Manual Casals ID500REA (page 5 of 24) (English, French, Portuguese, Spanish)

799546

Zoom out

Zoom in

1/24

Auxiliary Operation

When working always use the auxiliary handle (G).

The depth can be set with the depth stop (H).

Thereby loosen the winged screw by turning the

auxiliary handle (G) counter clockwise.

Set de required drilling depth.

Tighten the winged screw by turning the auxiliary

handle (G) clockwise.

Insert a drill bit:

To open the drill’s chuck, whilst completely

switched off, insert the chuck key into one of the 3

holes on the top of the chuck. Align the gear of the

chuck key to the gear on the chuck. Turn counter

clockwise (CCW) to open and clockwise (CW) to

close the chuck.

Insert the drill bit, screwdriver bit, or other tool/

accessory required for the task, into the chuck. In

order to obtain a secure fastening of the bit, insert

the bit as far as you can into the chuck. Use the

chuck key to tighten the chuck and lock the bit into

place by turning the chuck key clockwise (CW).

- In order to remove accessories from the chuck,

follow the same steps as indicated previously but

in reverse order.

Screwing, drilling/unscrewing:

To drill or screw, ALWAYS have the direction set to

clockwise (CW).

To unscrew, set the direction to counter clockwise

(CCW).

The appliance should not be in use when changing

the screwing direction.

Rotation direction change:

Do not change the direction of the rotation whilst

the tool motor is in operation.

The appliance has a selector (D), which allows the

direction of rotation to be changed.

Electronic speed control:

The speed of the appliance can be regulated by

using the speed regulator control (A). This function

is very useful, as it makes it possible to adapt the

speed of the appliance to the type of work that

needs to be done.

If the appliance works continuously at low speed,

working life of the appliance will be reduced con-

siderably.

Drilling, Driving and Impact Drilling:

Drilling and driving

Shift button (E) to the area marked by

Impact drilling

Shift button (E) to the area marked by

Use:

Connect the appliance to the mains.

Select the appliance function desired.

Select the desired speed.

Turn the appliance on, by using the on/off button

Locking button:

To activate this function press button (C) while

holding down the start-up switch.

To deactivate this function press the start-up switch

right down.

Once you have nished using the appliance:

Stop the appliance by releasing the on/off switch.

Cleaning

Disconnect the appliance from the mains and allow

it to cool before undertaking any cleaning task.

Clean the electrical equipment and the mains con-

nection with a damp cloth and dry.

DO NOT IMMERSE IN WATER OR ANY OTHER

LIQUID.

Clean the equipment with a damp cloth with a few

drops of washing-up liquid and then dry.

Do not use solvents, or products with an acid or

base pH such as bleach, or abrasive products, for

cleaning the appliance.

Do not let water or any other liquid get into the air

vents to avoid damage to the inner parts of the

appliance.

Never submerge the appliance in water or any

other liquid or place it under running water.

If the appliance is not in good condition of cleanli-

ness, its surface may degrade and inexorably

affect the duration of the appliance’s useful life and

could become unsafe to use.

Supplies

Always use original supplies, designed specically

for your appliance model.

These supplies are available in specialist shops.

Anomalies and repair

Take the appliance to an authorised technical sup-

port service if a product damage or other problems

arise. Do not try to dismantle or repair without

assistance, as this may be dangerous.

If the connection to the mains has been damaged,

it must be replaced and you should proceed as you

would in the case of damage.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Casals ID500REA in the language / languages: English, French, Portuguese, Spanish as an attachment in your email.

The manual is 1.45 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Casals ID500REA Manual

Product: