Manual Casals VD2000M (page 4 of 46) (English, German, French, Italian, Polish, Portuguese, Spanish)

799656

Zoom out

Zoom in

1/46

properly. Do not alter the plug. Do not use plug adap-

tors.

- Do not force the power cord. Never use the power

cord to lift up, carry or unplug the appliance.

- Do not wrap the power cord around the appliance.

- Do not clip or crease the power cord.

- Do not allow the power cord to hang or to come into

contact with the hot surfaces of the appliance.

- Check the state of the power cord. Damaged or tan-

gled cables increase the risk of electric shock.

- As an additional protection to the electrical supply

for the appliance, it is advisable to have a differential

current device with a maximum sensitivity of 30 mA.

Ask for advice from a competent installer.

- Do not touch the plug with wet hands.

- Do not use the appliance if the cable or plug is dam-

aged.

- If any of the appliance casings breaks, immediately

disconnect the appliance from the mains to prevent

the possibility of an electric shock.

- Do not use the appliance if it has fallen on the oor,

if there are visible signs of damage or if it has a leak.

- Keep the working area clean and well lit. Cluttered

and dark areas invite accidents.

- Use the appliance in a well ventilated area.

- If other gas or fuel appliances can be used at the

same time in the room where the appliance is to be

used, that room must be well ventilated.

- Do not use aerosols while the appliance is switched

on.

- Keep children and bystanders away when using this

appliance.

- Do not use the appliance in association with a pro-

grammer, timer or other device that automatically

switches it on.

- Do not use or store the appliance outdoors.

- Do not leave the appliance out in the rain or ex-

posed to moisture. If water gets into the appliance,

this will increase the risk of electric shock.

- CAUTION: Maintain the appliance dry.

- Do not use the appliance with damp hands or feet,

or when barefooted.

- Do not force the power cord. Never use the power

cord to lift up, carry or unplug the appliance.

- Do not use the appliance, in the case of persons

insensitive to heat (the appliance has heated sur-

faces).

- Do not touch the heated parts of the appliance, as it

may cause serious burns.

Use and care:

- Fully unroll the appliance’s power cable before each

use.

- Make sure that all the product’s packaging has been

removed.

- Ensure that the voltage indicated on the rating label

matches the mains voltage before plugging in the

appliance.

Use:

- Unroll the cable completely before plugging it in.

- Connect the appliance to the mains.

- To save energy only switch the power tool on when

using it.

Switching on:

- Press the On/Off Switch (4) to position I or II.

Switching off:

- Press the On/Off Switch (4) to position 0.

Setting the air ow and temperature:

With the On/Off Switch you can selector between

different temperatures and air ows combinations:

Setting ºC l/min

Position I 400 300

Position II 600 500

Removing the heat protection:

- The heat protection collar (2) can be removed when

working at hard-to-reach locations.

- CAUTION: Increased danger of burning exists when

working without the heat protection collar

- Unplug the appliance from the mains.

- Allow the hot air gun to cool down.

- Turn the heat protection collar (2) anticlockwise to

remove and in clockwise direction to mount again.

Placing Down the power tool (Fig C):

- To cool down the power tool place it down on the

standing surface (3)

Working Advice

- The ideal temperature must be obtained by

performing a test

- The distance between the nozzle and the workpiece is

dependant of the material to be processed.

Remove paint/dissolving adhesives

- Soften the paint using the hot air gun and remove

evenly with the scraper.

- Do not heat for too long since this will burn the paint.

Removing paints from windows

- Always use the glass protection nozzle (5).

- Do not use the appliance if its accessories are not

properly tted.

- Do not use the appliance if the on/off switch does not

work.

- Use the appliance handle/s, to catch it or move it.

- If you use the appliance in a bathroom or similar place,

unplug the appliance from the mains when it is not in

use, even if it is only for a short while, as proximity to wa-

ter involves a risk, even if the appliance is disconnected.

- Unplug the appliance from the mains before replacing

any accessory.

- Unplug the appliance from the mains when not in use

and before undertaking any cleaning task.

- This appliance is for household use.

- This appliance should be stored out of reach of children

and/or the disabled.

- Do not store or transport the appliance if it is still hot.

- Use the appliance and its accessories and tools in ac-

cordance with these instructions, taking into account the

working conditions and the work to be performed. Use

the appliance for operations different from those intend-

ed could result in a hazardous situation.

- Is recommended use safety gloves

- Never leave the appliance unattended while in use.

- Do not use the appliance on any part of the body of a

person or animal.

- Do not use the appliance with pets or animals.

- Do not use the appliance to dry textiles of any kind.

Service

-Have your power tool serviced by a qualied repair

person using only identical replacement parts. This

will ensure that the safety of the power tool is maintained

-Any misuse or failure to follow the instructions for use

renders the guarantee and the manufacturer’s liability

null and void.

Description (g. A, B, C)

1 Nozzle

2 Heat protection collar

3 Standing surface

4 On/Off Switch

5 Glass protection Nozzle

6- Reector Nozzle

7- Scrapper Nozzle

8- Reducer Nozzle

Instructions for use

Before use:

- Unplug the appliance from the mains.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Casals VD2000M in the language / languages: English, German, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 1.42 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Casals VD2000M Manual

Product: