Daily from Monday through Friday

Select this setting:

DAILY

ONCE

wEND

wDAY

5. Press A to exit the setting screen.

• With the 12-hour format, set the time correctly as a.m. or p.m.

Alarm Operation

The alarm tone sounds at the preset time for 10 seconds, regardless of the mode the

watch is in. In the case of the snooze alarm, the alarm operation is performed a total

of seven times, every five minutes, until you turn the alarm off.

• Alarm and Hourly Time Signal operations are performed in accordance with the

Timekeeping Mode time.

• To stop the alarm tone after it starts to sound, press any button.

• When Flash Alert is turned on, the red and green LEDs at the bottom of the display

will flash in time with the alarm beeper.

• Performing any one of the following operations during a 5-minute interval between

snooze alarms cancels the current snooze alarm operation.

Displaying the Timekeeping Mode setting screen

Displaying the SNZ setting screen

To test the alarm

In the Alarm Mode, hold down D to sound the alarm.

To turn an alarm on and off

1. In the Alarm Mode, use D to select an alarm.

2. Press B to toggle it on (on) and off (OFF).

• Turning on an alarm (AL1 to AL4, or SNZ) displays the

alarm on indicator on its Alarm Mode screen.

• In all modes, the alarm on indicator is shown for any

alarm that currently is turned on.

• The alarm on indicator flashes while the alarm is

sounding.

• The snooze alarm indicator flashes while the snooze

alarm is sounding and during the 5-minute intervals

between alarms.

Snooze alarm

indicator

Alarm on indicator

On/Off status

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Casio 3095 in the language / languages: English as an attachment in your email.

The manual is 0,9 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Casio 3095

Casio 3095 User Manual - German - 5 pages

Casio 3095 User Manual - Dutch - 6 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Casio 3095 Manual

Product: