Manual Casals JHP18 (page 17 of 72) (English, German, French, Italian, Portuguese, Spanish)

727556

Zoom out

Zoom in

1/72

JHP18

- Open the soap bottle and ll it with an ade-

quate cleaning product, suitable for this kind of

products. Secondly, turn the pressure rib to the

right to lower the pressure on the spray nozzle

so it can take the detergent and use it to clean

(Fig. 7).

- To remove the appliance from taking detergent,

turn the pressure ring to gain pressure and stop it.

ANGLE TO THE CLEANING SURFACE

- For your knowing, maximum impact of water

to the surface you want to clean is when you

point perpendicularly the surface. However, this

high impact may cause the dust particles to get

imbed in the surface, difculting the cleaning

operation you want to do.

- The optimum angle for spraying water against a

cleaning surface is 45 degrees.

- Distance from cleaning surface

- The optimum cleaning distance is 50 cm away

from the surface. However, if the dirt is not

removed with this distance, you can get closer,

so the impact force will increase.

- WARNING: if the surface is not strong enough it

could give in, so it could get rumpled.

HOW TO AVOID DAMAGING SURFACE

- By controlling the parameters explained before,

you can adjust the hitting force of the water

stream, so then you can regulate. The best way

is to start with a complet 60º of the nozzle, at

45º and 50 cm away. Then you can start modi-

fying these parameters.

OPERATION

- Mount the appliance acoording to the mounting

the appliance section on this manual.

- Prepare the appliance to the suitable use you

need to do.

SURFACE PREPARATION

- Before starting, make sure the cleaning surface

is prepared to be cleaned. Also prepare the

environment. If there are plants or trees, be

assured to cover them with drop clothes. This

will ensure that your plants are not sprayed with

detergent.

INITIAL HIGH-PRESSURE RINSE

- Adjust the spry nozzle to a wide fan position so

you won’t apply too much concentrated spray to

the surface and avoid to damage the surface.

DETERGENT APPLICATION

- WARNING: Always use the appropriate

instructions or model purchased. See them in

detergent applications section.

- WARNING: Follow the detergent manufacturer’s

label instructions in order to mix the correct pro-

portions between water and dtetergnt (normally

around 5% detergent per 95% water).

FINAL RINSE

- Once you nished applying detergent, change

the detergent applicator (depending on model)

or raise the pressure on the spray nozzle,

and use water to wash up and remove all the

detergent.

AFTER-USE

- Turn the appliance off and disconnect I from the

mains and the water supply.

- Trigger the gun to depressurize the system so

no damage can occure while dismounting the

appliance.

- CAUTION: Never turn the water supply off

without turning off the appliance. Serious dama-

ge can be caused to the pump and/or motor.

- WARNING: Despressurize the system every

time before dismounting the appliance.

- After each use, wipe all surfaces with a clean,

dry cloth.

MAINTENANCE AND CLEANING

- Clean and wipe the exterior of the appliance

and all accessories removing all remaining

water with a drop cloth.

- Regularly check for obvious defects suhch as

loose xings and worn or damaged compo-

nents.

- Empty the detergent tank and clean it with

current water, so all the remaining detergent is

wiped out.

STORAGE

- Do not store pressure washers outdoors.

- Do not store pressure washers where it may

freeze.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Casals JHP18 in the language / languages: English, German, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 5,52 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Casals JHP18 Manual

Product: